Syntheses,characterization, and functionalization of poly(ester amide)s with pendant amine functional groups

Poly(ester amide)s (PEAs) comprising α‐amino acids, diols, and diacids are promising materials for biomedical applications such as tissue engineering and drug delivery because of their tunability and potential for either hydrolytic or enzymatic degradation. Although a number of PEAs of different compositions have been reported, there is a significant need for the incorporation of amino acids with functional side chains. This will allow for the conjugation of drugs or cell signaling molecules in tissue engineering scaffolds, thus expanding the potential applications of these materials. The objective of this work was the incorporation of l ‐lysine into PEAs to provide functionalizable pendant amine groups. Thus, varying percentages of lysine were incorporated into PEAs comprised of l ‐phenylalanine, 1,4‐butanediol, and succinic acid by tuning the ratio of ε‐protected‐l ‐lysine and l ‐phenylalanine derived monomers. The polymers were characterized by nuclear magnetic resonance spectroscopy, infrared spectroscopy, size exclusion chromatography, and differential scanning calorimetry. The lysine ε‐protecting group was removed, then the reactivity of the pendant amines was demonstrated by reaction with amino acid and tri(ethylene glycol) derivatives. The degradation of thin films of polymers were studied using scanning electron microscopy and the incorporation of lysine was found to significantly accelerate both the hydrolytic and enzymatic degradation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6376–6392, 2008     

New poly(ester amide)s from alkyl 2‐(carboethoxyhydroxymethyl)acrylates

The synthesis of alkyl 2‐(carboethoxyhydroxymethyl)acrylates via the Bayllis‐Hillmann reaction pathway is described. These compounds are found to be poor monomers when involved in free radical polymerizations but present an extremely high reactivity upon Michael addition with primary amines leading to a simple, mild and efficient route to the preparation of new multifunctional heterocycles and polymers with potential applications in biodegradable coatings. Real‐time NMR spectroscopy permitted monitoring the extent of the reaction sequence and determining the conversion profile of reactants and Michael adduct intermediate. Poly(ester amide)s derived from diamine and hexane bis‐2‐(carboethoxyhydroxymethyl)acrylate were synthesized at room temperature by means of a very efficient Michael addition/cyclization polymerization. These polymers display excellent adhesion to metal, glass, and paper substrates and interesting hydrolytic susceptibility. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3182–3192, 2008     

Synthesis and properties of aromatic poly(ester amide)s with pendant phosphorus groups

Two series of phosphorus‐containing aromatic poly(ester amide)s with inherent viscosities of 0.46–3.20 dL/g were prepared by low‐temperature solution polycondensation from 1,4‐bis(3‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene and 1,4‐bis(4‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene with various aromatic diacid chlorides. All the poly(ester amide)s were amorphous and readily soluble in many organic solvents, such as N,N‐dimethylformamide, N,N‐dimethylacetamide (DMAc), and N‐methyl‐2‐pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc and NMP solutions. Their casting films had tensile strengths of 71–214 MPa, elongations to break of 5–10%, and initial moduli of 2.3–6.0 GPa. These poly(ester amide)s had glass‐transition temperatures of 209–239 °C (m‐series) and 222–267 °C (p‐series). The degradation temperatures at 10% weight loss in nitrogen for these polymers ranged from 462 to 489 °C, and the char yields at 800 °C were 55–63%. Most of the poly(ester amide)s also showed a high char yield of 35–45%, even at 800 °C under a flow of air. The limited oxygen indices of these poly(ester amide)s were 35–46. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 459–470, 2002; DOI 10.1002/pola.10129     

Synthesis,characterization, and biodegradation of copolymers of unsaturated and saturated poly(ester amide)s

