Partially selective methanolysis of sebacic units in biodegradable multicomponent copolyesters

The composition and molar masses of equimolar multicomponent copolyesters, obtained from 1,4-butandiol and mixtures of succinic, adipic, sebacic, and terephthalic acids were characterized by ¹³C NMR, size exclusion chromatography (SEC), matrix assisted laser desorption ionization-time of flight mass spectroscopy (MALDI-TOF-MS), and viscosimetry. These copolyesters were subjected to partial methanolysis, and the composition and sequence of the oligomers obtained in the methanolysis were determined by the analysis of their fast atom bombardment (FAB-MS) mass spectra. The comparison of the composition data obtained by FAB-MS and ¹³C NMR indicates that for copolymers containing sebacic units the methanolysis is a partially selective process, and that oligomers containing sebacic units accumulate in the residue.     

Poly(amide ester)s from 2,6-pyridinedicarboxylic acid and ethanolamine derivatives: identification of macrocycles by matrix-assisted laser desorption/ionization mass spectrometry

The influence of the polycondensation pathway and aminoalcohol structure was investigated in the synthesis of poly(amide ester)s by polytransesterification from ethyl pyridine-2,6-dicarboxylate and 2-amino-2-methylpropan-1-ol or the corresponding bis(amide alcohol), or by polycondensation from the diacid dichloride. Both linear and cyclic structures were identified by steric exclusion chromatography (SEC) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). Transesterification led to cyclic oligomers (macrocycles) with 2-14 pyridine moities in the ring whereas polycondensation from the diacid dichloride gave low molecular weight polymers (Mn = 1800) and macrocycles.     

Synthesis and structural study of copolymers of l-lactic acid and bis(2-hydroxyethyl terephthalate)

Poly(ethylene terephthalate)-poly(lactic acid) (PET-PLLA) copolyesters were synthesized by the melt reaction of bis(2-hydroxyethyl terephthalate) (BHET) with l-lactic acid oligomers (OLLA) in the presence of SnCl₂, H₂O-p-toluene sulfonic acid, H₂O catalytic system. The ¹H and ¹³C NMR studies confirm the incorporation of lactate units in PET chains after reaction. Copolyesters containing nearly equimolar terephthalate/lactate ratio are not completely random and present some block-copolymer character, while the microstructure of PET-rich copolyesters is a random one. Due to a longer PET sequence length, the latter exhibit a melting point close to 210 °C while the other ones are amorphous. SEC/MALDI-TOF MS off-line coupling was used to obtain the absolute average molar masses of the copolyesters. The results indicate that the conventional polystyrene calibration method leads to a strong overestimation of PET-PLLA molar masses, while the determined by NMR is much closer to the SEC/MALDI value.     

SYNTHESIS, CHARACTERIZATION AND RING-OPENING POLYMERIZATION OF CYCLIC (ARYLENE PHOSPHONATE) OLIGOMERS

INTRODUCTIONThe use of cyclic oligomers as macrocyclic precursors for the preparation of high performance polymers byring-opening polymerization (ROP) has sparked much interest in recent years. It could produce a revolutionarychange in the preparation of advanced composite materials, and is of great importance in the polymerizationprocess yielding polymers such as the reinforced reactive injection model (RRIM) and the resin transfer model(RTM) etc. Within the last 10 years, the synthes…     

