Side‐chain terpyridine polymers through atom transfer radical polymerization and their ruthenium complexes

Polymers containing side‐chain terpyridine ligands of well‐defined architectures and controllable molecular weights and molecular weight distributions are reported. These polymers were synthesized by the atom transfer radical polymerization (ATRP) of a newly synthesized terpyridine monomer with three functional initiators. The obtained polymers were characterized with ¹H NMR and gel permeation chromatography techniques. The efficiency of the ATRP technique and the overall control of the molecular characteristics of the polymers were demonstrated by a kinetic study of the polymerization reaction. Subsequently, the ruthenium(III)/ruthenium(II) complexation chemistry was employed for the attachment of bis(dodecyloxy)‐functionalized terpyridine moieties onto each side 2,2′:6′,2″‐terpyridine unit of the main polymeric backbone. Thus, the grafting approach was successfully combined with the metal–ligand coordination chemistry for the preparation of highly soluble polymeric complexes. The resulting complexes were fully characterized by means of ¹H NMR, gel permeation chromatography, and ultraviolet–visible spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4838–4848, 2005     

Synthesis of PMMA‐b‐PBA block copolymer in homogeneous and miniemulsion systems by DPE controlled radical polymerization

In this research, poly(methyl methacrylate)‐b‐poly(butyl acrylate) (PMMA‐b‐PBA) block copolymers were prepared by 1,1‐diphenylethene (DPE) controlled radical polymerization in homogeneous and miniemulsion systems. First, monomer methyl methacrylate (MMA), initiator 2,2′‐azobisisobutyronitrile (AIBN) and a control agent DPE were bulk polymerized to form the DPE‐containing PMMA macroinitiator. Then the DPE‐containing PMMA was heated in the presence of a second monomer BA, the block copolymer was synthesized successfully. The effects of solvent and polymerization methods (homogeneous polymerization or miniemulsion polymerization) on the reaction rate, controlled living character, molecular weight (M_n) and molecular weight distribution (PDI) of polymers throughout the polymerization were studied and discussed. The results showed that, increasing the amounts of solvent reduced the reaction rate and viscosity of the polymerization system. It allowed more activation–deactivation cycles to occur at a given conversion thus better controlled living character and narrower molecular weight distribution of polymers were demonstrated throughout the polymerization. Furthermore, the polymerization carried out in miniemulsion system exhibited higher reaction rate and better controlled living character than those in homogeneous system. It was attributed to the compartmentalization of growing radicals and the enhanced deactivation reaction of DPE controlled radical polymerization in miniemulsified droplets. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4435–4445, 2009     

1,4‐Dilithio‐1,1,4,4‐tetraphenylbutane in diethyl ether: An effective initiator for the living anionic polymerization of dienes

The anionic polymerization of butadiene initiated with 1,4‐dilithio‐1,1,4,4‐tetraphenylbutane (LiTPB) in diethyl ether (DEE) gives polybutadiene (PBD) with high 1,2 content (>70%), narrow polydispersities (1.04 < M_w/M_n < 1.20), and predicted molecular weights. In THF, this polymerization does not work very well. After removal of DEE and addition of THF, the PBD dianion is end capped quantitatively by addition of 1,1‐diphenylethylene (DPE) to give the diphenylalkyl end capped PBD dianion. Subsequent addition of methyl methacrylate at low temperatures results in the formation of well‐defined PMMA‐b‐PBD‐b‐PMMA triblock copolymers. The results are accounted for by taking into account the effects of Li ion solvation on the BD initiation and end capping of the PBD anion by DPE. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2198–2206, 2009     

Facile synthesis of controlled‐structure primary amine‐based methacrylamide polymers via the reversible addition‐fragmentation chain transfer process

