Synergistic N-Heterocyclic Carbene/Palladium-Catalyzed Umpolung 1,4-Addition of Aryl Iodides to Enals

An umpolung 1,4-addition of aryl iodides to enals promoted by cooperative (terpy)Pd/NHC catalysis was developed that generates various bioactive β,β-diaryl propanoate derivatives. This system is not only the first reported palladium-catalyzed arylation of NHC-bound homoenolates but also expands the scope of NHC-induced umpolung transformations. A diverse array of functional groups such as esters, nitriles, alcohols, and heterocycles are tolerated under the mild conditions. This method also circumvents the use of moisture-sensitive organometallic reagents.     

β-Lactam derivatives as enzyme inhibitors: halogenated β-lactams and related compounds

Different modifications of the imine – acyl chloride reaction were used for the synthesis of 3-mono- and 3,3-dihalogenated 1,4-diaryl substituted β-lactams. Furthermore, these β-lactams were modified by halogen substitution either at the aryl at position 1 or at the aryl substituent at position 4, or at both positions. The influence of the halogen atoms on the reactivity of the β-lactam ring, visible by the carbonyl frequence in their IR spectra, was studied. A selection of compounds was tested as inhibitors of the serin protease porcine pancreatic elastase. No simple correlation between IR frequence and biological activity was found. Finally, the base induced rearrangement of N-benzyl β-lactams was used for the synthesis of 4,5-diaryl substituted pyrrolidinones. Correspondence: Hans-Hartwig Otto, Department of Pharmaceutical/Medicinal Chemistry (PMC), Institute of Pharmacy, Ernst-Moritz-Arndt-University, 17487 Greifswald, Germany.     

A new facile approach to the synthesis of 3-methylthio-substituted furans, pyrroles, thiophenes, and related derivatives

2-(methylthio)-1,4-diaryl-2-butene-1,4-dione (3) are prepared from readily available aryl methyl ketones in the presence of copper(II) oxide, iodine, and dimethyl sulfoxide. The success of the cross-coupling reaction of 4-chloroacetophenone with 2-acetylthiophene confirms a proposed self-sorting tandem reaction mechanism. Both Z- and E-isomers of compound 3 are readily converted into the corresponding 3-methylthio 2,5-diaryl furan 7 in good yield through a domino process involving the reduction of the double bond followed by the Paal-Knorr furan synthesis. Meanwhile, 4-bromo-3-methylthio 2,5-diaryl furan 10 is obtained either by the treatment of furan 7 with molecular bromine or by the treatment of diketone 3 with 30% hydrogen bromide in acetic acid solution in one pot. Removal of the methylthio group is accomplished by the treatment of 7 with Raney Ni in ethanol, which affords the diaryl-substituted furan 11 in excellent isolated yield. Selective reduction of the double bond of compound 3 leads to the formation of the saturated 1,4-diketone 13, which is easily converted to the corresponding 3-methylthio-2,5-diaryl-substituted pyrrole 14 and thiophene 15 via the Paal-Knorr cyclization reaction.     

Palladium-Catalyzed Benzylic C(sp3)−H Carbonylative Arylation with Aryl Bromides

A novel, selective and high-yielding palladium-catalyzed carbonylative arylation of a variety of weakly acidic (pK_a 25–35 in DMSO) benzylic and heterobenzylic C(sp³)−H bonds with aryl bromides has been achieved. This system is applicable to a range of pro-nucleophiles for access to sterically and electronically diverse α-aryl or α,α-diaryl ketones, which are ubiquitous substructures in biologically active compounds. The Josiphos SL-J001-1-based palladium catalyst was identified as the most efficient and selective, enabling carbonylative arylation with aryl bromides under 1 atm CO to provide the ketone products without the formation of direct coupling byproducts. Additionally, (Josiphos)Pd(CO)₂ was identified as the catalyst resting state. A kinetic study suggests that the oxidative addition of aryl bromides is the turnover-limiting step. Key catalytic intermediates were also isolated.     