Structural characterization of synthetic poly(ester amide) from sebacic acid and 4-amino-1-butanol by matrix-assisted laser desorption ionization time-of-flight/time-of-flight tandem mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight/time-of-flight tandem mass spectrometry (MALDI-TOF/TOF-MS/MS) was employed to analyze a poly(ester amide) sample (PEA-Bu) from the melt condensation of sebacic acid and 4-amino-1-butanol. In particular, we investigated the fragmentation pathways, the ester/amide bond sequences and the structure of species derived from side reactions during the synthesis. MALDI-TOF/TOF-MS/MS analysis was performed on cyclic species and linear oligomers terminated by dicarboxyl groups, carboxyl and hydroxyl groups and diamino alcohol groups. The sodium adducts of these oligomers were selected as precursor ions. Different end groups do not influence the fragmentation of sodiated poly(ester amide) oligomers and similar series of product ions were observed in the MALDI-TOF/TOF-MS/MS spectra. According to the structures of the most abundant product ions identified, the main cleavages proceed through a beta-hydrogen-transfer rearrangement, leading to the selective scission of the --O--CH2-- bonds. Abundant product ions originating from --CH2--CH2-- (beta-gamma) bond cleavage in the sebacate moiety were also detected. Their formation should be promoted by the presence of an alpha,beta-unsaturated ester or amide end group. MALDI-TOF/TOF-MS/MS provided structural information concerning the ester/amide sequences in the polymer chains. In the MALDI-TOF/TOF-MS/MS spectra acquired, using argon as the collision gas, of cyclic species and linear oligomers terminated by diamino alcohol groups, product ions in the low-mass range, undetected in the mass spectra acquired using air as the collision gas, proved to be diagnostic and made it possible to establish the presence of random sequences of ester and amide bonds in the poly(ester amide) sample. Furthermore, MALDI-TOF/TOF-MS/MS provided useful information to clarify the structures of precursor ions derived from side reactions during the synthesis.     

Recent Advances in MALDI Mass Spectrometry of Polymers

Matrix-Assisted Laser Desorption/Ionization (MALDI) allows the identification of repeat units and end groups, the structural analysis of linear and cyclic oligomers, and the estimate of composition and sequence for copolymers. MALDI has also been applied to the measurement of molar mass distributions in polymers and to the study of thermal and oxidative processes in polymers. This paper illustrates the detection of self-association in macromolecules made by coupling MALDI and Size Exclusion Chromatography (SEC), the investigation of polymer oxidation phenomena, and the characterization of copolymers formed in the processing of reactive polymer blends.     

Determination by MALDI-TOF MS of the structures obtained from polytransesterification of diethyl 2,6-pyridinedicarboxylate and poly(ethylene glycol)

Polyesters from reaction of diethyl 2,6-pyridinedicarboxylate with poly(ethylene glycol) 1000 were synthesized through a polytransesterification process using titanium(IV) alkoxide as catalyst. The resulting polyesters were characterized by size-exclusion chromatography (SEC) and matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). The structures of the polyesters were established and revealed the formation of several cyclic and linear populations of varying size. Detailed analysis of the MALDI-TOF mass spectra of the obtained polyesters has revealed the presence of linear polycondensates bearing various end groups among which those attributed to an exchange reaction between alkyl groups of the catalyst and ester groups of the polycondensates.     

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry with size-exclusion chromatographic fractionation for structural characterization of synthetic aliphatic copolyesters

We report matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) and off-line coupling of size-exclusion chromatography with MALDI-TOFMS analysis (SEC/MALDI-TOFMS) methods for the detailed characterization of poly[(R,S)-3-hydroxybutyrate-co-L-lactic acid], P[(R,S)-3HB-co-LA], and poly[(R,S)-3-hydroxybutyrate-co-epsilon-caprolactone], P[(R,S)-3HB-co-CL], copolymer samples which are expected to be used in special medical application as scaffolds for cartilage and soft tissue engineering. The novel copolyesters contained randomly distributed (R,S)-3-hydroxybutyrate structural units, were synthesized by transesterification of the corresponding homopolymers, i.e. atactic poly[(R,S)-3-hydroxybutyrate], a-PHB, and poly(L-Lactide) (PLLA) or poly(epsilon-caprolactone) (PCL), respectively. The MS methods used for the characterization of the resulting polydisperse copolyester samples were supported by classical methods (NMR, SEC). The structures of individual copolyester macromolecules, including end-group chemical structures, were established using initially MALDI-TOFMS and then SEC/MALDI-TOFMS. The compositions of the copolyesters were determined by two methods, namely based on 1H NMR and MALDI-TOF spectra. The two sets of values showed good agreement. The sequence distribution was determined using the signal intensities of individual copolyester macromolecules, which appeared in MALDI-TOF mass spectra. Furthermore, sequence analysis gave information about the degree of transesterification. The copolyesters synthesized, with only one exception, were demonstrated to be almost random, which implies that the ester-ester exchange was close to completion.     

