Self-assembled, pH-sensitive retinoate nanostructures ionically complexed with PEG-grafted cationic polyelectrolytes

All-trans-retinoic acids (ATRA) are ionically complexed with cationic polyelectrolytes containing tertiary amines and self-assembled into nanoscale colloidal structures. Poly(2-(dimethylamino)ethyl methacrylate) grafted with polyethylene glycol, poly(DMAEMA-g-PEG), is used as a double hydrophilic, cationic polyelectrolyte. The polyion/ATRA complexes are formed by adding ATRA in dimethyl sulfoxide into aqueous solution of poly(DMAEMA-g-PEG). This complexation effectively suppresses the formation of undesirable drug crystallites and produces stable colloidal nanostructures having a hydrodynamic diameter of about 15?nm at a neutral pH. However, as the pH decreases below about 6, they undergo dramatic structural change into large aggregates of about 250?nm in diameter presumably due to the dissociation of ATRA from the polyelectrolyte. We expect that this pH-sensitive response of the polyion/ATRA complexes is useful for intracellular translocation at a neutral pH followed by the endosomal escape of ATRA in an acidic condition.     

Thermosensitive and control release behavior of poly (N‐isopropylacrylamide‐co‐acrylic acid) latex particles

In this work, poly(N‐isopropylacrylamide‐co‐acrylic acid) (poly(NIPAAm‐AA)) copolymer latex particles (microgels) were synthesized by the method of soapless emulsion polymerization. Poly(NIPAAm‐AA) copolymer microgels have the property of being thermosensitive. The concentration of acrylic acid (AA) and crosslinking agent N,N′‐methylenebisacrylamide were important factors to influence the lower critical solution temperature (LCST) of poly(NIPAAm‐AA) microgels. The effects of AA and crosslinking agent on the swelling behavior of poly(NIPAAm‐AA) microgels were also studied. The poly(NIPAAm‐AA) copolymer microgels were then used as a thermosensitive drug carrier to load caffeine. The effects of concentration of AA and crosslinking agent on the control release of caffeine were investigated. How the AA content and crosslinking agent influenced the morphology and LCST of the microgels was discussed in detail. The relationship of morphology, swelling, and control release behavior of these thermosensitive microgels was established. A new scheme was proposed to interpret the control release of the microgels with different morphological structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5734–5741, 2008     

The synthesis of multiblock copolymer brush based on DSPAAC and CuAAC click reaction

Multiblock copolymer brushes have broad application in thermoplastic elastomers, drug delivery, porous materials, and nanolithography due to their unique structure and properties. In this research, a novel multiblock copolymer brush (PHEA-g-PEG)_x-co- (PEG₂₃)_y was synthesized by combining the efficient double strain-promoted azide-alkyne cycloaddition (DSPAAC) and copper-catalyzed azide-alkyne cycloaddition (CuAAC) click reactions. The gel permeation chromatography (GPC), proton nuclear magnetic resonance spectrometer (¹H NMR), Fourier transform infrared spectroscopy (FT-IR), and atomic force microscopy (AFM) were used to characterize the prepared polymers. The results demonstrated that the novel multiblock copolymer brush was successfully prepared. The mole ratio was 1/0.84 between block PHEA-g-PEG and block PEG₂₃, and the grafting density was 100%. The AFM image showed the morphologies of cylinder, sphere, and beads on a string owning to the random distribution of PHEA-g-PEG and PEG.     

Synthesis and characterization of biodegradable poly(L-aspartic acid-co-PEG)

