Synthesis of Monocyclic Hydroperoxy‐ and Hydroxy‐Substituted Sulfin‐ and Sulfonamides by Oxidation of 4,5‐Dimethylisothiazolium Salts

The isothiazolium salts 10 , easily accessible by cyclocondensation of the thiocyanates 8 with the anilines 9 , yielded with H₂O₂ as the oxidant the first stable hydroperoxides of the 2‐aryl‐2,3‐dihydroisothiazole 1‐oxides rac‐cis‐ 13 , the 1,1‐dioxides 15 , and their reduced 3‐hydroxy derivatives rac‐cis‐ 14 and 16 , respectively. The oxidation of 10 to new isothiazol‐3(2H)‐one 1,1‐dioxides ( 17 ) is also described. For the first time, an aryl‐bridged bis[isothiazolium salt] 11 was synthesized and oxidized.     

Analogues of α‐Campholenal (= (1R)‐2,2,3‐Trimethylcyclopent‐3‐ene‐1‐acetaldehyde) as Building Blocks for (+)‐β‐Necrodol (= (1S,3S)‐2,2,3‐Trimethyl‐4‐methylenecyclopentanemethanol) and Sandalwood‐like Alcohols

To complete our panorama in structure–activity relationships (SARs) of sandalwood‐like alcohols derived from analogues of α‐campholenal (= (1R)‐2,2,3‐trimethylcyclopent‐3‐ene‐1‐acetaldehyde), we isomerized the epoxy‐isopropyl‐apopinene (?)‐ 2d to the corresponding unreported α‐campholenal analogue (+)‐ 4d (Scheme 1). Derived from the known 3‐demethyl‐α‐campholenal (+)‐ 4a , we prepared the saturated analogue (+)‐ 5a by hydrogenation, while the heterocyclic aldehyde (+)‐ 5b was obtained via a Bayer‐Villiger reaction from the known methyl ketone (+)‐ 6 . Oxidative hydroboration of the known α‐campholenal acetal (?)‐ 8b allowed, after subsequent oxidation of alcohol (+)‐ 9b to ketone (+)‐ 10 , and appropriate alkyl Grignard reaction, access to the 3,4‐disubstituted analogues (+)‐ 4f,g following dehydration and deprotection. (Scheme 2). Epoxidation of either (+)‐ 4b or its methyl ketone (+)‐ 4h , afforded stereoselectively the trans‐epoxy derivatives 11a,b , while the minor cis‐stereoisomer (+)‐ 12a was isolated by chromatography (trans/cis of the epoxy moiety relative to the C₂ or C₃ side chain). Alternatively, the corresponding trans‐epoxy alcohol or acetate 13a,b was obtained either by reduction/esterification from trans‐epoxy aldehyde (+)‐ 11a or by stereoselective epoxidation of the α‐campholenol (+)‐ 15a or of its acetate (?)‐ 15b , respectively. Their cis‐analogues were prepared starting from (+)‐ 12a . Either (+)‐ 4h or (?)‐ 11b , was submitted to a Bayer‐Villiger oxidation to afford acetate (?)‐ 16a . Since isomerizations of (?)‐ 16 lead preferentially to β‐campholene isomers, we followed a known procedure for the isomerization of (?)‐epoxyverbenone (?)‐ 2e to the norcampholenal analogue (+)‐ 19a . Reduction and subsequent protection afforded the silyl ether (?)‐ 19c , which was stereoselectively hydroborated under oxidative condition to afford the secondary alcohol (+)‐ 20c . Further oxidation and epimerization furnished the trans‐ketone (?)‐ 17a , a known intermediate of either (+)‐β‐necrodol (= (+)‐(1S,3S)‐2,2,3‐trimethyl‐4‐methylenecyclopentanemethanol; 17c ) or (+)‐(Z)‐lancifolol (= (1S,3R,4Z)‐2,2,3‐trimethyl‐4‐(4‐methylpent‐3‐enylidene)cyclopentanemethanol). Finally, hydrogenation of (+)‐ 4b gave the saturated cis‐aldehyde (+)‐ 21 , readily reduced to its corresponding alcohol (+)‐ 22a . Similarly, hydrogenation of β‐campholenol (= 2,3,3‐trimethylcyclopent‐1‐ene‐1‐ethanol) gave access via the cis‐alcohol rac‐ 23a , to the cis‐aldehyde rac‐ 24 .     

