Diketopyrrolopyrrole‐based liquid crystalline conjugated donor–acceptor copolymers with reduced band gap for polymer solar cells

A new liquid crystalline (LC) acceptor monomer 2,5‐bis[4‐(4′‐cyanobiphenyloxy)dodecyl]‐3,6‐dithiophen‐2‐yl‐pyrrolo[3,4‐c]pyrrole‐1,4‐dione (TDPPcbp) was synthesized by incorporating cyanobiphenyl mesogens into diketopyrrolopyrrole (DPP). The monomer was copolymerized with bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′] dithiophene (BDT) and N‐9′‐heptadecanylcarbazole (CB) donors to obtain donor–acceptor alternating copolymers poly[4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene‐alt‐3,6‐bis(thiophen‐5‐yl)‐2,5‐bis[4‐(4′‐cyanobiphenyloxy)dodecyl]‐2,5‐dihydropyrrolo[3,4‐c]pyrrole‐1,4‐dione] (PBDTDPPcbp) and poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐3,6‐bis(thiophen‐5‐yl)‐2,5‐bis[4‐(4′‐cyano‐biphenyloxy)dodecyl]‐2,5‐dihydropyrrolo[3, 4‐c]pyrrole‐1,4‐dione] (PCBTDPPcpb) with reduced band gap, respectively. The LC properties of the copolymers, the effects of main chain variation on molecular packing, optical properties, and energy levels were analyzed. Incorporating the mesogen cyanobiphenyl units not only help polymer donors to pack well through mesogen self‐organization but also push the fullerene acceptor to form optimized phase separation. The bulk heterojunction photovoltaicdevicesshow enhanced performance of 1.3% for PBDTDPPcbp and 1.2% for PCBTDPPcbp after thermal annealing. The results indicate that mesogen‐controlled self‐organization is an efficient approach to develop well‐defined morphology and to improve the device performance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,characterization, and electroluminescence of polyfluorene copolymers containing T‐shaped isophorone derivatives

We have successfully synthesized a series of new fluorene‐based copolymers, poly[(9,9‐bis(4‐octyloxy‐phenyl)fluorene‐2,7‐diyl)‐co‐[2(3{2[4(2{4[bis(bromophenyl‐4yl) amino]phenyl}vinyl)‐2,5‐bisoctyloxyphenyl]vinyl}‐5,5‐dimethyl‐cyclohex‐2‐enylidene)malononitrile] (PFTBMs), with varying molar ratios of the low‐energy band gap comonomer, 2(3{2[4(2{4[bis(4‐bromophenyl)amino]phenyl}vinyl)‐2,5‐bisoctyloxyphenyl]vinyl}‐5,5‐dimethyl‐cyclohex‐2‐enylidene)malononitrile (BTBM). To prepare BTBM (which has a T‐shaped structure) from triphenylamine, dialkoxy phenyl, and isophorone, we introduced three individual segments of an isophorone derivative containing two cyanide groups at the carbonyl position, a dialkoxy phenyl group for increased solubility, and a triphenyl amine for effective charge transfer. Furthermore, we introduced vinyl linkages between each segment to increase the length of π‐conjugation. The synthesized polyfluorene copolymers with the BTBM, PFTBMs, were synthesized via palladium‐catalyzed Suzuki coupling reactions. The photoluminescence emission spectra of the synthesized polymers in solution did not show significant energy transfer from PBOPF segments to the BTBM units. Light‐emitting devices based on these polymers were fabricated with an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/polymers/Balq/LiF/Al configuration. Examination of the electroluminescence emission of the synthesized polymers showed that the maximum wavelength shifted continuously toward long wavelengths with as the number of BTBM units in the polymer main chain was increased. In particular, a device using PFTBM 05 exhibited a maximum brightness of 510 cd/m² and a maximum current efficiency of 0.57 cd/A. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 82–90, 2010     

Mesogen‐controlled ion channel of star‐shaped hard–soft block copolymers for solid‐state lithium‐ion battery

