Synthesis and characterization of liquid crystalline polysiloxanes containing benzyl ether mesogens

Side chain liquid crystalline polysiloxanes were synthesized by the hydrosilation of poly(methylhydrosiloxane) with p-(1-undecenyl-11-oxy) benzyl ethers of 4-cyanophenol (IM), 4-methoxyphenol (IIM), 4-cyano-4′-hydroxybiphenyl (IIIM), 4-methoxy-4′-hydroxybiphenyl (IVM), and 2-cyano-6-hydroxynaphthalene (VM). The phase behavior of both monomeric and polymeric liquid crystals was characterized by differential scanning calorimetry and optical polarization microscopy. IM is a monotropic liquid crystal, IIM is crystalline, and IIIM and IVM are enantiotropic liquid crystals, whereas VM presents two virtual liquid crystalline transitions and crystalline polymorphism. All the synthesized polysiloxanes present enantiotropic smectic mesomorphism.     

含X-型二维液晶基元和顺式-4,4′-双(4-羟基苯基偶氮)二苯并-14-冠-4冠醚环液晶共聚酯的合成与表征

以4,4′-(α,ω-辛二酰氧)二苯甲酰氯(M1)、2,5-二(对十二烷氧基苯甲酰氧基)对苯二酚(M2)和顺式-4,4′-双(4-羟基苯基偶氮)二苯并-14-冠-4(M3)为单体,通过溶液共缩聚反应,合成了一系列含X-型二维液晶基元和顺式-4,4′-双(4-羟基苯基偶氮)二苯并-14-冠-4冠醚环的主链型液晶共聚酯.单体1(M1)由对羟基苯甲酸和辛二酰氯,通过酯化和取代反应制备,单体2(M2)由2,5-二羟基苯醌和对十二烷氧基苯甲酰氯通过酯化和还原反应制备,单体3(M3)由顺式-二氨基二苯并-14-冠-4和苯酚通过重氮化和偶联反应制备.共聚酯的分子量不高,[η]在0·35~0·25dL/g之间.单体的化学结构通过IR、UV、1H-NMR、MS和元素分析等方法确证.共聚酯的外观为黄色粉状固体,除CP9外,室温下不溶于CHCl3和THF溶剂.共聚酯的性质采用GPC、[η]、DSC、TG、WAXD和POM等方法进行了研究.发现所有的共聚酯加热到各自的熔融温度以上都能形成液晶态,在液晶态可以观察到向列相的丝状织构或纹影织构.共聚酯的熔融温度(Tm)和各向同性温度(Ti)随共聚酯分子中顺式-4,4′-双(4-羟基苯基偶氮)二苯并-14-冠-4用量的改变呈规律性变化.WAXD研究进一步证实了共聚酯的液晶性.     

SIDE CHAIN LIQUID CRYSTALLINE POLYSILOXANES CONTAINING CROWN ETHER AND BENZYL ETHER MOIETIES

Two kinds of side chain liquid crystalline polysiloxanes containing crownether and benzyl ether were synthesized and characterized by optical polarization mi-croscopy. Both the monomeric liquid crystals and polymeric liquid crystals show smecticphases.     