A new family of biodegradable copolymers of unsaturated poly(ester amide)s (UPEAs) and saturated poly(ester amide)s (SPEAs) based on L ‐phenylalanine, aliphatic dicarboxylic acids, and aliphatic dialcohols was synthesized by solution polycondensation and characterized. These unsaturated/saturated poly(ester amide) copolymers (USPEAs) were obtained in fairly good yields with N,N‐dimethylacetamide as the solvent. The molecular weights (M_n and M_w) of the USPEAs measured by GPC ranged from 15 to 60 kg/mol with a molecular weight distribution of 1.07–1.63. The chemical structures of the USPEAs were confirmed by both IR and NMR spectra. The USPEA copolymers had glass transition temperatures lower than that of pure UPEA but higher than that of pure SPEA. An increase in the unsaturated component in the USPEA copolymers led to an increase in their glass transition temperatures. The solubility of the copolymers was good in N,N‐dimethylacetamide and dimethyl sulfoxide but poor in water, acetone, methanol, and ethyl acetate. The preliminary in vitro biodegradation properties of the USPEA copolymers were investigated in both pure phosphate buffered saline (PBS) buffer and α‐chymotrypsin solutions. The copolymers showed significantly faster weight loss in an enzyme solution than in a pure PBS buffer. Upon the adjustment of the unsaturated‐to‐saturated diester monomer feed ratio, the obtained USPEA copolymers could have controlled chemical and physical properties, such as glass transition temperatures, solubility, and biodegradability, which could easily extend their applications to biomedical and pharmaceutical areas. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1595–1606, 2007     

Synthesis and characterization of novel biodegradable unsaturated poly(ester amide)s

A series of novel biodegradable unsaturated poly(ester amide)s (UPEAs) were synthesized through the solution polycondensation of two unsaturated monomers, di‐p‐nitrophenyl fumarate and L ‐phenylalanine 2‐butene‐1,4‐diol diester p‐toluene sulfonate, and four other saturated monomers in different combinations. The UPEAs were obtained in fairly good yields with N,N‐dimethylacetamide (DMA) as the solvent. The number‐average and weight‐average molecular weights of the UPEAs, measured by gel permeation chromatography, ranged from 10 to 30 kg/mol, they had a rather narrow molecular weight distribution of 1.40. The chemical structures of the novel biodegradable UPEAs were confirmed by both IR and NMR spectra. The UPEAs had higher glass‐transition temperatures than saturated PEAs of similar structures, and their glass‐transition temperatures were affected more by the CC double bond located in the diamide part than by those in the diester part. The solubility of the polymers was poor in water but better in DMA and dimethyl sulfoxide. With the availability of these inherent CC double bonds in the UPEA backbones, these UPEAs have the functionality of CC bonds, such as photochemical reactivity or the ability to react with or be modified by other bioactive or other environmentally sensitive compounds, and this can easily extend their applications to biomedical and pharmaceutical areas. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1463–1477, 2005     

New amino acid based biodegradable poly(ester amide)s via bis-azlactone chemistry

Abstract

Three new classes of the amino acid based biodegradable (AABB) polymers were synthesized via step growth polymerization of bis-azlactones and amino acid based diamine-diesters with activated fatty diester and alkylenediamine: a) poly(ester amide)s (PEAs) were obtained by polymerization of bis-azlactones with diamine-diesters, b) hydrophobically modified co-poly(ester amide)s (co-PEAs) were synthesized by copolymerization of activated fatty diacid diester and bis-azlactones with diamine-diesters, and c) poly(ester amide-co-amide)s (PEA-co-PAs) were obtained by copolymerization of alkylene diamine and diamine-diesters with bis-azlactones. The new poly(ester amide)s showed relatively low-molecular-weights (M_w within 2,800–19,600?Da, GPC in DMF), whereas the new co-poly(ester amide)s and poly(ester amide-co-amide)s exhibited high-molecular-weights (M_w within 40–100?kDa) leading to good mechanical properties. Incorporation of the bis-azlactone fragments into the poly(ester amide)s backbone increased hydrophobicity and thermal stability, whereas incorporation of diamine-diester units into the backbone of the bis-azlactone based polyamides rendered them biodegradable. Synthesized AABB polymers are potential candidates for constructing resorbable surgical and pharmaceutical devices.     