Expeditious synthesis of C2- or N4-aryl-1,4-benzothiazin-3-one via orthogonal Pd-catalyzed C-arylation and Cu-catalyzed N-arylation

Direct, chemo-specific arylation at C-2 or N-4 of 1,4-benzothiazin-3-one with aryl halides, based on Pd or Cu catalyst system, respectively, provided easy entry to arylated derivatives, a class of molecules not easily accessible via existing methods. Under Pd-catalysis conditions with LiHMDS as the base, N-arylation of 1,4-benzothiazin-3-one was inhibited leading to Cα-arylation of a secondary amide without the need for protection and de-protection of more acidic amido NH.     

Nickel-Catalyzed Chain-Walking Cross-Electrophile Coupling of Alkyl and Aryl Halides and Olefin Hydroarylation Enabled by Electrochemical Reduction

The first electrochemical approach for nickel-catalyzed cross-electrophile coupling was developed. This method provides a novel route to 1,1-diarylalkane derivatives from simple and readily available alkyl and aryl halides in good yields and excellent regioselectivity under mild conditions. The procedure shows good tolerance for a broad variety of functional groups and both primary and secondary alkyl halides can be used. Furthermore, the reaction was successfully scaled up to the multigram scale, thus indicating potential for industrial application. Mechanistic investigation suggested the formation of a nickel hydride in the electroreductive chain-walking arylation, which led to the development of a new nickel-catalyzed hydroarylation of styrenes to provide a series of 1,1-diaryl alkanes in good yields under mild reaction conditions.     

Highly regioselective internal heck arylation of hydroxyalkyl vinyl ethers by aryl halides in water

Highly regioselective and fast Pd(0)-catalyzed internal alpha-arylation of ethylene glycol vinyl ether with aryl halides was shown to be possible in water without the need for any halide scavengers or ionic liquid additives. This presents, to our knowledge, the first case of water being utilized in the selective arylation of electron-rich olefins. Resulting alpha-products were hydrolyzed and isolated as corresponding acetophenones in good to excellent yields when using aryl bromides and with good to moderate yields in the case of aryl iodides. Microwave irradiation was shown to be beneficial in activation of aryl chlorides toward the internal Heck arylation. The scope of the protocol was further increased to include different hydroxyalkyl vinyl ethers, these all giving selectively only branched alpha-products. Finally, the active role of the hydroxy group in directing the regioselectivity toward internal arylation of electron-rich olefins, even in nonpolar toluene, was revealed.     

Palladium-Catalyzed C-H Bond Functionalization of Benzo[1,2-b : 4,5-b′]dithiophene-4,8-dione: A One Step Access to 2-Arylbenzo[1,2-b : 4,5-b′]dithiophene-4,8-diones

The reactivity of benzo[1,2-b : 4,5-b′]dithiophene-4,8-dione in Pd-catalyzed C−H arylation was investigated. Using aryl bromides as aryl source in the presence of carbonate bases in 1,4-dioxane, the mono-C2-arylated benzo[1,2-b : 4,5-b′]dithiophene-4,8-diones were regioselectively obtained. This procedure allowed to introduce both electron-rich and electron-poor aryl substituents on the benzo[1,2-b : 4,5-b′]dithiophene-4,8-dione unit. These conditions were also effective for the coupling with 1-bromonaphthalene, 9-bromophenanthrene as well as aryl bromides bearing synthetically useful nitrile, chloro and methoxy substituents. The photophysical properties of representative arylated compounds have been performed by joint experimental and theoretical studies.     

Palladium‐Catalyzed Zinc‐Amide‐Mediated CH Arylation of Fluoroarenes and Heteroarenes with Aryl Sulfides

C?H arylation of polyfluoroarenes and heteroarenes with aryl sulfides proceeds smoothly with the aid of a palladium–N‐heterocyclic carbene catalyst. A bulky zinc amide, TMPZnCl ? LiCl, plays a key role as an effective base to generate the corresponding arylzinc species in situ. This arylation protocol is practically much easier to perform than our previous method, which necessitates preparation of the arylzinc reagents in advance from the corresponding aryl halides. Aryl sulfides that are prepared through sulfur‐specific reactions, such as S_NAr sulfanylation and extended Pummerer reactions, undergo this direct arylation, offering interesting transformations that are otherwise difficult to achieve with conventional halogen‐based organic synthesis.     

