Synthesis,characterization and comparative study of mesomorphic properties of some new compounds containing both 1,2,4- and 1,3,4-oxadiazole moieties linked in the same molecule

One new homologous series of compounds containing 1,2,4- and 1,3,4-oxadiazole rings in the same molecule was synthesized. 3-(4-Butoxyphenyl)-5-{4-[5-(4-alkoxyphenyl)-1,3,4-oxadiazol-2-yl]phenyl}-1,2,4-oxadiazole (VII)_1–8 were synthesized by several procedures. This series has been characterized by FT-IR and ¹H NMR spectroscopy. Their liquid crystalline properties were studied by polarizing optical microscopy (POM) and differential scanning calorimetry (DSC). This series did not show any liquid crystalline behaviors and only crystal to isotropic liquid transition was observed.     

Synthesis and characterisation of star-shaped liquid crystalline polymer with a POSS core

The star-shaped POSS-graft-LCP with POSS as the core and liquid crystal polymer, poly{6-(4?-octyloxyphenyl-4″-benzoyl)hexyl acrylate}, as arms was prepared by atom transfer radical polymerisation technique using octa(3-chloropropyl) polyhedral oligomeric silsesquioxane [POSS-(CH₂CH₂CH₂Cl)₈] as initiator. For comparison, the linear liquid crystal polymer, poly{6-(4?-octyloxyphenyl-4″-benzoyl)hexyl acrylate} (LLCP), was obtained by conventional radical polymerisation. Both liquid crystal polymers were characterised by FT-IR, ¹H NMR, ¹³C NMR, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, polarised optical microscopy and X-ray diffraction analysis. The liquid crystal phase behaviour research demonstrated that both liquid crystal polymers were reversible thermotropic nematic liquid crystal materials. The number of polymerisation degree of every arm attached on POSS in POSS-graft-LCP impacted greatly on the liquid crystal properties and only a small one was necessary for it to exhibit a broad liquid crystal range. Results further demonstrated that the special star-shaped topology of POSS and the eight arms attached helped POSS-graft-LCP form and stabilise liquid crystal phase easily. This research may further expand the way to star-shaped LCPs by employing a variety of (meth)acrylate and other vinyl liquid crystalline monomers.     

Synthesis, characterization and thermal properties of new aromatic quaternary ammonium bromides: precursors for ionic liquids and complexation studies

Series of new aromatic R₂R′₂N⁺Br⁻ (R=benzyl, 4-methylbenzyl, 2-phenylethyl, 3-phenylpropyl; R′=ethyl, methyl, isopropyl) or RR′₂NH⁺Br⁻-type (R=benzyl, R′=isopropyl) quaternary ammonium bromides were prepared by using novel synthetic route in which a formamide (N,N-diethylformamide, N,N-dimethylformamide, N,N-diisopropylformamide) is treated with aralkyl halide in presence of a weak base. The compounds were characterized by ¹H-NMR and ¹³C-NMR spectroscopy and mass spectrometry. Structures of the crystalline compounds were determined by X-ray single crystal diffraction, and in addition the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bulk material. Three of the compounds crystallized in monoclinic, two in orthorhombic and one in triclinic crystal system, showing ion pairs, which are interconnected by weak hydrogen bonds and weak π-π interactions between the phenyl rings. Three of the compounds appeared as viscous oil or waxes. Finally, TG/DTA and DSC methods were used to analyze thermal properties of the prepared compounds. The lowest melting points were obtained for diethyldi-(2-phenylethyl)ammonium bromide (122.2 °C) and for diethyldi-(3-phenylpropyl)-ammonium bromide (109.1 °C). In general, decomposition of the compounds started at 170-190 °C without identifiable cleavages, thus liquid ranges of 30-70 °C were observed for some of the compounds.     