含X-型二维液晶基元和顺式-4,4′-双(4-羟基苯基偶氮)二苯并-18-冠-6冠醚环液晶共聚酯的合成与表征

以4,4-′(α,ω-辛二酰氧)二苯甲酰氯(M1)、2,5-双[4-′(对癸氧基苯基)苯甲酰氧基]对苯二酚(M2)和顺式-4,4′-双(4-羟基苯基偶氮)二苯并-18-冠-6(M3)为单体,通过溶液共缩聚反应,合成了一系列新的含X-型二维液晶基元和顺式-4,4′-双(4-羟基苯基偶氮)二苯并-18-冠-6冠醚环的主链型液晶共聚酯.单体1(M1)由对羟基苯甲酸和辛二酰氯,通过酯化和取代反应制备,单体2(M2)由2,5-二羟基苯醌和对癸氧基苯基苯甲酰氯通过酯化和还原反应制备,单体3(M3)由顺式-二氨基二苯并-18-冠-6和苯酚通过重氮化和偶联反应制备.共聚酯的分子量不高,[η]在0.30~0.39之间.单体的化学结构通过IR、UV1、H-NMR、MS和元素分析等方法确证.共聚酯的外观为黄色粉状固体,除共聚酯CP9外,室温下不溶于CHCl3和THF溶剂.共聚酯的性质采用GPC、[η]、DSC、TG、WAXD和POM等方法进行了研究,发现所有的共聚酯加热到各自的熔融温度以上都能形成液晶态,在液晶态可以观察到近晶相和向列相的典型织构.共聚酯的熔融温度(Tm)和各向同性温度(Ti)随共聚酯分子中顺式-4,4′-双(4-羟基苯基偶氮)二苯并-18-冠-6用量的改变呈规律性变化.WAXD研究进一步证实了共聚酯的液晶性.     

含X-型二维液晶基元和反式-4,4′-双(4-羟基苯基偶氮)二苯并-18-冠-6冠醚环的液晶共聚酯的合成与表征

以4,4-′(α,ω己二酰氧)二苯甲酰氯(M1)、2,5-二(对辛氧基苯甲酰氧基)氢醌(M2)和反式4,4′-双(4羟基苯基偶氮)二苯并18冠6(M3)为单体,通过溶液共缩聚反应,合成了一系列含X型二维液晶基元和反式4,4′双(4羟基苯基偶氮)二苯并18冠6冠醚环的主链型液晶共聚酯.共聚酯的分子量不高,[η]在0.37～0.25dL g之间.单体的化学结构通过IR、UV、H NMR、MS和元素分析等方法确证.共聚酯的外观为黄色粉状固体,除CP9外,室温下不溶于CHCl3和THF溶剂.共聚酯的性质采用GPC、[η]、DSC、TG、WAXD和POM等方法进行了研究.发现所有的共聚酯加热到各自的熔融温度以上都能形成液晶态,在液晶态可以观察到近晶相的镶嵌织构或焦锥织构或破扇型织构和向列相的球粒织构或丝状织构或纹影织构.共聚酯的熔融温度(Tm)和各向同性温度(Ti)随共聚酯分子中反式4,4′双(4-羟基苯基偶氮)二苯并18冠6用量的改变呈规律性变化.WAXD研究进一步证实了共聚酯的液晶性.     

Triphenylene-based discotic liquid crystal dimers, oligomers and polymers

Discotic liquid crystals are unique nanostructures with remarkable electronic and optoelectronic properties. Triphenylene derivatives play a major role in the research on discotic liquid crystals. Following recent reviews of the chemistry of triphenylene-based monomeric liquid crystals, this article now reviews the chemistry and physical properties of triphenylene-based discotic dimeric, oligomeric and polymeric liquid crystals.     

2-甲基-7-亚甲基-1,4,6-三氧螺[4,4]壬烷与丙烯腈、丙烯酸甲酯的共聚合反应及竞聚率的测定

用高效液相色谱跟踪2-甲基-7-亚甲基-1,4,6-三氧螺[4,4]壬烷(MMTN)与丙烯腈(AN),丙烯酸甲酯(MA)的共聚合反应。根据Lowry-Meyer共聚积分方程式,采用插值法进行数据拟合测定单体的竞聚率。对于体系MMTN(M_1)-AN(M_2),r_1=0.048;r_2=0.213;MMTN(M_1)-MA(M_2)r_1=0.025,r_2=0.764。说明两组共聚体系均有较强的交替共聚趋势。     

Synthesis and characterization of side-chain liquid crystalline polysiloxanes containing oligooxyethylene spacers and benzyl ether based mesogenic groups

The synthesis of side-chain liquid crystalline polysiloxanes containing oligooxyethylene spacers and 4-methoxyphenyl benzyl ether and 6-cyano-2-naphthyl benzyl ether based mesogenic groups is presented. The phase behavior of both monomeric and polymeric liquid crystals was characterized by differential scanning calorimetry and optical polarized microscopy. All synthesized polysiloxanes present smectic mesomorphism. The insertion of oxygen atoms into the flexible aliphatic spacers leads to decrease in both glass transition and isotropization temperatures of the resulting side-chain liquid crystalline polymers.     