The melt polycondensation reaction of the prepolymer prepared from N-(benzyloxycarbonyl)-L -aspartic acid anhydride (N-CBz-L -aspartic acid anhydride) and low molecular weight poly(ethylene glycol) (PEG) using titanium isopropoxide (TIP) as a catalyst produced the new biodegradable poly(L -aspartic acid-co-PEG). This new copolymer had pendant amine functional groups along the polymer backbone chain. The optimal reaction conditions for the preparation of the prepolymer were obtained by using a 0.12 mol % of p-toluenesulfonic acid with PEG 200 for 48 h. The weight-average molecular weight of the prepolymer increased from 1,290 to 31,700 upon melt polycondensation for 6 h at 130°C under vacuum using 0.5 wt % TIP as a catalyst. The synthesized monomer, prepolymer, and copolymer were characterized by FTIR, ¹H- and ¹³C-NMR, and UV spectrophotometers. Thermal properties of the prepolymer and the protected copolymer were measured by DSC. The glass transition temperature (T_g) of the prepolymer shifted to a significantly higher temperature with increasing molecular weight via melt polycondensation reaction, and no melting temperature was observed. The in vitro hydrolytic degradation of these poly(L -aspartic acid-co-PEG) was measured in terms of molecular weight loss at different times and pHs at 37°C. This pH-dependent molecular weight loss was due to a simple hydrolysis of the backbone ester linkages and was characterized by more rapid rates of hydrolysis at an alkaline pH. These new biodegradable poly(L -aspartic acid-co-PEG)s may have potential applications in the biomedical field. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2949–2959, 1998     

Study on Self-assembly of Poly(ethylene glycol)- block-poly(γ-benzyl L -glutamate)-graft-poly(ethylene glycol) Copolymer and Poly(γ-benzyl L -glutamate)- block-poly(ethylene glycol) Copolymer in Ethanol

Poly(ethylene glycol)-block-poly(γ-benzyl L-glutamate)-graft-poly(ethylene glycol) (PEG-b-PBLG-g-PEG) copolymer was synthesized by the ester exchange reaction of poly(γ-benzyl L-glutamate)-block-poly(ethylene glycol) (PBLG-block-PEG) copolymer with PEG chain, and PBLG-block-PEG copolymer was prepared by a standard N-carboxyl-γ-benzyl-L-glutamate anhydride (NCA) method. Nuclear magnetic resonance (NMR) spectroscopy was used to confirm the components of PBLG-block-PEG and PEG-b-PBLG-g-PEG. The self-association behaviors of PBLG-block-PEG and PEG-b-PBLG-g-PEG in ethanol were investigated by transmission electron microscopy (TEM), dynamic laser scattering (DLS), and viscometry. The experimental results revealed that the different molecular structures could exert marked effects on the self-assembly behaviors of PBLG-block-PEG and PEG-b-PBLG-g-PEG in ethanol. PBLG-block-PEG and PEG-b-PBLG-g-PEG could self-assemble to form polymeric micelles with a core-shell structure in the shapes of plump spherical and regular rice-like, respectively. Effects of the introduction of PBLG homopolymer on the average particle diameter of the micelles of PBLG-block-PEG and PEG-b-PBLG-g-PEG and influence of testing temperature on the critical micelle concentration of different copolymers were studied.     

Synthesis,characterization, and properties of block and bigraft copolymers

The syntheses of poly(styrene-b-isobutylene), poly[(ethylene-co-propylene-co-1,4-hexadiene)-g-styrene-g-α-methylstyrene], and poly[(ethylene-co-propylene-co-1,4-hexadiene)-g-styrene-g-isobutylene] have been accomplished by using the principle of selective sequential initiation. This method makes use of the large differences in initiation rates that exist between labile organic chlorides and bromides when these halides interact with alkylaluminum compounds. Synthesis conditions have been worked out which allow composition control. These new AB blocks and bigrafts exhibit unusual mechanical and solubility properties, some of which will be described. For example, the Nordel-g-PSt-g-PIB bigraft exhibits only one low temperature transition (DSC, Rheovibron), suggesting an intimate aggregation of Nordel and polyisobutylene phases.     

