Enantioselective oxidation of olefins catalyzed by chiral copper bis(oxazolinyl)pyridine complexes: a reassessment

Copper complexes of chiral tridentate pybox ligands synthesized using a modified procedure have been studied as catalysts for the enantioselective allylic oxidation of olefins. A variety of olefins have been used in this reaction. Using 5 mol% of a Cu(II) complex of the tridentate pybox ligand, phenylhydrazine, and tert-butyl perbenzoate as oxidant in acetone, optically active allylic benzoates were obtained up to 94% ee in few hours. It was also observed that the use of molecular sieves in the reaction did not alter the enantioselectivity. Temperature was found to be very crucial in rate of the enantioselective allylic oxidation of olefins. Using EPR spectra, it has been shown that the Cu(II) species is reduced to Cu(I) by phenylhydrazine and phenylhydrazone, but the reduction with the former is faster in comparison to the latter. It was concluded that the rate enhancement was not specific to the presence of phenylhydrazine or phenylhydrazone, but both were equally responsible provided acetone was used as a solvent.     

不对称氨羟化反应

介绍了Sharpless等人新近发现的不对称氨羟化反应,该反应可将烯烃直接转化成为手性β-氨基醇类化合物。对于有些烯烃,Sharpless不对称氨羟化反应具有高的区域选择性(20:1)和高的对映选择性(>98%e.e.)。     

Direct asymmetric aldol reactions catalyzed by nanocrystalline copper(II) oxide

The direct asymmetric aldol reactions of aromatic and heteroaromatic aldehydes with acetone to afford chiral β-hydroxy carbonyl compounds in good yields and good to moderate enantioselectivities are realized using nanocrystalline copper(II) oxide in the presence of (1S,2S)-(−)-1,2-diphenylethylenediamine at −30 °C. The catalyst can be reused for four cycles with consistent activity and enantioselectivity.     

Asymmetric catalysis of ene reactions with trifluoropyruvate catalyzed by dicationic palladium(II) complexes

Chiral dicationic SEGPHOS-Pd(II) complex achieves a high chemical yield, (E)-olefin selectivity, anti-diastereoselectivity, along with high enantioselectivity even with less reactive mono- and 1,2-disubstituted olefins in this much less reactive ketone-ene reactions. The high levels of enantioselectivity stem from the effective shielding with diphenyl groups on phosphines caused by the narrow dihedral angle of metal complexes with SEGPHOS.     

Platinum(II) complex-catalyzed enantioselective aldol reaction with ketene silyl acetals in DMF at room temperature

[{(R)-binap}Pt(μ-OH)]₂2X is a weak Lewis acid, which can catalyze the enantioselective aldol reaction of aldehydes with ketene silyl acetals in DMF at room temperature. The platinum(II) complex-catalyzed the enantioselective aldol reaction of aldehydes with 1-methoxy-2-methyl-(1-trimethylsilyloxy)propene gave the corresponding aldols in high yields with enantioselectivity up to 92%. With 5 mol % loading of the complexes, the enantioselective aldol reaction of aldehydes with 1-benzyloxy-1-(trimethylsilyloxy)propene smoothly proceeded in DMF containing 10% HMPA as to predominantly give anti-propionates with enantioselectivity up to 89%, irrespective of the silyl nucleophile geometry.     

Activation of N-sulfonyl oxaziridines using copper(II) catalysts: aminohydroxylations of styrenes and 1,3-dienes

N-Sulfonyl oxaziridines are susceptible to electrophilic activation using copper(II) catalysts and react with styrenes under these conditions to provide 1,3-oxazolidines in a formal aminohydroxylation of the alkene. We propose a two-step mechanism involving a cationic intermediate to account for the rate differences and regioselectivities observed using a variety of styrenes. In accord with our hypothesis, aminohydroxylations of a range of substrates bearing electron-stabilizing groups are successful, and 1,3-dienes are particularly good substrates for copper(II)-catalyzed aminohydroxylation. Reactions of unsymmetrical dienes provide good to excellent olefin selectivity, the sense and magnitude of which can be rationalized upon consideration of the stability of the cationic intermediates suggested by our mechanism. Diastereoselective synthesis of a diverse range of densely functionalized structures can be achieved by polyfunctionalization of dienes using aminohydroxylation as a key complexity-increasing step.     