Synthesis of electroactive and biodegradable multiblock copolymers based on poly(ester amide) and aniline pentamer

A new family of multiblock copolymers (PEA‐b‐AP) based on poly(ester amide) (PEA) and aniline pentamer (AP) with the unique properties of being both electroactive and biodegradable was synthesized via a two‐stage active solution polycondensation. The new synthesis approach proceeded smoothly, and avoided the complicated purification steps for separating the intermediate products. The molecular weight of PEA blocks was regulated by varying the nucleophilic/electrophilic monomers feed ratios. The chemical structures of the copolymers were confirmed by both IR and NMR spectra. UV‐Vis spectroscopy indicated that the copolymers possessed of the intrinsic electroactivity of AP blocks, and showed three reversible oxidation states. The copolymers had lower degradation rates than the PEA homopolymers with similar molecular weight, and their degradation rates were greatly affected by the proportion of AP blocks. In vitro cell culture studies of the PEA‐b‐APs revealed that they facilitated the proliferation of RSC96 Schwann cells and displayed a good biocompatibility. These biodegradable copolymers with electroactive function may have great potential for use as nerve repair and regeneration scaffold materials in tissue engineering. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4722–4731     

Synthesis and characterization of novel biodegradable unsaturated poly(ester amide)/poly(ethylene glycol) diacrylate hydrogels

A series of novel biodegradable hydrogels were designed and synthesized from four types of unsaturated poly(ester amide) (UPEA) and poly(ethylene glycol) diacrylate (PEG‐DA) precursors by UV photocrosslinking. These newly synthesized biodegradable UPEA/PEG‐DA hydrogels were characterized by their gel fraction (G_f), equilibrium swelling ratio (Q_eq), compressive modulus, and interior morphology. The effect of the precursor feed ratio (UPEAs to PEG‐DA) on the properties of the hydrogels was also studied. The incorporation of UPEA polymers into the PEG‐DA hydrogels increased their hydrophobicity, crosslinking density (denser network), and mechanical strength (higher compressive modulus) but reduced Q_eq. When different types of UPEA precursors were coupled with PEG‐DA at the same feed ratio (20 wt %), the resulting hydrogels had similar Q_eq values and porous three‐dimensional interior morphologies but different G_f and compressive modulus values. These differences in the hydrogel properties were correlated to the chemical structures of the UPEA precursors; that is, the different locations of the >C?C< double bonds in individual UPEA segments resulted in their different reactivities toward PEG‐DA to form hydrogels. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3932–3944, 2005     

New poly(arylene ether)s with pendant phosphonic acid groups

Soluble brominated poly(arylene ether)s containing mono‐ or dibromotetraphenylphenylene ether and octafluorobiphenylene units were synthesized. The polymers were high molecular weight (weight‐average molecular weight = 115,100–191,300; number‐average molecular weight = 32,300–34,000) and had high glass‐transition temperatures (>279 °C) and decomposition temperatures (>472 °C). The brominated polymers were phosphonated with diethylphosphite by a palladium‐catalyzed reaction. Quantitative phosphonation was possible when 50 mol % of a catalyst based on bromine was used. The diethylphosphonated polymers were dealkylated by a reaction with bromotrimethylsilane in carbon tetrachloride followed by hydrolysis with hydrochloric acid. The polymers with pendant phosphonic acid groups were soluble in polar solvents such as dimethyl sulfoxide and gave flexible and tough films via casting from solution. The polymers were hygroscopic and swelled in water. They did not decompose at temperatures of up to 260 °C under a nitrogen atmosphere. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3770–3779, 2001     

Synthesis and characterization of poly(phenylacetylenes) featuring activated ester side groups

Four monomers based on 4‐ethynylbenzoic acid have been synthesized, one of those featuring an activated ester. With the metathesis catalytic system WCl₆/Ph₄Sn, these acetylenic monomers could successfully be polymerized yielding conjugated polymers with molecular weights of around 10,000 to 15,000 g/mol and molecular weight distributions M_w/M_n ≤ 2.1. Also the copolymerization of phenylacetylene or methyl 4‐ethynylbenzoate with pentafluorophenyl 4‐ethynylbenzoate as reactive unit was conducted. Polymer analogous reactions of the reactive polymers and copolymers with amines have been investigated and it was found that poly(pentafluorophenyl 4‐ethynylbenzoate) featured a significant reactivity, such that reactions proceeded quantitatively even with aromatic amines. Moreover the UV‐Vis spectra of the activated ester based polymer before and after conversion with aliphatic amines showed a change, indicating an effect on the conjugated backbone of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of poly(ester amide)s with lateral groups from a bulk polycondensation reaction with formation of sodium chloride salts