Thermophysical behaviour of monofunctional acrylate and liquid crystal systems

The phase behavior of monofunctional acrylate and low molecular weight nematic liquid crystals (LC) is considered. Systems involving the monomeric 2-ethylhexylacrylate (2-EHA), the eutectic LC mixture known as E7 and the 4-cyano-4^′-n-pentyl-biphenyl (5CB) are investigated. A similar investigation is performed on mixtures involving a polymer poly-2-EHA with molecular weight M_w=48,000 g/mol and both LCs. The experimental phase diagrams are established using polarized optical microscopy and analyzed using a theoretical formalism which combines the Flory-Huggins theory of isotropic mixing and the Maier-Saupe theory of nematic order. The results lead to characterization of the miscibility of E7 and 5CB with monomeric and analogous polymeric 2-EHA systems.     

Controlling Liquid Crystal Configuration and Phase Using Multiple Molecular Triggers

Liquid crystals are able to transform a local molecular interaction into a macroscopic change of state, making them a valuable “smart” material. Here, we investigate a novel polymeric amphiphile as a candidate for molecular triggering of liquid crystal droplets in aqueous background. Using microscopy equipped with crossed polarizers and optical tweezers, we find that the monomeric amphiphile is able to trigger both a fast phase change and then a subsequent transition from nematic to isotropic. We next include sodium dodecyl sulfate (SDS), a standard surfactant, with the novel amphiphilic molecules to test phase transitioning when both were present. As seen previously, we find that the activity of SDS at the surface can result in configuration changes with hysteresis. We find that the presence of the polymeric amphiphile reverses the hysteresis previously observed during such transitions. This work demonstrates a variety of phase and configuration changes of liquid crystals that can be controlled by multiple exogenous chemical triggers.     

向列相液晶4-氰基-4'-庚基联苯和4-氰基-4'-戊基联苯在准固态染料敏化太阳电池中的应用

将两种向列相液晶,4-氰基-4'-庚基联苯和4-氰基-4'-戊基联苯,引入到染料敏化太阳电池(DSC)用偏氟乙烯-六氟乙烯共聚物基准固态电解质中,以期提高DSC的光电转化效率.研究了液晶的引入对电解质中I-/I3-的氧化还原行为、DSC中TiO2/电解质界面的暗反应以及DSC光伏性能的影响.结果表明,尽管液晶的引入会降低电解质中I-/I3-的传输并且使得DSC中暗反应加快,但是DSC的短路电流密度却显著地提高,使DSC的光电转化效率增加.这可能是由于液晶的引入改善了DSC中的界面接触以及增加染料的光吸收引起的.     

BiZn Bond Formation in Liquid Ammonia Solution: [BiZnBi]4−, a Linear Polyanion that is Iso(valence)‐electronic to CO2

Reactions of the zinc(I) complex [Zn₂(Mesnacnac)₂] (Mesnacnac=[(2,4,6‐Me₃C₆H₂)NC(Me)]₂CH) with solid K₃Bi₂ dissolved in liquid ammonia yield crystals of the compound K₄[ZnBi₂]?(NH₃)₁₂ ( 1 ), which contains the molecular, linear heteroatomic [Bi? Zn? Bi]^4? polyanion ( 1 a ). This anion represents the first example of a three‐atomic molecular ion of metal atoms being iso(valence)‐electronic to CO₂ and being synthesized in solution. The analogy of the discrete [Bi? Zn? Bi]^4? anion and the polymeric [(ZnBi_4/2)^4?] unit to monomeric CO₂ and polymeric SiS₂ is rationalized.     