We report here a novel direct method for the syntheses of primary aminoalkyl methacrylamides that requires mild reagents and no protecting group chemistry. The reversible addition‐fragmentation chain transfer polymerization (RAFT) of the aminoalkyl methacrylamide revealed to be highly efficient with 4‐cyanopentanoic acid dithiobenzoate (CTP) as chain transfer agent and 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) as initiator. Cationic amino‐based homopolymers of reasonably narrow polydispersities (M_w/M_n < 1.30) and predetermined molecular weights were obtained without recourse to any protecting group chemistry. A range of block and random copolymers were also synthesized via the RAFT process. The homopolymers and copolymers were characterized by aqueous conventional and triple detection gel permeation chromatography systems. Furthermore, the primary amine‐based methacrylamide monomers and polymers revealed to be highly stable both with the primary amino group in the protonated and deprotonated form. We have also demonstrated that stabilized gold nanoparticles can be generated with the RAFT‐synthesized amine‐based polymers via a photochemical process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4984–4996, 2008     

A Homotelechelic bis‐terpyridine macroligand: One‐step synthesis and its metallo‐supramolecular self‐assembly

A homotelechelic macroligand bearing two 2,2′:6′,2″‐terpyridin‐4′‐yl units, as chain ends, is used as building block for the preparation of a linear metallo‐supramolecular chain‐extended polymer. The macroligand has been prepared by nitroxide‐mediated polymerization (NMP) of styrene using a bis‐terpyridine‐functionalized NMP initiator. The controlled character of the NMP process has been confirmed by detailed characterization of the polymer by size‐exclusion chromatography, nuclear magnetic resonance spectroscopy as well as mass spectrometry. Subsequently, the self‐assembly with Fe^II ions into the chain‐extended metallopolymer and the disassembly thereof, in the presence of a strong competitive ligand, has been studied by UV–vis absorption spectroscopy and diffusion‐ordered NMR spectroscopy. The reversibility of the formation of the metallo‐supramolecular material, when addressed by external stimuli, could be proven. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

New way of presenting the universal calibration of gel permeation chromatography to include macromolecules with very high segment density

The universal calibration of gel permeation chromatography presents deviations when star‐shaped polymers are used, especially when they present high segment density. Polymers presenting high segment density also have higher values of Flory's parameter Φ than the corresponding flexible, linear polymers. This deviation disappears if we express the hydrodynamic volume of the polymers with the quantity [η]M/Φ (where [η] is the intrinsic viscosity and M is the molecular mass) instead of the commonly used quantity [η]M. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2388–2391, 2005     

Synthesis and kinetic analysis of DPE controlled radical polymerization of MMA

The 1,1‐diphenylethene (DPE) controlled radical polymerization of methyl methacrylate was performed at 80 °C by using AIBN as an initiator and DPE as a control agent. It was found that the molecular weight of polymer remained constant with monomer conversion throughout the polymerization regardless of the amounts of DPE and initiator in formulation. To understand the result of constant molecular weight of living polymers in DPE controlled radical polymerization, a living kinetic model was established in this research to evaluate all the rate constants involved in the DPE mechanism. The rate constant k₂, corresponding to the reactivation reaction of the DPE capped dormant chains, was found to be very small at 80 °C (1 × 10^?5 s^?1), that accounted for the result of constant molecular weight of polymers throughout the polymerization, analogous to a traditional free radical polymerization system that polymer chains were terminated by chain transfer. The polydispersity index (PDI) of living polymers was well controlled <1.5. The low PDI of obtained living polymers was due to the fact that the rate of growing chains capped by DPE was comparable with the rate of propagation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Polystyrene with Pendant Mixed Functional Ruthenium(II)‐Terpyridine Complexes

A vinyl substituted 2,2′:6′,2″‐terpyridine and a mixed, bifunctional ruthenium(II)‐terpyridine complex bearing a vinyl and a hydroxymethyl group are utilized as comonomers for radical copolymerization with styrene. The resulting polymers are characterized by means of UV‐vis spectroscopy and gel permeation chromatography, coupled with an in‐line diode array spectrophotometer.     

