Water soluble amino grafted silicon nanoparticles and their use in polymer solar cells

Stable aqueous amino-grafted silicon nanoparticles(SiNPs-NH2) were prepared via one-pot solution method. By grafting amino groups on the particle surface, the dispersion of SiNPs in water became very stable and clear aqueous solutions could be obtained. By incorporating SiNPs-NH2 into the hole transport layer of poly(3,4-ethylenedioxythiophene)/polystyrene sulfonic acid(PEDOT:PSS), the performance of polymer solar cells composed of poly[2-methoxy,5-(2'-ethylhexyloxy)-1,4-phenylene vinylene](MEH-PPV):[6,6]-phenyl-C61-butyric acid methyl ester(PCBM) as active layer can be improved. SiNPs-NH2 are dispersed uniformly in the PEDOT:PSS solution and help form morphologies with small-sized domains in the PEDOT:PSS film. SiNPs-NH2 serve as screens between conducting polymer PEDOT and ionomer PSS to improve the phase separation and charge transport of the hole transport layer. As a result, the sheet resistance of PEDOT:PSS thin films is decreased from(93 ± 5) × 105 to(13 ± 3) × 105 ?/□. The power conversion efficiency(PCE) of polymer solar cells was thus improved by 9.8% for devices fabricated with PEDOT:PSS containing 1 wt% of SiNPs-NH2, compared with the devices fabricated by original PEDOT:PSS.     

Microwave-assisted synthesis of organic–inorganic poly(3,4-ethylenedioxythiophene)/RuO2·xH2O nanocomposite for supercapacitor

An organic–inorganic poly(3,4-ethylenedioxythiophene) (PEDOT)/RuO₂·xH₂O nanocomposite (approximately 1 wt.% RuO₂) has been successfully prepared for the first time under microwave irradiation within 5 min with power 900 W via in situ chemical polymerization. The morphology and structure of the resultant material is characterized by transmission electron microscope and Fourier transform infrared. Moreover, the electrochemical properties of the synthesized nanocomposite can be controlled by adjusting the annealing temperature, which is definitely illustrated by cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectra. Electrochemical data have shown that the PEDOT/RuO₂·xH₂O nanocomposite annealed at 150 °C possesses the most favorable charge/discharge ability with a specific capacitance of 153.3 F g⁻¹ at a current density of 150 mA g⁻¹ and the high efficient utilization of PEDOT at various current densities. Furthermore, such composite has a less capacitance degradation of 23.8% after 1,000 continuous cycles. The improved electrochemical performance are mainly attributed to the large electroactive surface of nanocomposite and the existence of amorphous RuO₂·xH₂O particles as well as a synergistic effect of the polymer PEDOT and annealed RuO₂·xH₂O. Thus, the PEDOT/RuO₂·xH₂O nanocomposite annealed at 150 °C can act as a promising electroactive material for supercapacitor application.     

Conductivity enhancement of PEDOT:PSS film via sulfonic acid modification: application as transparent electrode for ITO-free polymer solar cells

3-Hydroxy-1-propanesulfonic acid(HPSA)was applied as a modification layer on poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)film via spin-coating,resulting in a massive boost of the conductivity of PEDOT:PSS film,and thus the as-formed PEDOT:PSS/HPSA bilayer film was successfully used as a transparent electrode for ITO-free polymer solar cells(PSCs).Under the optimized concentration of HPSA(0.2 mol L~(-1)),the PEDOT:PSS/HPSA bilayer film has a conductivity of 1020 S cm~(-1),which is improved by about 1400 times of the pristine PEDOT:PSS film(0.7 S cm~(-1)).The sheet resistance of the PEDOT:PSS/HPSA bilayer film was 98Ωsq~(-1),and its transparency in the visible range was over 80%.Both parameters are comparable to those of ITO,enabling its suitability as the transparent electrode.According to atomic force microscopy(AFM),UV-Vis and Raman spectroscopic measurements,the conductivity enhancement was resulted from the removal of PSS moiety by methanol solvent and HPSA-induced segregation of insulating PSS chains along with the conformation transition of the conductive PEDOT chains within PEDOT:PSS.Upon applying PEDOT:PSS/HPSA bilayer film as the transparent electrode substituting ITO,the ITO-free polymer solar cells(PSCs)based on poly[N-9″-hepta-decanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)]:[6,6]-phenyl C71-butyric acid methyl ester(PC_(71)BM)(PCDTBT:PC_(71)BM)active layer exhibited a power conversion efficiency(PCE)of 5.52%,which is comparable to that of the traditional ITO-based devices.     