Copper(0)-induced aminocyclopropanation of olefins via deselenation of N,N-disubstituted aromatic selenoamides

Upon heating of a mixture of N,N-disubstituted aromatic selenoamides and several electron-deficient olefins in the presence of copper(0) powder, a novel deselenative cyclopropanation takes place to afford the corresponding aminocyclopropanes in good yields. When acrylonitrile is employed as an electron-deficient olefin, the aminocyclopentanation occurs in preference to the aminocyclopropanation by prolonging the reaction time. The obtained aminocyclopropane derivatives can be converted to the corresponding 1,4-dicarbonyl compounds upon treatment with 2 N HCl.     

Fluorescence resonance energy transfer disposable sensor for copper(II)

A disposable sensor has been developed for the measurement of copper(II) concentration in aqueous solution based on a change in the fluorescence of porphyrazine 2,7,12,17-tetra-tert-butyl-5,10,15,20-tetraaza-21H,23H-porphine (TP). The sensor was constructed by spin-coating a polyester support with a PVC solution containing TP, a plasticizer, the chelating agent Zincon and the ion-pairing benzetonium chloride. The measurement principle is based on the radiationless resonance energy transfer (RET) from TP immobilized in membrane, and acting as fluorescence donor, to Zincon acting as an acceptor induced by copper(II). The absorption spectrum of the Zincon-Cu(II) complex presents adequate overlapping with the emission spectrum of TP, producing a useful analytical signal by the RET process.The disposable sensor responds to copper(II) irreversibly over a dynamic range from 0.039 to 14 μmol L⁻¹ (2.5-890 μg L⁻¹) with a sensor-to-sensor reproducibility (relative standard deviation RSD) of 1.9%, as log aCu2+, at the medium level of the range and a response time of 10 min. The performance of the optical disposable sensor was tested for the analysis of copper in different types of natural waters (river, well, spring and swimming pool), validating results against a reference procedure.     

Preparation,spectroscopic characterization and X-ray crystal and molecular structures of nickel(II), copper(II) and zinc(II) complexes of the Schiff base formed from isatin and S-methyldithiocarbazate (Hisa-sme)

Complexes of general formula, [M(isa-sme)₂] · n(solvate) [M = Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺; isa-sme = monoanionic form of the Schiff base formed by condensation of isatin with S-methyldithiocarbazate; n = 1 or 1.5; solvate = MeCN, DMSO, MeOH or H₂O] have been synthesized and characterized by a variety of physicochemical techniques. An X-ray crystallographic structure determination of the [Ni(isa-sme)₂] · MeCN complex reveals a six-coordinate, distorted octahedral geometry. The two uninegatively charged, tridentate, Schiff base ligands are coordinated to the nickel(II) ion meridionally via the amide O-atoms, the azomethine N-atoms and the thiolate S-atoms. By contrast, the crystal structure of [Zn(isa-sme)₂] · MeOH shows a four-coordinate distorted tetrahedral geometry. The two dithiocarbazate ligands are coordinated as N, S bidentate chelates with the amide O-atom not coordinated. The structure of the copper(II) complex [Cu(isa-sme)₂] · DMSO is complicated and comprises two different complexes in the asymmetric unit, one four- and the other five-coordinate. The four-coordinate copper(II) has a distorted (flattened) tetrahedral geometry as seen in the Zn(II) analogue whereas the five-coordinate copper(II) has a distorted square-pyramidal geometry with one ligand coordinated to the copper(II) ion as a tridentate (N, S, O) ligand and the other coordinated as a bidentate N, S chelate. EPR spectroscopy indicates that in solution only one form is present, that being a distorted tetrahedral complex.     

