Simple and low-cost electrochemical sensor based on nickel nanoparticles for the determination of cabergoline

Cabergoline (CAB) is an ergot alkaloid derivative with dopamine agonist activity. In this work for the first time the electrocatalytic oxidation of CAB was carried out with nickel nanoparticles-modified carbon paste electrode using cyclic voltammetry, chronoamperometry, chronocoulometry and amperometry methods. At first, nickel nanoparticles were synthesized by non-aqueous polyol method and these nanoparticles were mixed with graphite powder to form modified carbon paste electrode. The resulting modified electrode was characterized by scanning electron microscope images. In the presence of 0.1 M NaOH a good redox behavior of the Ni(III)/Ni(II) couple at the surface of the electrode can be observed. CAB was successfully oxidized at the surface of the modified electrode. The electrocatalytic oxidation peak current of this drug was linearly dependent on its concentration. The proposed sensor exhibited a high sensitivity and was successfully applied for the determination of CAB in real samples.     

Characterization of the Ni(III) intermediate in the reaction of (1,4,8,11-tetraazacyclotetradecane)nickel(II) perchlorate with KHSO5: implications to the mechanism of oxidative DNA modification

We report the detection and characterization of the Ni(III) intermediates generated by reaction of (1,4,8,11-tetraazacyclotetradecane)nickel(II) perchlorate with KHSO5. Four Ni(III) intermediates can be trapped or detected through variation in Cl- or KHSO5 concentrations. Upon oxidation of [Ni(cyclam)]2+ by 2.5 equiv of KHSO5, deprotonation of the cyclam ligand generates two red Ni(III) species with lambda max = 530 nm and g perpendicular = 2.20 and g parallel = 2.02 or g perpendicular = 2.16 and g parallel = 2.01 for the axial 4-coordinate or 6-coordinate dichloride species, respectively. These forms decay to Ni(II) products via complex ligand oxidation mechanisms. The Ni(III) dichloride species can be reprotonated and subsequently binds to DNA via an outer-sphere interaction as evidenced by the inverted sign of the CD signal near 400 nm. Cumulatively, the results indicate that the Ni(III) center is coordinately saturated under excess chloride conditions but is still able to interact with DNA substrates. This suggests alternative mechanistic pathways for DNA modification by reaction of [Ni(cyclam)]2+ with KHSO5 and possibly other Ni(II) complexes as well.     

Electrochemical and spectroscopic studies of metal cyclam complexes with thiocyanate. Evidence for mixed ligand complex formation

Complexes of Ni^II, Co^II and Cu^II containing the macrocyclic ligand, 1,4,8,11-tetraazacyclotetradecane (cyclam), and their ability to form mixed ligand complexes with thiocyanate have been studied. These complexes in a 1:2 mole ratio, exhibit new absorption peaks at 450, 538 and 512 nm respectively. Addition of thiocyanate to the nickel–cyclam complex (1:2:5 mole ratio) led to the formation of a purple complex, exhibiting three distinct new absorption peaks at 330, 455 and 662 nm. A purple complex (1:2:10 mole ratio) separated, having absorption peaks at 352, 503 and 693 nm in CHCl₃. The Co^II–cyclam complex with thiocyanate in the same mole ratio exhibits two absorption peaks at 437 and 519 nm without appearance of any precipitate. The Cu^II–cyclam complex with thiocyanate did not form a mixed ligand complex. Electrochemical studies also confirmed the complex formation of Ni^II–cyclam with the thiocyanate with the appearance of two new oxidation peaks close to 1.25 and 1.60 V versus Ag/AgCl in H₂O and CHCl₃. The Co^II–cyclam complex with thiocyanate exhibited an oxidation peak at 1.2 V versus Ag/AgCl, while no peak was observed for the Cu^II–cyclam complex with thiocyanate. Based on spectroscopic and electrochemical studies the geometry of the complex has been evaluated.     

Investigation of Methanol Behavior at the Designed Electrochemical Sensor based on Ni(II) Complex and Graphene Nanosheets

In this work, the electrochemical oxidation of methanol was investigated by different electrochemical methods at a carbon paste electrode (CPE) modified with (N‐5‐methoxysalicylaldehyde, N´‐2‐hydroxyacetophenon‐1, 2 phenylenediimino nickel(II) complex (Ni(II)–MHP) and reduced graphene oxide (RGO), which is named Ni(II)‐MHP/RGO/CPE, in an alkaline solution. This modified electrode was found to be efficient for the oxidation of methanol. It was found that methanol was oxidized by the NiOOH groups generated by further electrochemical oxidation of nickel(II) hydroxide on the surface of the modified electrode. Under optimum conditions, some parameters of the analyte (MeOH), such as the electron transfer coefficient (α), the electron transfer rate constant) k_s), and the diffusion coefficient of species in a 0.1 M solution (pH = 13), were determined. The designed sensor showed a linear dynamic range of 2.0–100.0 and 100.0–1000.0 μM and a detection limit of 0.68 μM for MeOH determination. The Ni(II)‐MHP/RGO/CPE sensor was used in the determination of MeOH in a real sample.     