Novel star‐shaped hard–soft triblock copolymers, 4‐arm poly(styrene)‐block‐poly [poly(ethylene glycol) methyl ethyl methacrylate]‐block‐poly{x‐[(4‐cyano‐4′‐biphenyl) oxy] alkyl methacrylate} (4PS‐PPEGMA‐PMAxLC) (x = 3, 10), with different mesogen spacer length are prepared by atom‐transfer radical polymerization. The star copolymers comprised three different parts: a hard polystyrene (PS) core to ensure the good mechanical property of the solid‐state polymer, and a soft, mobile poly[poly(ethylene glycol) methyl ethyl methacrylate] (PPEGMA) middle sphere responsible for the high ionic conductivity of the solid polyelectrolytes, and a poly{x‐[(4‐cyano‐4′‐biphenyl)oxy]alkyl methacrylate} with a birefringent mesogens at the end of each arm to tuning the electrolytes morphology. The star‐shaped hard–soft block copolymers fusing hard PS core with soft PPEGMA segment can form a flexible and transparent film with dimensional stability. Thermal annealing from the liquid crystalline states allows the cyanobiphenyl mesogens to induce a good assembly of hard and soft blocks, consequently obtaining uniform nanoscale microphase separation morphology, and the longer spacer is more helpful than the shorter one. There the ionic conductivity has been improved greatly by the orderly continuous channel for efficient ion transportation, especially at the elevated temperature. The copolymer 4PS‐PPEGMA‐PMA10LC shows ionic conductivity value of 1.3 × 10^?4 S cm^?1 (25 °C) after annealed from liquid crystal state, which is higher than that of 4PS‐PPEGMA electrolyte without mesogen groups. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4341–4350     

Synthesis and properties of segmented main‐chain liquid‐crystalline polyurethanes with a high aspect ratio mesogenic diol as a chain extender

Main‐chain liquid‐crystalline polyurethanes were synthesized based on a high aspect ratio mesogenic diol (4‐{[4‐(6‐hydroxyhexyloxy)‐phenylimino]‐methyl}‐benzoic acid 4‐{[4‐(6‐hydroxyhexyloxy)‐phenylimino]‐methyl}‐phenyl ester) as a chain extender; polycaprolactone (PCL) diol soft segments of different number‐average molecular weights (530, 1250, or 2000); and different diisocyanates, including 1,4‐hexamethylene diisocyanate (HMDI), 4,4′‐methylene bis(cyclohexyl isocyanate) (H₁₂MDI), and 4,4′‐methylene bis(phenyl isocyanate) (MDI). The structure of the polymers was confirmed with Fourier transform infrared spectroscopy, and differential scanning calorimetry and polarizing microscopy measurements were carried out to examine the liquid‐crystalline and thermal properties of the polyurethanes, respectively. The mesogenic diol was partially replaced with 20–50 mol % PCL. A 20 mol % mesogen content was sufficient to impart a liquid crystalline property to all the polymers. The partial replacement of the mesogenic diol with PCL of various molecular weights, as well as the various diisocyanates, influenced the phase transitions and the occurrence of mesophase textures. Characteristic liquid‐crystalline textures were observed when a sufficient content of the mesogenic diol was present. Depending on the flexible spacer length and the mesogenic content, grained and threadlike textures were obtained for the HMDI and H₁₂MDI series polymers, whereas the polyurethanes prepared from MDI showed only grained textures for all the compositions. The polymers formed brittle films and could not be subjected to tensile tests. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1527–1538, 2002     

Luminescent mesogen jacketed poly(1‐alkyne) bearing lateral terphenyl with hexyloxy tail

Mesogen jacketed liquid crystalline poly(1‐alkyne) and poly(1‐phenyl‐1‐alkyne) linked pendants of terphenyl mesogens with hexyloxy tails at the waist position (? {RC?C? [(CH₂)₃OOC‐terpheyl‐(OC₆H₁₃)₂]}_n? , where R?H, PHATP(OC6)2 ; R?C₆H₅, PPATP(OC6)2 ) were synthesized. The influences of structural variations on the thermal, mesomorphic, and luminescent properties were investigated. Polymerizations of all monomers are carried out by WCl₆‐Ph₄Sn catalysts successfully. The polymers are stable (T_d ≥ 340 °C) and soluble in common solvents. The monomers and polymers show enantiotropic SmA phases in the heating and cooling processes, and the lateral side chains of the mesogenic units are perpendicular to the main chain. The “jacket effect” of chromophoric terphenyl core “shell” around the main chain also contributes to polymers with high photoluminescence, and the pendant‐to‐backbone energy transfer path is involved in the luminescence process of this polymers. In comparison with monosubstituted polyacetylene PHATP(OC6)2 , the disubstituted polyacetylene PPATP(OC6)2 shows better photoluminescence in both THF solution and film, and exhibited about 40 nm red‐shifted than PHATP(OC6)2 , indicating that the “jacket effect” of terphenyl mesogens forces poly(1‐phenyl‐1‐alkyne) backbone to extend in a more planar conformation with a better conjugation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Relationship between the liquid crystallinity and field‐effect‐transistor behavior of fluorene–thiophene‐based conjugated copolymers

