Structural and luminescent properties of silicon nanoparticles incorporated into zirconia matrix

An impact of mechanical stresses on structural and photoluminescent properties of Si nanoparticles (NPs) incorporated into the zirconia thin films is reported. The stresses are found to be responsible for important structural modifications of the NPs. The zirconia matrix doped with the NPs exhibits bright red photoluminescence (PL) at room temperature due to efficient quantum confinement of the photogenerated carriers in the nanoscale Si particles. Spectral position of the PL picks depends on: mean dimension of the NPs, their concentration, stress induced deformation and order degree of the near-surface region. In general, zirconia matrix appears as a robust and reliable host media for Si NPs.     

Liposome encapsulation of fluorescent nanoparticles: Quantum dots and silica nanoparticles

Quantum dots (QDs) and silica nanoparticles (SNs) are relatively new classes of fluorescent probes that overcome the limitations encountered by organic fluorophores in bioassay and biological imaging applications. We encapsulated QDs and SNs in liposomes and separated nanoparticle-loaded liposomes from unencapsulated nanoparticles by size exclusion chromatography. Fluorescence correlation spectroscopy was used to measure the average number of nanoparticles inside each liposome. Results indicated that nanoparticle-loaded liposomes were formed and separated from unencapsulated nanoparticles by using a Sepharose gel. As expected, fluorescence self-quenching of nanoparticles inside liposomes was not observed. Each liposome encapsulated an average of three QDs. These studies demonstrated that nanoparticles could be successfully encapsulated into liposomes and provided a methodology to quantify the number of nanoparticles inside each liposome by fluorescence correlation spectroscopy.     

A novel approach towards the production of luminescent silicon nanoparticles: sputtering, gas aggregation and co-deposition with H2O

Silicon clusters were produced by sputtering of a p-doped Si target and aggregation of the Si atoms in an argon gas atmosphere. The clusters were deposited in ultra high vacuum onto either (i) carbon transmission electron microscope (TEM) grids or (ii) a liquid nitrogen cooled finger on which a thick layer of ice was co-deposited during the exposure to the cluster beam. The ice layer containing the clusters was melted to form a liquid sample which showed luminescence peaking at 421 nm when excited at 307.5 nm. The luminescence is attributed to electron-hole recombination in oxygen deficient defects in the Si–SiO₂ interface region. TEM images of the nanoparticles deposited on the carbon grids show spherical particles with diameters ranging from 4 to 50 nm, flake-like structures or nanotube-like shapes. Grids with higher deposited densities reveal clusters that are agglomerated into chains, TEM images of the dried liquid sample show a network of fibres indicating that growth into fibres is further promoted when the clusters gain mobility in the melted ice.     

Preparation and characterization of a novel luminescent nanoparticles

In this paper, a new kind of fluorescent nanomaterial with morin modified alumina core and silica shell was prepared. Samples were characterized by transmission electron microscope (TEM), X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), photoluminescent (PL) spectroscopy and fluorescence microscope. TEM results indicated that this material could be synthesized in nanometer range. PL spectra suggested that this new synthesized material was photostable and it showed nearly no dye leakage. This was because the dye molecules could form stable complex with the reactive aluminum cations on the surfaces of the alumina particles. The excitation and emission maxima of this new luminescent material were located at 420 and 493 nm, respectively. This new kind of luminescent nanomaterial was prepared by morin, AlCl₃ and tetraethyl orthosilicate, which was very important for the large-scale and economic preparation luminescent nanoparticles because these precursors were inexpensive and the preparation process was convenient.     

Laser pyrolysis synthesis and characterization of luminescent silicon nanocrystals

Quantum dots of silicon are very attractive materials due to their photoluminescence (PL) emission that can be very strong at room temperature in the visible range under UV illumination. Weighable batches are demanded for several applications in opto-electronic, photovoltaic, medicine, and so on. Laser pyrolysis of silane in a flow reactor is an efficient method to synthesize silicon nanocrystals, but up to now the production rate for the smallest particles was very low. We present here results of a work aimed to overcome this limitation. Optimization of the laser pyrolysis process has been performed through an elaborate study of the synthesis parameters. Weighable batches of very small silicon particles were obtained in a controlled and reproducible way, with production rate in the 0.1–1 g/h. High-resolution electron microscopy and specific surface measurements show that the particles were true silicon nanocrystals in the 4–9 nm range. We have then studied their PL properties. For this purpose, we have paid a particular attention to the surface passivation, an essential step to obtain efficient PL. Various ways were explored: natural oxidation under air and dispersion in liquids. We show that after natural oxidation, the PL properties are, as expected, in agreement with the quantum confinement model. Strong PL is also obtained by dispersion in solvents, but the interpretation is less straightforward in this case, and as discussed in the paper, needs further investigation.     

