Density functional theory study on the structure and vibrational frequencies of glycylglycine

Eleven possible conformers of glycylglycine have been studied by using the BLYP, B3LYP methods of density functional theory and the HF method at the basis set of 6-311++G**. BLYP (using Becke's and Lee-Yang-Parr's correlation functionals), ab initio Hartree-Fock (HF) and hybrid DFT/HF B3LYP calculations have been carried out to study the structure and vibrational spectra of glycylglycine. Glycylglycine crystal structure has been determined by X-ray diffraction analysis. The title compound has been crystallizes in the orthorhombic space group C1, with Z=4. And the unit cell parameters are: a=8.1184(12)A, b=9.5542(14)A, c=7.8192(11)A and V=577.95(15)A(3). Molecular conformation calculations have got 11 possible conformers. In these possible conformers, the most stable one has been selected. The BLYP/6-311++G** and scaled HF/6-311++G** frequencies correspond well with available experimental assignments of the normal vibrational modes. Comparison of the observed fundamental vibrational frequencies of glycylglycine and calculated results by density functional B3LYP and Hartree-Fock (HF) methods indicates that B3LYP is superior to the scaled Hartree-Fock (HF) for molecular vibrational issues.     

Theory Study on Structures and Vibrational Frequencies of Pyruvic acid

Anumberoftheoreticalstudiesexistforpyruvicacid.IthasbeenstudiedatthesemiempiricalINDOandAMIlevell'2.AttheahinitiolevelstudiesofpyruvicacidrangefromthecalculationofenergiesattheSTO-3Glevel'tocalculationsofenergiesusingtheHF/3-2iG',HF/4-21G',HF/6-3iG*andMP2/4-21Gmethods.ExceptforthestudyofMurtoetal.,allthestudieshavefocussedontheenergiesandgeometriesofpyruvicacid.Moreoveralltheexistingtheoreticalstudieshavefocusedtheirattentionontheorientationofthecarboxylhydrogenextensively.Theorienta…     

Density functional theory study of vibrational spectra. 8. Assignment of fundamental vibrational modes of 9,10-anthraquinone and 9,10-anthraquinone-d8

Density functional theory (using Becke's exchange and Lee-Yang-Parr's correlation functionals (BLYP)) and ab initio Hartree-Fock calculations were carried out in order to investigate the molecular structure and vibrational spectra of 9,10-anthraquinone and its perdeuterated analog. The calculated structural and spectral features are in good agreement with the available experimental results. Most of the BLYP/6-31G* non-CH(D) stretching frequencies are slightly lower than reliable experimental assignments; the mean absolute deviation is about 14 cm⁻¹. On the basis of agreement between calculated and experimental results, assignments of the fundamental vibrational modes were examined and some reassignments were proposed. The calculated results can serve as a guide for a future experimental search for the missing fundamentals of the target molecules.     

Structure and vibrational frequencies of 2-butanimine

The conformational behavior and structural stability of 2-butanimine were investigated by utilizing ab initio calculations with 6-311++G** basis set at HF, MP2, B3LYP and BLYP levels. The vibrational frequencies of 2-butanimine were computed. Complete vibrational assignments were made on the basis of normal coordinate calculations for stable conformer of the molecule. HF results without scaled quantum mechanical (SQM) force field procedure considered are in bad agreement with experimental values. Of the two DFT methods, BLYP reproduces the observed fundamental frequencies most satisfactorily with the mean absolute deviation of the non-CH stretching modes less than 21.3 cm(-1). The results indicate that BLYP calculation is a very promising approach for understanding the observed spectral features.     

Theoretical Study on the Structure and Vibrational Spectra for4-methyl-3-penten-2-one

The4-methyl-3-penten-2-oneisanimportanta,0-unsaturedketonemoleculeandanimportantligandoftheorganometalliccompounds.Untilnow,somepropertiesofphoto-chemistryandexcitedstateshavebeenexperimentallystudied'-#andconformationofthemoleculewerealsostudiedinexperiments"'.Standardinfraredgratingspectrumwasalsoobtainedin1970'.However,therearenodensityfunctionaltheory(DFT)calculationsofthismoleculeintheliterature.Recently,densityfunctionaltheoryhasbeenacceptedbytheahinitioquantumchemistrycommunityasacost…     

Si~2Cl~6分子的内旋转能垒和振动基频的理论研究

用从头算方法HF/6-31G^*^*和密度函方法B3LYP/6-31G^*^*,对Si~2Cl~6分子的平衡几何构型进行优化,优化的结果与实验结果吻合得较好.并用上述两种不同的方法计算Si~2Cl~6分子的内旋转能垒,结果分别为8.786和6.694kJ/mol,其中DFT方法的计算结果与实验结果4.18kJ/mol吻合得较好.对Si~2Cl~6分子的振动基频进行计算.用HF/6-31G^*^*SQM力场所计算的频率理论值与实验值的平均误差为7.3cm^-^1,用B3LYP/6-31G^*^*未标度的力场所计算的频率理论值与实验值的平均误差为6.0cm^-^1.该密度泛函方法(B3LYP/~6-31G^*^*)的理论计算值比用HF/6-31G^*^*标度后的SQM力场计算的频率与实验值(除Si--Si键扭转振动基频之外的11条振动基频)吻合得更好.并给出了Si--Si键扭转振动基频的预测值。     