A series of fluorene–thiophene‐based semiconducting materials, poly(9,9′‐dioctylfluorene‐alt‐α,α′‐bisthieno[3,2‐b]thiophene) (F8TT2), poly(9,9′‐di(3,6‐dioxaheptyl)fluorene‐alt‐thieno[3,2‐b]thiophene) (BDOHF8TT), poly(9,9′‐di(3,6‐dioxaheptyl)fluorene‐alt‐bithiophene) (BDOHF8T2), and poly(9,9′‐dioctylfluorene‐co‐bithiophene‐co‐[4‐(2‐ethylhexyloxyl)phenyl]diphenylamine) (F8T2TPA), was synthesized through a palladium‐catalyzed Suzuki coupling reaction. F8TT2, BDOHF8TT, BDOHF8T2, and F8T2TPA films exhibited photoluminescence maxima at 523, 550, 522, and 559 nm, respectively. Solution‐processed field‐effect transistors (FETs) fabricated with all the copolymers except F8T2TPA showed p‐type organic FET characteristics. Studies of the differential scanning calorimetry scans and FETs of the polymers revealed that more crystalline polymers gave better FET device performance. The greater planarity and rigidity of thieno[3,2‐b]thiophene in comparison with bithiophene resulted in higher crystallinity of the polymer backbone, which led to improved FET performance. On the other hand, the random incorporation of the triphenylamine moiety into F8T2TPA caused the polymer chains to lose crystallinity, resulting in an absence of FET characteristics. With this study, we could assess the liquid‐crystallinity dependence of the field‐effect carrier mobility on organic FETs based on liquid‐crystalline copolymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4709–4721, 2006     

Preparation of poly(2‐anilinoethanol) containing azobenzene group under electrical field and its liquid crystalline properties investigation

In this project, 2‐[N‐ethyl‐N‐[4‐[(4′‐nitrophenyl)azo]‐phenyl]amino]ethanol (Disperse Red‐I) was prepared by adding of (N‐ethyl‐2‐anilinoethanol) with the salt diazonium p‐nitroaniline. The main mesogenic liquid crystalline (LC) 2‐[N‐ethyl‐N‐[4‐[4′‐nitrophenyl)azo]‐phenyl]amino]ethyl‐3‐chloro propionate (Disperse Red‐II) was synthesized by reaction of disperse Red I and 3‐chloropropanoeic acid at the alkaline condition. Then 2‐anilinoethyl‐3‐chloropropionate‐{2‐[ethyl[4‐[(4′‐nitrophenyl)azo]phenyl]amino] ethanol}, (2AECP‐Red‐I) was prepared via reaction of disperse red‐II and 2‐anilinoethanol. On the other hand, poly 2‐anilinoethyl‐3‐chloropropionate‐{2‐[ethyl[4‐[(4′‐nitrophenyl)azo]phenyl]amino]ethanol} and poly(2AECP‐Red‐I) have been synthesized by polymerization of 2AECP‐Red‐I in two separate schemes. These include polymerization in the absence of electric field (EF) and polymerization under different EFs. A comparison of the results reveals that the polymer produced under electric field is more linear, regular in shape with high electrical conductivity, as well as good LC behavior with semectic texture. The resulted monomer and poly(2AECP‐Red‐I) are characterized by using Fourier transform infrared and ultraviolet–visible and were studied by thermogravimetric analysis and differential scanning calorimetry. Scanning electron microscopy images supported the formation of poly(2AECP‐Red‐I) and showed morphology feature and homogeneous structure on poly(2AECP‐Red‐I). Electrical conductivity of poly(2AECP‐Red‐I) has been studied by four‐point probe method. Copyright © 2014 John Wiley & Sons, Ltd.     