1,5‐Dipolar Electrocyclizations of Thiocarbonyl Ylides Bearing CN Groups: Reactions of N‐[(Dimethylamino)methylene]thiobenzamide and 2‐(Dimethylhydrazono)‐1‐phenylethane‐1‐thione with Diazo Compounds

The reactions of thiobenzamide 8 with diazo compounds proceeded via reactive thiocarbonyl ylides as intermediates, which underwent either a 1,5‐dipolar electrocyclization to give the corresponding five membered heterocycles, i.e., 4‐amino‐4,5‐dihydro‐1,3‐thiazole derivatives (i.e., 10a, 10b, 10c , cis‐ 10d , and trans‐ 10d ) or a 1,3‐dipolar electrocyclization to give the corresponding thiiranes as intermediates, which underwent a S_Ni′‐like ring opening and subsequent 5‐exo‐trig cyclization to yield the isomeric 2‐amino‐2,5‐dihydro‐1,3‐thiazole derivatives (i.e., 11a, 11b, 11c , cis‐ 11d , and trans‐ 11d ). In general, isomer 10 was formed in higher yield than isomer 11 . In the case of the reaction of 8 with diazo(phenyl)methane ( 3d ), a mixture of two pairs of diastereoisomers was formed, of which two, namely cis‐ 10d and trans‐ 10d , could be isolated as pure compounds. The isomers cis‐ 11d and trans‐ 11d remained as a mixture. In the reactions of the thioxohydrazone 9 with diazo compounds 3b and 3d , the main products were the alkenes 18 and 23 , respectively. Their formation was rationalized by a 1,3‐dipolar electrocyclization of the corresponding thiocarbonyl ylide and subsequent desulfurization of the intermediate thiiran. As minor products, 2,5‐dihydro‐1,3‐thiazol‐5‐amines 21 and 24 were obtained, which have been formed by 1,5‐dipolar electrocyclization of the thiocarbonyl ylide, followed by a 1,3‐shift of the dimethylamino group.     

Thermal [2+3]‐Cycloadditions of trans‐1‐Methyl‐2,3‐diphenylaziridine with CS and CC Dipolarophiles: An Unexpected Course with Dimethyl Dicyanofumarate

The thermal reaction of trans‐1‐methyl‐2,3‐diphenylaziridine (trans‐ 1a ) with aromatic and cycloaliphatic thioketones 2 in boiling toluene yielded the corresponding cis‐2,4‐diphenyl‐1,3‐thiazolidines cis‐ 4 via conrotatory ring opening of trans‐ 1a and a concerted [2+3]‐cycloaddition of the intermediate (E,E)‐configured azomethine ylide 3a (Scheme 1). The analogous reaction of cis‐ 1a with dimethyl acetylenedicarboxylate ( 5 ) gave dimethyl trans‐2,5‐dihydro‐1‐methyl‐2,5‐diphenylpyrrole‐3,4‐dicarboxylate (trans‐ 6 ) in accord with orbital‐symmetry‐controlled reactions (Scheme 2). On the other hand, the reactions of cis‐ 1a and trans‐ 1a with dimethyl dicyanofumarate ( 7a ), as well as that of cis‐ 1a and dimethyl dicyanomaleate ( 7b ), led to mixtures of the same two stereoisomeric dimethyl 3,4‐dicyano‐1‐methyl‐2,5‐diphenylpyrrolidine‐3,4‐dicarboxylates 8a and 8b (Scheme 3). This result has to be explained via a stepwise reaction mechanism, in which the intermediate zwitterions 11a and 11b equilibrate (Scheme 6). In contrast, cis‐1,2,3‐triphenylaziridine (cis‐ 1b ) and 7a gave only one stereoisomeric pyrrolidine‐3,4‐dicarboxylate 10 , with the configuration expected on the basis of orbital‐symmetry control, i.e., via concerted reaction steps (Scheme 10). The configuration of 8a and 10 , as well as that of a derivative of 8b , were established by X‐ray crystallography.     

