聚丙烯—马来酸酐接枝共聚物的固态NMR谱研究

马来酸酐接枝聚丙烯的方法曾有过研究,但主要是熔融法和溶液法,反应温度在160℃以上,得到PP—g—MA共聚物。Russeli等曾对马来酸酐接枝二十烷烃作模型化合物进行过研究,~(13)C—NMR谱的结果表明在正二十烷烃主链上形成的主要为单马来酸环支链,未发现形成长链的马来酸酐均聚物,其原因为反应温度已超过马来酸酐聚合的最高温度(150℃)。     

稀土化合物参与的聚丙烯反应挤出接枝马来酸酐

将多种稀土化合物用于等规聚丙烯(iPP)与马来酸酐(MAH)的接枝反应, 对接枝共聚物的结构、 接枝率和加工行为等进行了表征和研究. 结果表明, 稀土氧化物CeO2和Nd2O3的加入促进了iPP熔体接枝MAH的反应, 与未加入稀土化合物的接枝体系相比, MAH单体接枝率最大值分别提高了14%和25%, 同时接枝共聚物的熔体流动速率(MFR)也分别增大了34%和56%. 根据实验条件下接枝共聚物的MFR与MAH单体接枝率间的关系, 并结合熔体接枝反应机理, 提出了采用MFR来表征接枝率的方法, 并建立了工作曲线. 同时, 对不同稀土化合物抑制或促进熔体接枝反应发生的机理进行了初步探讨.     

马来酸酐接枝聚丙烯的改性方法及其应用

马来酸酐(MAH)是聚丙烯改性中最常用的极性单体,在连续反应中酸酐基呈现很高的活性,反应产物热稳定性良好,可被应用于合金,塑料等材料的生产。随着各种技术的广泛应用,马来酸酐接枝聚丙烯改性方法得到了快速的发展。各种马来酸酐接枝聚丙烯的改性方法有:溶液接枝法、熔融接枝法、固相接枝法和辐射接枝法。文章阐述了马来酸酐接枝聚丙烯改性方法的研究现状及其产物在不同领域的应用。     

非水滴定和傅立叶红外光谱在聚丙烯马来酸酐接枝物表征中的应用

采用非水滴定法中的无机碱直接滴定方法测定了马来酸酐在聚丙烯上的接枝率,并对该方法作了可行性验证,讨论了非水滴定中的两个难点：化学计量比的确定和滴定终点的判断。通过傅立叶红外光谱法(FTIR)对聚丙烯马来酸酐接枝物的纯化效果、自由基引发反应对非水滴定的影响及聚丙烯接枝马来酸酐的反应机理作了定性分析,并结合非水滴定的数据绘制了红外定量校准曲线。     

碳纳米管的羟甲基化及其马来酸酐接枝研究

利用甲醛的亲电性能, 对化学气相沉积法(CVD)制备的多壁碳纳米管(MWCNTs)进行羟甲基化, 并在此基础上酯化接枝马来酸酐, 运用透射电子显微镜(TEM)、红外光谱和Zeta电位仪表征了改性后的MWCNTs的表面结构. TEM结果显示, 酯化后的MWCNTs明显增粗, 说明表面已附有物质. 红外结果表明, 羟甲基后的MWCNTs的表面有了羟基和亚甲基, 而马来酸酐酯化接枝后的MWCNTs有亚甲基和酯基官能团. 光学图像分析表明, 经甲醛处理后的MWCNTs在水溶液中的分散性明显提高, 而马来酸酐酯化接枝后的MWCNTs在二甲苯中的分散性明显增强. Zeta电位的测试结果表明, 甲醛处理过的MWCNTs颗粒在水中, 负电荷增多, 增强了其在悬浮液在溶液中的稳定性.     

马来酸酐溶液法接枝无规聚丙烯的研究

采用溶液法选用极性单体马来酸酐,在非隔氧条件下,对无规聚丙烯进行接枝改性。考察了不同温度、引发剂浓度、反应时间等因素对产物接枝率的影响,并用正交法指出影响因素的显著性,确定了控制ＭＡＰＰ接枝率的主要参数,找出了合成马来酸酐接枝无规聚丙烯（ＭＡＰＰ）的方法、体系与条件。采用红外及化学滴定等方法对聚合物的接枝率和结构进行了表征,证实了实验结果及相关理论的解释。     

马来酸酐接枝聚丙烯的等温结晶动力学研究

用ＤＳＣ法追踪了马来酸酐接枝聚丙烯的等温结晶过程，讨论了马来酸酐降低聚丙烯球晶径向生长自由能，提高结晶速率，但降低聚丙烯结晶度的物理和化学机制．同时探讨了马来酸酐的接枝对球晶生长和成核机制的影响．     

超临界CO2协助多单体接枝改性聚丙烯

利用超临界CO2作为溶胀剂和携带剂,使小分子单体马来酸酐和苯乙烯单体(MAH与St)及引发剂过氧化苯甲酰(BPO)插嵌进入聚丙烯(PP)基质中,然后在100℃条件下反应4 h得到接枝产物。研究了不同超临界CO2条件及引发剂浓度对接枝率的影响,固定超临界流体压力,改变温度,42℃为最佳温度,接枝率达到2.2%;固定温度,改变压力,10 MPa为最佳条件,接枝率为2.3%。对样品的FT-IR和SEM分析表明,共单体确实接枝到了PP分子链上,而DSC分析表明,随着接枝率的提高,材料的熔点(Tm)及表观结晶度(Ca)下降。这可能是接枝破坏了PP链结构的规整性,同时扩大了分子链间的距离所致。     

乙丙共聚物接枝马来酸酐反应机理的模拟研究

接枝反应;角鲨烷;乙丙共聚物接枝马来酸酐反应机理的模拟研究     

通过RAFT聚合制备SiO2/接枝共聚物纳米杂化粒子

以二氧化硅(SiO2)纳米粒子表面键接的二硫代苯甲酸酯作为可逆加成-断裂-链转移(RAFT)聚合反应的链转移剂, 在室温下引发苯乙烯和马来酸酐进行表面RAFT交替共聚反应, 制得了SiO2/苯乙烯-alt-马来酸酐杂化材料. 通过聚氧化乙烯(PEO)的羟基与马来酸酐的酯化反应, 将PEO接枝到SiO2纳米粒子的表面, 增加了硅粒子的生物相容性. 用FTIR, TGA和TEM对杂化材料的结构、组成和形貌进行了表征.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。