Functionally integrated liquid crystalline photochromic triple block copolymer with locally light‐ and thermal‐controllable sub‐blocks

Photoorientation and reorientation processes induced by illumination of the samples with oppositely directed polarized light and by the thermal treatment were studied for the films of triblock copolymer pAzo₁₀‐b‐pPhM₈₀‐b‐pAzo₁₀ consisting of a nematic phenyl benzoate сentral sub‐block (PhM, DP = 80) with two terminal smectic azobenzene sub‐blocks (Azo, DP = 10). For amorphized films of triblock copolymer, illumination with polarized light (λ = 546 nm) is shown to be by orientation of only Azo‐containing groups, but upon following annealing of the film, PhM groups are adjusted to the orientation of Azo fragments. It was found, that the subsequent illumination of the block copolymer sample with oppositely directed polarized light changes the orientation of azobenzene groups, while the orientation of phenyl benzoate groups is remained unchanged. Thus, the cyclic illumination of the triblock copolymer samples by the linear polarized light and subsequent thermal treatment make it possible to control and fix orientation of azobenzene and phenyl benzoate groups located in different sub‐blocks in the desired and independent manner. The comparison of these results with the data on random p(Azo₇‐ran‐PhM₃₀) copolymer of the similar composition revealed, that in the random copolymer, both Azo and PhM mesogenic groups are involved in the orientational cooperative process regardless of films process treatment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1602–1611     

Fluorene‐based liquid crystalline networks with linearly polarized blue emission

A series of fluorene‐based luminophores containing methacrylic end groups have been prepared and incorporated into uniaxially oriented liquid crystalline films by in situ photopolymerization. Various structural modifications on the 2‐(4‐cyanophenyl)fluorene core, which include alkyl chains at the 9‐position and elongation of the rigid core with one additional phenyl ring, have been investigated to generate emitters with adjusted liquid crystal compatibility, improved luminescence and dichroic properties. Polarized blue‐emitting films were produced that had an acceptable photostability, and it was found that the polarization emission was better for samples with low (5%) cross‐linker contents. Polarization of the luminescence was favored by the liquid crystalline properties of the luminophore. In addition, the detrimental effect of the alkyl substituent at the fluorene core on the mesomorphism and on the emission polarization can be overcome by lengthening the π‐system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4804–4817, 2007     

Synthesis and properties of azobenzene‐containing poly(1‐alkyne)s with different functional pendant groups

1‐Alkynes containing azobenzene mesogenic moieties [HC?C(CH₂)₉? O? ph? N?N? ph? O? R; R = ethyl ( 1 ), octyl ( 2 ), decyl ( 3 ), (S)‐2‐methylbutyl ( 4 ), or (S)‐1‐ethoxy‐1‐oxopropan‐2‐yl ( 5 ); ph = 1,4‐phenyl] were synthesized and polymerized in the presence of a Rh catalyst {(nbd)Rh⁺[B(C₆H5)₄]^?; nbd = 2,5‐norbornadiene} to yield a series of liquid‐crystalline polymers in high yields (e.g., >75%). These polymers had moderate molecular weights (number‐average molecular weight ≥ 12,000), high cis contents in the main chain (up to 83%), good thermal stability, and good solubility in common organic solvents, such as tetrahydrofuran, chloroform, and dichloromethane. These polymers were thoroughly characterized by a combination of infrared, nuclear magnetic resonance, thermogravimetric analysis, differential scanning calorimetry, polarized optical microscopy, and two‐dimensional wide‐angle X‐ray diffraction techniques. The liquid‐crystalline behavior of these polymers was dependent on the tail group attached to the azobenzene structure. Poly‐ 1 , which had the shortest tail group, that is, an ethyl group, showed a smectic A mesophase, whereas poly‐ 2 , poly‐ 3 , and poly‐ 5 , which had longer or chiral tail groups, formed smectic C mesophases, and poly‐ 4 , which had another chiral group attached to the azobenzene structure, showed a chiral smectic C mesophase in both the heating and cooling processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4532–4545, 2006     

Structure–property studies and orientation effects of polythiophenes containing mesogenic side chains