Enzyme‐Mediated Preparation of (+)‐ and (−)‐β‐Irone and (+)‐ and (−)‐cis‐γ‐Irone from Irone alpha®

The (−)‐ and (+)‐β‐irones ((−)‐ and (+)‐ 2 , resp.), contaminated with ca. 7 – 9% of the (+)‐ and (−)‐trans‐α‐isomer, respectively, were obtained from racemic α‐irone via the 2,6‐trans‐epoxide (±)‐ 4 (Scheme 2). Relevant steps in the sequence were the LiAlH₄ reduction of the latter, to provide the diastereoisomeric‐4,5‐dihydro‐5‐hydroxy‐trans‐α‐irols (±)‐ 6 and (±)‐ 7 , resolved into the enantiomers by lipase‐PS‐mediated acetylation with vinyl acetate. The enantiomerically pure allylic acetate esters (+)‐ and (−)‐ 8 and (+)‐ and (−)‐ 9 , upon treatment with POCl₃/pyridine, were converted to the β‐irol acetate derivatives (+)‐ and (−)‐ 10 , and (+)‐ and (−)‐ 11 , respectively, eventually providing the desired ketones (+)‐ and (−)‐ 2 by base hydrolysis and MnO₂ oxidation. The 2,6‐cis‐epoxide (±)‐ 5 provided the 4,5‐dihydro‐4‐hydroxy‐cis‐α‐irols (±)‐ 13 and (±)‐ 14 in a 3 : 1 mixture with the isomeric 5‐hydroxy derivatives (±)‐ 15 and (±)‐ 16 on hydride treatment (Scheme 1). The POCl₃/pyridine treatment of the enantiomerically pure allylic acetate esters, obtained by enzymic resolution of (±)‐ 13 and (±)‐ 14 , provided enantiomerically pure cis‐α‐irol acetate esters, from which ketones (+)‐ and (−)‐ 22 were prepared (Scheme 4). The same materials were obtained from the (9S) alcohols (+)‐ 13 and (−)‐ 14 , treated first with MnO₂, then with POCl₃/pyridine (Scheme 4). Conversely, the dehydration with POCl₃/pyridine of the enantiomerically pure 2,6‐cis‐5‐hydroxy derivatives obtained from (±)‐ 15 and (±)‐ 16 gave rise to a mixture in which the γ‐irol acetates 25a and 25b and 26a and 26b prevailed over the α‐ and β‐isomers (Scheme 5). The (+)‐ and (−)‐cis‐γ‐irones ((+)‐ and (−)‐ 3 , resp.) were obtained from the latter mixture by a sequence involving as the key step the photochemical isomerization of the α‐double bond to the γ‐double bond. External panel olfactory evaluation assigned to (+)‐β‐irone ((+)‐ 2 ) and to (−)‐cis‐γ‐irone ((−)‐ 3 ) the strongest character and the possibility to be used as dry‐down note.     

Separation,interconversion, and insecticidal activity of the cis‐ and trans‐isomers of novel hydrazone derivatives

A series of cis‐ and trans‐isomers of hydrazone derivatives were separated and analyzed through HPLC with diode‐array detection and HPLC‐MS/MS using ESI and ion trap MS. Two single crystals (A‐5‐1 and C‐2‐1) of the trans‐isomers were obtained and determined using X‐ray crystallography data, and the cis‐ to trans‐isomerization under different conditions was discussed. Both of the cis‐ and trans‐isomers of A‐4 and A‐5 exhibited good insecticidal activities against Plutella xylostella.     

New Studies on [2+3] Cycloadditions of Thermally Generated N‐Isopropyl‐ and N‐(4‐Methoxyphenyl)‐Substituted Azomethine Ylides

