Length-dependent optical effects in single-wall carbon nanotubes

Among the novel chemical and physical attributes of single-wall carbon nanotubes (SWCNTs), the optical properties are perhaps the most compelling. Although much is known about how such characteristics depend on nanotube chirality and diameter, relatively little is known about how the optical response depends on length, the next most obvious and fundamental nanotube trait. We show here that the intrinsic optical response of single-wall carbon nanotubes exhibits a strong dependence on nanotube length, and we offer a simple explanation that relates this behavior to the localization of a bound exciton along the length of a nanotube. The results presented here suggest that, for a given volume fraction, the longest nanotubes display significantly enhanced absorption, near-infrared fluorescence, and Raman scattering, which has important practical implications for potential applications that seek to exploit the unique optical characteristics of SWCNTs.     

Novel hybrid materials consisting of regioregular poly(3-octylthiophene)s covalently attached to single-wall carbon nanotubes

Facile routes for the synthesis of hybrid materials consisting of regioregular poly(3-octylthiophene)s covalently attached to single-wall carbon nanotubes are presented for the first time. These materials are easily processable using common organic solvents, and at the same time combine the properties of regioregular poly(3-alkylthiophene)s with those of single-wall carbon nanotubes. Moreover, studies of the properties of these materials have provided strong evidence for an electron transfer from the regioregular poly(3-octylthiophene) to the single-wall carbon nanotube.     

Structural and reactivity properties of finite length cap-ended single-wall carbon nanotubes

The reaction of C2 with growing single-wall carbon nanotubes of different chiralities is investigated using density functional theory. It is found that the energy of the frontier orbitals for (5,5) and (6,6) armchair carbon nanotubes exhibits periodic behavior with an increasing number of carbon atoms in the nanotube. Such periodic behavior induces oscillations in the reaction energy released by adsorption of C2 to the nanotube open edge. In contrast, the energy of the frontier orbitals of the (6,5) chiral tube remains constant as the number of C atoms increases, and the same stability is observed in the adsorption energy. It is suggested that this may be one of the reasons for the low percent of armchair single-wall carbon nanotubes found in the experimental synthesis.     

Raman spectroscopy of free-standing individual semiconducting single-wall carbon nanotubes

The radial breathing modes and tangential modes have been systematically measured on a large number of individual semiconducting single-wall carbon nanotubes (thin bundles) suspended between plots (free-standing single-wall carbon nanotubes). The strong intensity of the Raman spectra ensures the precision of the experimentally determined line shapes and frequencies of these modes. The diameter dependence of the frequencies of the tangential modes was measured. This dependence is discussed in relation with recent calculations. The present data confirm/contradict some previous interpretations.     

Comparative measures of single-wall carbon nanotube dispersion

Model composites of DNA-wrapped single-wall carbon nanotubes in poly(acrylic acid) are used to evaluate metrics of nanotube dispersion. By varying the pH of the precursor solutions, we introduce a controlled deviation from ideal behavior. On the basis of small-angle neutron scattering, changes in near-infrared fluorescence intensity are strongly correlated with dispersion, while optical absorption spectroscopy and resonant Raman scattering are less definitive. Our results represent the first systematic comparison of currently accepted measures of nanotube dispersion.     

水溶性羟基化单壁碳纳米管与人血清白蛋白之间的相互作用研究

利用荧光光谱、UV吸收光谱、同步荧光光谱和透射电子显微镜等技术较为系统地研究了水溶性羟基化单壁碳纳米管与人血清白蛋白(HSA)的相互作用. 实验发现, 这种羟基化单壁碳纳米管可以明显猝灭HSA的内源荧光, 且猝灭效应随碳纳米管浓度增大而增强. 同时, HSA对水溶性羟基化单壁碳纳米管起到一定的分散和稳定作用. 同步荧光光谱表明, 二者之间的相互作用可导致HSA的构象发生变化, HSA的色氨酸残基荧光信号发生2 nm的红移, 表明色氨酸残基周围微环境的极性降低.     

Performance of dye-sensitized solar cells with various carbon nanotube counter electrodes

Double-wall carbon nanotubes (DWCNTs), single-wall carbon nanotubes (SWCNTs), and multi-wall carbon nanotubes (MWCNTs) were investigated as an alternative for platinum in counter-electrodes for dye-sensitized solar cells. The counter-electrodes were prepared on fluorine-doped tin oxide glass substrates by the screen printing technique from pastes of carbon nanotubes and organic binder. The solar cells were assembled from carbon nanotubes counter-electrodes and screen printed anodes made from titanium dioxide. The cells produced with DWCNTs, SWCNTs or MWCNTs have overall conversion efficiencies of 8.0%, 7.6% and 7.1%, respectively. Electrochemical impedance spectroscopy measurements revealed that DWCNTs displayed the highest catalytic activity for the reduction of tri-iodide ions. The large surface area and superior chemical stability of the DWCNTs facilitated the electron-transfer kinetics at the interface between counter-electrode and electrolyte and yielded the lowest transfer resistance, thereby improving the photovoltaic activity. A short-term stability test at moderate conditions confirmed the robustness of solar cells based on the use of DWCNTs, SWCNTs or MWCNTs.