Liquid crystalline materials display unique properties, which can be exploited in organic light emitting diodes. Polythiophene model compounds containing phenyl groups linked with azomethine, ester, and alkoxy groups [thiophene‐3‐alkyloxy benzoyloxy aniline series (N series) and thiophene‐3‐alkoxy phenoxy amino benzoate series (R Series)] were synthesized. Molecular orbital calculations were performed and the predicted band gaps compared to understand the effects of spacer length and linkage. The experimental photoabsorption characteristics are compared with the theoretically predicted band gap. Photoabsorption and emission studies on N series and R series polymers as the function of polarizer angle suggest that polymers of both series emit polarized light in all base color ranges. The electroemission characteristics of the above‐synthesized polymers were also recorded as the function of polarizer angle. The results show that the compounds also emit polarized electroemission, and the EL polarization ratio decreases with the increase of alkoxy chain length for N and R polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1463–1477, 2008     

Synthesis and properties of mesogen‐jacketed liquid crystalline polymers containing biphenyl mesogen with asymmetric substitutions

This work focuses on the design, synthesis, and characterization of a series of mesogen‐jacketed liquid crystalline polymers (MJLCPs), poly(alkyl 4′‐(octyloxy)‐2‐vinylbiphenyl‐4‐carboxylate) (pVBP(m,8), m = 1, 2, 4, 6, 8, 10, 12). For the first time, we realized asymmetric substitutions in the mesogens of MJLCPs. The polymers obtained by conventional free radical polymerization were investigated in detail by a combination of various techniques, such as differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized light microscopy. Our results showed that all the polymers were thermally stable, and their glass transition temperatures decreased when m increased. The liquid crystalline (LC) phases that developed at high temperatures and disappeared at low temperatures were strongly dependent on the difference in lengths of alkyl groups on the 4 and 4′ substitution positions of the side‐chain biphenyl. While polymer pVBP(1,8) was not liquid crystalline, columnar liquid crystalline phases were observed for all other pVBP(m,8) (m = 2, 4, 6, 8, 10, 12) polymers. Polymer pVBP(8,8) showed a tetragonal columnar nematic liquid crystalline phase, and the other LC polymers exhibited columnar nematic phases. In additions, the smaller the difference in the lengths of the terminal alkyls, the easier the development of the liquid crystalline phase. Birefringence measurements showed that solution‐cast polymer films exhibited moderately high positive birefringence values, indicating potential applications as optical compensation films for liquid crystal displays. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Influence of fluorinated substituent and terminal length on phase behavior of mesogen‐jacketed liquid crystalline polymers with a biphenyl mesogen

A series of mesogen‐jacketed liquid crystalline polymers, poly{2,2,3,3,4,4,4‐heptafluorobutyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PF3Cm, where m is the number of carbon atoms in the alkoxy groups, and m = 1, 4, 6, and 8), the side chain of which contains a biphenyl core with a fluorocarbon substituent at one end and an alkoxy unit of varying length on the other end, were designed and successfully synthesized via atom transfer radical polymerization. For comparison, poly{butyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PC4Cm), similar to PF3Cm but with a butyl group instead of the fluorocarbon substituent, was also prepared. Differential scanning calorimetric results reveal that the glass transition temperatures (T_gs) of the two series of polymers decrease as m increases and T_gs of the fluorocarbon‐substituted polymers are higher than those of the corresponding butyl‐substituted polymers. Wide‐angle X‐ray diffraction measurements show that the mesophase structures of these polymers are dependent on the number of the carbon atoms in the fluorocarbon substituent and the property of the other terminal substituent. Polymers with fluorocarbon substituents enter into columnar nematic phases when m ≥ 4, whereas the polymer PF3C1 exhibits no liquid crystallinity. For polymers with butyl substituents, columnar nematic phases form when the number of carbon atoms at both ends of the side chain is not equal at high temperatures and disappear after the polymers are cooled to ambient temperature. However, when the polymer has the same number of carbon atoms at both ends of the side chain, a hexagonal columnar phase develops, and this phase remains after the polymer is cooled. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and properties of comb polymers with semirigid mesogen‐jacketed polymers as side chains