Synthesis and characterization of PEE‐PEO diblock copolymers with complementary end‐groups for hydrogen‐bond heteroassociation

Poly(ethylethylene‐b‐ethylene oxide) (PEE‐PEO) diblock copolymers with pyridine‐benzoic acid end‐groups for heterodimeric hydrogen bonding were designed as a possible means to noncentrosymmetric organizations by spontaneous self‐assembly. These end‐functionalized polymers were synthesized by anionic living polymerization with protected initiator and terminating reagents. A series of polymeric intermediates with different end‐groups was characterized by proton nuclear magnetic resonance, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and gel permeation chromatography. Preliminary studies of solid‐state organization by differential scanning calorimetry and small‐angle X‐ray scattering provided evidence for a long‐range order that was sensitive to chain length, copolymer composition, and end‐group structure. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 207–219, 2000     

The LEGO toolbox: Supramolecular building blocks by nitroxide‐mediated controlled radical polymerization

A terpyridine‐functionalized alkoxyamine unimolecular initiator was used for the nitroxide‐mediated controlled living radical polymerization of n‐butylacrylate, N,N‐dimethylacrylamide, 4‐vinylpyridine, 2‐vinylpyridine, and isoprene. For the former three monomers, the kinetics were studied. All polymerizations resulted in well‐defined polymers having a single terpyridine ligand at the chain end and narrow polydispersity indices. The obtained polymers are valuable building blocks for metallo‐supramolecular polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6331–6344, 2005     

Modification of the universal calibration of gel permeation chromatography to include macromolecules presenting a draining effect

A new universal calibration for gel permeation chromatography is proposed in which the hydrodynamic volume of the macromolecular chains is expressed by the quantity [η]M/Φ instead of the commonly used quantity [η]M (where [η] is the intrinsic viscosity, M is the molecular mass, and Φ is Flory's parameter). Introducing Φ into the hydrodynamic volume is necessary because its value changes from one polymer to another when the polymers present a certain draining effect. The proposed procedure also allows the determination of Φ of any wormlike polymer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 707–710, 2003     

Core‐shell nanoparticles with hyperbranched poly(arylene‐oxindole) interiors

Core‐shell type star polymers composed of poly(tert‐butyl acrylate) (poly(t‐BuA)) arms and 100% hyperbranched poly(arylene‐oxindole) interiors were synthesized via the “core‐first” method. Atom transfer radical polymerization of t‐BuA initiated by 2‐bromopropionyl terminal groups of the hyperbranched core was applied for the synthesis of the stars. The resultant star structures were characterized by gel permeation chromatography with triple detection. Polymers of molar masses M_n up to 1.68 × 10⁵ g/mol were obtained. The obtained star polymers compared with the linear counterparts of the same molar mass have a much more compact structure in solution. The intrinsic viscosities of the stars are also significantly lower than their linear counterparts. Light scattering experiments were performed to provide information about the size of these macromolecules in solution. Preliminary characterization of the thermal properties of these novel materials is also reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1120–1135, 2009     

Three‐arm star ring opening metathesis polymers via alkyne‐azide click reaction

The click chemistry strategy is successfully applied for the preparation of three‐arm star (A₃) ring opening metathesis polymers. A well‐defined monoazide end‐functionalized poly(N‐ethyl oxanorbornene) and a poly(N‐butyl oxanorbornene) obtained via ring opening metathesis polymerization using first generation Grubbs' catalyst are simply clicked with the trisalkyne core affording the synthesis of target star polymers. The obtained star polymers are characterized via nuclear magnetic resonance spectroscopy and gel permeation chromatography (GPC). The deconvolution analyses of GPC traces reveal that the click reaction efficiency for the star formation strongly depends on the chemical nature and the molecular weight of ROM polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2344–2351, 2009     

Polymethylene‐block‐polystyrene copolymers: A new synthetic approach using a combination of polyhomologation and reversible addition‐fragmentation chain‐transfer polymerization and their microfibers and microspheres fabricated through electrospinning process