Size exclusion chromatography/mass spectrometry applied to the analysis of polysaccharides.

A novel method for analysing polysaccharide materials is described which employs size-exclusion chromatography (SEC) followed by detection by on-line electrospray ionisation mass spectrometry (ESI-MS) and off-line matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOFMS). It is demonstrated through SEC/ESI ion trap mass spectrometry that the formation of multiply charged oligomer ions, which bind up to five sodium cations, allows the rapid analysis of polysaccharide ions with molecular weights in excess of 9 kDa. MALDI spectra generated from fractionation of the effluent collected from the same SEC separation are shown to be in good agreement with the ESI spectra with respect to molecular weight distributions and types of ions generated. ESI and MALDI mass spectra of samples obtained from sequential graded ethanol precipitation and SEC fractionation of acid and enzymatically digested arabinoxylan polysaccharides show important structural differences between polysaccharide fragments. In addition, a comparison is made between the mass spectra of native and permethylated SEC-separated fragments of acid and enzymatically treated arabinogalactan. Linkage information of the permethylated arabinogalactan oligomers can be rapidly established through the use of on-line SEC/ESI-MS( n) experiments.     

Matrix-assisted laser desorption/ionisation mass spectrometry in the study of polycondensation of Ti(OBun)4 in the presence of Si(OEt)4

The hydrolysis-polycondensation behaviour of alcoholic solutions containing Si(OEt)4 and Ti(OBun)4, in different molar ratios (Si/Ti = 10-0.2), was analysed by laser desorption/ionisation (LDI) and matrix-assisted laser desorption/ionisation (MALDI) mass spectrometry. The solutions were prepared using operating conditions usually employed in the sol-gel synthesis of SiO2-TiO2 materials. In accord with the well-known procedures for controlling the different chemical reactivities of the alkoxides, the pre-hydrolysis of the slower reacting silicon ethoxide and the chelation by acetylacetone of the faster reacting titanium butoxide were performed before mass spectrometric analysis. While LDI-MS did not provide evidence for the presence of mixed Si-Ti species in samples obtained from these reactions, MALDI-MS of samples diluted with chloroform and using 2,5-dihydroxybenzoic acid (DHB) as matrix led to detection of various oligomers with different contents of Si and Ti atoms. The results suggest that the formation of Si-Ti mixed oligomers seems to be the favoured process, especially for solutions in which one of the two components is diluted.     

Molar mass of main-chain bile acid-based oligo-esters measured by SEC, MALDI-TOF spectrometry and NMR spectroscopy: a comparative study

Bile acid-based polymers are promising new materials for biomedical applications. The determination of their molar mass, as for other novel polymers, has been difficult, due to the lack of suitable standards for size exclusion chromatography (SEC). In order to solve this problem, a family of main-chain bile acid-based oligo-esters has been synthesized by acyclic diene metathesis to be used as analogues in such analysis. These oligomers have been characterized by SEC, MALDI-TOF mass spectrometry and NMR spectroscopy. The results show that SEC with polystyrene standards tends to overestimate the molar mass of these materials and that a correction factor between 0.50 and 0.60 should be used for more accuracy.     

Low molar mass poly(styrene-co-acrylic acid) amphiphilic block copolymers: synthesis and characterization

Low molar mass (∼ 4000) di- and triblock copolymers of styrene and tert-butyl acrylate were synthesized by atom transfer radical polymerization (ATRP) in bulk and solution conditions. A CuBr/N, N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) catalyst system in conjunction with an alkyl-halide initiator were used to control the synthesis of the polystyrene macroinitiator and the subsequent copolymerization with tert-butyl acrylate. Hydrolysis of the tert-butyl acrylate blocks to acrylic acid blocks in the presence of trifluoroacetic acid resulted in the formation of an amphiphilic block copolymer. Size exclusion chromatography (SEC) and matrix assisted laser desorption ionization - time of flight - mass spectrometry (MALDI-TOF-MS) were used to determine the molar mass and molar mass distribution of the polystyrene macroinitiators and the block copolymers. ¹H NMR was used to characterize the polystyrene macroinitiators and the block copolymers, and to confirm hydrolysis of the poly(tert-butyl acrylate) blocks to poly(acrylic acid).     