A series of novel comb polymers, poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene}‐g‐polystyrene (PMPCS‐g‐PS), with mesogen‐jacketed rigid side chains were synthesized by the “grafting onto” method from α‐yne‐terminated PMPCS (side chain) and poly(vinylbenzyl azide) (backbone) by Cu(I)‐catalyzed 1,3‐dipolar cycloaddition click reaction. The α‐yne‐terminated PMPCS was synthesized by Cu(I)‐catalyzed atom transfer radical polymerization initiated by a yne‐functional initiator. Poly(vinylbenzyl azide) was prepared by polymerizing vinylbenzyl chloride using nitroxide mediated radical polymerization to obtain poly(vinylbenzyl chloride) as the precursor which was then converted to the azide derivative. The chemical structure and architectures of PMPCS comb polymers were confirmed by ¹H NMR, gel permeation chromatography, and multiangle laser light scattering. Both surface morphologies and solution behaviors were investigated. Surface morphologies of PMPCS combs on different surfaces were investigated by scanning probe microscopy. PMPCS combs showed different aggregation morphologies when depositing on silicon wafers with/without chemical modification. The PMPCS comb polymers transferred to polymer‐modified silicon wafers using the Langmuir‐Blodgett technique showed a worm‐like chain conformation. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Side‐chain supramolecular polymers with induced supramolecular chirality through H‐bonding interactions

Side‐chain supramolecular polymers that show columnar mesomorphism have been prepared through H‐bonding interactions between a polyvinylpyridine polymer as H‐acceptor and different H‐donors derived from benzoic acid. These compounds have been designed according to a promesogenic structure, that is, either disk‐like or banana‐like, to promote stacking and therefore the formation of columnar arrangements. IR studies confirmed the formation of H‐bonds and demonstrated that the H‐bond intensity decreases upon increasing temperature. The mesophase organizations were studied by polarized optical microscopy, differential scanning calorimetry, and X‐ray diffraction. Associations containing poly‐3‐methyl‐4‐vinylpyridine showed supramolecular optical activity, as evidenced by circular dichroism studies on thin films. It is proposed that these supramolecular polymers adopt a helical structure that can be biased toward a given handedness by virtue of the configuration of the stereogenic centers in the peripheral tails of the acids. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5528–5541, 2008     

Novel side‐chain liquid‐crystalline polyimide for film materials

A novel side‐chain liquid‐crystalline polyimide (SLCPI) was prepared via copolycondensation from 3,5‐diamino‐benzonic‐4′‐biphenyl ester, 4,4′‐diamino‐ biphenyl ether, and 3,3′,4,4′‐oxydiphthalic dianhydride. The energy‐minimized structure and liquid crystallinity of SLCPI were investigated by molecular modeling, differential scanning calorimetry (DSC), wide‐angle X‐ray scattering, and polarized optical microscopy, respectively. The results indicated that this polyimide (PI) with side‐chain mesogenic units exhibited a nematic NI phase. Because of the in situ self‐reinforcement of side‐chain mesogenic units, the improved tensile strength and modulus of PI films reached 270% and 300%, respectively. The coefficient of thermal expansion of films decreased by 40%. DSC and thermogravimetric analyses indicated that the phase‐transition temperature of SLCPI was above 240 °C, and the 5% weight‐loss temperature was above 520 °C. Moreover, copolycondensation of two diamines with dianhydride and incorporation of pendent mesogenic units diminished the regularity and symmetry of main chains; as a result, SLCPI exhibits good film processability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 554–559, 2003     

Highly stable rigid main‐chain nonlinear optical polymers with nematic phase: Effect of liquid‐crystalline phase on nonlinear optical response

Nonlinear optical (NLO) rigid main‐chain polyesters containing azobenzene mesogens with high thermal and temporal stabilities were synthesized from derivatives of hydroxyphenylazobenzoic acid. The NLO properties of the homopolymer, poly[4‐(4‐hydroxy‐3‐methyl phenyl)azo]benzoic acid, and copolymers of 4‐[(4‐hydroxy‐3‐methylphenyl)azo]benzoic acid, 4‐[(4‐hydroxy‐2‐methylphenyl)azo]benzoic acid, and 4‐[(4‐hydroxy‐2‐pentadecyl phenyl)azo]benzoic acid (PSCpHBA) with p‐HBA were measured by the Maker fringe technique. The thermal and liquid‐crystalline (LC) phase behaviors of the polymers were examined by differential scanning calorimetry, a thermal‐stimulated polarization current, and polarized light microscopy. The polymers except PSCpHBA exhibited nematic‐threaded and Schlieren textures. The LC orientations give rise to an enhanced NLO response. The polymers had high thermal and temporal stabilities for second‐harmonic generation activity because of their rigid aromatic backbone. This study suggests that the rigid aromatic main chain exhibiting an LC phase is a promising simple method to synthesize highly stable NLO polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1527–1535, 2003     