用羟基磷灰石和单壁碳纳米管制备葡萄糖传感器的研究

在滴涂法制得单壁碳纳米管(SWNTs)修饰电极的基础上,采用电化学方法沉积纳米羟基磷灰石(HA)涂层,进而利用分子组装技术将葡萄糖氧化酶(GOD)固定到该电极上,制得的修饰电极的循环伏安测量结果表明,GOD发生了直接的电子传递.GOD-HA-SWNTs/GC修饰电极对不同浓度的葡萄糖呈现两个良好的线性响应范围,有望开发...     

Control of hole opening in single-wall carbon nanotubes and single-wall carbon nanohorns using oxygen

Due to the simplicity of the process, holes in the graphene walls of single-wall carbon nanotubes (SWNTs) and single-wall carbon nanohorns (SWNHs) have often been opened using O2 gas at high temperatures, even though this contaminates the nanotubes with carbonaceous dust (C-dust). To open holes with less C-dust contamination, we found that a slow temperature increase of 1 degrees C/min or less, in air, was effective. We also found that SWNHs having little C-dust could store a large quantity of materials inside the tubes. We infer that the local temperature increase due to the exothermic reaction of combustion may have been suppressed in the slow combustion process, which was effective in reducing the C-dust.     

Electrochemical studies of single-wall carbon nanotubes as nanometer-sized activators in enzyme-catalyzed reaction

Chronoamperometry based on the “controlling-diffusion layer” concept of the convective system was used to assay the activity of lactate dehydrogenase (LDH) on a bare glassy carbon (GC) electrode and a GC electrode modified by a single-wall carbon nanotube (SWNT) film. The effects of lanthanum ion, oxalic acid, and nicotine on the LDH activity were monitored. Analysis of the experimental results revealed that the single-wall carbon nanotubes could markedly increase the activity of LDH. The activation and inhibition were characterized by three quantities: the real initial reaction rate (V₀) and the maximum reaction rate (V_max) of the enzyme-catalyzed reaction and the Michaelis-Menten constant (K_m). Tapping mode atomic force microscopy (AFM) images and the Raman spectra unambiguously demonstrated that the single-wall carbon nanotubes could interact with the enzyme LDH while the SWNT-modified electrode was under the potential control. In this case, the activation of SWNT was attributed to the interaction of SWNTs with the enzyme.     

Analytical applications of nanomaterials in electrogenerated chemiluminescence

This critical review covers the use of carbon nanomaterials (single-wall carbon nanotubes, multi-wall carbon nanotubes, graphene, and carbon quantum dots), semiconductor quantum dots, and composite materials based on the combination of the aforementioned materials, for analytical applications using electrogenerated chemiluminescence. The recent discovery of graphene and related materials, with their optical and electrochemical properties, has made possible new uses of such materials in electrogenerated chemiluminescence for biomedical diagnostic applications. In electrogenerated chemiluminescence, also known as electrochemiluminescence (ECL), electrochemically generated intermediates undergo highly exergonic reactions, producing electronically excited states that emit light. These electron-transfer reactions are sufficiently exergonic to enable the excited states of luminophores, including metal complexes, quantum dots and carbon nanocrystals, to be generated without photoexcitation. In particular, this review focuses on some of the most advanced and recent developments (especially during the last five years, 2010–2014) related to the use of these novel materials and their composites, with particular emphasis on their use in medical diagnostics as ECL immunosensors.     

The calculations of phonon dispersion relations for single-wall carbon armchair and zigzag nanotubes

A 3D single-wall carbon nanotube can be viewed as a 2D graphite sheet rolled into a 3D cylinder. In the study of dispersion relations of carbon nanotubes, the consistent force parameters for 2D graphite sheets have to be modified to include the curvature effect. The present paper reports a series of calculations of phonon dispersion relations for single-wall carbon armchair, zigzag nanotube in which the curvature effect has been properly treated. The symmetry of crystal vibration mode at the centre of Brillouin zone is analyzed based on our numeric results and the structure symmetry of the nanotubes.     