Tri-component diblock copolymers of poly(ethylene glycol)–poly(ε-caprolactone-<Emphasis Type="Italic">co</Emphasis>-lactide): synthesis,characterization and loading camptothecin

Biodegradable tri-component diblock copolymer was synthesized by bulk copolymerization of ε-caprolactone (CL) and D, L-lactide (LA) in the presence of methoxy poly(ethylene glycol) (MePEG), using stannous octoate as catalyst. Their chemical structure and physical properties were investigated by GPC, NMR, DSC, TGAand XRD. The increase of CL/LA ratio in the diblock copolymer leads to lower T _g, higher decomposition temperature and crystallinity. Nanoparticles formulated from MePEG–poly(CL-co-LA) (PCAE) possess spherical structure, which was characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The DLS results indicate that the particle size increased with the increase of CL/LA ratio and the hydrophobic fragment length in the copolymer. The drug encapsulation efficiency and the drug release behavior in vitro conditions of camptothecin were measured by high performance liquid chromatography (HPLC). The encapsulation efficiency can be achieved as high as 84.4% and the release behavior can be made well-controlled. MePEG–poly(CL-co-LA) nanoparticles might have a great potential as carriers for hydrophobic drugs.     

Fabrication of Gene Carrier via Self-assembly of Poly[(dimethylamino)ethyl Methacrylate] and Poly(aspartic acid)-grafted-Poly(ethylene glycol)

A biocompatible complex has been prepared as gene carrier via electrostatic interaction, which is composed of a polycation, that is, poly[(dimethylamino)ethyl methacrylate] end-capped with cholesterol moiety (Chol-PDMAEMA₃₀), along with a polyanion named poly(aspartic acid)-grafted-poly(ethylene glycol) (PASP-g-PEG). The complexes have less cytotoxicity compared to the case of alone Chol-PDMAEMA₃₀ or branched polyethylenimine (PEI) system.

In the present study, biocompatible complexes have been prepared as gene carrier via electrostatic interaction, which is composed of a polycation, that is, poly[(dimethylamino)ethyl methacrylate] end-capped with cholesterol moiety (Chol-PDMAEMA₃₀), along with a polyanion named poly(aspartic acid)-grafted-poly(ethylene glycol) (PASP-g-PEG). We first synthesized polysuccinimide (PSI) via condensation polymerization of aspartic acid, and then used PEG-NH₂ to react with the partial pentacyclic rings of PSI to yield a kind of graft copolymer polysuccinimide-grafted-poly(ethylene glycol) (PSI-g-PEG). After hydrolysis of the residual succinimide units, a new biodegradable and biocompatible graft copolymer PASP-g-PEG was prepared successfully. Chol-PDMAEMA₃₀ was synthesized via oxyanion-initiated polymerization, as reported in our previous literature. We investigated the interactions between every pair among calf thymus DNA, Chol-PDMAEMA₃₀, and PASP-g-PEG by agarose gel retardation assay. The results indicate that the prepared complexes could completely bind DNA and may become more stable during systemic circulation. The complexes have less cytotoxicity compared to the case of alone Chol-PDMAEMA₃₀ or branched polyethylenimine (PEI) system. Furthermore, the physicochemical properties of the complexes were also investigated by zeta potential, transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements. These biodegradable and biocompatible polymeric carriers have potential applications in gene delivery.     

Synthesis,Characterization and Aqueous Solution Behavior of a pH-responsive Double Hydrophilic Block Copolymer

The pH-responsive double hydrophilic block copolymer poly(ethylene glycol)-b-poly(methacylic acid-co-4-vinyl benzylamine hydrochloride salt) (PEG-b-PMAA/PVBAHS) was synthesized. A series of PEG-b-PMAA/PVBAHS with different molecule weights and compositions were characterized by IR, ¹H-NMR, elemental analysis and TGA. With different MAA/VBAHS ratio, the PEG-b-PMAA/PVBAHS copolymers had the different isoelectric point (IEP). Supermolecular structures of the block copolymers could be formed by the interionic interactions at different solution pH. Experiment results showed that the structures of the pH-responsive copolymers in aqueous solution could be changed at different pH environments. The aggregation of this double hydrophilic block copolymer in aqueous solution was determined by both of solution pH and copolymer composition.     