The thermal reaction of 1‐substituted 2,3‐diphenylaziridines 2 with thiobenzophenone ( 6a ) and 9H‐fluorene‐9‐thione ( 6b ) led to the corresponding 1,3‐thiazolidines (Scheme 2). Whereas the cis‐disubstituted aziridines and 6a yielded only trans‐2,4,5,5‐tetraphenyl‐1,3‐thiazolidines of type 7 , the analogous reaction with 6b gave a mixture of trans‐ and cis‐2,4‐diphenyl‐1,3‐thiazolidines 7 and 8 . During chromatography on SiO₂, the trans‐configured spiro[9H‐fluorene‐9,5′‐[1,3]thiazolidines] 7c and 7d isomerized to the cis‐isomers. The substituent at N(1) of the aziridine influences the reaction rate significantly, i.e., the more sterically demanding the substituent the slower the reaction. The reaction of cis‐2,3‐diphenylaziridines 2 with dimethyl azodicarboxylate ( 9 ) and dimethyl acetylenedicarboxylate ( 11 ) gave the trans‐cycloadducts 10 and 12 , respectively (Schemes 3 and 4). In the latter case, a partial dehydrogenation led to the corresponding pyrroles. Two stereoisomeric cycloadducts, 15 and 16 , with a trans‐relationship of the Ph groups were obtained from the reaction with dimethyl fumarate ( 14 ; Scheme 5); with dimethyl maleate ( 17 ), the expected cycloadduct 18 together with the 2,3‐dihydropyrrole 19 was obtained (Scheme 6). The structures of the cycloadducts 7b, 8a, 15b , and 16b were established by X‐ray crystallography.     

Unexpected Formation of Dimethylthioketene Cycloadducts in the Reaction of 1,3‐Diphenylaziridine‐2,2‐dicarboxylate with Cyclobutanethione Derivatives

The reaction of 2,2,4,4‐tetramethyl‐3‐thioxocyclobutanone ( 1 ) with cis‐1‐alkyl‐2,3‐diphenylaziridines 5 in boiling toluene yielded the expected trans‐configured spirocyclic 1,3‐thiazolidines 6 (Scheme 1). Analogously, dimethyl trans‐1‐(4‐methoxyphenyl)aziridine‐2,3‐dicarboxylate (trans‐ 7 ) reacted with 1 and the corresponding dithione 2 , respectively, to give spirocyclic 1,3‐thiazolidine‐2,4‐dicarboxylates 8 (Scheme 2). However, mixtures of cis‐ and trans‐derivatives were obtained in these cases. Unexpectedly, the reaction of 1 with dimethyl 1,3‐diphenylaziridine‐2,2‐dicarboxylate ( 11 ) led to a mixture of the cycloadduct 13 and 5‐(isopropylidene)‐4‐phenyl‐1,3‐thiazolidine‐2,2‐dicarboxylate ( 14 ), a formal cycloadduct of azomethine ylide 12 with dimethylthioketene (Scheme 3). The regioisomeric adduct 16 was obtained from the reaction between 2 and 11 . The structures of 6b , cis‐ 8a , cis‐ 8b, 10 , and 16 have been established by X‐ray crystallography.     

Fused‐ring nitrogen and sulfur heterocycles by a tandem SN2‐michael addition reaction

A tandem S_N2‐Michael addition reaction has been developed for the synthesis of cis‐ and trans‐fused nitrogen and sulfur heterocycles from the cis and trans isomers of ethyl (±)‐(2E)‐3‐[2‐(iodomethyl)cyclo‐hexyl]‐2‐propenoate. Octahydro‐1H‐isoindole‐1‐acetic acid and octahydrobenzo[c]thiophene‐1‐acetic acid derivatives have been prepared and their stereochemistries elucidated using NMR and X‐ray crystallo‐graphic methods. Cyclization substrates for both the cis‐ and the trans‐fused rings are readily available in four steps from known compounds. Yields for the cyclization range from 80‐85% and stereochemical selec‐tivities with respect to the side chain vary from 12.5‐16:1 for the cis‐fused structures to 6‐7.5:1 for the trans‐fused structures. Steric interactions in the transition states for ring closure are proposed to rationalize the observed preferences.     

1,3‐Thiazolidine‐dicarboxylates from Thioketones and Thermally Generated Azomethine Ylides