Well‐defined polymethylene‐block‐polystyrene (PM‐b‐PS) diblock copolymers were synthesized via a combination of polyhomologation of ylides and reversible addition‐fragmentation chain‐transfer (RAFT) polymerization of styrene. Trithiocarbonate‐terminated polymethylenes (PM‐TTCB) (M_n = 1400 g mol^?1; M_w/M_n = 1.09 and M_n = 2100 g mol^?1; M_w/M_n = 1.20) were obtained via an esterification of S?1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐acetate) trithiocarbonate with hydroxyl‐terminated polymethylene synthesized via polyhomologation of ylides followed by oxidation. Then, a series of PM‐b‐PS (M_n = 5500–34,000 g mol^?1; M_w/M_n = 1.12–1.25) diblock copolymers were obtained by RAFT polymerization of styrene using PM‐TTCB as a macromolecular chain‐transfer agent. The chain structures of all the polymers were characterized by proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography, and Fourier transform infrared spectroscopy. The thiocarbonylthio end‐group of PM‐b‐PS was transformed into thiol group by aminolysis and confirmed by UV–vis spectroscopy. In addition, microfibers and microspheres of such diblock copolymers were fabricated by electrospinning process and observed by scanning electron microscopy (SEM). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2892–2899     

End‐functionalization of semiconducting species with dendronized terpyridine–Ru(II)–terpyridine complexes

Semiconducting oligomers and polymers decorated with two or one dendronized tpy‐Ru(II)‐tpy metallocomplexes are presented. Initially, free terpyridine end‐functionalized semiconducting oligomers (distyrylanthracene, quinquephenylene, mono‐ and trifluorenes) were prepared while in a second approach, atom transfer radical polymerization was employed for the preparation of side‐chain oligomeric and polymeric (oxadiazole)s using a terpyridine initiator. These terpyridine‐bearing oligomers and polymers were complexated with a Percec‐type first‐generation (G1) dendronized terpyridine–Ru(III)Cl₃ monocomplex, having two dodecyloxy groups. All oligomeric and polymeric metallocomplexes were characterized via NMR spectroscopies for their structural perfection and via UV‐Vis and PL spectroscopies for their optical properties. The existence of the organic semiconducting blocks in combination with the terpyridine–Ru(II)–terpyridine groups afforded hybrid metallo‐semiconducting species presenting the optical features of both their components. Moreover, their thin‐film morphologies were investigated through atomic force microscopy, revealing, in some cases, an organization tendency in the nanometer scale. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1939–1952, 2009     

RAFT polymerization of a novel activated ester monomer and conversion to a terpyridine‐containing homopolymer

Developing new materials with unique properties for nanotechnology applications, in general, and supramolecular polymers, in particular, lie at the heart of much ongoing research. In line with these efforts, we have been exploring polymers containing terpyridine (terpy) in the side chain. Here we report a new monomer that effectively undergoes reversible addition fragmentation chain transfer polymerization (RAFT) to yield high‐molecular‐weight (M_n) polymers with narrow polydispersity (PDI). The monomer is an N‐succinimide activated ester of p‐vinyl benzoic acid. Under RAFT conditions, poly(N‐succinimide p‐vinylbenzoate)s were generated, with M_n ranging between 44 and 61 kDa and PDI of 1.03–1.07. One of these homopolymers was reacted with an amine functionalized terpy, creating a new homopolymer containing terpy ligands on every monomer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5618–5625, 2007     

Preparation of ABC miktoarm star terpolymer containing poly(ethylene glycol), polystyrene,and poly(tert‐butylacrylate) arms by combining diels–alder reaction,atom transfer radical,and stable free radical polymerization routes

The ABC type miktoarm star terpolymer was prepared utilizing “core‐in” and “core‐out” methods via combination of Diels–Alder reaction (DA), stable free radical polymerization (SFRP), and atom transfer radical polymerization (ATRP). First, in DA reaction, poly(ethylene glycol)‐maleimide (PEG‐maleimide) precursor was reacted with succinic acid anthracen‐9‐ylmethyl ester 3‐(2‐bromo‐2‐methyl‐propionyloxy)‐2‐methyl‐2‐[2‐phenyl‐2‐(2,2,6,6‐tetramethyl‐piperidin‐1‐yloxy)‐ethoxy‐carbonyl]‐propyl ester, 8 , to give DA adduct, 9 , which has appropriate functional groups for SFRP and ATRP. Second, a previously obtained 9 was used as a macroinitiator for SFRP of styrene at 125 °C. As a third step, this PEG‐polystyrene (PEG‐PSt) precursor with a bromine functionality in the core was employed as a macroinitiator for ATRP of tert‐butylacrylate (tBA) in the presence of Cu(I)Br and pentamethyldiethylenetriamine at 80 °C to give ABC type miktoarm star terpolymer (PEG‐PSt‐PtBA) with controlled molecular weight and low polydispersity (M_w/M_n < 1.27). The obtained polymers were characterized by gel permeation chromatography and ¹H NMR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 499–509, 2006     