Polypyrrole/poly(N‐isopropylacrylamide‐co‐acrylic acid) thermosensitive and electrically conductive composite microgels

The electrically conductive polypyrrole/dodecylbenzene sulfonic acid/poly(N‐isopropylacrylamide‐co‐acrylic acid) (PPy/DBSA/poly(NIPAAm‐co‐AA)) composite microgels were synthesized by a chemical oxidation of pyrrole in the presence of DBSA as the primary dopant, and poly(NIPAAm‐co‐AA) microgels as the polymeric codopant and template, in which APS was used as the oxidant. It was proposed to prepare “intelligent” polymer microgel particles containing both thermosensitive and electrically conducting properties. The polymerization of pyrrole took place directly inside the microgel networks, leading to formation of composite microgels and the morphology was observed by transmission electron microscope. PPy particles interacted strongly with microgels, as the acid groups of microgels acted as the polymeric codopant. The composite microgels thus formed showed electrically conducting behavior dependent on humidity and temperature. At temperatures lower than lower critical solution temperature, the conductivity decreased with increasing the humidity and a small hysteresis phenomenon was observed. The hysteresis became indistinct when temperature was near volume phase transition temperature. However, after the treatment of high temperature and high humidity, the conductivity increased surprisingly due to the structure reorganization inside the composite microgels. The distinctive functionality of the PPy composite microgels was expected to be utilized in many attractive applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1648–1659, 2006     

Synthesis and characterization of AgBr nanocomposites by templated amphiphilic comb polymer

A novel amphiphilic graft copolymer, poly(vinylidene fluoride-co-chlorotrifluoroethylene)-g-poly(4-vinyl pyridine) (P(VDF-co-CTFE)-g-P4VP) at 65:35 wt.%, respectively, was synthesized via atom transfer radical polymerization (ATRP), as confirmed by nuclear magnetic resonance (¹H NMR) and transmission electron microscopy (TEM). Silver bromide (AgBr) nanoparticles were in situ generated within the self-assembled P(VDF-co-CTFE)-g-P4VP graft copolymer. TEM, UV–visible spectroscopy and X-ray diffraction (XRD) analyses support the successful formation of P(VDF-co-CTFE)-g-P4VP nanocomposites consisting of stabilized AgBr nanoparticles mostly 20–40 nm in size, which is presumably due to the capping action of the coordinating pyridine groups of the graft copolymer. The wavenumber of pyridine nitrogen in FT-IR spectra and the glass transition temperature (T_g) of the graft polymer measured by DSC shifted upon the formation of AgBr nanoparticles, indicating specific interactions between the nanoparticles and the graft copolymer matrix.     

Syntheses and biological activities of α-methoxy-3,6-endo-methylene-1,2,3,6-tetrahydrophthaloyl-5-fluorouracil and its polymers

The new monomer, α-methoxy-3,6-endo-methylene-1,2,3,6-tetrahydrophthaloyl-5-fluorouracil (MMTFU), was synthesized from 5-fluorouracil (5-FU) and α-methoxy-3,6-endo-methylene-1,2,3,6-tetrahydrophthaloyl chloride (MMTC). Poly(α-methoxy-3,6-endo-methylene-1,2,3,6-tetrahydrophthaloyl-5-fluorouracil) [poly(MMTFU)], poly(α-methoxy-3,6-endo-methylene-1,2,3,6-tetrahydrophthaloyl-5-fluorouracil-co-acrylicco-AA), and poly(α-methoxy-3,6-endo-methylene-1,2,3,6-tetrahydrophthaloyl-5-fluorouracil-co-vinyl acetate) [poly(MMTFU-co-VAc)] were synthesized by photopolymerizations using 2,2-dimethoxy-2-phenylacetophenone (DMP) as the photoinitiator. The synthesized MMTFU and the polymers were identified by FT-IR, ¹H-NMR, and ¹³C-NMR spectroscopies. The contents of MMTFU in poly(MMTFU-co-AA) and poly(MMTFU-co-VAc) determined by elemental analysis were 63 and 57 mol %, respectively. The number average molecular weights and polydispersity indices of synthesized polymers determined with GPC were in range of 7,700–19,100 and 1.6–2.7. The in vitro cytotoxicities of samples were evaluated with mouse mammary carcinoma (FM3A), mouse leukemia (P388), and human histiocytic lymphoma (U937) as cancer cell lines and mouse liver cells (AC2F) as a normal cell line. The cytotoxicities of 5-FU and synthesized samples against cancer cell lines increased in following orders: 5-FU > MMTFU > poly(MMTFU) > poly(MMTFU-co-AA) > poly(MMTFU-co-VAc). The in vivo antitumor activities of the synthesized samples against mice bearing the sarcoma 180 tumor cell line were evaluated. The in vivo antitumor activities of the polymers were greater than that of 5-FU at a dose of 80 mg/kg. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1625–1632, 1998     