The reaction of 9H‐fluorene‐9‐thione ( 1 ) with the cis‐ and trans‐isomers of dimethyl 1‐(4‐methoxyphenyl)aziridine‐2,3‐dicarboxylate (cis‐ and trans‐ 2 , resp.) in xylene at 110° yielded exclusively the spirocyclic cycloadduct with trans‐ and cis‐configurations, respectively (trans‐ and cis‐ 3 , resp.; Scheme 1). Analogously, less‐reactive thioketones, e.g., thiobenzophenone ( 5 ), and cis‐ 2 reacted stereoselectively to give the corresponding trans‐1,3‐thiazolidine‐2,4‐dicarboxylate (e.g., trans‐ 8 ; Scheme 2). On the other hand, the reaction of 5 and trans‐ 2 proceeded in a nonstereoselective course to provide a mixture of trans‐ and cis‐substituted cycloadducts. This result can be explained by an isomerization of the intermediate azomethine ylide. Dimethyl 1,3‐thiazolidine‐2,2‐dicarboxylates 14 and 15 were formed in the thermal reaction of dimethyl aziridine‐2,2‐dicarboxylate 11 with aromatic thioketones (Scheme 3). On treatment of 14 and 15 with Raney‐Ni in refluxing EtOH, a desulfurization and ring‐contraction led to the formation of azetidine‐2,2‐dicarboxylates 17 and 18 , respectively (Scheme 4).     

Lanthanide Coordination Polymers Constructed from Infinite Rod‐Shaped Secondary Building Units and Flexible Ligands

Three lanthanide coordination polymers constructed from infinite rod‐shaped secondary building units (SBUs), [Nd₂(H₂O)₂(cis‐chdc)₂(trans‐chdc)]?2H₂O ( 1 ), Nd₂(H₂O)₄(trans‐chdc)₃ ( 2 ), and [Sm₂(H₂O)₂(cis‐chdc)(trans‐chdc)₂]?4H₂O ( 3 ) (chdcH₂=1,4‐cyclohexanedicarboxylic acid), were hydrothermally synthesized and structurally characterized. The structures of 1 – 3 are modulated by different ratios of the cis and trans configurations of chdc^2? ligands, which was achieved by temperature control in the hydrothermal reactions. Crystal‐structure analysis revealed that 1 is a four‐connected pcu‐type rod packing network built from cross‐linking of rod‐shaped neodymium–oxygen SBUs by cis‐ and trans‐chdc^2? ligands in a 2:1 ratio, 2 displays a complicated six‐connected hex‐type rod packing structure built by connection of rod‐shaped neodymium–oxygen SBUs and trans‐chdc^2? ligands, and 3 features an unprecedented five‐connected rod packing pattern constructed from rod‐shaped samarium–oxygen SBUs and cis‐ and trans‐chdc^2? ligands in a 1:2 ratio.     

Synthesis and transformations of stereoisomeric ethyl 2‐isothiocyanato‐1‐cyclopentanecarboxylatesm

Ethyl vis‐ and trans‐2‐isothiocyanato‐1‐cyclopentanecarboxylates 2 and 7 were prepared by the reaction of the corresponding alicyclic ethyl 2‐amino‐1‐carboxylates and thiophosgene. The cis‐isothiocyanato compound 2 underwent ring closure with amines in one or two steps, resulting in 3‐substituted‐cis‐2‐thioxocyclopenta[d]pyrimidin‐4‐ones 3a‐g. The trans isomer 7 failed to cyclize, but gave carboxamide 8a,b or thiourea ester derivatives 9a,b.     

Nickel‐Catalyzed Stereospecific C−H Coupling of Benzamides with Epoxides

A Ni(OAc)₂‐catalyzed C?H coupling of 8‐aminoquinoline‐derived benzamides with epoxides has been developed. The reaction proceeds with concomitant removal of the 8‐aminoquinoline auxiliary to form the corresponding 3,4‐dihydroisocoumarins directly. Additionally, the nickel catalysis is stereospecific, and the cis‐ and trans‐epoxides are converted into the corresponding cis‐ and trans‐dihydroisocoumarins with retention of configuration, which is complementary to previously reported palladium catalysis. Moreover, while still preliminary, the C ?H functionalization is also achieved in the presence of modified NiCl₂ catalysts.     

Polymerization of 2‐pentene with Ni(II) α‐diimine complex/M‐MAO catalyst and structure of the polymer