Enzymatic‐catalyzed polymerization of water‐soluble electrically conductive polymer PEDOT:PSS

Water‐soluble electrically conductive polymer poly(3,4‐ethylenedioxythiophene) (PEDOT) was synthesized by the enzymatic‐catalyzed method using 3,4‐ethylenedioxythiophene (EDOT) as monomer, poly(styrenesulfonate) (PSS) as water‐soluble polyelectrolyte, horseradish peroxidase enzyme as catalyst, and hydrogen peroxide (H₂O₂) as oxidant. Fourier transform infrared spectra and UV–vis absorption spectra confirm the successful enzymatic‐catalyzed polymerization of PEDOT. Dynamic light scattering data confirm the formation of a stable PEDOT:PSS aqueous dispersion. The thermo gravimetric data show that the obtained PEDOT is stable over a fairly high range of temperatures. The atomic force microscopy height images show that the PEDOT:PSS aqueous dispersion can form excellent homogeneous and smooth films on various substrates by conventional solution processing techniques, which renders this PEDOT:PSS aqueous dispersion a very promising candidate for various application in electronic devices. This enzymatic polymerization is a new approach for the synthesis of optical and electrical active PEDOT polymer, which benefits simple setting, high yields, and environmental friendly route. Copyright © 2014 John Wiley & Sons, Ltd.     

Electrochemiluminescence Biosensor Based on PEDOT‐PSS‐ Graphene Functionalized ITO Electrode

A novel and sensitive electrochemiluminescence (ECL) method for ethanol biosensor was developed by co‐immobilizing the enzyme and ECL reagent Ru(bpy)₃²⁺ on the poly‐(3,4‐ethylene dioxythiophene) and polystyrene sulfonate functionalized graphene (PEDOT‐PSS‐G) nanocomposite film. Positively charged Ru(bpy)₃²⁺ could be immobilized effectively on the electrode surface with the negatively charged PSS and graphene, which provided a stable ECL platform for further modification with the enzyme. Moreover, the introduction of PEDOT and graphene can be acted as a conducting pathway to accelerate the electron transfer due to the high conductivity. Such biosensor combined enzymatic selectivity with the amplification of PEDOT‐PSS‐G performed well with a wide linear range, high sensitivity and good stability. The sensing platform was successfully applied to determine the amounts of alcohol in real samples.     

Characterization of poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) (PEDOT:PSS) adsorption on cellulosic materials

The interaction between poly(3,4-ethylene dioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS) and cellulosic fibers was characterized in order to obtain further understanding of the conductivity properties of the modified cellulosic fiber material. Microcrystalline cellulose (MCC) was used as a model surface to study the adsorption behavior at various pH and salt concentrations, while samples of low-conductivity paper, normally used for the production of electrical insulation papers, were dipped into PEDOT:PSS dispersion and air-dried for X-ray photoelectron spectroscopy (XPS) studies. The results showed a strong interaction between the MCC and PEDOT:PSS, which implied a broad molecular distribution of the conducting polymer. With increasing pH, less amount of the conducting polymer was adsorbed whereas the amount adsorbed passed through a maximum value with varying salt concentration. Zeta potential measurement and polyelectrolyte titration were used to determine the surface charge of both suspended MCC particles and dispersed PEDOT:PSS at various pH levels and salt concentrations. Dip-coated paper samples exhibited two peaks in the S(2p) XPS spectra at 168–169 and 164–165 eV which correspond to the sulfur signals of sulfonate (in PSS) and in thiophene (in PEDOT), respectively. It was found that the PEDOT:PSS with a ratio of 1:2.5 was adsorbed more in the base paper than that with a ratio of 1:6. The PEDOT:PSS ratio on the surface of the cellulosic material was higher than that in the bulk liquid for all samples. The results indicated that PEDOT was preferentially adsorbed rather than PSS. The degree of washing of the conducting polymer did not significantly affect the PEDOT enhancement on the surface.     

