Helical polycyclic aromatics containing thiophenes: synthesis and properties

A series of planar and non-planar (helical) thiophene-based polycyclic aromatics has been synthesized through the Diels-Alder reaction followed by decarbonylation reactions and FeCl₃ oxidative cyclizations.     

Star-shaped polycyclic aromatics based on oligothiophene-functionalized truxene: synthesis,properties, and facile emissive wavelength tuning

A facile approach to soluble star-shaped oligothiophene-functionalized polycyclic aromatics based on truxene is developed in this Communication. The Suzuki coupling reactions afford the thiophene-containing polycyclic aromatics with long branches (about 2.1 nm length from the heart to the periphery) from truxene precursor with excellent yields. The unsubstituted alpha-positions of thiophene rings allow for efficient halogenation and for further functionalization. The investigation of proton NMR spectra indicates that the hexahexyl groups efficiently prevent the self-association through the arene-arene pi-stacking. Chemical shifts belonging to methylene groups move more upfield than do those of methyl groups. These chemical shift values (about 0.5-0.6 ppm) are quite lower than those of normal methyl and methylene groups. We also prepare a dendritic hyperbranched polymer P1 through FeCl3 mediated oxidative polymerizations. The photophysical properties of all compounds possessing good symmetry are investigated by UV-vis and emission measurement.     

Recognition of critical pairs of polycyclic aromatics on crystalline, liquid-crystalline and isotropic regions of silica-supported polymer in HPLC

Summary The silica-supported comb-shaped polymer (Sil-ODA₁₈) with a “crystalline-to-isotropic” phase transition showed the characteristic behaviors of both polymeric and monomeric ODS phases. This was examined using a SRM 869 test mixture. Furthermore, Sil-ODA₁₈ exhibited a specific selectivity towards the critical pairs of polycyclic aromatic hydrocarbons (PAHs), such as acenaphthene and fluorene, or benz(a)anthracene and chrysene, or benzo(ghi)perylene, indeno(1,2,3-cd)pyrene and dibenz(a,h)anthracene. The separation of these solutes was controlled by selecting temperature and solvent systems. The selectivity on Sil-ODA₁₈ was also compared with a conventional ODS (octadecylsilyl silica gel) column. The selectivity on a Sil-ODA₁₈ matrix is attributable to an orientation change of the long-chain alkyl substituents on the surface of the silica base material on transition from crystalline to isotropic state.     

基质标准校正-气相色谱-质谱法同时检测地下水中有机氯农药和多环芳烃

建立了同时检测水中17种有机氯农药和16种多环芳烃的气相色谱质谱分析方法。采用C18固相萃取技术萃取水中的有机氯农药和多环芳烃,分析了产生基质效应的主要原因,对不同基质样品进行了回收率比对试验。结果表明方法检出限(LOD)均低于2.0 ng/L,方法所评估的定量限(LOQ)均低于20.0 ng/L,回收率为70%~130%。     

Facile synthesis and characterization of a novel thiophene-fused polycyclic aromatics based on pyrene

A novel large thiophene-fused polycyclic aromatics 1 based on pyrene 5 has been synthesized,and its structure was confirmed by ¹H NMR,¹³C NMR,MS,UV -vis and elemental analysis.The key steps of the synthesis involved the Stille cross-coupling reaction and followed by selectiveβ-βoxidative cyclization of pendant thienyl rings by FeCl₃ under mild conditions.     

Characterisation of eco-friendly processing aids for rubber compound: Part II

According to the KEMI report, products with polycyclic aromatic compounds, PCA, levels exceeding 3% by weight must be labelled. The report pointed out that worn tyre tread material was being spread on the roadsides, introducing high amounts of PCA into the environment. PCA is having toxic effects on aquatic organisms. Polyaromatic-hydrocarbon-rich extender oils are to be banned by December 2009, which gives rise to challenges for the oil and rubber industries. In the present work, 10 types of naturally occurring oils and six types of petroleum-based oils were characterised in natural-rubber-based truck tyre tread cap compound. Compounds made with some of the naturally occurring oils showed better mechanical and dynamic mechanical properties.     

Single-molecule nanosized polycyclic aromatics with alternant five- and six-membered rings: synthesis and optical properties

[structure: see text] A synthetic protocol for a novel family of symmetric polycyclic aromatics with a benzene or cyclooctatetraene (COT) ring as the core and alternant fused benzene and cyclopentadiene rings as branches has been developed. The TiCl(4)-promoted cyclizations construct both planar trimers and tubelike tetramers via the "in situ" generation of the benzene or COT skeleton. The structures of 6b, 7a, 7b, and 10 have been characterized by (1)H and (13)C NMR spectra and MALDI-TOF mass spectroscopy. These polycyclic aromatics also exhibit interesting optical properties.     

Estimation of physical properties of transition metals based on a configuration model of solids

A new empirical formula for estimation of the entropyS°₂₉₈ of transition metals is suggested. On the basis of this formula some equations that enable calculation of other physical properties, for example density and molar heat capacity, have been derived.Dedicated to Prof. Dr.Kurt L. Komarek on the occasion of his 60th birthday.     