Polymerization of 2‐pentene with [ArN?C(An)C(An)·NAr)NiBr₂ (Ar?2,6‐iPr₂C₆H₃)] ( 1‐Ni) /M‐MAO catalyst was investigated. A reactivity between trans‐2‐pentene and cis‐2‐pentene on the polymerization was quite different, and trans‐2‐pentene polymerized with 1‐Ni /M‐MAO catalyst to give a high molecular weight polymer. On the other hand, the polymerization of cis‐2‐butene with 1‐Ni /M‐MAO catalyst did not give any polymeric products. In the polymerization of mixture of trans‐ and cis‐2‐pentene with 1‐Ni /M‐MAO catalyst, the M_n of the polymer increased with an increase of the polymer yields. However, the relationship between polymer yield and the M_n of the polymer did not give a strict straight line, and the M_w/M_n also increased with increasing polymer yield. This suggests that side reactions were induced during the polymerization. The structures of the polymer obtained from the polymerization of 2‐ pentene with 1‐Ni /M‐MAO catalyst consists of ? CH₂? CH₂? CH(CH₂CH₃)? , ? CH₂? CH₂? CH₂? CH(CH₃)? , ? CH₂? CH(CH₂CH₂CH₃)? , and methylene sequence ? (CH₂)_n? (n ≥ 5) units, which is related to the chain walking mechanism. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2858–2863, 2008     

Analogues of Cis‐ and Transplatin with a Rich Solution Chemistry: cis‐[PtCl2(NH3)(1‐MeC‐N3)] and trans‐[PtI2(NH3)(1‐MeC‐N3)]

Mono(nucleobase) complexes of the general composition cis‐[PtCl₂(NH₃)L] with L=1‐methylcytosine, 1‐MeC ( 1 a ) and L=1‐ethyl‐5‐methylcytosine, as well as trans‐[PtX₂(NH₃)(1‐MeC)] with X=I ( 5 a ) and X=Br ( 5 b ) have been isolated and were characterized by X‐ray crystallography. The Pt coordination occurs through the N3 atom of the cytosine in all cases. The diaqua complexes of compounds 1 a and 5 a , cis‐[Pt(H₂O)₂(NH₃)(1‐MeC)]²⁺ and trans‐[Pt(H₂O)₂(NH₃)(1‐MeC)]²⁺, display a rich chemistry in aqueous solution, which is dominated by extensive condensation reactions leading to μ‐OH‐ and μ‐(1‐MeC^?‐N3,N4)‐bridged species and ready oxidation of Pt to mixed‐valence state complexes as well as diplatinum(III) compounds, one of which was characterized by X‐ray crystallography: h,t‐[{Pt(NH₃)₂(OH)(1‐MeC^?‐N3,N4)}₂](NO₃)₂ ? 2 [NH₄](NO₃) ? 2 H₂O. A combination of ¹H NMR spectroscopy and ESI mass spectrometry was applied to identify some of the various species present in solution and the gas phase, respectively. As it turned out, mass spectrometry did not permit an unambiguous assignment of the structures of +1 cations due to the possibilities of realizing multiple bridging patterns in isomeric species, the occurrence of different tautomers, and uncertainties regarding the Pt oxidation states. Additionally, compound 1 a was found to have selective and moderate antiproliferative activity for a human cervix cancer line (SISO) compared to six other human cancer cell lines.     

The Reaction of 2‐X‐1, 2‐Difluoroalk‐1‐enyldifluoroboranes with Xenon Difluoride. A Methodical Approach to 1, 2‐Difluoroalk‐1‐enylxenon(II) Salts

2‐X‐1, 2‐Difluoroalk‐1‐enylxenon(II) salts were prepared by the reaction of XeF₂ with XCF=CFBF₂ (X = F, trans‐H, cis‐Cl, trans‐Cl, cis‐CF₃, cis‐C₂F₅) but no organoxenon(II) compounds were obtained when the trans‐isomers of boranes, trans‐XCF=CFBF₂ (X = CF₃, C₄F₉, C₄H₉, Et₃Si), were used under similar conditions.     

Coordination‐Driven Macrocyclization for Locking of Photo‐ and Thermal cis→trans Isomerization of Azobenzene

Both trans and cis isomers of azobenzene‐linked bis‐terpyridine ligand L1 were incorporated in rigid macrocycles linked by Fe^II(tpy)₂ (tpy: terpyridine) units. The complex of the longer trans‐ L1 is dinuclear [(trans‐ L1 )₂ ? Fe^II₂], whereas the complex of the shorter cis‐ L1 is mononuclear [cis‐ L1? Fe^II]. The complex cis‐ L1? Fe^II was not only thermally stable but also photochemically inactive. These results indicate a perfectly locked state of cis‐azobenzene. The stable macrocyclic structure of cis‐ L1? Fe^II causes locking of the isomerization. To the best of our knowledge, this is first example of dual locking of photo‐ and thermal isomerization of cis‐azobenzene.     

