Spectral analysis of Mn2+, Co2+ and Ni2+: B2O3-ZnO-PbO glasses

This paper reports on the spectral properties of Mn2+, Co2+ and Ni2+ ions doped B2O3-ZnO-PbO glasses. XRD, FT-IR spectra and DSC profiles of these glasses have also been carried out, and the FT-IR profiles have shown the presence of both BO3 and BO4 units. It is interesting to notice that the FT-IR peak positions are slightly shifted towards higher energy with an increase in transition metal ion concentration change. From the measured DSC thermograms, glass transition (T(g)), crystallization (T(c)) and temperature of melting (T(m)) have been evaluated. From the UV absorption spectra of Mn2+, Co2+ and Ni2+ ions doped glasses, both direct and indirect optical band gaps have been calculated. The visible absorption spectra of Mn2+:glasses have shown a broad absorption band at 520 nm (6A1g(S) --> 4T1g(G)); with Co2+ ions one absorption band at 605 nm (4A2(4F) --> 4T1(4P)) and another at 1450 nm (4A2(4F) --> 4T1(4F)); and for Ni2+:glasses three absorption bands at 420 nm (3A2g(F) --> 3T1g(P)), 805 nm (3A2g(F) --> 1Eg(D)) and 880 nm (3A2g(F) --> 3T1g(F)) have been observed. For Mn2+:glasses, upon excitation with 262 nm, a green emission (539 nm) with a slight blue shift; and with 392 nm, a green emission (534 nm) with a slight red shift with Mn2+ ions concentration change (0.2-0.5 mol%) has been observed. This green emission has been assigned to (4T1(G) --> 6A1(S)) d-d transition of Mn2+ ions that are in tetrahedral co-ordination. For 0.5 mol% Co2+ ions doped glass, upon excitation with 580 nm, a red emission (625 nm) has been observed which originates from 2E(2G) --> 4A2(4F) transition of Co2+ ions in tetrahedral co-ordination. For Ni2+ ions doped glasses upon excitation with 420 nm, a green (577 nm) and red (670 nm) emissions are observed and are assigned to (1T2g(D) --> 3A2g(F)) and (1T2g(D) --> 3T2g(F)) d-d transitions of Ni2+ ions in octahedral co-ordination.     

Rhodium-catalyzed [2 + 2 + 2] cycloaddition of alkenyl isocyanates and alkynes

A rhodium(I)-catalyzed [2 + 2 + 2] cycloaddition between alkenyl isocyanates and alkynes has been developed. Heating a mixture of an alkenyl isocyanate and a symmetrical internal alkyne in the presence of [Rh(ethylene)2Cl]2/P(4-OMe-C6H4)3 in toluene delivers substituted indolizinones and quinolizinones. Depending on the substrates, a rare fragmentation of the isocyanate unit can be involved within the cycloaddition process to furnish a vinylogous amide embedded in the indolizinone.     

Tandem double intramolecular [4 + 2]/[3 + 2] cycloadditions of nitroalkenes

[reaction: see text]. A new class of tandem [4 + 2]/[3 + 2] cycloadditions of nitroalkenes is described in which both pericyclic processes are intramolecular. Two subclasses of intra [4 + 2]/intra [3 + 2] cycloadditions have been explored in which the dipolarophile is tethered at either C(5) or C(6) of the nitronate. For both families of precursors, the cycloadditions occur in good yield and are found to be highly regio- and stereoselective. This method converts linear polyenes to functionalized polycyclic systems bearing up to six stereogenic centers.     