丙酮酸分子结构与振动光谱的密度泛函理论研究

用密度泛函方法BLYP、B3LYP和从头算Hartree-Fock(HF)方法在6-31G*基组水平上对丙酮酸分子的几何结构（甲基的重叠式和交错式两种构象）和振动光谱分别进行了优化和计算,并给出了各种频率所对应的红外强度及拉曼活性,对光谱进行了指认。结果表明：在丙酮酸分子的两种构象中,重叠式比较稳定*B3LYP计算得到的构型参数与实验结果比较一致;在振动频率的计算中,BLYP未标度力场所计算的非CH3伸缩振动基频预测值和实验值的平均绝对偏差为10.4cm-1;而HF标度力场的平均绝对偏差为17.9cm-1。说明两者的结果与实验观测频率比较吻合,但B3LYP的频率计算值偏差（38.3cm-1）较大。根据振动频率的势能分布和红外光谱强度对此分子的振动基频进行了理论归属。     

Analysis of vibrational spectra of chlorotoluene based on density function theory calculations

The conformational behavior and structural stability of chlorotoluene were investigated by utilizing ab initio calculations with 6-31G* basis set at restricted Hartree-Fock (RHF) and density function theory (DFT) levels. The vibrational frequencies of chlorotoluene were computed at the RHF and DFT levels. Complete vibrational assignments were made on the basis of normal coordinate calculations for stable conformer of the molecule. RHF results without scaled quantum mechanical (SQM) force field procedure considered are in bad agreement with experimental values. Of the five DFT methods, BLYP reproduces the observed fundamental frequencies most satisfactorily with the mean absolute deviation of the non-CH stretching modes less than 10 cm(-1). Two hybrid DFT methods are found to yield frequencies, which are generally higher than the observed fundamental frequencies. When the calculated results are compared with 'experimental' frequencies, B3LYP method is found to be slightly more accurate for C-H stretching modes. The results indicate that BLYP calculation is a very promising approach for understanding the observed spectral features.     

Theoretical study on infrared vibrational spectra of boric-acid in gas-phase using density functional methods

Density functional theory (DFT) methods with various exchange-correlation functionals such as SVWN, BVWN, BVWN5, BLYP, B1LYP, B3LYP, B3PW91, and BH and H are employed in a theoretical study of molecular boric-acid in gas-phase. In the calculations, the split valence 6-311++G** and 6-31G* basis sets were used. The geometry, zero-point vibrational energies (ZPVEs), and harmonic infrared vibrational (IR) frequencies are predicted. The calculated C_3h-symmetry geometrical parameters are compared with Hartree–Fock (HF) calculation results and experimental data. IR frequencies predicted by the BLYP, B3LYP, and B3PW91 calculations are in good agreement with experimental data. The frequency calculations presented here also suggest that the C_3h-symmetrical structure corresponds to a minimum in the potential energy surface, but neither is D_3h- or C₃-symmetrical structure.     

Density functional theory study on fundamental vibrational spectra of disilyl iodide and its isotopomer

Density function theory calculations using B3' exchange functional and LYP' correlation functionals (B3LYP) with the 3-21G** basis set were carried out to study the molecular structure and fundamental vibrational frequencies of Si2H5Br, Si2H5I and their isotopomers. One scale factor used to scale Si-H(D) force constants for Si2H5Br is transferred from Si2H5Br to Si2H5I. Other scale factors of force constants for Si2H5I and Si2D5I are determined by a least-squares fitting to experimental vibrational frequencies. The predictions of fundamental vibrational frequencies for Si2H5I and its isotopomer are given. The scaled DFT force fields using B3LYP/3-21G** reproduced the observed fundamental vibrational frequencies of Si2H5I and its deuterium isotopomer with a mean absolute deviation of 6 cm(-1). Reassignment of some fundamental vibrational modes of Si2H5I and its isotopomer is discussed.     