Coordination of methyl coenzyme M and coenzyme M at divalent and trivalent nickel cyclams: model studies of methyl coenzyme M reductase active site

Divalent and trivalent nickel complexes of 1,4,8,11-tetraazacyclotetradecane, denoted as cyclam hereafter, coordinated by methyl coenzyme M (MeSCoM(-)) and coenzyme M (HSCoM(-)) have been synthesized in the course our model studies of methyl coenzyme M reductase (MCR). The divalent nickel complexes Ni(cyclam)(RSCoM)(2) (R = Me, H) have two trans-disposed RSCoM(-) ligands at the nickel(II) center as sulfonates, and thus, the nickels have an octahedral coordination. The SCoM(2-) adduct Ni(cyclam)(SCoM) was also synthesized, in which the SCoM(2-) ligand chelates the nickel via the thiolate sulfur and a sulfonate oxygen. The trivalent MeSCoM adduct [Ni(cyclam)(MeSCoM)(2)](OTf) was synthesized by treatment of [Ni(cyclam)(NCCH(3))(2)](OTf)(3) with ((n)Bu(4)N)[MeSCoM]. A similar reaction with ((n)Bu(4)N)[HSCoM] did not afford the corresponding trivalent HSCoM(-) adduct, but rather the divalent nickel complex polymer [-Ni(II)(cyclam)(CoMSSCoM)-](n) was obtained, in which the terminal thiol of HSCoM(-) was oxidized to the disulfide (CoMSSCoM)(2-) by the Ni(III) center.     

Optimizing incorporation of nickel(II)�Ccyclam complex in poly(3,4-ethylenedioxythiophene) films for catalytic purposes

Poly(3,4-ethylenedioxythiopene) (PEDOT) films, due to their porous and open structure, as well as high stability, were chosen as a membrane for incorporation of Ni(II) ion complexes with 1,4,8,11-tetraazacyclotetradecane (cyclam) or deposition of electroactive films containing polymerized complex. Accumulation of the complex in PEDOT layers and its electrocatalytic activity was studied basing on voltammetric behavior of Ni(II)?Ccyclam and electroxidation of a model reactant-methanol in alkaline solutions. Several modes of complex incorporation were tested, based on open circuit conditioning or polarization in the presence of nickel ions and cyclam. It was found that the most effective method was incorporation of cyclam in the course of PEDOT electrosynthesis, followed by potentiostatic accumulation of Ni(II) ions. This procedure resulted in around 50 times higher slope of dependence of methanol oxidation current on alcohol concentration than in the absence of PEDOT.     

Optimizing incorporation of nickel(II)–cyclam complex in poly(3,4-ethylenedioxythiophene) films for catalytic purposes

Poly(3,4-ethylenedioxythiopene) (PEDOT) films, due to their porous and open structure, as well as high stability, were chosen as a membrane for incorporation of Ni(II) ion complexes with 1,4,8,11-tetraazacyclotetradecane (cyclam) or deposition of electroactive films containing polymerized complex. Accumulation of the complex in PEDOT layers and its electrocatalytic activity was studied basing on voltammetric behavior of Ni(II)–cyclam and electroxidation of a model reactant-methanol in alkaline solutions. Several modes of complex incorporation were tested, based on open circuit conditioning or polarization in the presence of nickel ions and cyclam. It was found that the most effective method was incorporation of cyclam in the course of PEDOT electrosynthesis, followed by potentiostatic accumulation of Ni(II) ions. This procedure resulted in around 50 times higher slope of dependence of methanol oxidation current on alcohol concentration than in the absence of PEDOT.

     

Electrocatalytic Oxidation of Some Carbohydrates by Nickel/Poly(o‐Aminophenol) Modified Carbon Paste Electrode

This study investigates the electrocatalytic oxidation of glucose and some other carbohydrates on nickel/poly(o‐aminophenol) modified carbon paste electrode as an enzyme free electrode in alkaline solution. Poly(o‐aminophenol) was prepared by electropolymerization using a carbon paste electrode bulk modified with o‐aminophenol and continuous cyclic voltammetry in HClO₄ solution. Then Ni(II) ions were incorporated to electrode by immersion of the polymeric modified electrode having amine group in 1 M Ni(II) ion solution. Cyclic voltammetric and chronoamperometric experiments were used for the electrochemical study of this modified electrode; a good redox behavior of Ni(OH)₂/NiOOH couple at the surface of electrode can be observed, the capability of this modified electrode for catalytic oxidation of glucose and other carbohydrates was demonstrated. The amount of α and surface coverage (Γ*) of the redox species and catalytic chemical reaction rate constant (k) for each carbohydrate were calculated. Also, the electrocatalytic oxidation peak currents of all tested carbohydrates exhibit a good linear dependence on concentration and their quantification can be done easily.     