Modeling of the molar mass distribution of six-arm star-branched poly-epsilon-caprolactam using size-exclusion chromatography

This paper presents a modeling-based approach to the prediction of the molar mass distribution of the various species in a star-branched polycondensation mixture. The interpretation of experimental SEC data of the mixture of linear, cyclic and star-branched molecules is not straightforward, because of the different sizes of those molecules (having the same molecular mass). Therefore we have opted to use SEC analysis with only a concentration detector and fit the experimental data to the theoretical mass distribution, corrected for the volume of the various molecules. This allows the relative fraction and the distribution of the various species in the mixture (linear, cyclic and star-branched) to be determined. To demonstrate this, the six-arm star-branched poly-epsilon-caprolactam based on the six-functional coupling molecule, hexa(6-caproic acid) melamine has been analyzed. Five polymer mixtures with different initial concentration of coupling molecule have been synthesized. As the initial concentration of coupling molecule increased, we found that the weight fraction of star-branched molecules increased, while the weight fraction of linear and cyclic molecules decreased. We also found that the weight-average molar mass and the arm length decrease as the initial fraction of the coupling molecule increases.     

Structural characterization and sequence distributions of polysiloxanes using pyrolysis MS/MS

Novel polysiloxanes, with 4-(dialkylamino)pyridine substituents, are characterized by pyrolysis tandem mass spectrometry. These polymers form abundant cyclic oligomeric ions under both desorption electron ionization (DEI) and desorption chemical ionization (DCI) conditions. Product MS/MS spectra of the cyclic ions reveal characteristic fragmentations under low energy collision activated dissociation. Protonated cyclic oligomers higher than the pentamer are mainly due to the proton bound dimers of lower oligomeric units. The cyclic oligomers are shown to have proton affinities greater than 1000 kJ/mole. It is proposed that thermal depolymerization occurs through an intramolecular siloxane bond rearrangement, which is in agreement with a previously proposed "loop mechanism". Markovian statistical calculations are applied to the DCI mass spectral data in order to determine the sequence distribution of siloxane copolymers. Application of this method show that the monomers in the copolymers examined are non-randomly distributed.     

聚酰胺-聚ε-己内酯多嵌段共聚物合成、表征及反应动力学的研究

本文采用双羧基尼龙1010预聚物和双羟基聚δ-己内酯预聚物经熔融缩聚制得了不同嵌段链长度和不同软硬链段含量的尼龙1010-聚δ-己内酯多嵌段共聚物,并通过分子量(VPO)、核磁共振谱(¹HNMR)和热分析法(DSC)对该共聚物进行表征。同时,对尼龙1010和聚δ-已内酯熔融缩聚反应动力学作了研究。结果表明,该反应为二级反应,活化能为ΔΕ=58.2kcal/mol,反应常数K=1.36×10²²·e^-2.93×104/T。     

Combined techniques for the characterization of linear–hyperbranched hybrid poly(butylene adipate) copolymers

Linear–hyperbranched hybrid poly(butylene adipate) (HPBA) copolymers were synthesized through a branching reaction between the linear tailored prepolymer terminated with methyl ester groups and different mol percents of the 1,1,1‐tris(hydroxymethyl) propane (TMP) as branching agent, using the titanium(IV) isopropoxide as catalyst, at 180 °C under vacuum for different times. All samples were characterized by NMR and matrix assisted laser desorption/ionization time of flight mass spectrometry (MALDI‐TOF MS). In particular, MALDI‐TOF mass spectra of the unfractionated and size exclusion chromatography (SEC)‐fractionated hyperbranched (HB) samples gave information on their composition, on the end groups as well as on the TMP units present in each family of HB macromolecules. HB chains containing cyclic branches and ether bonds formed by intermolecular transesterification and intramolecular and intermolecular transetherification side reactions, respectively, were also revealed by MALDI‐TOF MS analysis. All samples were also investigated by SEC. The average molar masses (MMs) evaluated by SEC calibrated with the polystyrene (PS) narrow standards were overestimated with respect to those calculated by the SEC/MALDI‐TOF MS self‐ calibration method, which gave reliable values. Moreover, it also showed that the hydrodynamic volume of the HPBA polymers was higher than that of the linear PSs with similar MMs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