Rhodium N-heterocyclic carbene-catalyzed [4 + 2] and [5 + 2] cycloaddition reactions

[reactions: see text] A rhodium complex of N-heterocyclic carbene (NHC) has been developed for intra- and intermolecular [4 + 2] and intramolecular [5 + 2] cycloaddition reactions. This is the first use of a transition-metal NHC complex in a Diels-Alder-type reaction. For the intramolecular [4 + 2] cycloaddition reactions, all the dienynes studied were converted to their corresponding cycloadducts in 91-99% yields within 10 min. Moreover, up to 1900 turnovers have been obtained for the intramolecular [4 + 2] cycloaddition at 15-20 degrees C. For the intermolecular [4 + 2] cycloadditions, high yields (71-99%) of the corresponding cycloaddition products were obtained. The reaction time and yield were highly dependent upon the diene and the dienophile. For the intramolecular [5 + 2] cycloaddition reactions, all the alkyne vinylcyclopropanes studied were converted to their corresponding cycloadducts in 91-98% yields within 10 min. However, the catalytic system was not effective for an intermolecular [5 + 2] cycloaddition reaction.     

New 2+2, 3+3 and 4+4 macrocycles derived from 1,2-diaminocyclohexane and 2,6-diformylpyridine

Two new Schiff base macrocycles - a 4+4 condensation product and a meso-type 2+2 condensation product - were obtained in a reaction of trans-1,2-diaminocyclohexane and 2,6-diformylpyridine. Reduction of these compounds led to the corresponding 4+4 and 2+2 macrocyclic amines. The macrocycles were characterised by NMR spectroscopy and electrospray mass spectrometry. The symmetry and stereochemistry of these macrocycles, as well as of new 3+3 and 4+4 diastereomers identified in solution, has been established. X-Ray structures of the 2+2 and 4+4 Schiff base macrocycles confirm the configurations determined on the basis of spectroscopic investigations. The crystal structures reveal that the centres of the square-shaped 4+4 macrocycles form channels as a result of columnar stacking.     

Metastable phase equilibria in the systems K2SO4 + K2B4O7 + H2O and KCl + K2B4O7 + H2O at 308.15 K

Experimental studies on the metastable solubilities and physicochemical properties (density and refractive index) in the ternary systems K₂SO₄ + K₂B₄O₇ + H₂O and KCl + K₂B₄O₇ + H₂O at 308.15 K were determined with the method of isothermal evaporation. According to the experimental results, the phase diagrams of the two ternary systems were plotted. In the phase diagrams, there are both two isotherm evaporation curves, one eutectic point corresponding to K₂SO₄ + K₂B₄O₇ · 4H₂O, and KCl + K₂B₄O₇ · 4H₂O, respectively. Both of the ternary systems belong to a simple eutectic type, and neither double salts nor solid solutions formed in the ternary systems. A comparison of the stable and metastable phase diagrams of the ternary systems K₂SO₄ + K₂B₄O₇ + H₂O and KCl + K₂B₄O₇ + H₂O shows that the supersaturated phenomenon of potassium borate tetrahydrate is significant and easier to appear the metastable behavior.     

PtCl2-Promoted cyclopropane opening in [4+2+2] homo Diels-Alder cycloadducts

A new and readily available catalytic system has been developed to open the cyclopropane ring in [4+2+2] homo Diels-Alder cycloadducts formed by reaction of norbornadienes and 1,3-butadiene. The cobalt-mediated homo Diels-Alder reaction followed by this PtCl₂-promoted isomerization is a key step in the efficient route to bicyclo[5.3.0]decanes, core of numerous natural products.     

A calixarene based fluorescent Sr2+ and Ca2+ probe

A fluorescent probe, PyCalix, which has two pyrene moieties at the lower rim of a calix[4]arene fixed in the cone conformation was synthesized and its complexation behavior with alkali and alkaline earth cations was studied by fluorescence spectrometry. The compound showed intramolecular excimer emission at approximately 480 nm in the fluorescence spectra. Upon complexation with alkaline earth metal cations, a decrease of excimer emission was observed. The decrease of excimer emission was accompanied by an increase of monomer emission of pyrenes at 397 nm. The order of complexation constants of PyCalix with metal ions was Sr(+ approximately Ca2+ > Ba2+ > Mg2+ > K+ > Na+ > Cs+ for all reagents. PyCalix doped polyvinyl chloride (PVC) membrane was fabricated and our results showed that this membrane can be used for selective detection of Sr2+.     