Olefin cyclopropanation with aryl diazocompounds upon catalysis by a dirhodium(II) complex

A dirhodium(II) complex with N-perfluorooctylsulfonylprolinate ligands is found to catalyze the cyclopropanation of olefins with simple aryl diazomethanes. In contrast to previously reported dirhodium(II) catalysts, the present complex works well not only with very electron-rich olefins such as enol ethers, but also with styrenes. Consequently, the present catalyst allows to prepare functionalized diarylcyclopropanes in moderate yields with good diastereoselectivity for the cis product, whereas the enantioselectivity of the reaction appears negligible.     

Kinetic method for determination of nanogram amounts of copper(II) by its catalytic effect on hexacynoferrate(III)-citric acid indicator reaction

This paper describes a highly sensitive, selective catalytic-kinetic-spectrophotometric method for the determination of copper(II) concentration as low as 6 ng ml⁻¹. The method is based on the catalytic effect of copper(II) on the oxidation of citric acid by alkaline hexacyanoferrate(III). The reaction was followed by measuring the decrease in absorbance of hexacyanoferrate(III) at 420 nm (λ_max of [Fe(CN)₆]³⁻, ∈ = 1020 dm³ mol⁻¹ cm⁻¹). The dependence of rate of the indicator reaction on the reaction variables has been studied and discussed to propose a suitable mechanism to get a relation between the reaction rate and [Cu²⁺]. A fixed time procedure has been used to obtain a linear calibration curve between the initial rate and lower [Cu²⁺] or log[Cu²⁺] in the range 1 × 10⁻⁷ to 4 × 10⁻⁴ mol l⁻¹ (6.35-25,400 ng ml⁻¹). The detection limit has been calculated to be 4 ng ml⁻¹. The maximum average error is 3.5%. The effect of the presence of various cations, commonly associated with copper(II) and some anions has also been investigated and discussed. The proposed method is sensitive, accurate, rapid and inexpensive compared to other techniques available for determination of copper(II) in such a large range of concentration. The new method has been successfully applied for the determination of copper(II) in various samples.     

N-Hydroxyphthalimide in combination with Cu(II), Co(II) or Mn(II) salts as catalytic systems for the oxidation of isopropyl-aromatic hydrocarbons with oxygen

Catalytic systems consisting of N-hydroxyphthalimide in combination with copper(II), cobalt(II) and manganese(II) acetylacetonate, acetate or chloride were applied to the oxidation of cumene with oxygen. The use of these catalytic systems decreases cumyl hydroperoxide selectivity as a result of the decomposition reaction of hydroperoxide to 2-phenyl-2-propanol and acetophenone. It has been demonstrated that the use of N-hydroxyphthalimide in combination with copper salts at 60 °C results in high alcohol content whereas ketone is the major product at 90 °C. The results can be used to develop a method for alcohol or ketone synthesis from other isopropyl-aromatic hydrocarbons.     

A first high enantiocontrol of an asymmetric tertiary carbon center attached with a fluoroalkyl group via Rh(I)-catalyzed conjugate addition reaction

Treatment of fluoroalkylated electron-deficient olefins with various boronic acids in the presence of a catalytic amount of Rh(I) coordinated with (S)-BINAP in toluene/H₂O at the reflux temperature for 3 h gave the corresponding conjugate addition products with high enantioselectivity in high yields.     