Novel conducting poly(3,4-ethylenedioxythiophene) – Graphene nanocomposites with gigantic dielectric properties and narrow optical energy band gap

Novel nanocomposites, consisting of conducting poly(3,4-ethylenedioxythiophene) [PEDOT] and graphene nanoplatelets [GNPs], were successfully synthesized by in-situ chemical-oxidative polymerization of 3,4-ethylenedioxythiophene [EDOT] using ammonium peroxydisulfate as an oxidizing agent. The formation of PEDOT and its incorporation onto the surface of GNPs were confirmed by scanning electron microscopy, Fourier-transform infrared-spectroscopy, and X-ray diffraction. The optical energy band gap, E_g^opt, was determined by UV–Vis spectroscopy. Dielectric constant and loss as well as AC electrical conductivity, σ_AC, were determined in the frequency range from 10 Hz to 8 MHz. The PEDOT-GNP nanocomposites were found to have extremely large dielectric constant, ε′, significantly high σ_AC, and narrow E_g^opt values. In particular, PEDOT-GNP nanocomposite with 10 wt% GNP has a gigantic dielectric constant of the order of 9 × 10⁵ at 1 kHz and a narrow optical energy band gap of 1.26 eV. The ε′ values (10⁸ to 10⁵ in the frequency range from 10 Hz to 5 MHz) of PEDOT-10 wt% GNP are the highest among those reported in the literature for carbon based polymer nanocomposites. The massive quantity of micro-capacitors formed in the nanocomposites, prior to the creation of conductive networks, leads to the gigantic dielectric properties. The ε′ and σ_AC values of PEDOT-10 wt% GNP nanocomposite were about 90 and 400 times larger than those of pure PEDOT. Our method should be particularly promising in the development of new materials for high energy storage applications.     

Ionic electro-active polymer actuator based on cobalt-containing nitrogen-doped carbon/conducting polymer soft electrode

Nanoscale cobalt-containing nitrogen-doped porous carbon (CoNC) materials were prepared by thermolysis of a zeolitic imidazolate framework (ZIF), ZIF-67, at different temperatures and their application for ionic electro-active polymer (EAP) actuator was evaluated. CoNC-700, which was obtained from ZIF-67 pyrolysis at 700 °C, exhibits specific surface area of 753.86 m² g⁻¹, pore volume of 0.5768 cm³ g⁻¹, and specific capacitance of 120.7 F∙g⁻¹. CoNC/conducting polymer soft electrode were fabricated by unitizing effective interaction of CoNC with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). High-performance ionic actuators were developed for the first time using this CoNC/PEDOT:PSS soft electrode. The developed ionic EAP actuator exhibited large peak-to-peak displacement of 20.4 mm and high bending strain of 0.28% (3 V and 0.1 Hz). Therefore, ZIFs or metal organic frameworks (MOFs) can be applied to provide significant improvements in EAP actuators, which can play key roles as technological advances toward bioinspired actuating devices required for next-generation soft and wearable electronics.     

Mechanism of conductivity in molecular systems and polymer nanocomposites

A model is considered in which the characteristics of polymer nonocomposites based on poly(p-xylylene) are observed due to the formation of large percolation clusters consisting of semiconductor or metal nonoparticles, and to electron transfer from the surfaces of clusters on -C₆H₄- phenyl rings. It is assumed that an electrical double layer is formed near a cluster’s surface, accompanied by the appearance of excess electrons in the polymer matrix as components of -C₆H₄⁻- ion resonance. It is shown that a metallic cluster in the polymer matrix is oxidized following an increase in its electrostatic potential. This could be explained by the notable reduction in the oxidation of nanocomposite metallic clusters by atmospheric oxygen and water molecules. Upon the formation of semiconductor clusters in poly(p-xylylene) nanocomposite, conductivity is observed due to the hopping mechanism. The extra electron of the −C₆H₄⁻- anion resonance in the electric field jumps to another ring. The hopping character of nanocomposite conductivity is explained for the case of small nanoparticle concentrations using the Mott model. Precise equations from percolation cluster theory are used to explain the nonmonotonic dependency of nanocomposite photoconductivity on the concentration of semiconductor nanoparticles.     

Electrochemical detection of cystatin C by oriented antibody immobilization on streptococcal protein G–modified ZIF-8-Cu1−xNix(OH)2@Cu core-shell nanostructured electrode