Theoretical investigation on the electronic and geometric structure of GaN2+ and GaN4+

The electronic and geometric structures of gallium dinitride cation, GaN2+ and gallium tetranitride cation, GaN4+ were systematically studied by employing density functional theory (DFT-B3LYP) and perturbation theory (MP2, MP4) in conjunction with large basis sets, (aug-)cc-pVxZ, x = T, Q. A total of 7 structures for GaN2+ and 24 for GaN4+ were identified, corresponding to minima, transition states, and saddle points. We report geometries and dissociation energies for all the above structures as well as potential energy profiles, potential energy surfaces, and bonding mechanisms for some low-lying electronic states. The calculated dissociation energy (De) of the ground state of GaN2+, X1Sigma+, is 5.6 kcal/mol with respect to Ga+(1S) + N2(X1Sigmag+) and that of the excited state, ?3Pi, is 24.8 kcal/mol with respect to Ga+(3P) + N2(X1Sigmag+). The ground state and the first excited minimum of GaN4+ are of 1A1(C2v) and 3B1(C2v) symmetry with corresponding De of 11.0 and 43.7 kcal/mol with respect to Ga+(1S) + 2N2(X1Sigmag+) for X1A1 and Ga+(3P) + 2N2(X1Sigmag+) for 3B1.     

Thermoluminescence study of persistent luminescence materials: Eu2+- and R3+-doped calcium aluminates, CaAl2O4:Eu2+,R3+

Thermoluminescence properties of the Eu2+-, R3+-doped calcium aluminate materials, CaAl2O4:Eu2+,R3+, were studied above room temperature. The trap depths were estimated with the aid of the preheating and initial rise methods. The seemingly simple glow curve of CaAl2O4:Eu2+ peaking at ca. 80 degrees C was found to correspond to several traps. The Nd3+ and Tm3+ ions, which enhance most the intensity of the high-temperature TL peaks, form the most suitable traps for intense and long-lasting persistent luminescence, too. The location of the 4f and 5d ground levels of the R3+ and R2+ ions were deduced in relation to the band structure of CaAl2O4. No clear correlation was found between the trap depths and the R3+ or R2+ level locations. The traps may thus involve more complex mechanisms than the simple charge transfer to (or from) the R3+ ions. A new persistent luminescence mechanism presented is based on the photoionization of the electrons from Eu2+ to the conduction band followed by the electron trapping to an oxygen vacancy, which is aggregated with a calcium vacancy and a R3+ ion. The migration of the electron from one trap to another and also to the aggregated R3+ ion forming R2+ (or R3+-e-) is then occurring. The reverse process of a release of the electron from traps to Eu2+ will produce the persistent luminescence. The ability of the R3+ ions to trap electrons is probably based on the different reduction potentials and size of the R3+ ions. Hole trapping to a calcium vacancy and/or the R3+ ion may also occur. The mechanism presented can also explain why Na+, Sm3+, and Yb3+ suppress the persistent luminescence.     

Theoretical study of local structure for Ni2+ ions at tetragonal sites in K2ZnF4:Ni2+ system

A theoretical method for studying the local lattice structure of Ni2+ ions in (NiF6)(4-) coordination complex is presented. Using the ligand-field model, the formulas relating the microscopic spin Hamiltonian parameters with the crystal structure parameters are derived. Based on the theoretical formulas, the 45 x 45 complete energy matrices for d8 (d2) configuration ions in a tetragonal ligand-field are constructed. By diagonalizing the complete energy matrices, the local distortion structure parameters (R perpendicular and R || ) of Ni2+ ions in K2ZnF4:Ni2+ system have been investigated. The theoretical results are accorded well with the experimental values. Moreover, to understand the detailed physical and chemical properties of the fluoroperovskite crystals, the theoretical values of the g factor of K2ZnF4:Ni2+ system at 78 and 290 K are reported first.     