Structure-retention studies on the inclusion complex formation of some polycyclic aromatic hydrocarbons with β-cyclodextrin

Summary The retention behaviour of a group of polycyclic aromatic hydrocarbons having nearly equal ionization potentials but different molecular polarizability values was investigated using reversed-phase HPLC. Methanol-water binary systems containing -cyclodextrin were applied as the mobile phase. The relationships between the capacity factors, molecular polarizabilities and the shape parameter of solute molecules are discussed.     

Influence of amine-grafted multi-walled carbon nanotubes on physical and rheological properties of PMMA-based nanocomposites

In this work, poly(methyl methacrylate) (PMMA) was grafted onto amine treated multi-walled carbon nanotubes (NH-MWNTs) and the physical and rheological properties of the NH-MWNTs–g-PMMA nanocomposites were investigated. The graft reaction of NH-MWNTs and the PMMA matrix was confirmed from the change of the N_1S peaks, including those of amine oxygen and amide oxygen, by X-ray photoelectron spectroscopy (XPS). The thermal and mechanical properties of the NH-MWNT–g-PMMA nanocomposites were enhanced by the graft reaction between NH-MWNTs and PMMA matrix. In addition, the viscosity of the nanocomposites was increased with the addition of NH-MWNTs. Storage (G′) and loss modulus (G″) were significantly increased by increase in the NH-MWNT content compared to acid-treated MWNTs/PMMA nanocomposites. This increase was attributed to the strong interaction by the grafting reaction between NH-MWNTs and the PMMA matrix.     

Comparative studies for the effect of intercalating agent on the physical properties of epoxy resin-clay based nanocomposite materials

In this study, a series of comparative studies for the effect of intercalating agent on the physical properties of the epoxy resin-clay based nanocomposite materials were performed. First, the quaternary alkylphosphonium and alkylammonium salt were both used as the intercalating agents separately for the preparation of organophilic clay through the cationic exchange reactions with Na⁺-montmorillonite clay. Subsequently, the organophilic clay was blent into the epoxy resin through in-situ thermal ring-opening polymerizations to prepare a series of polymer-clay nanocomposite (PCN) materials. The as-synthesized PCN materials were subsequently characterized by Fourier-Transformation infrared (FTIR) spectroscopy, wide-angle powder X-ray diffraction (WXRD), and transmission electron microscopy (TEM).It should be noted that the quaternary alkylphosphonium salt (Φ₃P⁺-C₁₂)-modified clay was found to show better dispersion capability than that of quaternary alkylammonium salt (Me₃N⁺-C₁₆)-modified clay existed in the polymer matrix based on the studies of WXRD and TEM. The better dispersion of (Φ₃P⁺-C₁₂)-modified clay in epoxy resin was found to lead more effectively enhanced physical property such as corrosion protection, gas barrier, mechanical strength, thermal stability, and flame retardant properties of polymers than that of (Me₃N⁺-C₁₆)-modified clay, in the form of coating and membrane, based on the measurements of a series of electrochemical corrosion parameters, gas permeability analysis (GPA), dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and limiting oxygen index (LOI), respectively. Effect of material composition on the physical properties of as-prepared materials was also investigated.     

Synthesis and optical and electrochemical properties of polycyclic aromatic compounds based on bis(benzothiophene)-fused fluorene

Novel polycyclic aromatic compounds (FBTPhO3 and FBTPhO4), which are based on bis(benzothiophene)-fused fluorene functionalized with oligo(ethylene glycol)-substituted phenyl, were synthesized through an intramolecular electrophilic cyclizing reaction. Thermal measurements revealed their excellent thermal stability and amorphous state. Photoluminescence spectra suggested that they both show deep blue light emission. Cyclic voltammetry tests exhibited that the ionization potentials of FBTPhO3 and FBTPhO4 are 5.67 and 5.68 eV, respectively, implying their good inoxidizability. These compounds may be promising building blocks for high-performance optoelectronic functional materials.     

Influence of gel content on the physical properties of unfilled and carbon black filled natural rubber vulcanizates

Recently, gel content has been considered as a standard property for evaluating commercial grade natural rubber (NR). In this study, NR containing various amounts of gel was prepared by accelerated storage hardening as a model to clarify the influence of gel content on the physical properties of both unfilled and carbon black filled vulcanizates. Furthermore, the NR samples were investigated to determine the effect of gel fraction on Mooney viscosity and the structure of the gel after mastication. The results revealed that Mooney viscosity was related to the percentage of gel fraction that has been proven to be the result of interactions between proteins and phospholipids at chain ends. After mastication, although the gel fraction of NR can be decomposed to ∼0% w/w, the interactions of proteins and phospholipids at the chain ends still existed, corresponding to the gel content of the raw rubber. In the case of unfilled vulcanizates, the gel content showed no effect on cure characteristics, crosslink density and ultimate tensile strength, whereas the upturn of stress occurred at a smaller strain when the gel content increased. However, in the case of carbon black filled vulcanizates, the gel content played a dominant role in the carbon black dispersion, which was poorer when gel content increased, contributing to a decrease of crosslink density and ultimate tensile strength.     