Poly(ester amide)s with a regular sequence and derived from diamine, dicarboxylic acid, and glycolic acid units can be easily synthesized by using a thermal polycondensation method based on the formation of metal halide salts as a driving force. These new poly(ester amide)s have tuneable properties depending on the number of methylene groups and constitute a group of materials with potential interest as biodegradable materials in applications such as surgical sutures. The present work reveals that the proposed synthesis can also be applied when esters of L ‐lysine are used as a diamine unit since no secondary reactions such as transesterification occur under the required polymerization conditions. The possibility of linking compounds with pharmacological activity to the carboxylic acid groups of lysine extends the interest of the referred materials, for example, as drug delivery systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 661–667, 2008     

聚酯-酰胺的水解降解行为

研究了各种条件下聚酯-酰胺的水解降解行为及其与结构之间的关系。结果表明：酯键含量越高,质量损失就越快。聚合物的降解受酸、碱催化。根据SEM观察提出了可能发生的降解机理：表面腐蚀、非晶区腐蚀、晶区破坏到全部降解。     

Synthesis and characterization of functionalized water soluble cationic poly(ester amide)s

A new family of positively charged, water soluble and functional amino acid‐based poly(ester amide)s ( Arg‐AG PEA ) consisting of four building blocks (L ‐Arginine, DL ‐2‐Allylglycine, oligoethylene glycol, and aliphatic diacid) were synthesized by the solution copolycondensation. Functional pendant carbon–carbon double bonds located in the DL ‐2‐allylglycine unit were incorporated into these Arg‐AG PEAs, and the double bond contents could be adjusted by tuning the feed ratio of L ‐arginine to DL ‐2‐allylglycine monomers. Chemical structures of this new functional Arg‐AG PEA family were confirmed by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) spectra. The thermal property of these polymers was investigated; increasing the methylene chain in both the amino acid and diacid segments resulted in a reduction in the polymer glass‐transition temperature. All these cationic Arg‐AG PEAs had good solubility in water and polar organic solvents. The cytotoxity of Arg‐AG PEAs was evaluated by 3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay. These preliminary MTT results indicated that Arg‐AG PEAs were nontoxic to bovine aortic endothelial cells (BAECs). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3758–3766, 2010     

Synthesis and hydrolytic degradation of stereoregular aromatic poly(ester amide)s derived from D‐xylose

Stereoregular poly(ester amide)s (PEAs) were prepared by the polycondensation method using naturally occurring D ‐xylose and aromatic diacids as the starting materials. The polymers were characterized by elemental analysis, GPC, IR, and ¹H‐ and ¹³C NMR spectroscopies. Thermal and X‐ray diffraction studies revealed them to be mainly amorphous. The polymers are hydrophilic and their degradation studies were carried out at 37 and 80 °C in buffered salt solution at pH 8. The degradation study was monitored by mass loss, GPC, IR, and NMR spectroscopies. The hydrolytic degradation of these PEAs occurred rapidly by hydrolysis of the ester functions to a final compound, which maintained the amide functions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Crystallization and crystal structure of poly(ester amide)s derived from L‐tartaric acid

The crystal structure and crystallization behavior of a series of poly(ester amide)s derived from L ‐tartaric acid, 1,6‐hexanediamine, and 6‐amino‐1‐hexanol were examined. The study included aregic polymers containing 5, 10, and 20% of ester groups in addition to the syndioregic polymer containing equal amounts of amide and ester groups. X‐ray diffraction data revealed that all the aregic poly(ester amide)s adopt the same crystal structure as the parent polyamide made of L ‐tartaric acid, and 1,6‐hexanediamine. In this structure, chains are slightly compressed and arranged as in the α‐form of nylon 66. Solid‐state nuclear magnetic resonance (NMR) revealed that ester groups are excluded from the crystal phase except for the case of the syndioregic polymer. Isothermal crystallization kinetics was analyzed according to the Avrami theory. Crystallization rates were found to decrease regularly with increasing contents in ester groups and with increasing crystallization temperature. Avrami exponent values close to 2 were found whereas spherulitic morphologies were observed by optical microscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 116–125, 2007     