Optical and morphological characterization of polyacrylamide hydrogel and liquid crystal systems

In this work, the thermotropic liquid crystal MBBA (N-(4-methoxybenzilidene)-4-butylaniline), entrapped on hydrogels, based on cross-linked polyacrylamide (PAAm), was studied. The liquid crystalline phases of system were characterized by polarized optical microscopy (POM), refractive index, optical transmittance, scanning electron microscopy (SEM) and water loss. It was verified the presence of birefringence on hydrogel + liquid crystal. The dynamic of formation of such birefringence finished 40 days after the hydrogel synthesis. The effective birefringence Δn, i.e., the difference on refractive index of polyacrylamide hydrogel to refractive index of hydrogel + liquid crystal (Δn₁) and the difference on refractive index of liquid crystal (MBBA) to refractive index of hydrogel + liquid crystal (Δn₂) are dependent of content of acrylamide (AAm) and MBBA on hydrogel. The increase on Δn₁ and Δn₂ with the polyacrylamide content on hydrogel was attributed to decreasing of the mobility liquid crystal inside the hydrogel. Also, an increase on MBBA concentration in the polymeric matrix provides a reduction in the values of optical transmittance in the system. The morphology observed by SEM shows that hydrogel + liquid crystal is more compact that PAAm hydrogels. The presence of MBBA causes an increase in hydrophobicity. The water loss speed is favored by the increase in the amount of MBBA present in the hydrogels.     

Synthesis,characterization, crystal structure,and antibacterial evaluation of Ni (II) complex with new dithiophosphorus compound

The reaction of 2,4-bis (4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane-2,4-disulfide (Lawesson^’s reagent) with phenylethylamine produced [H₃NCH₂CH₂C₆H₅]⁺ [(C₆H₅CH₂CH₂NH)(p C₆H₄OMe)PS₂]^? (1). Furthermore, reaction of 1 with NiCl₂ in dry methanol led to the novel complex 2. The compounds were characterized by ¹H and ³¹P NMR, IR spectroscopy, and elemental analysis. A single crystal X-ray structure of complex 2 showed that the nickel complex is square planar. The complex formed a supramolecular structure via intermolecular S1…H7B and O1…H2N2 hydrogen bonds. The X-ray crystallography of complex showed [R²₂](18) and R⁴₄(18) motifs in the monomers were connected to each other via S1…H7B, O1…H2N2 hydrogen bonds with donor–acceptor distance of 2.89 and 2.51 Å, respectively. The new compounds were additionally tested in view of their antibacterial properties.     

Synthesis and liquid crystal properties of new cyclic carbonate monomers functionalised with cholesteryl moiety

ABSTRACT

Four new liquid crystal cyclic carbonate monomers M₁–M₄, with cholesteryl moiety and flexible spacer of different lengths, were synthesised through coupling reaction. The chemical structures, mesophase properties and thermal behaviour of the monomers were characterised with Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy (¹H NMR), polarising optical microscopy, differential scanning calorimetry and X-ray diffraction. Based on these results, the relationship between the number of methylene groups into flexible chain and the mesomorphism of the monomers was investigated. It was found that all the monomers showed a focal conic texture of a smectic A phase and exhibited an interdigitated molecular arrangement. Moreover, the glass transition temperature and the isotropisation temperature of the monomers except M₁ decreased, and the mesophase range narrowed as the number of methylene units into the flexible chain increased.     

Synthesis, characterization and thermal properties of small R2R2NX-type quaternary ammonium halides

Twenty-one R₂R^′₂N⁺X⁻ -type (R=methyl or ethyl, R^′=alkyl, X=Br or I) quaternary ammonium (QA) halides have been prepared by using a novel one-pot synthetic route in which a formamide (dimethyl-, diethylformamide, etc.) is treated with alkyl halide in the presence of sodium or potassium carbonate. The formation of QA halides was verified with ¹H-NMR, ¹³C-NMR, MS and elemental analysis. The crystal structures of four QA halides (two bromide and two iodide) were determined using X-ray single crystal diffraction, and the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bulk material. The thermal properties of all compounds were studied using TG/DTA and DSC methods. The smallest compounds decomposed during or before melting. The decreasing trend of melting points was observed when the alkyl chain length was increased. The liquid ranges of 120-180 °C were observed for compounds with 5-6 carbon atoms in the alkyl chain. The low melting points and wide liquid ranges suggest potential applicability of these compounds for example as ionic liquids precursors.     