Monomer and polymer quinoxaline derivatives for cationic recognition

Monomeric and polymeric 5-nitroquinoxaline derivatives disubstituted in the 2 and 3 positions with 2-pyrrolyl (A), 2-furyl (B) and 2-thienyl (C) groups were prepared and characterized. The substituted 5-nitroquinoxalines were used as active components in poly(vinyl chloride)-membrane and electropolymerized electrodes that were then tested as possible sensors for various cationic species. In contrast to the difurylnitroquinoxaline-based systems, the monomeric and polymeric dipyrrolyl- and dithienylquinoxaline electrodes displayed a good selectivity for Ag(+) ions, providing a near-Nernstian response in the 10(-5) to 10(-2) mol L(-1) concentration range. The similar potentiometric behavior displayed by the monomeric and polymeric forms of systems A and C supports the contention that the main binding modes displayed by the monomeric forms are retained in the corresponding polymeric structures.     

Synthesis and characterization of liquid-crystalline side group polymers with benzylideneaniline as mesogenic moiety

Two new thermotropic liquid-crystalline side group polymers were synthesized, characterized and compared with the liquid-crystalline monomeric analogues. Some packing features of these polymeric liquid crystals are discussed.

Investigations were carried out by differential calorimetry (D.S.C.), polarization microscopic observation and X-ray diffraction on non-aligned and magnetic field-aligned samples in the wide and small angle region.

The synthesized polymers contain as mesogenic moiety a benzylideneaniline group which is attached in the 4 position via a hexamethylene spacer to a poly-methacrylate backbone. The benzylideneaniline group is substituted in 4′ position with an ethoxy or butoxy group (PEt or PBu). The monomeric analogues are denoted MEt and MBu. The two polymers show a phase sequence crystalline-smectic A-nematic-isotropic. The liquid-crystalline temperature range is observed between 90 and 150°C. The monomeric MEt exhibits only a monotropic nematic, MBu an enantiotropic nematic and a smectic A phase.     

Metalloporphyrin-based inclusion materials: exploiting ligating topologies and hydrogen-bonding backbones in generating new supramolecular architectures

By coordination of the metal center of tetraphenylmetalloporphyrins (TPMP) [metal center=Zn(II) or Mn(II)] with pyridyl-based bidentate ligands, namely, N,N'-bis(4-pyridyl)urea (4BPU), N,N'-bis(3-pyridyl)urea (3BPU), and N-(4-pyridyl)isonicotinamide (4PIN), various axially modified tetraarylmetalloporphyrins (AMTAMPs) have been crystallographically characterized in their corresponding lattice inclusion complexes. Nine such inclusion crystals are prepared by crystallizing TPMP and the corresponding bidentate ligands in 1:2 molar ratio from suitable solvent systems. While the metal center Zn(II) of TPMP leads to the formation of both dimeric and monomeric AMTAMPs due to its preference for pentacoordinated geometry, the Mn(II) metal center of TPMP forms both polymeric and discrete hexacoordinated AMTAMPs due to its preference for hexacoordinated geometry. However, there seem to be no control on the formation of a particular AMTAMP. Structural analyses suggest that most of the AMTAMPs display new types of packing in the corresponding inclusion crystals.     

Lyotropic liquid crystalline phase behaviour of a monomeric and a polymeric monosaccharide amphiphile in aqueous solution

Monomeric and polymeric amphiphiles were synthesized which exhibit lyotropic liquid crystalline phases in aqueous solution. The hydrophobic group of the monomeric surfactant is a dodecane-group esterified with acrylic acid. The hydrophilic unit is a monosaccharide derivative. By radical polymerization the monomer (N-D(-)-gluco-N-methyl-(12-acryloyloxy)-dodecane-l-amide) is converted into the corresponding polymeric surfactant. The monomer as well as the polymer exhibit a lyotropic 1.c. phase of lamellar structure. Owing to the polymerization the regime of the lamellar phase is greatly enlarged for the polymer, compared to the monomeric sufactant. These results confirm earlier investigations on non-ionic ethylene-glycol surfactants.     