Tandem CH Activation/Arylation Catalyzed by Low‐Valent Iron Complexes with Bisiminopyridine Ligands

Tandem C?H activation/arylation between unactivated arenes and aryl halides catalyzed by iron complexes that bear redox‐active non‐innocent bisiminopyridine ligands is reported. Similar reactions catalyzed by first‐row transition metals have been shown to involve substrate‐based aryl radicals, whereas our catalytic system likely involves ligand‐centered radicals. Preliminary mechanistic investigations based on spectroscopic and reactivity studies, in conjunction with DFT calculations, led us to propose that the reaction could proceed through an inner‐sphere C?H activation pathway, which is rarely observed in the case of iron complexes. This bielectronic noble‐metal‐like behavior could be sustained by the redox‐active non‐innocent bisiminopyridine ligands.     

Palladium-Catalyzed C(sp(3))-H Arylation of Diarylmethanes at Room Temperature: Synthesis of Triarylmethanes via Deprotonative-Cross-Coupling Processes

Although metal-catalyzed direct arylation reactions of non- or weakly acidic C-H bonds have recently received much attention, chemists have relied heavily on substrates with appropriately placed directing groups to steer reactivity. To date, examples of intermolecular arylation of unactivated C(sp(3))-H bonds in the absence of a directing group remain scarce. We report herein the first general, high-yielding, and scalable method for palladium-catalyzed C(sp(3))-H arylation of simple diarylmethane derivatives with aryl bromides at room temperature. This method facilitates access to a variety of sterically and electronically diverse hetero- and nonheteroaryl-containing triarylmethanes, a class of compounds with various applications and interesting biological activity. Key to the success of this approach is an in situ metalation of the substrate via C-H deprotonation under catalytic cross-coupling conditions, which is referred to as a deprotonative-cross-coupling process (DCCP). Base and catalyst identification were performed by high-throughput experimentation (HTE) and led to a unique base/catalyst combination [KN(SiMe(3))(2)/Pd-NiXantphos] that proved to efficiently promote the room-temperature DCCP of diarylmethanes. Additionally, the DCCP exhibits remarkable chemoselectivity in the presence of substrates that are known to undergo O-, N-, enolate-, and C(sp(2))-H arylation.     

Reactivity of 4‐phenylthiazoles in ruthenium catalyzed direct arylations

The reactivity of the phenyl substituent of 4‐phenylthiazoles in Ru‐catalyzed direct arylation was studied. 4‐Phenylthiazole was found to be unreactive; whereas, the introduction of an aryl unit at C5‐position of 4‐phenylthiazole enhances its reactivity, allowing the selective mono‐arylation of the phenyl unit of 4‐phenylthiazoles in moderate to high yields using 5 mol% of [Ru(p‐cymene)Cl₂]₂ catalyst precursor associated to KOPiv as base. These results reveal that the conformation and electronic properties of 4‐phenylthiazoles are crucial to allow the formation of suitable intermediates in the course of the catalytic cycle. The reaction tolerated both electron‐rich and electron‐poor aryl bromides allowing the straightforward tuning of the electronic properties of the arylated 2‐methyl‐4‐phenyl‐5‐arylthiazoles.     

某些含芳碲基或烷碲基的1, 4-苯醌和1, 4-萘醌衍生物

四氯-1,4-苯醌(1)和2,3-二氯-1,4-萘醌(2)中的氯相当活泼,能和许多亲核试剂反应,如醇和酚;硫醇和硫酚;胺及许多含NH的杂环化合物。1和2与磷亲核试剂的反应也是已知的,本文报道1及2和芳碲基或烷碲基亲试剂的反应。     

Catalyst and base controlled site-selective sp and sp direct arylation of azine N-oxides

Site-selective direct arylation of both sp² and sp³ sites on azine N-oxide substrates is described. The arylation reactions are carried out in either a divergent manner or a sequential manner. The sp³ arylation reaction is applied to the synthesis of the natural products, papaverine and crykonisine, and a rationale for low reactivity of electron-deficient aryl halides is provided. Mechanistic investigations point toward the intimate involvement of the base in the mechanism of these reactions.     