Synthesis,structure, geometrical,and spectral characteristics of the (HL<Superscript><Emphasis Type="Italic">n</Emphasis></Superscript>)<Subscript>2</Subscript>[CuCl<Subscript>4</Subscript>] complexes. Crystal and molecular structure of bis(2-methylimidazolium) tetrachlorocuprate(II)

The (HL ⁿ )₂[CuCl₄] complexes (where L ⁿ are organic nitrogen-containing bases with n = 1–6) were synthesized. The crystal and molecular structures of bis(2-methylimidazolium) tetrachlorocuprate(II), (HL¹)₂[CuCl₄], were determined. The spectral characteristics of the complexes were measured. The correlations between the degree of distortion of the crystal structure of the tetrachlorocuprate anion and the hydrogen bond parameters and the spectral characteristics of compounds were obtained.     

Sulfur-containing terpyridine derivatives: synthesis, coordination properties, and adsorption on the gold surface

Approaches to the synthesis of organic aurophilic ligands, viz., sulfur-containing 2,2′:6′,2’-terpyridine derivatives, were developed. Complexation reactions of the terpyridine ligands having thiophenol, diaryl disulfide, and alkyl aryl sulfide fragments with Co ⁱⁱ , Ni ⁱⁱ , and Rh ⁱⁱⁱ salts were studied. The structures of the coordination compounds obtained were established based on the elemental analysis data, density functional calculations, and electron spectroscopy. The structure of the complex of 4′-(4-methylsulfanyl)-2,2′:6′,2"-terpyridine with Ni(BF₄)₂ was also established by X-ray diffraction analysis. A method was proposed for the preparation of gold nanoparticle dimeric aggregates via coordination interactions of the ligands adsorbed on the gold nanoparticle surface with transition metal ions. A degree of nanoparticle aggregation upon their reaction with solutions of complex compounds of aurophilic nitrogen-containing ligands was determined by the concentration of the solution of the complex used.     

Synthesis and characterisation of polymethacrylates containing para-, meta- and ortho-monosubstituted azobenzene moieties in the side chain

Three sets of novel side-chain liquid crystalline polymers with monosubstituted azobenzene moieties in the side-chain have been studied. These are poly(p-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PPHABM), poly(m-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PMHABM) and poly(o-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (POHABM). The chemical structure of the monomers was confirmed by ¹H NMR, ¹³C NMR spectroscopy and elemental analysis. The structural characterisation of the polymers was performed by ¹H NMR spectroscopy and gel permeation chromatography, and their phase behaviour and liquid crystalline properties were studied using differential scanning calorimetry, polarised optical microscopy and wide-angle X-ray diffraction. The results show that the transitional behaviour of side-chain liquid crystalline polymers containing monosubstituted azobenzene moieties depends strongly on the position of the substituent on the azobenzene moiety; for example, the ortho-monosubstituted polymers do not form liquid crystalline phases, but all the para- and meta-monosubstituted polymers exhibit a smectic A phase. Furthermore, the glass transition temperature (T_g ) of the polymers decreases in the order, para > meta > ortho. For the PPHABM and PMHABM polymers the isotropic temperature (T_i ) and liquid crystalline range (ΔT, from T_g to T_i ) are found to be in the order, para > meta, although it is surprising that the associated enthalpy changes in these polymers is the opposite order, meta > para.     

From mesogens to metallomesogens. Synthesis,characterisation, liquid crystal and luminescent properties

Continuation with our previous investigation which refers to the synthesis of a series of hydrophobic symmetrical azine compounds: 1,2-bis[4-(n-alkoxy)benzylidene]hydrazine (where, n-alkoxy: O(CH₂)_nH, n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 16 or 18), a series of hydrophobic asymmetrical azine compounds: [1-(4-propyloxy)-2-(4?-(n-alkoxy))benzylidene]hydrazine (where, n-alkoxy: O(CH₂)_nH, n = 1, 2, 4, 5, 6, 7, 8, 9, 10, 12, 16 or 18) was synthesised following an efficient and practical method. These compounds were synthesised by the condensation reaction of hydrazine hydrate with 4-propyloxybenzaldehyde and appropriately 4-(n-alkoxy)benzaldehydes in acidic medium and ambient conditions (very simple way with no need of any sophisticated techniques). Moreover, two new series of silver(I) complexes based on symmetrical or asymmetrical azines have been synthesised (linear-binuclear type complexes with the general formula [Ag₂(L)(NO₃)₂] were obtained). The organic compounds and their silver(I) complexes were characterised using different techniques: microelemental analysis and spectral data (FTIR, UV–Vis, ¹HNMR, ¹³C{¹H}NMR, 2D ¹H-¹H-COSY, 2D ¹H-¹³C-HSQC and mass spectra) as well as molar conductivity measurements for silver(I) complexes. Liquid crystal behaviour of the prepared compounds were studied using polarised light optical microscopy and confirmed with differential scanning calorimetry and X-ray powder diffraction techniques. The studies revealed that all azine compounds and some of silver(I) complexes are liquid crystal materials. The luminescent properties of all the prepared compounds were also investigated which confirmed that all of these compounds are photo-luminescent in the crystalline solid state and in the mesophase.     