MALDI-TOF characterization of macromonomers

Methacryloyl endfunctionalized oligostyrene macromonomers were characterized by matrix assisted laser desorption ionization/time of flight (MALDI-TOF) spectroscopy and by isocratic and gradient high performance liquid chromatography (HPLC). The molar mass distribution derived by the different techniques coincide for the investigated oligomers. Mixing experiments revealed that the MALDI-TOF peak areas do not necessarily represent the mixing ratio of the components. Combination of gradient HPLC and MALDI-TOF has resolved the chemical composition of the coupling products formed by reaction of the living anion with oxygen.     

Biodegradable polymers with variable architectures via ring‐expansion polymerization

Kinetically controlled ring‐expansion polymerizations (REPs) are defined syntheses generating cyclic oligomers and polymers without linear intermediates and without equilibration reactions. This review reports syntheses of cyclic metal alkoxides and their use as initiators for REPs of lactones, cyclic diesters, and cyclocarbonates. In addition to homopolyesters, telechelic oligoesters or polyesters, random copolyesters, and A–B–A triblock copolymers can be prepared by these REPs. The in situ combination of REPs with condensation (mostly acylation) reactions allows a broad variation of end groups. The in situ combination of REPs with polycondensation enables various chain‐extension reactions, including the syntheses of multiblock copolymers. With spirocyclic initiators, four‐armed stars with functional end groups may be prepared. The in situ combination of REPs with condensation reactions of trifunctional or multifunctional reagents makes a broad variety of networks accessible. The average segment lengths may be controlled via the monomer/initiator ratios of the REP. All materials produced via the aforementioned REP processes are biodegradable and nontoxic, and this allows for biomedical and pharmaceutical applications. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4723–4742, 2004     

Hydrolytic degradation of copolymers based on l-lactic acid and bis-2-hydroxyethyl terephthalate

The current demand for environmentally degradable copolymers has led to the use of novel degradable copolyesters. A series of copolyesters based on bis-2-hydroxyethyl terephthalate and l-lactic acid oligomers were synthesized by melt polycondensation [Olewnik E, Czerwiński W, Nowaczyk J, Sepulchre M-O, Tessier M, Salhi S, et al. Synthesis and structural study of copolymers of l-lactic acid and bis(2-hydroxyethyl terephthalate). Eur Polym J, in press]. Hydrolytic degradation of copolymers containing 16.8-52.9 mole ratio of l-lactic acid units was carried out in two buffered solutions at two different temperatures: phosphate buffer solution (pH 7.40) at 45 °C and phosphate-citric buffer solution (pH 7.35) at 60 °C. Degradation of copolyesters was studied by incubating samples in powder form in a concentrated solution from 30 to 180 days.The copolymers were characterized by various analytical techniques. The thermal properties, morphology and structural changes during controlled hydrolysis were studied by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) for determining melting points, heats of melting and decomposition temperatures of investigated copolyesters. ¹H NMR spectroscopy was used to observe the decomposition of the polyesters.     

Negative ion mode matrix-assisted laser desorption/ionisation time-of-flight mass spectrometric analysis of oligosaccharides using halide adducts and 9-aminoacridine matrix

9-Aminoacridine was established as a matrix for the detection of neutral oligosaccharides in negative ion mode matrix-assisted laser desorption/ionisation time-of-flight (MALDI-TOF) mass spectrometry. Sodium iodide proved to be a useful additive inducing formation of stable iodide adducts of the analytes, in particular for oligosaccharides with a degree of polymerisation (DP) of three and higher. Lower oligomers (DP <3) and monosaccharides show more stable adducts with chloride ions. After optimisation of the sample preparation procedure, limits of quantitation were determined for alpha-cyclodextrin and cellopentaose at 7 and 13 pmol, respectively, with a linear detector response over two concentration orders. The iodide additive could be successfully employed on MALDI-TOF mass spectrometers with vacuum and atmospheric pressure ion sources. The value of the new method to solve biological problems has been demonstrated by the analysis of a mixture of beta-glucane elicitors isolated from the cell walls of Phytophthora sojae.