Optical spectra of monomeric and polymeric diacetylene crystals in the synchrotron radiation region of 1–20 eV

Polarized reflection spectra have been measured on monomeric and polymeric crystals of bis (p-toluene sulfonate) diacetylene in the synchrotron radiation region of 1–20 eV. Assignments are given for the spectral features observed in both crystals. The one-dimensional Wannier exciton model is proposed to interpret the polymer spectra.     

Bi?Zn Bond Formation in Liquid Ammonia Solution: [Bi?Zn?Bi]4−, a Linear Polyanion that is Iso(valence)‐electronic to CO2

Reactions of the zinc(I) complex [Zn₂(Mesnacnac)₂] (Mesnacnac=[(2,4,6‐Me₃C₆H₂)NC(Me)]₂CH) with solid K₃Bi₂ dissolved in liquid ammonia yield crystals of the compound K₄[ZnBi₂]⋅(NH₃)₁₂ ( 1 ), which contains the molecular, linear heteroatomic [Bi Zn Bi]⁴⁻ polyanion ( 1 a ). This anion represents the first example of a three‐atomic molecular ion of metal atoms being iso(valence)‐electronic to CO₂ and being synthesized in solution. The analogy of the discrete [Bi Zn Bi]⁴⁻ anion and the polymeric [(ZnBi_4/2)⁴⁻] unit to monomeric CO₂ and polymeric SiS₂ is rationalized.     

On the formation of liquid crystalline texture in epoxy resins

Three epoxy resins and two curing agents were studied in their monomeric as well as polymeric states. Two monomers were monotropic liquid crystals. Characterization of liquid crystallinity before, during and after curing reaction was carried out by DSC, optical microscopy and WAXS. It was found that LC texture develops in every epoxy/(curing agent) system studied in this work. Nucleation and growth is a physical mechanism for the formation of initial liquid crystallinity. The final texture is not well defined and likely contains nematic, poorly ordered smectic and isotropic phases. Schematic diagram of the possible states of LCTs is discussed.     

A comparison study between polymeric ligand and monomeric ligand for oligopeptide adsorption

This work aimed to compare two types of affinity ligands, i.e. polymeric and monomeric ligands, by investigating their adsorption affinity, capacity and selectivity to oligopeptide. The peptide NH(2)-VVRGCTWW-COOH (VW-8) was chosen as the target adsorbate, while histidine (His), aspartic acid (Asp), and leucine (Leu) were selected as the ligands, respectively. For each kind of ligand, both monomeric (M) and polymeric (P) forms were introduced onto the Sepharose matrix respectively to obtain the corresponding adsorbents. Both affinity tests using isothermal titration calorimetry (ITC) and adsorption capacities using static adsorption experiments indicated that the adsorbents with polymeric ligands (MX-P) exhibited better adsorption ability for VW-8 than the adsorbents with monomeric ligands (MX-M). In particular, the MX-PHis exhibited its affinity constant of 2.39 × 10(6) M(-1) and its adsorption capacity of 77.4 mg/g for VW-8, which was approximately 8-10 times higher than that of MX-MHis. Such distinct adsorption abilities between polymeric and monomeric ligands were interpreted based on nuclear magnetic resonance (NMR) and ITC data, and the results indicated that such better characters of polymeric ligands were ascribed to their good flexibility which facilitated the cooperative effects as well as the accessibility of ligands to the peptide. Additionally, the selective adsorption experiments indicated that all the adsorbents with polymeric ligands exhibited good selectivity to the peptide VW-8.