Synthesis,spectroscopic, thermal,crystal structure properties,and characterization of new Hofmann-Td-type complexes with 3-aminopyridine

In this study, synthesis of two new tetracyanocadmate(II) and tetracyanozincate(II) complexes based on 3-aminopyridine (3AP) and investigation of their structural properties were reported. These complexes were characterized by using vibration spectroscopy, elemental, thermal analysis and single crystal X-ray diffraction (SC-XRD) techniques. Investigation of the elemental, spectral and single crystal data of these complexes showed that the formulas [Cd(3AP)₂Zn(μ₄-CN)₄]_n (1) and [Cd(3AP)₂Cd(μ₄-CN)₄]_n (2) fully explained their crystal structure. General information about the structural and chemical properties of these complexes obtained in single crystal form was obtained by observing the changes in the characteristic peaks of the 3AP with the [Zn(μ₄-CN)₄]^2- and [Cd(μ₄-CN)₄]^2- structures that make up these complexes. The behaviors of these complexes against changes in temperature were obtained by examining the temperature-dependent changes of their mass. The asymmetric unit of the heterometallic complexes 1 and 2 consist of half Cd(II) ion, half M ion [M = Zn1 in 1 and Cd2 in 2], two cyanide ligands and one 3AP.     

Effect of terminal perfluorocarbon chain containing mesogens on phase behaviors of chiral comb-like liquid crystalline polymers

A novel perfluorinated liquid crystal 4′-(2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctanoyloxy)biphenyl-4-yl undec-10-enoate (PFOBU) was synthesized, which exhibited smectic C phase. Several liquid crystalline polymers (PI–PVI) were synthesized by use of poly(methylhydrogeno)siloxane, PFOBU, and cholesteryl 3-(4-allyloxy-phenyl)-acryloate. The chemical structures and liquid crystalline (LC) properties of the monomers and polymers, and some ferroelectric properties of the chiral smectic C (S_C^*) phase were characterized by use of various experimental techniques. The effect of perfluorocarbon chains on phase behaviors of the fluorinated LC polysiloxanes was studied as well. PI and PII showed single chiral nematic (N^*) mesophase when they were heated and cooled, but PIII, PIV, PV, and PVI containing more perfluorocarbon chain units exhibited S_C^* phase besides N^* mesophase. Introduction of perfluorocarbon chain containing mesogens to the chiral cholesteryl-containing polymer systems resulted in a S_C^* mesophases, indicating that the fluorophobic effect could lead to microphase segregation and modifications of smectic mesophases from the chiral nematic phase.     

Disordered structures,vibrational spectroscopy,thermal behavior,and electrical properties of two new tetrachlorometallates complexes [(CH3CH2CH2)4N]2MIICl4 with MII = Co and Mn

The two new hybrids single crystals having the general formula [(CH₃CH₂CH₂)₄N]₂M^IICl₄ with M^II = Co (1) and Mn (2) have been synthetised by the slow evaporation process in aqueous solutions. In this article, these compounds were described by the following characterization techniques: X-rays diffraction, thermal analysis (TGA-TDA), vibrational spectroscopy, nuclear magnetic resonance (NMR), and electrical properties. From the crystallographic study, the crystals (1) and (2) have been disclosed to be crystallized too in the centrosymmetric monoclinic systems, with space group P2₁/c (Z = 4) and C2/c (Z = 8), respectively. Their crystal structures consist of [MCl₄]²⁻ anions and two different cations [(CH₃CH₂CH₂)₄N]⁺, which are connected by a three dimensional network of C-H···Cl hydrogen bonds. In both crystals, each M^II center atom being surrounded by four chloride ligands forming a slightly distorted tetrahedral geometry. The tetrahedral [CoCl₄]²⁻ is ordered, while the tetrahedral [MnCl₄]²⁻ is disordered. Some tetrapropylammonium cations of these compounds are found to be disordered. The thermal analysis studies made in the temperature range (298–473 K) did not show any phase transition for the two crystals. Furthermore, the electrical properties of the two compounds are studied by using the complex impedance spectroscopy technique in the temperature and frequency field varied of 290–363 K and 1 kHz–13 MHz, respectively.     