Cd2+和Ni2+在粉煤灰上的吸附特性

考察了粉煤灰对Cd2+和Ni2+的单组分吸附和双组分吸附性能。结果表明,粉煤灰可有效吸附水溶液中的Cd2+和Ni2+,去除率随pH升高而增加。吸附约60min后趋于平衡。粉煤灰对Ni2+的吸附容量高于Cd2+。单组分吸附平衡符合Freundlich模型和Redlich Peterson (R P)模型。双组分吸附时,Ni2+和Cd2+之间存在明显的竞争吸附效应;随干扰离子浓度升高,竞争吸附效应增强。不同模型拟合结果表明,双组分吸附平衡符合Freundlich竞争吸附模型。脱附实验表明,Cd2+比Ni2+易于脱附;0.1mol/L HCl、0.1mol/L HNO3 和0.05mol/L H2SO4的脱附效果接近,对Cd2+脱附率>60%,对Ni2+脱附率>35%。     

Tandem double intramolecular [4+2]/[3+2] cycloadditions of nitroalkenes. The fused/bridged mode

A new class of tandem [4+2]/[3+2] cycloadditions of nitroalkenes is described in which both pericyclic processes are intramolecular. Two subclasses of intra [4+2]/intra [3+2] cycloadditions have been explored in which the dipolarophile is tethered at either C(5) or C(6) of the nitronate. For both families of precursors, the cycloadditions occur in good yield and are found to be highly regio- and stereoselective. This method converts linear polyenes to functionalized polycyclic systems bearing up to six stereogenic centers.     

Recent advances in "formal" ruthenium-catalyzed [2+2+2] cycloaddition reactions of diynes to alkenes

"Formal" and standard RuII-catalyzed [2+2+2] cycloaddition of 1,6-diynes to alkenes gave bicyclic 1,3-cyclohexadienes in relatively good yields. When terminal 1,6-diynes 1 were used, two isomeric bicyclic 1,3-cyclohexadienes 4 or 6 were obtained, depending on the acyclic or cyclic nature of the alkene partner. When unsymmetrical substituted 1,6-diynes 7 were used, the reaction with acyclic alkenes took place regio- and stereoselectively to afford bicyclic 1,3-cyclohexadienes 8. A cascade process that behaves as a "formal" RuII-catalyzed [2+2+2] cycloaddition explained these results. Initially, a Ru-catalyzed linear coupling of 1,6-diynes 1 and 7 with acyclic alkenes occurs to give open 1,3,5-trienes of type 3, which after a thermal disrotatory 6e(-) pi-electrocyclization led to the final 1,3-cyclohexadienes 4 and 8. When disubstituted 1,6-diyne 10 was used with electron-deficient alkenes, new exo-methylene cyclohexadienes 12 arose from a competitive reaction pathway.     

罗丹明类钯离子荧光分子探针

将烯丙基结构引入到罗丹明螺环中, 合成了荧光增强型钯离子探针RPd4. RPd4表现出对Pd²⁺的专一选择性和对其它阳离子良好的抗干扰能力. 探针荧光强度随着Pd²⁺的加入逐渐增强, 并且在微摩尔级呈现良好的线性关系, 通过拟合计算得到对Pd²⁺的检出限为0.51 μmol/L. RPd4具有较低的pK_a值(3.81±0.02), 说明该探针可以在近中性pH范围内对Pd²⁺进行选择性识别. 该探针还可以提供比色及荧光两种方式对Pd²⁺进行可视化检测.     

Recent advances in [2+2+2] cycloaddition reactions

The [2+2+2] cycloaddition is an elegant, atom-efficient and group tolerant process for the synthesis of carbo- and heterocycles, mostly aromatic, involving the formation of several C-C bonds in a single step. Cyclotrimerisation is catalyzed by a variety of organometallic complexes, including more than 15 different metals. The aim of this tutorial review is to point out the most recent advances in this field and to encourage the use of this reaction enroute to complex molecules. After summarizing the most common catalysts and reaction conditions generally used, we survey the mechanistic features currently accepted for this reaction. Section 4 covers the scope of the different [2+2+2] cycloaddition versions starting with the cyclotrimerisation of three triple bonds, including nitriles, with especial emphasis on asymmetric reactions that create central, axial or planar chirality. Then, reactions that use double bonds are addressed. Finally, the most outstanding examples of natural products synthesis using [2+2+2] cycloadditions as a key step reported recently are shown.     