Catalytic efficacy of Schiff-base copper(II) complexes: Synthesis,X-ray structure and olefin oxidation

Three copper(II) Schiff-base complexes, [Cu(L¹)(H₂O)](ClO₄) (1), [Cu(L²)] (2) and [Cu(L³)] (3) have been synthesized and characterized [where HL¹ = 1-(N-ortho-hydroxy-acetophenimine)-2-methyl-pyridine], H₂L² = N,N′-(2-hydroxy-propane-1,3-diyl)-bis-salicylideneimine and H₂L³ = N,N′-(2,2-dimethyl-propane-1,3-diyl)-bis-salicylideneimine]. The structure of complex 1 has been determined by single crystal X-ray diffraction analysis. In complex 1, the copper(II) ion is coordinated to one oxygen atom and two nitrogen atoms of the tridentate Schiff-base ligand, HL¹. The fourth coordination site of the central metal ion is occupied by the oxygen atom from a water molecule. All the complexes exhibit high catalytic activity in the oxidation reactions of a variety of olefins with tert-butyl-hydroperoxide in acetonitrile. The catalytic efficacy of the copper(II) complexes towards olefin oxidation reactions has been studied in different solvent media.     

Coordination to copper(II) strongly enhances the in vitro antimicrobial activity of pyridine-derived N(4)-tolyl thiosemicarbazones

Five copper(II) complexes with N(4)-ortho, N(4)-meta and N(4)-para-tolyl thiosemicarbazones derived from 2-formyl and 2-acetylpyridine were obtained and thoroughly characterized. The crystal structure of N(4)-meta-tolyl-2-acetylpyridine thiosemicarbazone (H2Ac4mT) was determined, as well as that of its copper(II) complex [Cu(2Ac4mT)Cl], which contains an anionic ligand and a chloride in the coordination sphere of the metal. The in vitro antimicrobial activities of all thiosemicarbazones and their copper(II) complexes were tested against Salmonella typhimurium and Candida albicans. Upon coordination a substantial decrease in the minimum inhibitory concentration, from 225 to 1478 μmol L⁻¹ for the thiosemicarbazones to 5–30 μmol L⁻¹ for the complexes was observe against the growth of Salmonella typhimurium and from 0.7–26 to 0.3–7 μmol L⁻¹ against the growth of C. albicans, suggesting that complexation to copper(II) could be an interesting strategy of dose reduction.     

The structures of some (hexamethyl-1,5,9,13-tetraazacyclohexadecadiene)copper(II) compounds

The structure of the crystalline azamacrocyclic product formed by reaction of bis(propane-1,3-diamine)copper(II) perchlorate with acetone has been determined as N-rac-(6,8,8,14,16,16-hexamethyl-1,5,9,13-tetraazacyclohexadeca-5,13-diene)copper(II) · N-meso-(6,8,8,14,14,16-hexamethyl-1,5,9,13-tetraazacyclohexadeca-5,16(1)-diene)copper(II) perchlorate, with the cis, 5,16(1)-diene, and trans, 5,13-diene, isomeric cations co-crystallised. The structures of three compounds crystallised from solutions of this mixture have been determined. N-rac-(6,8,8,14,14,16-hexamethyl-1,5,9,13-tetraazacyclohexadeca-5,16(1)-diene)copper(II) tetrachlorozincate has an irregular flattened tetrahedral coordination geometry with trans-N-Cu-N angles of 139.27(8)° and 155.94(8)°. (Hexamethyl-1,5,9,13-tetraazacyclohexadecadiene)(thiocyanato-N)copper(II) perchlorate has twofold symmetrical square-pyramidal cations. A (μ-cyano)-tetracyanonickelate(II) compound has two (hexamethyl-1,5,9,13-tetraazacyclohexadecadiene)copper(II) cations each with a single axially coordinated tetracyanonickelate(II) group. The compounds, except for the tetrachlorozincate(II) salt, show disorder in the location of the imine functions and axial methyl substituents, attributed to co-crystallisation of enantiomers for the N-rac-trans isomer and/or of rotated arrangements of the N-meso-cis isomer. For the thiocyanato and tetracyanonickelato compounds this disorder precluded unambiguous assignment of configuration.     