Preparation of cytocompatible luminescent and magnetic nanohybrids based on ZnO, Zn0.95Ni0.05O and core@shell ZnO@Fe2O3 polymer grafted nanoparticles for biomedical imaging

ZnO, Zn_0.95Ni_0.05O and core@shell ZnO@??-Fe₂O₃ nanoparticles (NPs) have been prepared by forced hydrolysis in polyol medium and then coated via the ??grafting from?? approach with poly(sodium-4-styrenesulfonate) and poly(sodium-4-styrenesulfonate?Cco?Csodium methacrylate) in the case of ZnO. The surface-initiated atom transfer radical polymerization occurred from the surface-functionalized NPs with ??-bromoisobutyric acid as initiator. The polymer chains were grown from the surface to yield hybrid NPs with a 1?C3-nm thick organic shell. FT-IR, TGA and electron microscopy evidenced the presence of a polymer layer on the surface of NPs. Magnetic and optical properties of bare and coated NPs have been measured. Eventually, the weak cytotoxicity of coated NPs on human endothelial cell allows considering their potentialities as new tools for nanomedicine and biomedical imaging.     

Optimization of ultrasonic-assisted approach for synthesizing a highly stable biocompatible bismuth-coated iron oxide nanoparticles using a face-centered central composite design

The incorporation of additional functional groups such as bismuth nanoparticles (Bi NPs) into magnetite nanoparticles (Fe₃O₄ NPs) is critical for their properties modification, stabilization, and multi-functionalization in biomedical applications. In this work, ultrasound has rapidly modified iron oxide (Fe₃O₄) NPs via incorporating their surface through coating with Bi NPs, creating unique Fe₃O₄@Bi composite NPs. The Fe₃O₄@Bi nanocomposites were synthesized and statistically optimized using an ultrasonic probe and response surface methodology (RSM). A face-centered central composite design (FCCD) investigated the effect of preparation settings on the stability, size, and size distribution of the nanocomposite. Based on the numerical desirability function, the optimized preparation parameters that influenced the responses were determined to be 40 ml, 5 ml, and 12 min for Bi concentration, sodium borohydride (SBH) concentration, and sonication time, respectively. It was found that the sonication time was the most influential factor in determining the responses. The predicted values for the zeta potential, hydrodynamic size, and polydispersity index (PDI) at the highest desirability solution (100%) were −45 mV, 122 nm, and 0.257, while their experimental values at the optimal preparation conditions were −47.1 mV, 125 nm, and 0.281, respectively. Dynamic light scattering (DLS) result shows that the ultrasound efficiently stabilized and functionalized Fe₃O₄NPs following modification to Fe₃O₄@Bi NPs, improved the zeta potential value from –33.5 to −47.1 mV, but increased the hydrodynamic size from 98 to 125 nm. Energy dispersive spectroscopy (EDX) validated the elemental compositions and Fourier transform infrared spectroscopy (FTIR) confirmed the presence of Sumac (Rhus coriaria) compounds in the composition of the nanocomposites. The stability and biocompatibility of Fe₃O₄@Bi NPs were improved by using the extract solution of the Sumac edible plant. Other physicochemical results revealed that Fe₃O₄NPs and Fe₃O₄@Bi NPs were crystalline, semi-spherical, and monodisperse with average particle sizes of 11.7 nm and 19.5 nm, while their saturation magnetization (Ms) values were found to be 132.33 emu/g and 92.192 emu/g, respectively. In vitro cytotoxicity of Fe₃O₄@Bi NPs on the HEK-293 cells was dose- and time-dependent. Based on our findings, the sonochemical approach efficiently produced (and RSM accurately optimized) an extremely stable, homogeneous, and biocompatible Fe₃O₄@Bi NPs with multifunctional potential for various biomedical applications.     