Studies on Synthetic Inorganic Ion Exchangers-III Quantitative Separations of Mg2+ -Pb2+, Zn2+ - Pb2+ Cu2+ - Pb2+, Al3+ - Pb2+, Zn2+ - Cd2+, and Mg2+ - Cd2+ on Lead Antimonate Columns

Abstract

A new inorganic ion exchanger, lead antimonate has been synthesized having an Pb:Sb ratio of 1:5 and cation exchange capacity of 1.46 mequiv./g. It is fairly stable in water and dilute solutions of acids, bases and salts. Ion distribution studies on twenty metal ions have been determined on this gel at pH 1,2,3 and 5. The following mixtures have been separated: Mg²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Cu²⁺ - Pb²⁺, Al³⁺ - Pb²⁺, Zn²⁺ - Cd²⁺ and Mg²⁺ - Cd²⁺. Mg²⁺ and Al³⁺ were removed with 0.4 M ammonium nitrate, Cu²⁺ and Zn²⁺ with 0.4 M ammonium nitrate + 0.1M nitric acid (1:1), Pb²⁺ with 0.5M nitric acid and Cd²⁺ with 0.25M nitric acid. A tentative structure of this material is proposed on the basis of chemical analysis, pH titrations, thermogravimetry and IR spectrophotometry.     

High pressure [4+2] and [2+2+2] reactions between cycloheptatriene and methyl propiolate

Under high pressure conditions, cycloheptatriene reacts with methyl propiolate to afford mono-, bis- and trisadducts all retaining, the norcaradiene structure. The four new compounds are formed via [4+21] and [2+2+2] cycloadditions. The latter are examples for the high pressure extension of the scope of homo-Diels-Alder reactions.     

Investigation on the mechanism and applications of the reaction Cl_2+2HBr=2HCl+Br_2

The mechanism of reaction CI2+2HBr=2HCI+Br2 has been carefully investigated with density functional theory (DFT) at B3LYP/6-311G** level. A series of three-centred and four-centred transition states have been obtained. The activation energy (138.96 and 147.24 kJ/mol, respectively) of two bimolecular elementary reactions CI2+HBr→HCI+BrCI and BrCI+HBr→HCI+Br2 is smaller than the dissociation energy of CI2, HBr and BrCI, indicating that it is favorable for the title reaction occurring in the bimolecular form. The reaction has been applied to the chemical engineering process of recycling Br2 from HBr. Gaseous CI2 directly reacts with HBr gas, which produces gaseous mixtures containing Br2, and liquid Br2 and HCI are obtained by cooling the mixtures and further separated by absorption with CCI4. The recovery percentage of Br2 is more than 96%, and the CI2 remaining in liquid Br2 is less than 3.0%. The paper provides a good example of solving the difficult problem in chemical engineering with basic theory.     

Simultaneous determination of Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+ by using second-derivative spectrophotometry method

A new method of simultaneous determination of Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+ is proposed here by using the second-derivative spectrophotometry method. In pH=10.35 Borax-NaOH buffer, using meso-tetra (3-methoxyl-4-hydroxylphenyl) porphyrin ([T-(3-MO-4-HP)P]) as chromomeric reagent, micelle solution was formed after Tween-80 surfactant was added into the solution containing Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+ ions. The original absorption spectrum of the above complexes was obtained after heating in the boiling water for 25 min. The second-derivative absorption peaks of five metal-porphyrin complexes can be separated from the original absorption spectrum by using chemometric tool. In this way, Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+ ions can be determined simultaneously. Under the optimal conditions, the linear ranges of the calibration curve were 0-0.60, 0-0.60, 0-0.40, 0-0.80 and 0-0.48 μg mL(-1) for Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+, respectively. The molar absorptivity of these color systems were 1.38×10(5), 1.01×10(5), 3.24×10(5), 1.07×10(5) and 1.29×10(5)Lmol(-1)cm(-1). The method developed in this paper has advantages in selectivity, sensitivity, operation and can effectively resolve spectra overlapping problem. This method has been applied to determine the real samples with satisfactory results.