Redox Non‐Innocence and Isomer‐Specific Oxidative Functionalization of Ruthenium‐Coordinated β‐Ketoiminate

This article deals with isomeric ruthenium complexes [Ru^III(L^R)₂(acac)] (S=1/2) involving unsymmetric β‐ketoiminates (AcNac) (L^R=R‐AcNac, R=H ( 1 ), Cl ( 2 ), OMe ( 3 ); acac=acetylacetonate) [R=para‐substituents (H, Cl, OMe) of N‐bearing aryl group]. The isomeric identities of the complexes, cct (cis‐cis‐trans, blue, a ), ctc (cis‐trans‐cis, green, b ) and ccc (cis‐cis‐cis_, pink, c ) with respect to oxygen (acac), oxygen (L) and nitrogen (L) donors, respectively, were authenticated by their single‐crystal X‐ray structures and spectroscopic/electrochemical features. One‐electron reversible oxidation and reduction processes of 1 – 3 led to the electronic formulations of [Ru^III(L)(L ^? )(acac)]⁺ and [Ru^II(L)₂(acac)]^? for 1 ⁺‐ 3 ⁺ (S=1) and 1^? – 3^? (S=0), respectively. The triplet state of 1 ⁺‐ 3 ⁺ was corroborated by its forbidden weak half‐field signal near g≈4.0 at 4 K, revealing the non‐innocent feature of L. Interestingly, among the three isomeric forms ( a – c in 1 – 3 ), the ctc ( b in 2 b or 3 b ) isomer selectively underwent oxidative functionalization at the central β‐carbon (C?H→C=O) of one of the L ligands in air, leading to the formation of diamagnetic [Ru^II(L)(L ′ )(acac)] (L ′ =diketoimine) in 4 / 4′ . Mechanistic aspects of the oxygenation process of AcNac in 2 b were also explored via kinetic and theoretical studies.     

Diborylated Magnesium Anthracene as Precursor for B2H5−‐Bridged 9,10‐Dihydroanthracene

9,10‐(Bpin)₂‐anthracene ( 3 , HBpin=pinacolborane) was synthesized from 9,10‐dibromoanthracene in a stepwise lithiation/borylation sequence. The reaction of 3 with highly activated magnesium furnished the diborylated magnesium anthracene 4 , which was quenched in situ with ethereal HCl to yield cis‐9,10‐(Bpin)₂‐DHA (cis‐ 5 , DHA=9,10‐dihydroanthracene). Compound cis‐ 5 , in turn, can be reduced with Li[AlH₄] in THF to give its diborate Li₂[cis‐9,10‐(BH₃)₂‐DHA] (Li₂[cis‐ 6 ]). In the crystal lattice, the THF solvate Li₂[cis‐ 6 ] ? 3 THF establishes a dimeric structure with Li‐(μ‐H)‐B coordination modes. Hydride abstraction from Li₂[cis‐ 6 ] with Me₃SiCl yields the B?H?B‐bridged DHA Li[ 7 ]. This product can also be viewed as a unique cyclic B₂H₇^? derivative with a hydrocarbon backbone. Treatment of Li₂[cis‐ 6 ] with the stronger hydride abstracting agent Me₃SiOTf (HOTf=trifluoromethanesulfonic acid) in THF affords the THF diadduct of cis‐9,10‐(BH(OTf))₂‐DHA.     

Synthesis of the Active Stilbenoids by Photooxidation Reaction of trans-ε-Viniferin

Two new stilbenoids, cis‐?‐viniferin (3) and 2b, 14b‐dehydro‐bisresveratrol (4) were synthesized by photooxidation reaction of trans‐?‐viniferin (2) prepared from tram‐resveratrol (1). Pentamethoxyl trans‐?‐viniferin (5) and pentamethoxyl cis‐?‐viniferin (6) were also obtained by methylation of trans‐?‐viniferin (2) with (MeO)₂SO₂. Their structures were elucidated on the basis of spectral evidence. Compounds 3 and 4 showed potent inhibition of TNF‐α at concentrations of 10^?‐⁵ mol.L^?1 with inhibitory ratios of 51.43% and 36.64%. respectively.