医用聚丙烯酰胺水凝胶理化性能测试

测试了医用聚丙烯酰胺水凝胶产品的pH值、折射率、重金属含量、红外光谱、化学热稳定性和丙烯酰胺单体残留量等主要理化性能，重点研究了样品中残留单体丙烯酰胺的高效液相色谱分析法。     

Extended mesoionic systems: synthesis and characterization of monocyclic, polycyclic and macrocyclic pyrimidinium-olate derivatives and their photochemical behavior

Mesoionic pyrimidinium-olate derivatives have been known to undergo photoreactions upon irradiation with UV light to form bis(beta-lactame) structures for about two decades. Here, new mono-, poly- and macrocyclic mesoions were prepared and their photochemical rearrangement behavior was investigated. The synthesized compounds were characterized by NMR, IR, UV/Vis spectroscopy, elemental analysis and mass spectrometry. The extension of the aromatic core leads to a significant red-shift of the absorption maximum from ∼380 to ∼430 nm, indicating a strong electronic coupling of the mesoionic base chromophore with the annellated aromatic subunit. The rigidity of the extended aromatic system prevents polycyclic mesoions from shifting to their bis(beta-lactame) isomers, while the alkyl bridge of the 16-membered macrocycle in an ansa-mesoion does not inhibit photochemical rearrangement.     

A facile synthesis of cajaninstilbene acid and its derivatives

A facile synthesis of cajaninstilbene and its derivatives by using a building block has been developed.     

Sulphur-containing polymers: Synthesis and thermal properties of novel polyesters based on dithiotriethylene glycol

Poly(dithiotriethylene terephthalate) (PSSTET), poly(dithiotriethylene adipate) (PSSTEA), poly(triethylene terephthalate) (PTET) and poly(triethylene adipate) (PTEA), these two last for comparison, were synthesized and characterized in terms of chemical structure and molecular weight. The thermal behaviour was examined by thermogravimetric analysis and differential scanning calorimetry. All the polymers showed a good thermal stability, even though lower for the sulphur-containing polyesters. At room temperature they appeared as semicrystalline materials, except PTEA, which was an oil; the effect of substitution of ether oxygen atoms with sulphur ones was found to be a lowering in the T_g value, an increment of the melting temperature and an increase of the crystallization rate. The results were explained as due to the presence of flexible C-S-C bonds in the polymeric chain. Lastly, the absence of a rigid-amorphous phase was evidenced in PSSTET and PTET.     

Novel thermally stable polyimides based on flexible diamine: synthesis, characterization, and properties

A novel diamine with built-in sulfone, ether, and amide structure was prepared via three-step reactions. Nucleophilic reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide led to preparation of N-(4-hydroxy phenyl)-4-nitrobenzamide (HPNB). The nitro group of this compound was reduced with hydrazine and Pd/C to afford 4-amino-N-(4-hydroxy phenyl)benzamide (AHPB). Two moles of AHPB were reacted with bis-(4-chloro phenyl)sulfone to provide a novel sulfone ether amide diamine (SEAD). All the prepared compounds were characterized by common spectroscopic methods. The prepared diamine (SEAD) used to prepare related polyimides by reaction with different aromatic dianhydrides. The obtained poly(sulfone ether amide imide)s were characterized and their properties were studied.     

A phosphate-based epoxy resin for flame retardance: synthesis, characterization, and cure properties

A phosphorus-containing oligomer, bis(3-hydroxyphenyl) phenyl phosphate (BHPP), was synthesized through the reaction of phenyl dichlorophosphate and 1,3-dihydroxybenzene, and characterized by elemental analysis, Fourier transform IR spectroscopy, and ¹H NMR and ³¹P NMR spectroscopy. Consequently, the phosphate-based epoxy resins with a phosphorus content of 1 and 2 wt % were prepared via the reaction of diglycidyl ether of bisphenol-A with BHPP and bisphenol-A, and were confirmed with Fourier transform IR spectroscopy and gel permeation chromatography. Phenolic melamine, Novolak, and dicyanodiamide were used as curing agents to prepare the thermoset resins with the control and the phosphate-based epoxy resins. Thermal properties and thermal degradation behavior of these thermoset resins were investigated by using differential scanning calorimetry and thermogravimetric analysis. The thermoset resins cured with phenolic melamine exhibited higher glass-transition temperatures than the other cured resins owing to the high rigidity of their molecular chain. Thermogravimetric analysis studies demonstrated that the decomposition temperatures of the thermoset resins cured with Novolak were higher than those of the others. A synergistic effect from the combination of the phosphate-based epoxy resin and the nitrogen-containing curing agent can result in a great improvement of the flame retardance for their thermoset resins.