Arylation of adamantanamines: III. Palladium-catalyzed arylation of adamantane-1,3-diyldimethanamine and 2,2′-(adamantane-1,3-diyl)diethanamine

Palladium-catalyzed arylation of adamantane-1,3-diyldimethanamine and 2,2′-(adamantane-1,3-diyl) diethanamine with isomeric bromochloro- and dibromobenzenes was studied. The yields of N,N′-diarylation products depend on the initial diamine and dihalobenzene structure. Side reactions were revealed, which reduced the yield of the target products. The arylation of 2,2′-(adamantane-1,3-diyl)diethanamine gives the corresponding N,N′-diaryl derivatives with better yield. The possibility for synthesizing unsymmetrical N,N′-diaryl derivatives of 2,2′-(adamantane-1,3-diyl)diethanamine was demonstrated.     

Aryne Multicomponent Reactions by Directed C−H Activation

Arylation via ortho C−H activation by the aid of directing groups has been explored recently by many researchers. Herein, a palladium-catalyzed C−H arylation using 8-aminoquinoline as a bidentate directing group has been developed. The reaction furnishes only C−H arylation, unlike previous methods where cyclization to corresponding isoquinolones is observed. More interestingly, sequential C−H functionalization was observed when methylacrylate and acrylonitrile was added; this led to C−H olefination with the aryl group, which was installed from the aryne precursor.     

An improved catalyst for the asymmetric arylation of ketone enolates

A new catalyst system for the enantioselective alpha-arylation of ketones is reported. This catalyst, prepared from Pd(2)(dba)(3) and a bulky dialkylphosphino-binaphthyl ligand, is able to effect the asymmetric arylation of ketone enolates with aryl bromides utilizing NaO(t)()Bu as base. These new catalysts enjoy much higher reactivity than previous systems; arylation reactions could be effected at room temperature with only 2 mol % of the Pd catalyst. The coupling of alpha-alkyl-alpha'-protected cyclopentanones proceeded in high yield, and the resulting quaternary stereogenic center was installed in up to 94% ee.     

Arylation of adamantanamines: V. Palladium-catalyzed amination of isomeric chloroquinolines with diamines of the adamantane series

Palladium-catalyzed arylation of diamines of the adamantane series with isomeric 2-, 4-, and 6-chloroquinoline was studied, and optimal conditions for the synthesis of the corresponding N,N′-diaryl derivatives were found. N,N-Diarylation products of primary amino groups in the diamines bearing 2-aminoethyl and 4-aminophenyl substituents were readily formed.     

Palladium-mediated arylation of 3-aminopiperidines and 3-aminopyrrolidines

This paper describes the palladium-catalyzed arylation of 1-substituted 3-aminopyrrolidines or piperidines. Palladium(0) (1-2 mol %) in conjunction with "Buchwald's ligand" [2-(dimethylamino)-2'-(dicyclohexylphosphine)biphenyl] was shown to be the catalyst of choice for the coupling with aryl bromides or chlorides. When bromobenzene was used, a strong temperature effect was noticed. Whereas no reaction occurred at 100 degrees C, yields higher than 85% were obtained at 130 degrees C for each substrate. Such an effect was not observed when diphosphines were used. Whereas Xantphos and, to a lesser extent BINAP, were moderately efficient in the coupling of all diamines, the palladium-mediated arylation in the presence of monophosphines was strongly dependent on the substrate. The results suggest the participation of both nitrogens of the aminoheterocycle in the reactive intermediate. This participation could also account for the highly selective arylation of the endocyclic nitrogen of unsubstituted 3-aminopyrrolidine or piperidine. Optimal conditions were found for the arylation using 2- or 4-substituted electron-poor or enriched aryl halides.     

Palladium-catalyzed arylation of alpha,alpha-disubstituted arylmethanols via cleavage of a C-C or a C-H bond to give biaryls

The palladium-catalyzed arylation of alpha,alpha-disubstituted arylmethanols with aryl halides proceeds not only via C-H bond cleavage at the ortho-position, but also via cleavage of the sp(2)-sp(3) C-C bond with the liberation of ketones (beta-carbon elimination) to give the corresponding biaryls. Both reactions appear to occur through common arylpalladium(II) alcoholate intermediates. The results of systematic studies with respect to which C-C or C-H bond is preferentially cleaved in the arylation are reported. Among the important findings is the selective elimination of ortho-substituted aryl groups even from aryl(diphenyl)methanols due to steric reasons. Thus, various biaryls having ortho-substituents can be produced efficiently by treatment of the corresponding aryl(diphenyl or dimethyl)methanols with aryl bromides and chlorides.