Herein, we prepared a novel nanostructure involving Cu shell on Zeolitic imidazolate frameworks (ZIF-8) and Cu_1?xNi_x(OH)₂ composite (ZIF-8-Cu_1?xNi_x(OH)₂@Cu) combining sol-gel and co-precipitation method. The morphology, stoichiometry, and structure of the nanocomposite were elucidated by various physicochemical analyses. A poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) coated indium tin oxide (ITO) was modified with the synthesized ZIF-8-Cu_1?xNi_x(OH)₂@Cu nanoparticles (NPs) to obtain an efficient electrode for further antibody immobilization. The ZIF-8-Cu_1?xNi_x(OH)₂@Cu/PEDOT:PSS/ITO was applied for the detection of cystatin C, a promising biomarker of chronic kidney disease (CKD). The electrode was functionalized by streptococcal protein G (SPG) to bind the Fc region of anti-cystatin C in an oriented manner. The synergistic catalytic activities, high surface coverage, enhanced electroactive sites, and excellent redox properties of the proposed electrode lead to excellent electrochemical sensing. The proposed sensor obtained a much lower detection limit (33 pg/mL) for a linear range of 0.1 ng/mL to 1,000 ng/mL with high selectivity, stability, and reproducibility compared with bare ZIF-8/PEDOT:PSS/ITO-based immunosensor. The clinical feasibility of the sensor was confirmed by measuring the human serum in the presence of different concentrations of cystatin C. This work demonstrates a new and facile approach to fabricating a metal-organic framework (MOF) –based nanoimmunosensor for cystatin C, which has significant importance in diagnosing the renal failure.     

Properties of a nanocomposite polymer electrolyte from an amorphous comb-branch polymer and nanoparticles

Three fully amorphous comb-branch polymers based on poly(styrene-co-maleic anhydride) as a backbone and poly(ethylene glycol) methyl ether of different molecular weights as side chains were synthesized. SiO₂ nanoparticles of various contents and the salt LiCF₃SO₃ were added to these comb-branch polymers to obtain nanocomposite polymer electrolytes. The thermal and transport properties of the samples have been characterized. The maximum conductivity of 2.8×10^–4 S cm^–1 is obtained at 28 °C. In the system the longer side chain of the comb-branch polymer electrolyte increases in ionic conductivity after the addition of nanoparticles. To account for the role of the ceramic fillers in the nanocomposite polymer electrolyte, a model based on a fully amorphous comb-branch polymer matrix in enhancing transport properties of Li⁺ ions is proposed.     

High reversible capacity and rate capability of ZnCo2O4/graphene nanocomposite anode for high performance lithium ion batteries

A facile and straightforward method was adopted to synthesize ZnCo₂O₄/graphene nanocomposite anode. In the first step, pure ZnCo₂O₄ nanoparticles were synthesized using urea-assisted auto-combustion synthesis followed by annealing at a low temperature of 400 °C. In the second step, in order to synthesize ZnCo₂O₄/graphene nanocomposite, the obtained pure ZnCo₂O₄ nanoparticles were milled with 10 wt% reduced graphene nanosheets using high energy spex mill for 30 s. The ZnCo₂O₄ nanoparticles, with particle sizes of 25–50 nm, were uniformly dispersed and anchored on the reduced graphene nanosheets. Compared with pure ZnCo₂O₄ nanoparticles anode, significant improvements in the electrochemical performance of the nanocomposite anode were obtained. The resulting nanocomposite delivered a reversible capacity of 1124.8 mAh g⁻¹ at 0.1 C after 90 cycles with 98% Coulombic efficiency and high rate capability of 515.9 mAh g⁻¹ at 4.5 C, thus exhibiting one of the best lithium storage properties among the reported ZnCo₂O₄ anodes. The significant enhancement of the electrochemical performance of the nanocomposite anode could be credited to the strong synergy between ZnCo₂O₄ and graphene nanosheets, which maintain excellent electronic contact and accommodate the large volume changes during the lithiation/delithiation process.     

Effects of Supporting Electrolytes on Spectroelectrochemical and Electrochromic Properties of Polyaniline‐poly(styrene sulfonic acid) and Poly(ethylenedioxythiophene)‐poly(styrene sulfonic acid)‐based Electrochromic Device

Electrochromic devices are fabricated by using polyaniline (PANI) doped with poly(styrene sulfonic acid) (PSS) as coloring electrodes, poly(ethylenedioxythiophene)‐poly(styrene sulfonic acid) (PEDOT‐PSS) as complementary electrodes, and hybrid polymer electrolytes as gel electrolytes. The device based on LiClO₄‐based electrolyte (weight ratio of PMMA:PC:LiClO₄ = 0.7:1.1:0.3) shows the highest optical contrast and coloration efficiency (333 cm²/C) after 1200 cycles in these devices, and the color changes from pale yellow (?0.5 V) to dark blue (+2.5 V). The spectroelectrochemical and electrochromic switching properties of electrochromic devices are investigated, the maximum optical contrast (ΔT%) of electrochromic device for ITO|PANI‐PSS‖PMMA‐PC‐LiClO₄‐SiO₂‖PEDOT‐PSS|ITO are 31.5% at 640 nm, and electrochromic device based on LiClO₄‐based electrolyte with SiO₂ shows faster response time than that based on LiClO₄‐based electrolyte without SiO₂.     