Laser synthesis of aluminium nanoparticles in biocompatible polymer solutions

Pulsed laser ablation of Aluminium (Al) in pure water rapidly forms a thin alumina (Al₂O₃) layer which drastically modifies surface plasmon resonance (SPR) absorption characteristics in deep-UV region. Initially, pure aluminium nanoparticles (NPs) are generated in water without any stabilizers or surfactants at low laser fluence which gradually transform to stable Al-Al₂O₃ core-shell nanostructure with increasing either residency time or fluence. The role of laser wavelength and fluence on the SPR properties and oxidation characteristics of Al NPs has been investigated in detail. We also present a one-step in situ synthesis of oxide-free stable Al NPs in biocompatible polymer solutions using laser ablation in liquid method. We have used nonionic polymers (PVP, PVA and PEG) and anionic surfactant (SDS) stabilizer to suppress the Al₂O₃ formation and studied the effect of polymer functional group, polymeric chain length, polymer concentration and anionic surfactant on the incipient embryonic aluminium particles and their sizes. The different functional groups of polymers resulted in different oxidation states of Al. PVP and PVA polymers resulted in pure Al NPs; however, PEG and SDS resulted in alumina-modified Al NPs. The Al nanoparticles capped with PVP, PVA, and PEG show a good correlation between nanoparticle stability and monomeric length of the polymer chain.     

Synthesis of Mn doped ZnO nanoparticles with biocompatible capping

Free standing nanoparticles of ZnO doped with transition metal ion Mn have been prepared by solid state reaction method at 500 °C. X-ray diffraction (XRD) analysis confirmed high quality monophasic wurtzite hexagonal structure with particle size of 50 nm and no signature of dopant as separate phase. Incorporation of Mn has been confirmed with EDS. Bio-inorganic interface was created by capping the nanoparticles with heteromultifunctional organic stabilizer mercaptosuccinic acid (MSA). The surface morphological studies by scanning electron microscopy (SEM) showed formation of spherical particles and the nanoballs grow in size uniformly with MSA capping. MSA capping has been confirmed with thermo gravimetric analysis (TGA) and FTIR. Photoluminescence (PL) studies show that the ZnO:Mn²⁺ particles are excitable by blue light and emits in orange and red. Occurrence of room temperature ferromagnetism in Mn doped ZnO makes such biocompatible luminescent magnetic nanoparticles very promising material.     

Synthesis, characterisation and functionalisation of luminescent silica nanoparticles

The synthesis of highly monodispersed, homogeneous and stable luminescent silica nanoparticles, synthesized using a process based on the Stöber method is reported here. These particles have been functionalised with the ruthenium and europium complexes: bis (2,2??-bipyridine)-(5-aminophenanthroline) Ru bis (hexafluorophosphate), abbreviated to (Ru(bpy)₂(phen-5-NH₂)(PF₆)), and tris (dibenzoylmethane)-mono (5-aminophenanthroline) europium(III), abbreviated to (Eu:TDMAP). Both dyes have a free amino group available, facilitating the covalent conjugation of the dyes inside the silica matrix. Due to the covalent bond between the dyes and the silica, no dye leaching or nanoparticle diameter modification was observed. The generic and versatile nature of the synthesis process was demonstrated via the synthesis of both europium and ruthenium-functionalised nanoparticles. Following this, the main emphasis of the study was the characterisation of the luminescence of the ruthenium-functionalised silica nanoparticles, in particular, as a function of surface carboxyl or amino group functionalisation. It was demonstrated that the luminescence of the ruthenium dye is highly affected by the ionic environment at the surface of the nanoparticle, and that these effects can be counteracted by encapsulating the ruthenium-functionalised nanoparticles in a plain 15 nm silica layer. Moreover, the ruthenium-functionalised silica nanoparticles showed high relative brightness compared to the free dye in solution and efficient functionalisation with amino or carboxyl groups. Due to their ease of fabrication and attractive characteristics, the ruthenium-functionalised silica nanoparticles described here have the potential to be highly desirable fluorescent labels, particularly, for biological applications.     

Ultrasonic investigation of magnetic nanoparticles suspension with PEG biocompatible coating

Water suspension of nanoparticles was studied by ultrasound spectroscopy. Nanoparticles have a core-shell structure with magnetic core Fe₃O₄ and surfactant shells. The surface of magnetic particles was coated with oleate sodium as the primary layer and polyethylene glycol as the secondary layer. The acoustic properties of suspensions, such as velocity and attenuation of ultrasonic waves, have been measured. From experimental data mechanical properties have been determined. Adiabatic compressibility of nanoparticles suspension decreased with increase of temperature. The changes of ultrasonic wave attenuation under the influence of the external magnetic field, show that magnetic liquids with high concentration of magnetic material (despite two surfactant shells) show tendency to aggregate.     