Synthesis of dual pH/temperature‐responsive polymers with amino groups by living cationic polymerization

For the precision synthesis of primary amino functional polymers, cationic polymerization of a phthalimide‐containing vinyl ether monomer precursor, 2‐vinyloxyethyl phthalimide (PIVE), was examined using a base‐assisting initiating system. Living polymerization of PIVE in CH₂Cl₂ in the presence of 1,4‐dioxane as an added base yielded nearly monodispersed polymers (M_w/M_n < 1.1) and higher molecular weight polymers, which have never been obtained using other initiating systems. Furthermore, block copolymers with hydrophobic or hydrophilic groups could be prepared. The deprotection of the pendant phthalimide groups gave well‐defined pH‐responsive polymers with pendant primary amino groups. Dual‐stimuli–responsive block copolymers having a pH‐responsive polyamine segment and a thermosensitive segment self‐assembled in water in response to both pH and temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1207–1213, 2010     

Antithetic function of alcohol in living cationic polymerization: From terminator/inhibitor to useful initiator

We employed alcohols as initiators for living cationic polymerization of vinyl ethers and p‐methoxystyrene, coupled with tolerant Lewis acid, borontrifluoride etherate (BF₃OEt₂), although they were known to be poisonous reagent to bring about chain‐breaking such as chain transfer/termination rather than such beneficial one for propagation and polymerization‐control. As well known, without assistance of additive, ill‐defined polymers with broad molecular weight distributions (MWDs) were produced. Even addition of conventional oxygen‐based bases, for example, ethyl acetate (AcOEt), 1,4‐dioxane (DO), tetrahydrofran (THF), and diethyl ether (Et₂O) was less efficient in this system to control molecular weights and MWDs (M_w/M_n > 2.0). In contrast, by addition of dimethyl sulfide (Me₂S), MWDs of the resultant polymers became much narrower (M_w/M_n < 1.23) and the number‐average molecular weight (M_n) increased in direct proportion to monomer conversion in agreement with the calculated values assuming that one alcohol molecule generates one polymer chain. Studying changed feed‐ratio of alcohol to monomer and structural analyses with NMR and MALDI‐TOF‐MS indicated that quantitative initiation from alcohol giving alkoxide counteranion. This system opens a new way to use a variety of alcohols as initiators, which would allow us to design variety of structures and functions of counteranion. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4194–4201, 2009     

Synthesis and characterization of well‐defined ABC‐type triblock copolymers via atom transfer radical polymerization and stable free‐radical polymerization

An asymmetric difunctional initiator 2‐phenyl‐2‐[(2,2,6,6 tetramethylpiperidino)oxy] ethyl 2‐bromo propanoate ( 1 ) was used for the synthesis of ABC‐type methyl methacrylate (MMA)‐tert‐butylacrylate (tBA)‐styrene (St) triblock copolymers via a combination of atom transfer radical polymerization (ATRP) and stable free‐radical polymerization (SFRP). The ATRP‐ATRP‐SFRP or SFRP‐ATRP‐ATRP route led to ABC‐type triblock copolymers with controlled molecular weight and moderate polydispersity (M_w/M_n < 1.35). The block copolymers were characterized by gel permeation chromatography and ¹H NMR. The retaining chain‐end functionality and the applying halide exchange afforded high blocking efficiency as well as maintained control over entire routes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2025–2032, 2002