Electrophysical properties of poly(<Emphasis Type="Italic">N</Emphasis>-vinylcarbazole)-carbon nanotubes composite films

The specific features of charge carrier transport in poly(N-vinylcarbazole) films doped with single-wall carbon nanotubes have been investigated. The mobilities of electrons and holes in ITO-polymer composite-Al samples have been determined by the time-of-flight method and by measuring the voltage-current characteristics of steady-state currents. According to the time-of-flight experiments, in the films of a poly(N-vinylcarbazole)-0.26 wt % single-wall carbon nanotubes composite, the drift mobility of electrons lies within (1.2–4.5) × 10^?6 cm²/(V s) and exceeds the mobility of holes by a factor of 5. The shape of the transient current suggests the dispersion character of transport of electrons and holes. With an increase in the concentration of single-wall nanotubes from 0.26 to 0.43 wt %, the conductivity of the composite films increases by two orders of magnitude; that is, the threshold of conductivity percolation has been achieved. A simple model is proposed to describe the transport of charge carriers in the polymer system under study.     

Purification and opening of carbon nanotubes using steam

Purification and opening of carbon nanotubes has been carried out by treatment of as-made single-wall carbon nanotubes (SWNTs) with pure steam at 1 atm pressure. Treated samples have been characterized by high-resolution transmission electron microscopy and IR and Raman spectroscopy. Comparison between the steam purification and the standard nitric acid purification treatment shows that steam is less aggressive toward damage to the tubular nanotube wall structure and forms fewer functional groups.     

Carbon nanotube salts. Arylation of single-wall carbon nanotubes

[reaction: see text] Carbon nanotube salts prepared by treating single-wall carbon nanotubes (SWNTs) with lithium in liquid ammonia react readily with aryl iodides to give SWNTs functionalized by aryl groups.     

Third-order optical susceptibility of single-walled carbon nanotubes

The third-order susceptibility of tetrachloroethane dispersions of capped single-wall carbon nanotubes (SWCNT) has been analyzed by the z-scan technique using a femtosecond laser, and the SWCNT image obtained by atomic force microscopy has been also presented.     

Multiwall carbon nanotubes and their applications

The chemical, electrophysical, magnetic, tribological, and physicomechanical properties of multiwall carbon nanotubes (MWCNTs), as well as the characteristics of new nanocomposites and instruments thereof were discussed. These MWCNTs are produced by unique technology and are free from impurities of other carbon modifications. Advantages of multiwall over single-wall carbon nanotubes were demonstrated for applications in electronic devices and preparation of nanocomposites (as filling agents).     

A comparative study of argon ion irradiated pristine and fluorinated single-wall carbon nanotubes

Effect of Ar(+) ion irradiation on the structure of pristine and fluorinated single-wall carbon nanotubes (SWCNTs) was examined using transmission electron microscopy (TEM), Raman, and x-ray photoelectron spectroscopy (XPS). The TEM analysis revealed retention of tubular structures in both irradiated samples while Raman spectroscopy and XPS data indicated a partial destruction of nanotubes and formation of oxygen-containing groups on the nanotube surface. From similarity of electronic states of carbon in the irradiated pristine and fluorinated SWCNTs observed by XPS, it was suggested that defluorination of nanotubes proceeded with breaking of C-F bonds.     

Molecular beam-controlled nucleation and growth of vertically aligned single-wall carbon nanotube arrays

The main obstacle to widespread application of single-wall carbon nanotubes is the lack of reproducible synthesis methods of pure material. We describe a new growth method for single-wall carbon nanotubes that uses molecular beams of precursor gases that impinge on a heated substrate coated with a catalyst thin film. In this growth environment the gas and the substrate temperature are decoupled and carbon nanotube growth occurs by surface reactions without contribution from homogeneous gas-phase reactions. This controlled reaction environment revealed that SWCNT growth is a complex multicomponent reaction in which not just C, but also H, and O play a critical role. These experiments identified acetylene as a prolific direct building block for carbon network formation that is an order of magnitude more efficient than other small-molecule precursors. The molecular jet experiments show that with optimal catalyst particle size the incidence rate of acetylene molecules plays a critical role in the formation of single-wall carbon nanotubes and dense vertically aligned arrays in which they are the dominant component. The threshold for vertically aligned growth, the growth rate, the diameter, and the number of walls of the carbon nanotubes are systematically correlated with the acetylene incidence rate and the substrate temperature.     

Dispersion of nitric acid-treated SWNTs in organic solvents and solvent mixtures

The dispersion of pristine and nitric acid-treated single-wall carbon nanotubes (SWNTs) has been studied in organic solvents and solvent mixtures using optical absorption, as a function of settling time. The extinction coefficients of both the pristine and acid-treated tubes at 500-nm wavelength was measured to be 25.5 (mg/L)(-1) cm(-1) in various solvents. The dispersibility of nitric acid-treated tubes increased with the solvent's hydrogen-bonding ability and reached 27 mg/L in ethanol and 35 mg/L in water. Nitric acid-treated tubes could also be dispersed in butanol/toluene and xylene/ethanol mixtures, which are known to be poor solvents for the pristine SWNTs.