Fast Visible-Light 3D Printing of Conductive PEDOT:PSS Hydrogels

Functional inks for light-based 3D printing are actively being searched for being able to exploit all the potentialities of additive manufacturing. Herein, a fast visible-light photopolymerization process is showed of conductive PEDOT:PSS hydrogels. For this purpose, a new Type II photoinitiator system (PIS) based on riboflavin (Rf), triethanolamine (TEA), and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is investigated for the visible light photopolymerization of acrylic monomers. PEDOT:PSS has a dual role by accelerating the photoinitiation process and providing conductivity to the obtained hydrogels. Using this PIS, full monomer conversion is achieved in less than 2 min using visible light. First, the PIS mechanism is studied, proposing that electron transfer between the triplet excited state of the dye (³Rf*) and the amine (TEA) is catalyzed by PEDOT:PSS. Second, a series of poly(2-hydroxyethyl acrylate)/PEDOT:PSS hydrogels with different compositions are obtained by photopolymerization. The presence of PEDOT:PSS negatively influences the swelling properties of hydrogels, but significantly increases its mechanical modulus and electrical properties. The new PIS is also tested for 3D printing in a commercially available Digital Light Processing (DLP) 3D printer (405 nm wavelength), obtaining high resolution and 500 µm hole size conductive scaffolds.     

Synthesis of conductive polymeric nanoparticles with hyaluronic acid based bioactive stabilizers for biomedical applications

In recent years, the use of organic materials to infer conductivity in biomedical devices has received increasing attention. Typical inorganic semiconductors and conductors are rigid and expensive, usually require multiple processing steps and are unsuitable for biomedical applications. Electrochemically or chemically doped conjugated polymers help to overcome these problems due to their stability, low cost, light weight and excellent electrical and optical properties. The conducting polymer poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) is the material of choice for biomedical applications as it is water soluble, however, there are growing concerns around its stabilizer, PSS, due to its release of acidic products upon degradation in-vivo. Here, we report the successful synthesis of PEDOT nanoparticles using hyaluronic acid (HA) as a stabilizer via an oxidative miniemulsion polymerisation technique. This improves the bioactivity and hydrophilicity of nanoparticles. The effect of varying amounts of HA and different molar ratios of EDOT:TOS has been studied and their role in the conductive and morphological properties of final nanoparticles has been fully elucidated. Furthermore, bioactivity and biocompatibility of the nanoparticles are demonstrated for customizable in vivo applications. Nanoparticles were found to have a conductivity up to 10 times greater than pristine PEDOT:PSS with increased addition of oxidant. The proposed easy-to-manufacture approach, along with the highlighted superior properties, expands the potential of conductive polymers in future customizable biological applications such as tissue scaffolds, nerve conduits and cardiac patches and represents a real breakthrough from the current state of the art.     

Effect of nanoscale CeO<Subscript>2</Subscript> on PVDF-HFP-based nanocomposite porous polymer electrolytes for Li-ion batteries

New poly (vinylidenefluoride-co-hexafluoro propylene) (PVDF-HFP)/CeO₂-based microcomposite porous polymer membranes (MCPPM) and nanocomposite porous polymer membranes (NCPPM) were prepared by phase inversion technique using N-methyl 2-pyrrolidone (NMP) as a solvent and deionized water as a nonsolvent. Phase inversion occurred on the MCPPM/NCPPM when it is treated by deionized water (nonsolvent). Microcomposite porous polymer electrolytes (MCPPE) and nanocomposite porous polymer electrolytes (NCPPE) were obtained from their composite porous polymer membranes when immersed in 1.0 M LiClO₄ in a mixture of ethylene carbonate/dimethyl carbonate (EC/DMC) (v/v = 1:1) electrolyte solution. The structure and porous morphology of both composite porous polymer membranes was examined by scanning electron microscope (SEM) analysis. Thermal behavior of both MCPPM/NCPPM was investigated from DSC analysis. Optimized filler (8 wt% CeO₂) added to the NCPPM increases the porosity (72%) than MCPPM (59%). The results showed that the NCPPE has high electrolyte solution uptake (150%) and maximum ionic conductivity value of 2.47 × 10⁻³ S cm⁻¹ at room temperature. The NCPPE (8 wt% CeO₂) between the lithium metal electrodes were found to have low interfacial resistance (760 Ω cm²) and wide electrochemical stability up to 4.7 V (vs Li/Li⁺) investigated by impedance spectra and linear sweep voltammetry (LSV), respectively. A prototype battery, which consists of NCPPE between the graphite anode and LiCoO₂ cathode, proves good cycling performance at a discharge rate of C/2 for Li-ion polymer batteries.     