Relationship among drug delivery behavior,degradation behavior and morphology of copolylactones derived from glycolide,l‐lactide and ε‐caprolactone

A series of copolylactones was synthesized by ring‐opening copolymerization of glycolide, L ‐lactide and ?‐caprolactone, using stannous octoate as catalyst. The in vitro degradation behaviors of them were studied and data demonstrated different degradation rates which mainly depended on the compositions. Investigation of the 5‐fluorouracil (5‐Fu) release from these copolylactones revealed that the composition, degradation rate and the morphology of the polymeric matrix played an important role on the drug release kinetics. A sustained 5‐Fu release without initial time lag was obtained from random poly(lactide‐co‐glycolide‐co‐caprolactone) (r‐PGLC) drug carrier, and it differed from the cases of polylactide (PLA) or random poly(lactide‐co‐glycolide) (PLGA), which usually showed an initial time lag or biphasic drug release behavior. It was due to the low glass transition temperature (T _g) of the r‐PGLC and the drug would diffuse faster in rubbery state under the experimental temperature. Furthermore, a significant change in the drug release behavior of r‐PGLC was observed when the temperatures were changed around the T _g of the drug carrier, which implied that the drug release behavior could be regulated by adjusting the morphology of the drug carrier. Copyright © 2002 John Wiley & Sons, Ltd.     

Poly(l-glutamic acid)-based star-block copolymers as pH-responsive nanocarriers for cationic drugs

Star-block copolymers PEI-g-(PLG-b-PEG), which consist of a hyperbranched polyethylenimine (PEI) core, a poly(l-glutamic acid) (PLG) inner shell, and a poly(ethylene glycol) (PEG) outer shell, were synthesised and evaluated as nanocarriers for cationic drugs. The synthesised star-block copolymers were characterised by ¹H NMR, gel permeation chromatography (GPC), dynamic light scattering (DLS), and transmission electron microscopy (TEM). Crystal violet (CV), as a model cationic dye, and doxorubicin hydrochloride (DOX), as a model anticancer drug, could be efficiently entrapped by the synthesised star-block copolymers at physiological pH as a result of electrostatic interactions between the cationic guest molecules and the negatively charged PLG segments in the PEI-g-(PLG-b-PEG) host. The drug–polymer complexes showed relatively high temporal stability at physiological pH and sustained release of the encapsulated drugs was observed. The entrapped model compounds demonstrated accelerated release as the pH was gradually decreased.     

Glucose sensitive poly (<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) microgel based etalons

Thermoresponsive microgels have been shown to be an excellent platform for designing sensor materials. Recently, poly (N-isopropylacrylamide)-co-acrylic acid (pNIPAm-co-AAc) microgel based etalon materials have been described as direct sensing materials that can be designed to have a single, unique color. These color tunable materials show immense promise for sensing due to their spectral sensitivity and bright visual color. Here, we describe a proof-of-concept for etalon sensing of glucose. We found that aminophenylboronic acid (APBA)-functionalized pNIPAm-co-AAc microgels in an etalon respond to 3 mg/mL glucose concentrations by red shifting their reflectance peaks by 110 nm up to 150 nm. Additionally, APBA-functionalized pNIPAm-co-AAc microgels have a depressed volume phase transition temperature at 18–20 °C, which shifts to 24–26 °C after glucose binding. We also demonstrate that these materials show a marked visual color change, which is a first step towards developing direct read-out sensor devices.     

