An optical multicast packet switching architecture shared with limited-range multi-wavelength converter and full-range wavelength converters

Optical packet switch with multicast capability can inspire a broad range of multipoint to multipoint applications in future optical networks. An optical multicast packet switching architecture, equipped with feedback shared small number of limited-range multi-wavelength converters (LMWCs) and output shared some full-range wavelength converters (FRWCs), is proposed for a wavelength-division multiplexed optical multicast network to improve multicast performance in the paper. The FRWCs are used to overcome the performance degradation in terms of packet loss probability due to only use LMWCs. In the architecture, the two converters are shared by all the multicast packets importing to the optical multicast switch node. A maximum bipartite matching with minimum edges weights strategy was designed to employ fewer wavelength converters and avoid useless degradation of optical signal quality for the architecture to improve the node performance. The simulation results show that the proposed architecture and its wavelength converter scheduling algorithm can reduce the multicast packet loss probability with relatively lesser wavelength conversion cost.     

Performance enhancement of optical burst switched networks

Optical burst switching (OBS) is an optical switching paradigm which offers a good tradeoff between the traditional optical circuit switching (OCS) and optical packet switching (OPS) since it has the relatively easy implementation of the first and the efficient bandwidth utilization of the second. Hence, OBS is a promising technology for the next generation optical Internet. A buffer-less OBS network can be implemented using ordinary optical communication equipment without the need for either wavelength converters or optical memories. In an OBS network, burst-loss performance is a critical concern. In OBS, the data-burst transmission is delayed by an offset time (relative to its burst control packet (BCP), or header) and the burst follows its header without waiting for an acknowledgment for resource reservation. Thus, a burst may be lost at an intermediate node due to contention, which is generally resolved according to the local routing and bandwidth information. The routing table maintained in each OBS node is generally pre-computed and fixed to forward the data bursts. Such a static forwarding feature might have limited efficiency to resolve contentions. Moreover, a burst may be lost and the network may be congested when a network element (e.g., fiber link) fails. In this paper, an efficient integrated scheme based on dynamic routing and burst segmentation has been proposed to improve reliability of data transport and network load balancing in optical burst switched networks. Simulation results demonstrate that the proposed approach reduces effectively blocking probability and hence contention. Further, it provides end-to-end throughput performance also. Hence, it establishes an appropriate tradeoff between loss rate and end-to-end throughput.     

Experimental demonstration of tunable multiple optical orthogonal codes sequences-based optical label for optical packets switching

In this paper, the tunable multiple optical orthogonal codes sequences (MOOCS)-based optical label for optical packet switching (OPS) (MOOCS-OPS) is experimentally demonstrated for the first time. The tunable MOOCS-based optical label is performed by using fiber Bragg grating (FBG)-based optical en/decoders group and optical switches configured by using Field Programmable Gate Array (FPGA), and the optical label is erased by using Semiconductor Optical Amplifier (SOA). Some waveforms of the MOOCS-based optical label, optical packet including the MOOCS-based optical label and the payloads are obtained, the switching control mechanism and the switching matrix are discussed, the bit error rate (BER) performance of this system is also studied. These experimental results show that the tunable MOOCS-OPS scheme is effective.     

Novel optical packet with non-return-to-zero label and duobinary carrier-suppressed return-to-zero payload

A novel packet format with non-return-to-zero (NRZ) label and duobinary carrier-suppressed return-to-zero (DCS-RZ) payload is proposed for optical packet switching networks.NRZ label is followed by DCS-RZ payload with a certain guard time.The spectra of the low-rate NRZ label locate around the optical carrier frequency where some parts of the corresponding spectra of the high-rate DCS-RZ payload have been suppressed due to DCS-RZ modulation.At the switching node,the label or payload extraction can be realized simply through an optical bandpass or notch filter respectively.The feasibility of the scheme is verified by the simulation on the famous photonic design platform designed by Virtual Photonics Inc.(VPI).The effects of optical filter bandwidth on the received signal quality are discussed by analyzing bit error rate(BER)and contrast ratio performances.     

Combining circuit and packet switching using a large port-count optical cross-connect for data center networks

The exponential increase in the data center network traffic has posed new challenges for achieving high throughput, low latency and energy consumption. To address these challenges, this paper presents a novel scheme that combines optical circuit and packet switching technologies together in a single optical cross-connect for data center networks. By utilizing fast tunable linecards and parallel array waveguide grating routers, the optical cross-connect can offer low latency, large scalability and high throughput in datacenter networks. A scheduling technique is designed to simultaneously accommodate circuit switching and packet switching in the optical cross-connect. The physical performance of this optical cross-connect in circuit and packet switching modes is investigated by experiments. In addition, the network performance of the optical cross-connect is evaluated through simulations under a mixed circuit/packet-switched traffic pattern. Results show that the network performance of the optical cross-connect does not degrade significantly with an increase in the number of racks, but it is affected by the circuit-switched traffic proportion.     