Novel aliphatic poly(ester‐carbonate) with pendant allyl ester groups and its folic acid functionalization

A series of novel poly(ester‐carbonate)s bearing pendant allyl ester groups P(LA‐co‐MAC)s were prepared by ring‐opening copolymerization of L ‐lactide (LA) and 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one (MAC) with diethyl zinc (ZnEt₂) as initiator. NMR analysis investigated the microstructure of the copolymer. DSC results indicated that the copolymers displayed a single glass‐transition temperature (T_g), which was indicative of a random copolymer, and the T_g decreased with increasing carbonate content in the copolymer. Then NHS‐activated folic acid (FA) first reacted with 2‐aminoethanethiol to yield FA‐SH; grafting FA‐SH to P(LA‐co‐MAC) in the presence of TEA produced P(LA‐co‐MAC)/FA. The structure of P(LA‐co‐MAC)/FA and its precursor were confirmed by ¹H NMR and XPS analysis. Cell experiments showed that FA‐grafted P(LA‐co‐MAC) had improved adhesion and proliferation behavior of vero cells on the polymer films. Therefore, the novel FA‐grafted block copolymer is expected to find application in drug delivery or tissue engineering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1852–1861, 2008     

Synthesis and characterization of a family of biodegradable poly(ester amide)s derived from glycine

A series of aliphatic poly(ester amide)s derived from 1,6-hexanediol, glycine, and diacids with a variable number of methylenes (from 2 to 8) have been synthesized and characterized. Infrared spectroscopy shows that the studied polymers present a unique kind of hydrogen bond that is established between their amide groups. Thermal properties as melting, glass transition, and decomposition temperatures are reported. The data indicate that all the polymers are highly crystalline. Thus, different kinds of spherulites (positive and/or negative) were obtained depending on the preparation conditions and on the polymer samples. Moreover, all the polymers crystallized from dilute diol solutions as ribbonlike crystals where a regular folding habit and a single hydrogen bond direction could be deduced. A test of enzymatic hydrolysis was employed to assess the potential biodegradability of these polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1271–1282, 1998     

New liquid‐crystalline poly(ester amide)s: The role of nitro groups in the phase behavior

New hydrogen‐bonded liquid‐crystalline poly(ester amide)s (PEA)s were obtained from 1,4‐terephthaloyl[bis‐(3‐nitro‐N‐anthranilic acid)] (5) or 1,4‐terephthaloyl[bis‐(N‐anthranilic acid)] (6), with or without nitro groups, respectively, through the separate condensation of each with hydroquinone or dihydroxynaphthalene. The dicarboxylic monomers were synthesized from 2‐aminobenzoic acid. The phase behavior of the monomers and polymers were studied with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction methods. Monomer 5, containing nitro groups, exhibited a smectic liquid‐crystalline phase, whereas the texture of monomer 6 without nitro groups appeared to be nematic. The PEAs containing nitro groups exhibited polymorphism (smectic and nematic), whereas those without nitro groups exhibited only one phase transition (a nematic threaded texture). The changes occurring in the phase behavior of the polymers were explained by the introduction of nitro groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1289–1298, 2004     

Sequential poly(ester amide)s based on glycine,diols, and dicarboxylic acids: Thermal polyesterification versus interfacial polyamidation. Characterization of polymers containing stiff units

Sequential poly(ester amide)s derived from glycine were synthesized by a two‐step method, involving a final thermal polyesterification. Molecular weights were in general higher than those obtained with the previously reported synthesis on the basis of interfacial polyamidation. Polymers with stiff units like oxaloyl or terephthaloyl residues were thermally characterized and their degradability studied by using different types of enzymes. Polymers containing short diols are degradable in papain solutions, the degradation rate being higher for oxalic derivatives. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4283–4293, 2001