Antimony film screen-printed carbon electrode for stripping analysis of Cd(II), Pb(II), and Cu(II) in natural samples

An in-situ antimony film screen-printed carbon electrode (in-situ SbSPCE) was successfully used for the determination of Cu(II) simultaneously with Cd(II) and Pb(II) ions, by means of differential pulse anodic stripping voltammetry (DPASV), in a certified reference groundwater sample with a very high reproducibility and good trueness. This electrode is proposed as a valuable alternative to in-situ bismuth film electrodes, since no competition between the electrodeposited copper and antimony for surface sites was noticed. In-situ SbSPCE was microscopically characterized and experimental parameters such as deposition potential, accumulation time and pH were optimized. The best voltammetric response for the simultaneous determination of Cd(II), Pb(II) and Cu(II) ions was achieved when deposition potential was −1.2 V, accumulation time 120 s and pH 4.5. The detection and quantification limits at levels of μg L⁻¹ suggest that the in-situ SbSPCE could be fully suitable for the determination of Cd(II), Pb(II) and Cu(II) ions in natural samples.     

Luminescent hexanuclear Cu(I)-cluster for the selective determination of copper

For the first time, the formation of a luminescent hexanuclear cluster has been used for the selective determination of copper. In aqueous solutions, the non-luminescent ligand N-ethyl-N′-methylsulfonylthiourea (EMT) forms an intensely red luminescent hexanuclear Cu(I)-cluster with an emission maximum at 663 nm only with Cu(II) ions. The intensity of the luminescence is proportional to the Cu(II) concentration and allows for selective Cu determinations in the μg l⁻¹-range. Ubiquitous metal ions such as Fe(III), Al(III), Ca(II), Mg(II), and alkaline metal ions, as well as other heavy metal ions, e.g. Co(II), Ni(II), Zn(II), Cd(II), Hg(II), and Pb(II) are tolerated in concentrations up to 50 mg l⁻¹. The detection limit for Cu(II) in aqueous solution, calculated according to Funk et al. [Qualitätssicherung in der Analytischen Chemie, Verlag Chemie, Weinheim, 1992], is 113 μg l⁻¹. The cluster formation has been used for the quantitative analysis of copper in tap water and in industrial water, as well as for the localization of copper adsorbed by activated-sludge flocs.     

Use of Nb(2)O(5)-SiO(2) in an automated on-line preconcentration system for determination of copper and cadmium by FAAS

A procedure for the determination of trace level of copper(II) and cadmium(II) by FAAS using an on-line preconcentration system has been proposed. In this system, copper and cadmium ions were adsorbed onto a minicolumn packed with silica gel modified with niobium(V) oxide (Nb₂O₅-SiO₂), followed by nitric acid elution in reverse mode and determination on-line by flame atomic absorption spectrometry (AAS) without interference of the matrix. Chemical and flow variables as well as concomitant ions were studied in the developed procedure. The enrichment factor for copper(II) and cadmium(II) was 34.2 and 33.0, respectively, using a preconcentration time of 2 min. The limit of detection for copper(II) and cadmium(II) was 0.4, and 0.1 μg l⁻¹, respectively. The precision of the method, evaluated as the relative standard deviation in solutions containing 15 μg l⁻¹ of copper and 10 μg l⁻¹ of cadmium, by analyzing a series of seven replicates, was 1.8 and 1.6%, respectively. The accuracy was assessed through recovery experiments of certified material and water samples.     

Addition reaction of 2-phenylbenzoic acid onto unactivated olefins catalyzed by Ru(II)-xantphos catalysis

Ru(II)-xantphos catalysis is found to be effective for the addition reaction of 2-phenylbenzoic acid onto unactivated olefins. Thus, the reactions of 2-phenylbenzoic acid and unactivated olefins are carried out in the presence of 5 mol % of Ru(II)-xantphos catalysis in refluxing CHCl₃ for 48 h to afford the corresponding esters in 40-95% yield. The control experiments indicate that the influence of TfOH for Brønsted acid catalyst was vanishingly small in our new catalytic system.