Coordination Chemistry of a Bis(Tetrazine) Tweezer: A Case of Host-Guest Behavior with Silver Salts

The carbon-carbon cross-coupling of phenyl s-tetrazine (Tz) units at their ortho-phenyl positions allows the formation of constrained bis(tetrazines) with original tweezer structures. In these compounds, the face-to-face positioning of the central tetrazine cores is reinforced by π-stacking of the electron-poor nitrogen-containing heteroaromatic moieties. The resulting tetra-aromatic structure can be used as a weak coordinating ligand with cationic silver. This coordination generates a set of bis(tetrazine)-silver(I) coordination complexes tolerating a large variety of counter anions of various geometries, namely, PF₆⁻, BF₄⁻, SbF₆⁻, ClO₄⁻, NTf₂⁻, and OTf⁻. These compounds were characterized in the solid state by single-crystal X-ray diffraction (XRD) and diffuse reflectance spectroscopy, and in solution by ¹H-NMR, mass spectrometry, electroanalysis, and UV-visible absorption spectrophotometry. The X-ray crystal structure of complexes {[Ag(3)][PF₆]}_∞ (4) and {[Ag(3)][SbF₆]}_∞ (6), where 3 is 3,3′-[(1,1′-biphenyl)-2,2′-diyl]-6,6′-bis(phenyl)-1,2,4,5-tetrazine, revealed the formation of 1D polymeric chains, characterized by an evolution to a large opening of the original tweezer and a coordination of silver(I) via two chelating nitrogen atom and some C=C π-interactions. Electrochemical and UV spectroscopic properties of the original tweezer and of the corresponding silver complexes are reported and compared. ¹H-NMR titrations with AgNTf₂ allowed the determination of the stoichiometry and apparent stability of two solution species, namely [Ag(3)]⁺ and [Ag(3)₂]²⁺, that formed in CDCl₃/CD₃OD 2:1 v/v mixtures.     

Synthesis of new monodendrons,gallic acid derivatives,self- assembled in a columnar phase

This article describes the synthesis and liquid crystal properties of new compounds that are derived from gallic acid. All the compounds were characterised by ¹H and ¹³C nuclear magnetic resonance spectroscopy (¹H NMR and ¹³C NMR), Infrared spectroscopy (IR) and Elemental analysis (CHN). The mesophases of these compounds were characterised using polarising optical microscopy (POM), differential scanning calorimetry (DSC) and SAXS measurements. The morphology of the surface of the films was investigated using atomic force microscopy (AFM). Compounds 9 and 13, which remain in a supercooled state until room temperature, do not exhibit liquid crystalline behaviour. The other compounds (i.e., 5, 7 and 8) self-assemble into tubular supramolecular architectures generating hexagonal columnar (Col_h) mesophases, which was confirmed by SAXS measurements.     

Synthesis and properties of liquid crystal monomers containing a reactive group in the lateral substituent

A series of nematic liquid crystal (LC) monomers containing a reactive group (double bonds) in the lateral substituent was designed and synthesised. Length of the lateral substituted groups that have one double bond varied from 1 to 4 methylene units. Length of the terminal substituted groups varied from 2 to 5 methylene units. The molecular structures of the intermediates and the LC monomers were characterised by Fourier transform infrared spectroscopy (FT-IR), elemental analysis and nuclear magnetic resonance (NMR) spectroscopy. The thermal phase behaviour of the monomers was investigated by differential scanning calorimetry (DSC) and polarised optical microscopy (POM) coupled with hot stage. Some molecules (V₁₅, V₂₅) with high aspect ratio exhibit enantiotropic nematic mesophase. The other compounds (V₁₂, V₂₂, V₄₂, V₄₃) show monotropic nematic mesophase during cooling. The relationship between the structure and mesomorphic property is also discussed.     