Syntheses and antitumor activities of medium molecular weight polymers containing 5-fluorouracil

The new monomer α-ethoxy-3,6-endo-methylene-1,2,3,6-tetrahydrophthaloyl-5-fluorouracil (EMTFU) was synthesized from 5-fluorouracil (5-FU) and α-ethoxy-3,6-endo-methylene-1,2,3,6-tetrahydrophthaloyl chloride (EMTC). Poly(α-ethoxy-3,6-endomethylene-1,2,3,6-tetrahydrophthaloyl-5-fluorouracil) [poly(EMTFU)], poly(α-ethoxy-3,6-endo-methylene-1,2,3,6-tetrahydrophthaloyl-5-fluorouracil-co-acrylic acid) [poly(EMTFU-co-AA)], and poly(α-ethoxy-3,6-endomethylene-1,2,3,6-tetrahydrophthaloyl-5-fluorouracil-co-vinyl acetate) [poly(EMTFU-co-VAc)] were synthesized by photopolymerizations using 2,2-dimethoxy-2-phenylacetophenone (DMP) as the photoinitiator. The synthesized EMTFU and its polymers were identified by Fourier transfer infrared (FT-IR), ¹H nuclear magnetic resonance (NMR), and ¹³C-NMR spectroscopies. The contents of EMTFU in poly(EMTFU-co-AA) and poly(EMTFU-co-VAc) determined by elemental analysis were 46 and 70 mol %, respectively. The number average molecular weights of the synthesized polymers determined by gel permeation chromatography (GPC) were in range of 17,200–20,900. The in vitro cytotoxicities of samples were evaluated with mouse mammary carcinoma (FM3A), mouse leukemia (P388), and human histiocytic lymphoma (U937) as cancer cell lines and AC2F as a normal cell line. The cytotoxicities of 5-FU and synthesized samples against cancer cell lines increased in following orders: 5-FU ≈ EMTFU > poly(EMTFU-co-AA) > poly(EMTFU) > poly(EMTFU-co-VAc). The in vivo antitumor activities of the synthesized samples against mice bearing the sarcoma 180 tumor cell line were evaluated. The in vivo antitumor activities of EMTFU and its polymers were greater than those of 5-FU at a dosage of 80 mg/kg. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2985–2992, 1998     

PMMA-AES Blends Prepared by in situ Polymerization

Blends of poly(methyl methacrylate) (PMMA) and poly(acrylonitrile-g-(ethylene-co-propylene-co-diene)-g-styrene) (AES) were prepared by in situ polymerization. AES, a commercial elastomer obtained by radical copolymerization of styrene and acrylonitrile in the presence of ethylene-propylene-diene terpolymer (EPDM), was dissolved in methyl methacrylate and the in situ polymerization was conducted at 60 °C. The blends were characterized by CHN analysis, infrared spectroscopy (FTIR), carbon-13 nuclear magnetic resonance (¹³C NMR), dynamic mechanical analysis (DMA) and transmission electron microscopy (TEM). These blends are immiscible and present complex phase behavior. Selective extraction of the blends’ components showed that a fraction of the material is crosslinked and grafting reactions on EPDM chains take place during MMA polymerization. Syndiotactic PMMA was obtained in the presence of AES and this syndiotactic-specificity increased with increasing amount of AES. The morphology of polymerized specimens showed irregular domains of elastomeric phase and in some cases inclusions of PMMA could be observed.     

Synthesis and properties of organic-inorganic hybrid P(NIPAM-<Emphasis Type="Italic">co</Emphasis>-AM-<Emphasis Type="Italic">co</Emphasis>-TMSPMA) microgels