Systematic study of vibrational frequencies calculated with the self-consistent charge density functional tight-binding method

We present a detailed study of harmonic vibrational frequencies obtained with the self-consistent charge density functional tight-binding (SCC-DFTB) method. Our testing set comprises 66 molecules and 1304 distinct vibrational modes. Harmonic vibrational frequencies are computed using an efficient analytical algorithm developed and coded by the authors. The obtained results are compared to experiment and to other theoretical findings. Scaling factor for the SCC-DFTB method, determined by minimization of mean absolute deviation of scaled frequencies, is found to be 0.9933. The accuracy of the scaled SCC-DFTB frequencies is noticeably better than for other semiempirical methods (including standard DFTB method) and approximately twice worse than for other well established scaled ab initio quantum chemistry methods (e.g., HF, BLYP, B3LYP). Mean absolute deviation for the scaled SCC-DFTB frequencies is 56 cm(-1), while standard deviation is 82 cm(-1), and maximal absolute deviation is as large as 529 cm(-1). Using SCC-DFTB allows for substantial time savings; computational time is reduced from hours to seconds when compared to standard ab initio techniques.     

Anharmonic vibrational spectroscopy calculations with electronic structure potentials: comparison of MP2 and DFT for organic molecules

Density functional theory (DFT) technique is the most commonly used approach when it comes to computation of vibrational spectra of molecular species. In this study, we compare anharmonic spectra of several organic molecules such as allene, propyne, glycine, and imidazole, computed from ab initio MP2 potentials and DFT potentials based on commonly used BLYP and B3LYP functionals. Anharmonic spectra are obtained using the direct vibrational self-consistent field (VSCF) method and its correlation-corrected extension (CC-VSCF). The results of computations are compared with available experimental data. It is shown that the most accurate vibrational frequencies are obtained with the MP2 method, followed by the DFT/B3LYP method, while DFT/BLYP results are often unsatisfactory. Contribution to the Mark S. Gordon 65th Birthday Festschrift Issue.     

The molecular structure and vibrational spectra of 3-acetyl-4-[N-(2'-aminopyridinyl)-3-amino]-3-buten-2-one by Hartree-Fock and density functional theory calculations

The molecular structure and vibrational spectra of 3-acetyl-4-[N-(2'-aminopyridinyl)-3-amino]-3-buten-2-one (C(11)H(13)N(3)O(2)) in the ground state have been investigated by Hartree-Fock and density functional method (B3LYP and BLYP) with 6-31G(d) basis set. The optimized geometric bond lengths and bond angles obtained by using HF and DFT show the best agreement with the experimental data. Comparison of the observed fundamental vibrational frequencies of title compound and calculated results by HF and DFT methods indicate that B3LYP is superior to the scaled HF approach for molecular problems.     

The molecular structure and vibrational spectra of 2-chloro-N-(diethylcarbamothioyl)benzamide by Hartree-Fock and density functional methods

2-Chloro-N-(diethylcarbamothioyl)benzamide (C(12)H(15)ClN(2)OS) has been synthesized and characterized by elemental analysis and IR spectroscopy. The crystal and molecular structure of the title compound has been determined from single crystal X-ray diffraction data. It crystallizes in the orthorhombic space group Pbca, Z=8 with a=9.581(3)A, b=9.992(3)A, c=26.640(8)A, V=2550.5(13)A(3) and D(calc)=1.410 Mg/m(3). The molecular geometry and vibrational frequencies of 2-chloro-N-(diethylcarbamothioyl)benzamide in the ground state have been calculated using the Hartree-Fock and density functional using Becke's three-parameter hybrid method with the Lee, Yang and Parr correlation functional (B3LYP) methods with 3-21G and 6-31G(d) basis sets. The calculated geometric parameters were compared to the corresponding X-ray structure of the title compound. The raw B3LYP frequencies approximate the experimental data much better than the results of Hartree-Fock. The scaled B3LYP/6-31G(d) results were more reliable than those obtained using the B3LYP/3-21G method with the mean absolute deviation about 13.7 cm(-1). On the basis of the comparison between calculated and experimental results, assignments of fundamental vibrational modes were examined.     

Vibrational spectra and conformations of 1,4-cyclohexadiene and its oxygen analogues: ab initio and density functional calculations

The vibrational spectra and ring-puckering potential energy functions of 1,4-cyclohexadiene, 4H-pyran and 1,4-dioxin have been examined using a density functional theory (DFT) method as well as the Hartree–Fock (HF) and second-order Møller–Plesset (MP2) methods. The calculated vibrational frequencies and potential energy functions of those molecules have been compared with previously reported experimental data and MM3 results. For all three molecules, the DFT method using Becke's three-parameter functional (B3LYP) has led to the prediction of more accurate vibrational frequencies than the HF and MP2 methods. The enlargement of the basis set at the B3LYP levels has improved the accuracy of calculated vibrational frequencies. In particular, the C–O–C=C torsional force field parameters obtained from the B3LYP method have correctly predicted the ring-puckering potential energy functions of the oxygen-containing analogues, 4H-pyran and 1,4-dioxin, which could not be done by the MM3 method.     