A novel mesogen‐jacketed liquid crystalline electroluminescent polymer with both thiophene and oxadiazole in conjugated side chain

Mesogen‐jacketed liquid crystalline polymers (MJLCPs) with both electron‐transport oxadiazole and hole‐transport thiophene in the side chain were reported for their promising electroluminescent property. Monomers of 2,5‐bis{5‐[(4‐alkoxyphenyl)‐1,3,4‐oxadiazole]thiophen‐2‐yl}styrene (M‐Cm, m is the number of the carbons in the alkoxy groups, m = 8,10) were synthesized and confirmed by ¹H‐NMR, mass spectrometry, and elemental analysis. The corresponding polymers were successfully obtained and characterized by thermal analysis, optical spectroscopy, cyclic voltammetry, electroluminescent analysis, polarized light microscopy (PLM), and wide‐angle X‐ray diffraction (WAXD). The polymers exhibited high decomposition temperatures reaching 382 °C and high T_g's reaching 184 °C. The absorption spectra indicated that both the monomers and polymers had little aggregation in film than that in solution, and the absorption spectra of the polymers showed an obvious blue‐shift compared with those of the monomers. Both the monomers and the polymers had blue‐green emission, and the photoluminescence spectra of the polymers in film suggested the formation of excimer or exciplex. The polymers showed lower HOMO energy levels and LUMO energy levels than those of the MJLCPs containing oxadiazole unit reported before. Electroluminescence study with the device configuration of ITO/PEDOT/PVK/polymer/TPBI/Ca/Ag showed maximum brightness and current efficiency of 541 cd/m² and 0.10 cd/A, which proved that the introduction of directly connected electron‐ and hole‐transport units could greatly improve the EL property of side‐chain conjugated polymers. The phase structures of the polymers were confirmed to be smectic A phase through the results of PLM and WAXD. The annealed samples emitted polarized photoluminescence at room temperature, which indicated potential utility for practical applications in display. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1502–1515, 2010     

Enhanced photochemical‐shift of reflection band from an inverse opal film based on larger birefringent polymer liquid crystals: Effect of tolane group on the photochemical shift behavior

Photo‐chemically tunable photonic band gap materials are prepared by infiltration of liquid crystal polymers having azobenzene groups into voids of SiO₂ inverse opal films. Linearly polarized (LP) light irradiation results in transformation from a random to an anisotropic molecular orientation of azobenzene side chains in the voids of the SiO₂ inverse opal film, leading to the reversible and stable shift of the reflection peak to longer wavelength more than 15 nm. To improve switching properties, we use copolymers of azobenzene monomer and tolane monomer, which have higher birefringence, as infiltration materials into the voids. The azobenzene‐tolane copolymers are found to show higher birefringence than azobenzene homopolymers by the LP light irradiation at higher temperature. Consequently, the reflection band of the SiO₂ inverse opal film infiltrated with the azobenzene‐tolane copolymer can be shifted to longer wavelength region more than 55 nm by the irradiation of LP light. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1981–1990, 2009     

Synthesis and chiroptical properties of optically active polymer liquid crystals containing azobenzene chromophores

A series of optically active methacrylic homopolymers, poly[(4‐{4′‐[(S)‐2‐methyl‐1‐butyloxycarbonyl]phenylazo}phenoxyl)x‐methylene methacrylate] (x = 0, 2, 6, or 11), were synthesized. The structures of the polymers were characterized by IR, ¹H NMR, UV, differential scanning calorimetry, and gel permeation chromatography. The chiroptical properties of the polymers in films were investigated with circular dichroism (CD) measurements. The CD and UV spectra of the films suggested that CD absorptions occurred in the films of the polymers with long spacers (x = 6 or 11) but not in the films of the polymers with short spacers (x = 0 or 2). After irradiation with linearly polarized light at 442 nm, the CD values were amplified in all the polymeric films. The amplificatory values of the CD bands in the absorption region (260–360 nm) of azobenzene chromophores suggested that the spacer length had an effect on both the transfer of chirality and photoinduced chirality in the polymeric films. The largest level of photoinduced chirality was induced in the polymer containing six methylene units. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3210–3219, 2006