Caveolae-mediated endocytosis of biocompatible gold nanoparticles in living Hela cells

Efficient intracellular delivery of gold nanoparticles (AuNPs) and unraveling the mechanism underlying the intracellular delivery are essential for advancing the applications of AuNPs toward in vivo imaging and therapeutic interventions. We employed fluorescence microscopy to investigate the internalization mechanism of small-size AuNPs by living Hela cells. Herein, we found that the caveolae-mediated endocytosis was the dominant pathway for the intracellular delivery of small-size AuNPs. The intracellular delivery was suppressed when we depleted the cholesterol with methyl-β-cyclodextrin (MβCD); in contrast, the sucrose that disrupts the formation of clathrin-mediated endocytosis did not block the endocytosis of AuNPs. Meanwhile, we examined the intracellular localization of AuNPs in endocytic vesicles by fluorescent colocalization. This work would provide a potential technique to study the intracellular delivery of small-size nanoparticles for biomedical applications.     

Color-tunable magnetic and luminescent hybrid nanoparticles: Synthesis, optical and magnetic properties

A facile method for synthesizing color-tunable magnetic and luminescent hybrid bifunctional nanoparticles is presented. A series of CdSe/ZnS core-shell quantum dots (QDs) with different sizes were successfully fabricated and self-assembled to Fe₃O₄ magnetic nanoparticles (MNP), which were subsequently coated with a polyethyleneimine (PEI) layer to prevent large aggregates. The hydrophobic QDs capped with trioctylphosphine oxide (TOPO) formed a coating surrounding MNP, and were transferred into hydrophilic phase by PEI with high efficiency. The samples were characterized by TEM, FT-IR, XRD, EDS, UV-vis spectrophotometer, fluorescent spectrophotometer and PPMS. Results show that the original properties of the nanoparticles were well-preserved in the hybrid structure. All MNP-QDs hybrid nanoparticles showed paramagnetic behavior and the nanocomposites were still highly luminescent with no shift in the PL peak position.     

Raman properties of silicon nanoparticles

The Raman spectra of silicon nanoparticles in the size range between d=3.5– have been studied experimentally. Scattering processes up to second order are being observed. The experimental results are analyzed in the framework of the phonon confinement model. While this model describes qualitatively the observations for first-order scattering processes, it is not applicable for scattering processes of higher order. From the analysis of second-order scattering, we determine a redshift of the TO phonon at the X and L points.     

Physicotechnological principles of the development of biocompatible magnetic nanoparticles for medicine

Nanodispersive powder of a zinc-substituted magnetite was developed. Functional characteristics (biocompatibility, dispersity, magnetic state) allow us to recommend it for approbation in medical and biological applications. The nature of the investigated field dependencies of magnetization indicates that for particles of 3–13 nm, a superparamagnetic state is realized at room temperature, reflecting the specificity of the small particles’ magnetism.     

Preparation and surface encapsulation of hollow TiO nanoparticles for electrophoretic displays

Hollow black TiO nanosparticles were obtained via deposition of inorganic coating on the surface of hollow core-shell polymer latex with Ti(OBu)₄ as precursor and subsequent calcination in ammonia gas. Hollow TiO particles were characterized by scanning electron microscope, transmission electronic microscopy, X-ray diffraction, and thermogravimetric analysis. Encapsulation of TiO via dispersion polymerization was promoved by pretreating the pigments with 3-(trimethoxysilyl) propyl methacrylate, making it possible to prepare hollow TiO-polymer particles. When St and DVB were used as polymerization monomer, hollow TiO-polymer core-shell particles came into being via dispersion polymerization, and the lipophilic degree is 28.57%. Glutin-arabic gum microcapsules containing TiO-polymer particles electrophoretic liquid were prepared using via complex coacervation. It was founded that hollow TiO-polymer particles had enough electrophoretic mobility after coating with polymer.     

嵌入La和Gd原子的Si24笼团簇的稳定性

用梯度修正自旋极化密度泛函(DFT)电子结构计算,研究了具有Th和D2d对称性包裹La和Gd原子的Si24富勒烯的稳定性.结果表明Gd@Si24具有很高的磁性而La@Si24的磁性完全猝灭.这些结果有可能导致Si基富勒烯团簇新的结构类型.