Utilizing the hydrolysis and condensation of the methoxysilyl moieties, organic-inorganic hybrid poly(N-isopropylacrylamide-co-acrylamide-co-3-(trimethoxysilyl)propylmethacrylate) P(NIPAM-co-AM-co-TMSPMA) microgels were prepared via two different methods. The first method was that the microgels were post-fabricated from the crosslinkable linear P(NIPAM-co-AM-co-TMSPMA) terpolymer aqueous solutions above the lower critical solution temperature (LCST) of the terpolymer. For the second method, the microgels were directly synthesized by conventional surfactant free emulsion copolymerization of NIPAM, AM, and TMSPMA. The hydrodynamic diameter and stability of the resultant P(NIPAM-co-AM-co-TMSPMA) microgels strongly depend on the pH and temperature of the microgel aqueous solution. The hydrodynamic diameters of the microgels decreased with increasing the measuring temperature. The phase transition temperature of the microgels was found to be around 34°C, which was independent of the initial terpolymer concentration and shifted to lower temperature with increasing the preparation temperature. Increasing the initial amount of AM will enhance the instability of the microgels at high pH values. Moreover, the P(NIPAM-co-AM-co-TMSPMA) microgels obtained from the linear terpolymer had more homogeneous microstructures as compared with the corresponding NIPAM/AM/TMSPMA microgels prepared by one step emulsion copolymerization as revealed by light scattering measurements.     

Novel aliphatic poly(ester‐carbonate) with pendant allyl ester groups and its folic acid functionalization

A series of novel poly(ester‐carbonate)s bearing pendant allyl ester groups P(LA‐co‐MAC)s were prepared by ring‐opening copolymerization of L ‐lactide (LA) and 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one (MAC) with diethyl zinc (ZnEt₂) as initiator. NMR analysis investigated the microstructure of the copolymer. DSC results indicated that the copolymers displayed a single glass‐transition temperature (T_g), which was indicative of a random copolymer, and the T_g decreased with increasing carbonate content in the copolymer. Then NHS‐activated folic acid (FA) first reacted with 2‐aminoethanethiol to yield FA‐SH; grafting FA‐SH to P(LA‐co‐MAC) in the presence of TEA produced P(LA‐co‐MAC)/FA. The structure of P(LA‐co‐MAC)/FA and its precursor were confirmed by ¹H NMR and XPS analysis. Cell experiments showed that FA‐grafted P(LA‐co‐MAC) had improved adhesion and proliferation behavior of vero cells on the polymer films. Therefore, the novel FA‐grafted block copolymer is expected to find application in drug delivery or tissue engineering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1852–1861, 2008     

Bioreducible unimolecular micelles based on amphiphilic multiarm hyperbranched copolymers for triggered drug release

A novel type of bioreducible amphiphilic multiarm hyperbranched copolymer (H40-star-PLA-SS-PEG) based on Boltorn® H40 core, poly(l-lactide) (PLA) inner-shell, and poly(ethylene glycol) (PEG) outer-shell with disulfide-linkages between the hydrophobic and hydrophilic moieties was developed as unimolecular micelles for controlled drug release triggered by reduction. The obtained H40-star-PLA-SS-PEG was characterized in detail by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), gel permeation chromatography (GPC), differential scanning calorimeter (DSC), and thermal gravimetric analysis (TGA). Transmission electron microscopy (TEM) and dynamic light scattering (DLS) analyses suggested that H40-star-PLA-SS-PEG formed stable unimolecular micelles in aqueous solution with an average diameter of 19 nm. Interestingly, these micelles aggregated into large particles rapidly in response to 10 mM dithiothreitol (DTT), most likely due to shedding of the hydrophilic PEG outer-shell through reductive cleavage of the disulfide bonds. As a hydrophobic anticancer model drug, doxorubicin (DOX) was encapsulated into these reductive unimolecular micelles. In vitro release studies revealed that under the reduction-stimulus, the detachment of PEG outer-shell in DOX-loaded micelles resulted in a rapid drug release. Flow cytometry and confocal laser scanning microscopy (CLSM) measurements indicated that these DOX-loaded micelles were easily internalized by living cells. Methyl tetrazolium (MTT) assay demonstrated a markedly enhanced drug efficacy of DOX-loaded H40-star-PLA-SS-PEG micelles as compared to free DOX. All of these results show that these bioreducible unimolecular micelles are promising carriers for the triggered intracellular delivery of hydrophobic anticancer drugs.