Free‐Standing Conducting Polymer Films for High‐Performance Energy Devices

Thick, uniform, easily processed, highly conductive polymer films are desirable as electrodes for solar cells as well as polymer capacitors. Here, a novel scalable strategy is developed to prepare highly conductive thick poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (HCT‐PEDOT:PSS) films with layered structure that display a conductivity of 1400 S cm^?1 and a low sheet resistance of 0.59 ohm sq^?1. Organic solar cells with laminated HCT‐PEDOT:PSS exhibit a performance comparable to the reference devices with vacuum‐deposited Ag top electrodes. More importantly, the HCT‐PEDOT:PSS film delivers a specific capacitance of 120 F g^?1 at a current density of 0.4 A g^?1. All‐solid‐state flexible symmetric supercapacitors with the HCT‐PEDOT:PSS films display a high volumetric energy density of 6.80 mWh cm^?3 at a power density of 100 mW cm^?3 and 3.15 mWh cm^?3 at a very high power density of 16160 mW cm^?3 that outperforms previous reported solid‐state supercapacitors based on PEDOT materials.     

Highly enhanced thermoelectric performance of WS2 nanosheets upon embedding PEDOT:PSS

Two‐dimensional (2D) WS₂ nanosheets (NSs) as a promising thermoelectric (TE) material have gained great concern recently. The low electrical conductivity significantly limits its further development. Herein, we reported an effective method to enhance the TE performance of WS₂ NSs by combining poly(3,4‐ethylenedioxythiophene):poly(4‐styrenesulfonate) (PEDOT:PSS). The restacked WS₂ NSs thin film with 1T phase structure obtained by a common chemical lithium intercalation show a high Seebeck coefficient of 98 μV K^?1 and a poor electrical conductivity of 12.5 S cm^?1. The introduction of PEDOT:PSS with different contents obviously improve the electrical conductivity of WS₂ NSs thin films. Although a declining Seebeck coefficient was observed, an optimized TE power factor of 45.2 μW m^?1 k^?1 was achieved for WS₂/PEDOT:PSS composite thin film. Moreover, the as‐prepared WS₂/PEDOT:PSS thin film can be easily peeled off and transferred to other substrate leading to a more promising application. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 997–1004     

The electroactive multilayer films of polyelectrolytes and Prussian blue nanoparticles and their application for H2O2 sensors

Prussian blue (PB) nanoparticles were immobilized in polyelectrolyte (PE) multilayers of various compositions and thickness. Films containing nanoparticles and poly(allylamine hydrochloride) (PAH) were formed using the layer-by-layer adsorption method. A layer of branched poly(ethyleneimine) (PEI) was used to anchor the multilayer structure at the surface of a gold electrode. The films exhibited electroactive properties, increasing with the number of deposited PB layers. The properties of PEI/(PB/PAH) _n multilayers were then compared with the ones containing additionally the conductive polymer poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) (PEDOT:PSS). We found that the addition of the conductive, water-soluble polymer enhances the electroactive properties of the multilayer films. It also increased sensitivity of the multilayer-covered electrodes for electrochemical detection of hydrogen peroxide.     

导电高分子PEDOT/PSS稳定的Pt3Co纳米粒子的制备及电、磁性

利用一步共还原法在导电高分子聚二氧乙基噻吩/聚对苯乙烯磺酸(PEDOT/PSS)水溶液中合成了磁性纳米复合物Pt₃Co-PEDOT/PSS. 利用透射电镜(TEM)、X射线衍射(XRD)、拉曼光谱、超导量子干涉仪(SQUID)对其进行了表征.结果表明Pt₃Co纳米粒子为面心立方结构(fcc), 粒子平均粒径为9.6 nm, 标准偏差为2.4 nm. 用旋转涂膜法制备的Pt₃Co-PEDOT/PSS薄膜导电率()在1.6～4.0 S/cm之间. 当温度在阻塞温度(T_B, 110.5 K)以上时, 纳米复合物Pt₃Co-PEDOT/PSS显示出超顺磁性, 低于T_B时呈铁磁性, 在5 K时其剩磁(M_r)和矫玩力(H_c)分别为4.1 emu/g和701 Oe(奥斯特).