Polymerization of Blending Cholesteryl Acrylate and Methyl Phenyl Benzoyl Acrylate

Liquid crystal is a material which is between solid and liquid phase and commonly called mesophase. Blends of liquid crystal are of great interest because of their unique optical properties. Blending in this study using two monomers of liquid crystal were cholesteryl acrylate and methyl phenyl benzoyl acrylate. The polymerization process using uv curing techniques by irradiation UV ray and without irradiation UV ray. Polymerization of blending liquid crystal acrylate using initiator 2-hydroxy-2-methyl-1-phenylpropane. Based on peak at GPC curve of polymerization by irradiation UV ray, type of that polymer is copolymer. Therefore the polymerization without UV ray, type of that polymer is homopolymer. SEM images of liquid crystal acrylate polymer showed lamella chain models that are characteristic of a polymer chains. Type of polymer liquid crystal acrylate was the type of Side Chain Liquid Crystalline Polymers (SCLCPs). Therefore acrylate polymer liquid crystal in this research has semi-crystalline phase, which contained crystalline phase and amorphous phase on the XRD pattern. The results of FT-IR spectroscopic characterization of the two monomers showed a peak at the wave number of 1600.43 cm ^-1 and 1622.86 cm^-1 which indicates a double bond (C=C) were obtained from acrylation. While the spectroscopy on the product blending the wave number of the peak regions is reduced that shows that carbon double bonds (C=C) in the acrylate group has polymerized. It also strengthened with a very sharp peak for CC functional groups on the wave number of 2855.15 cm^-1. The results of this study indicate that the liquid crystal polymer acrylic polymerization results with radiation UV ray and without UV ray, respectively absorb light in the UV wavelength region 363 nm and 351 nm.     

Preparation and properties of highly birefringent liquid crystalline materials: styrene monomers with acetylenes,naphthyl, and isothiocyanate groups

Two new series of styrene monomers with different alkyl chain length were successfully synthesised. The chemical structures of synthetic intermediates and monomers were confirmed by Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance spectroscopy, mass spectrometry and elemental analysis. Their thermal stability, transition temperatures and phase sequences were investigated by polarised light microscopy, thermogravimetric analysis, differential scanning calorimetry and one-dimensional wide-angle X-ray diffraction. The birefringent and photoelectric properties, UV–vis and fluorescence spectroscopy were also measured using Abbe refractometer and fluorescent apparatus. The results indicated that all the monomers exhibited a liquid crystalline phase at higher temperature, high birefringence values between 0.4 and 0.7, and good photoluminescence properties. Optical anisotropy of homologous molecules was reduced with the increase of alkyl chain length due to the decrease of molecular polarisation. Moreover, a significant effect of the chemical structure on the photoluminescence properties was also found and discussed according to the length of π-conjugation.     

Orientational order of tetra n-hexylesters of perylene and tetrachloroperylene tetracarboxylic acids in low-molar-mass liquid crystal investigated using absorption and fluorescence methods

The orientational order parameters <P₂> and <P₄> of perylene-3,4,9,10-tetra-(n-hexylester) (PTHE) and 1,6,7,12-tetrachloroperylene-3,4,9,10-tetra-(n-hexylester) (4Cl-PTHE) dye molecules dissolved in low-molar-mass liquid crystal, 4-(trans-4-n-hexylylcyclohexyl)-isothiocyanobenzene, are calculated from the experimental values of polarised absorption and fluorescence anisotropies. The experimental data show that the substitution of chlorine atoms instead of hydrogen in the perylene core reduces the value of <P₂> parameter. Moreover, the <P₂> and <P₄> values for molecules of the perylene derivatives, playing the role of the guest in the liquid crystal matrix, are much less than these values for molecules of the liquid crystal host. The extremely low negative values of <P₄> for the perylene dyes are explained as the result of the preferable oblique orientation of the main molecular symmetry axis of the probe with respect to the direction of the macroscopic orientation of the liquid crystal host molecules.