HF and DFT studies of the structure and vibrational spectra of 8-hydroxyquinoline and its mercury(II) halide complexes

The geometry, frequency and intensity of the vibrational bands of 8-hydroxyquinoline (8-HOQ) were obtained by HF and density functional theory (DFT) with BLYP and B3LYP functionals and 6-31G(d) as the basis set. The optimized bond lengths and bond angles are in good agreement with the X-ray data. The vibrational spectra of 8-HOQ which is calculated by the HF and DFT methods, reproduces the vibrational wavenumbers and intensities with an accuracy, which allows reliable vibrational assignments. Complexes of the type Hg(8-HOQ)X(2) [where X = Cl , Br] have been studied in the 4000-200 cm(-1) region, and assignment of all the observed bands were made. The analysis of the infrared spectra indicates that there are some structure-spectra correlations.     

Tert-butyl N-(2-bromocyclohex-2-enyl)-N-(2-furylmethyl)carbamate的结构和振动光谱

The molecular structure, conformafional stability, and vibrational frequencies of ten-butyl N-（2- bromocyclohex-2-enyl）-N-（2-furylmethyl）carbamate （TBBFC） were investigated by utilizing the Hartree-Fock （HF） and density functional theory （DFT） ab initio calculations with 6-31G ^＊ and 6-31G^＊ ＊ basis sets. The optimized bond length and angle values obtained by HF method showed the best agreement with the experimental values. Comparison of the observed and calculated fundamental vibrational frequencies indicated that B3LYP was superior to the scaled HF approach for molecular problems. Optimal uniform scaling factors calculated for the title compound are 0.899/0.904, 0.958/0.961, and 0.988/0.989 for HF, B3LYP, and BLYP （6-31G ^＊/6-31G ^＊ ＊）, respectively.     

Vibrational assignment of aluminum(III) tris-acetylacetone

The geometry, frequency and intensity of the vibrational bands of aluminum(III) Tris-acetylacetone Al(AA)3 and its 1,3,5-(13)C derivative were obtained by the Hartree-Fock (HF) and Density Functional Theory (DFT) with the B3LYP, B1LYP, and G96LYP functionals and using the 6-31G* basis set. The calculated frequencies are compared with the solid IR and Raman spectra. All of the measured IR and Raman bands were interpreted in terms of the calculated vibrational modes. Most computed bands are predicted to be at higher wavenumbers than the experimental bands. The calculated bond lengths and bond angles are in good agreement with the experimental results. Analysis of the vibrational spectra indicates a strong coupling between the chelated ring modes. Four bands in the 500-390 cm(-1) frequency range are assigned to the vibrations of metal-ligand bonds.     

Molecular structure and vibrational analysis of 3-Ethylpyridine using ab initio HF and density functional theory (B3LYP) calculations

The FT-Raman and FT-IR spectra for 3-Ethylpyridine (3-EP) have been recorded in the region 4000-100 cm(-1) and compared with the harmonic vibrational frequencies calculated using HF/DFT (B3LYP) method by employing 6-31G(d,p) and 6-311++G(d,p) basis set with appropriate scale factors. IR intensities and Raman activities are also calculated by HF and DFT (B3LYP) methods. Optimized geometries of the molecule have been interpreted and compared with the reported experimental values of some substituted benzene. The experimental geometrical parameters show satisfactory agreement with the theoretical prediction from HF and DFT. The scaled vibrational frequencies at B3LYP/6-311++G(d,p) seem to coincide with the experimentally observed values with acceptable deviations. The theoretical spectrograms (IR and Raman) have been constructed and compared with the experimental FT-IR and FT-Raman spectra. Some of the vibrational frequencies of the pyridine are effected upon profusely with the C2H5 substitutions in comparison to pyridine and these differences are interpreted.     

Vibrational spectroscopic (FTIR and FTRaman) investigation using ab initio (HF) and DFT (LSDA and B3LYP) analysis on the structure of Toluic acid

The FTRaman and FTIR spectra for Toluic acid (TA) have been recorded in the region 4000-100 cm(-1) and compared with the harmonic vibrational frequencies calculated using HF/DFT (LSDA and B3LYP) method BY employing 6-311G (d, p) basis set with appropriate scale factors. IR intensities and Raman activities are also calculated by HF and DFT (LSDA/B3LYP) methods. Optimized geometries of the molecule have been interpreted and compared with the reported experimental values for benzoic acid and some substituted benzoic acids. The experimental geometrical parameters show satisfactory agreement with the theoretical prediction from HF and DFT. The scaled vibrational frequencies at B3LYP/6-311G (d, p) seem to coincide with the experimentally observed values with acceptable deviations. The theoretical spectrograms (IR and Raman) have been constructed and compared with the experimental FT-IR and FT-Raman spectra. Some of the vibrational frequencies of the TA are effected upon profusely with the methyl substitutions in comparison to benzoic acid and these differences are interpreted.