一种适用于光突发交换的区分型资源预留机制

将边缘结点突发汇聚算法与核心结点资源预留机制有机结合,提出了一种适用于光突发交换的区分型资源预留机制.引入“突发流”的概念,在边缘结点采用基于线性预测的突发汇聚算法将输入IP分组汇聚为单个突发或突发流;在核心结点引入“搭载请求”的思想,对单个突发和突发流采用不同的资源预留方案.仿真结果表明区分型资源预留机制可以明显改善光突发交换网络的丢失性能.     

Effects of the switching time in OPS/OBS networks

In this paper we present an analytical model, which considers the effects of the switching time on the network performance in service differentiated optical packet/burst switching (OPS/OBS) networks. Our results indicate that the switching time must be less than 10 % of the packet/burst duration in order to avoid any significant reductions in the network performance. Furthermore, regarding a network with full wavelength conversion, we show that the benefits of statistical resource sharing are almost non-existent for low priority traffic when the switching time is large.     

Performance analysis of modified optical burst switching (OBS) ring network using dummy node

In the present paper an analytical model of an optical burst switching ring network which is capable to handle the variable incoming traffic intelligently is presented. An efficient node architecture and network operating protocol enhances the data throughput in a congested network. Here we propose a node architecture to ease the traffic congestion in a ring network involving a dummy server connected to backbone of the ring topology to ease the traffic flow into the ring by diverting the packets under the congestion situation. An appropriate mathematical model for the proposed node architecture has been developed employing packet queuing control to estimate the amount of carried traffic for different node parameters and the analysis has been further extended to investigate the network performance under different signaling techniques.     

面向下一代航电系统的数据块填装性能

结合光分组交换(OPS)网络和光纤通道(FC)技术的优势, 提出一种下一代航电系统组网方案——基于光分组交换网络的光纤通道技术(FC over OPS)。建立了数学仿真模型, 研究了一种数据块填装算法与网络实时性之间的关系, 分析不同的参数如发送带宽、最低效率门限、发送定时的选取对网络实时性的影响。进一步完成硬件原型设计和仿真, 比较了软件仿真与硬件仿真的结果, 并分析该数据块填装算法的性能。     

A scheme of optical interconnection for super high speed parallel computer

An optical cross connection network which adopts coarse wavelength division multiplexing (CWDM) and data packet is introduced. It can be used to realize communication between multi-CPU and multi-MEM in parallel computing system. It provides an effective way to upgrade the capability of parallel computer by combining optical wavelength division multiplexing (WDM) and data packet switching technology. CWDM used in network construction, optical cross connection (OXC) based on optical switch arrays, and data packet format used in network construction were analyzed. We have also done the optimizing analysis of the number of optical switches needed in different scales of network in this paper. The architecture of the optical interconnection for 8 wavelength channels and 128 bits parallel transmission has been researched. Finally, a parallel transmission system with 4 nodes, 8 channels per node, has been designed.     

Performance analysis of a novel architecture for contention resolution of OPS

Optical packet switching (OPS) technology can rapidly deliver the enormous network bandwidth and offer high-speed data rate and format transparency. In this paper we propose a novel architecture using all-optical tunable wavelength converters (TWCs) and fiber delay-lines (FDLs) to address the contention problem for OPS in wavelength and time domains. This architecture improves packet switching speed but significantly decreases the number of optical switches comparing with existing architectures. A simulation is also conducted to evaluate the performance of the architecture. The simulation results show that the packet loss probability of this architecture is lower than general architectures.     

Hybrid OCS/OBS interconnect in intra-data-center network

We report on a data center network(DCN) architecture based on hybrid optical circuit switching(OCS) and optical burst switching(OBS) interconnect for dynamic DCN connectivity provisioning. With the combination of the centralized and distributed control of the software-defined optical networks, the proposed interconnect can achieve unprecedented flexibility in dealing with both mice and elephant flow in the DCN. Numerical simulation is employed to investigate the performance of the proposed architecture. The results show that the OBS module has preferable performance in dealing with a larger burst packet, and the throughput is constrained by the capacity of the server random access memory module.     

适用于光突发交换网的可编程光缓存器

提出了两种适用于光突发交换网的可编程光缓存器结构：交叉型和多端口开关型.两种结构都能满足突发包缓存的超长性和可变性的要求,且结构简单紧凑,成本低,可扩展.交叉型缓存器通过指定信号在每个子缓存模块的光纤环中的循环次数即能实现可变时间的延迟.多端口开关型缓存器通过指定信号在两个多端口开关相应端口与所接光纤延迟线组成的光纤环中的循环次数实现可变时间的延迟.仿真结果表明,两种可编程光缓存器都能对光突发包实现ns级指定时间延迟,可用于解决光突发交换网突发包的冲突问题.     

全光地址识别机理的研究

在面向分组业务的全光交换系统中,采用全光地址处理技术可以减少处理时延,大大提高信息处理速度和网络吞吐量,对全光网络的研究具有重要意义。分析了光正交码的自相关性与互相关性,并将其特性应用于全光传送网中,以针对未来基于光分组业务的全光环网为例,提出了一种光分插复用器的新型结构,给出了总体应用设计规则,重点研究和分析了全光地址识别机理和相关的应用设计方法,给出了针对全光环网组网规模的仿真分析结构和基本实验结果。结果表明采用所提出的设计原则和设计方法来实现全光地址识别是可行的。     

A New OPS Node Structure with WDM Time-Limited RAMs

Based on a new practical optical packet buffering method, a new Optical Packet Switching node structure is designed by us. This new node structure greatly reduces the complexity of the already-existing node structures by omiting the slot-selection stage.     

光突发交换中交换矩阵配置时间的影响研究

光突发交换是近几年出现的一种很有前途的交换技术。在光突发交换网络的核心节点中,光交换矩阵是一个关键部件,其配置时间影响到光突发交换网络的性能。这种影响表现在对数据信道可用时间施加了限制。在考虑光交换矩阵配置时间的基础上给出了修正后的LAUC算法,并通过计算机仿真研究了这种配置时间对光突发交换性能的影响。结果表明,光交换矩阵配置时间的增大会导致输出数据信道利用率的降低,进而增大了数据丢失率。     

An optimal burst assembly approach employing traffic shaping (OBATS) for OBS

Optical burst switching (OBS) aims at combining the strengths of packet and circuit switching and is considered as a promising technology for implementing the next generation optical Internet, required to cope with the rapid growth of Internet traffic and the increased deployment of new services. In this paper, an optimal burst assembly approach employing traffic shaping (OBATS) for OBS networks has been proposed in order to improve network performance in terms of reduced blocking probability, congestion control and better utilization of bandwidth. Particularly, the proposed scheme aims at reducing the average delay experienced by the packets during the burstification process in optical burst switched (OBS) networks, for a given average size of the bursts produced. Reducing the packet burstification delay, for a given average burst size, is essential for real-time applications; correspondingly, increasing the average burst size for a given packet burstification delay is important for reducing the number of bursts injected into the network and the associated overhead imposed on the core nodes. Simulation results show that the proposed burst assembly approach gives better network performance in terms of burst drop, resource contention and delay as compared to conventional burst assembly approaches.     

Fast restoration scheme for MPLS-TP enabled optical multicast

To improve the restoration performance of a multicast service of multi-protocol label switching transport profile （MPLS-TP） enabled optical network,this letter proposes a local-node initiated fast restoration （LNIFR） scheme for MPLS-TP optical multicast service.The proposed scheme allows the local node to establish a segment of fast loopback label switch path by the local node along the upstream of the failed node or link to the nearest downstream node.The fast restoration of optical multicast trees is realized through this part restoration,which focuses on failed node or link.Simulation analysis and results demonstrate that the new scheme outperforms the other schemes in terms of restoration time and success rate.     

AWG and EDFA based optical packet switch using feedback shared loop buffer memory

Optical packet switching provides high speed, data rate/format transparency, efficient use of bandwidth and flexibility. The major problem in the implementation of “all-optical” switching is contention which occurs when two or more packets arrive at the same time for the same destination. To resolve the contention, we have proposed an optical packet switch architecture based on WDM loop buffer memory in the feedback configuration. In that architecture, the contending packets are stored in a loop buffer module, and routed in the free time slots. The buffering duration in the recirculating loop is limited by a circulation limit. The analysis was been done to obtain the maximum number of allowed circulations. This paper proposes improved version of that optical packet switch architecture, to increase the number of maximum allowed circulations. The modification is done either by adding an extra erbium doped fiber amplifier (EDFA) in the original switch or by replacing the core space switch with arrayed waveguide grating (AWG). The performance analysis has been done by the simulations.     

基于最小化平均分组跳的分组交换多跳光网的设计

本文研究了支持分组交换通信的波长路由光网的逻辑拓扑设计问题,并将它表示为混合整数线性规划问题(MILP),其目标函数为最小化平均分组跳数目.在约束条件中同时考虑了分组传输时延和排队时延.我们以6结点的网络为例,对于不同的收发机数目和时延边界,数值结果表明最小化平均分组跳数目等价于最小化网络拥塞.小的平均分组跳数目可以保证网络通信时具有较小的时延.最后,对于不同的通信模式,我们比较分析了网格的优化性能参数,这些结果有助于提出更好的启发式算法.