Electrocatalytic oxidation of methanol and other short chain aliphatic alcohols at Ni(II)–quercetin complex modified multi-wall carbon nanotube paste electrode

A modified electrode Ni(II)–Qu–MWCNT-PE has been fabricated by electrodepositing nickel(II)–quercetin [Ni(II)–Qu] complex on the surface of multi-wall carbon nanotube paste electrode (MWCNT-PE) in alkaline solution. Ni(II)–Qu–MWCNT-PE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple compared with Ni(II)–MWCNT-PE and Ni(II)–Qu-carbon paste electrode. It also shows electrocatalytic activity toward the oxidation of methanol and other short chain aliphatic alcohols, such as ethanol, 1-propanol, and 1-butanol. The catalytic peak current and peak potential decrease in exponential form with the increase of carbon number of the chains. Kinetic parameters such as the electron transfer coefficient, α, rate constant, k _s, of the electrode reaction, and the catalytic rate constant, k _cat, for oxidation of methanol are determined. The stability and reproducibility of the Ni(II)–Qu–MWCNT-PE are good for practical applications.     

An azamacrocyclic electrolyte additive to suppress metal deposition in lithium-ion batteries

An azamacrocyclic compound (1,4,8,11-tetraazacyclotetradecane, cyclam), which forms strong chelate complexes with metal ions such as Mn(II) and Fe(II), is tested as an electrolyte additive to suppress metal deposition. The tetradentate cyclic ligand is electrochemically stable within the working voltage of lithium-ion batteries (0.0–4.5 V vs. Li/Li⁺), hence it is practicable as an electrolyte additive. Deposition of Mn on a graphite electrode, which is severe when a Li/graphite cell is cycled in a Mn(II)-containing electrolyte solution, is greatly suppressed by adding cyclam. Our elemental analysis reveals negligible Mn deposits on a graphite electrode indicating the beneficial role of cyclam. The suppression of metal deposition is further indicated by the absence of an internal short between Li metal and lithium cobalt oxide positive electrode.     

Multi‐Wall Carbon Nanotube Paste Electrode for Adsorptive Stripping Determination of Quercetin: A Comparison with Graphite Paste Electrode via Voltammetry and Chronopotentiometry

Adsorptive‐stripping voltammetry and chronopotentiometry were used to study the adsorption and oxidation of quercetin at both graphite‐nujol paste electrode (GPE) and carbon nanotubes‐nujol paste electrode (CNTPE) for the potential application of carbon nanotube to flavonoids determination. As compared with GPE, CNTPE showed very great power to adsorb quercetin and resulted in a considerable signals enhancement. The adsorption isotherm of quercetin on CNTPE was of Langmuir type, and the stripping of quercetin adsorbed on CNTs showed a quasi‐reversible oxidation reaction involving two‐electron and two‐proton. The high adsorbtive activity of CNTPE was contributed to the high specific surface area and the special surface characteristics of carbon nanotubes. The peak current response of differential pulse voltammetry depended linearly on quercetin concentration. A linear equation I_p(μA)=0.987c(μmol L^?1)+0.023 with a correlation coefficient of 0.994 was obtained over the concentration range 0.1–1.0 μmol L^?1.     

Investigation of Electrochemical Oxidation of Methanol at a Carbon Paste Electrode Modified with Ni(II)‐BS Complex and Reduced Graphene Oxide Nano Sheets

In the present research, the electro oxidation of methanol was investigated by different electrochemical methods at a carbon paste electrode (CPE) modified with bis(salicylaldehyde)‐nickel(II)‐dihydrate complex (Ni(II)‐BS) and reduced graphene oxide (RGO) (which named Ni(II)‐BS/RGO/CPE) in an alkaline solution. This modified electrode showed very efficient activity for oxidation of methanol. It was found that methanol was oxidized by NiOOH groups generated by further electrochemical oxidation of nickel (II) hydroxide on the surface of the modified electrode. The rate constant and electron transfer coefficient were calculated to be 2.18 s^?1 and 0.4, respectively. The anodic peak currents revealed a linear dependency with the square root of scan rate. This behaviour is the characteristic of a diffusion controlled process, so the diffusion coefficient of methanol was found to be 1.16×10^?5 cm² s^?1 and the number of transferred electron was calculated to be 1. Moreover, differential pulse voltammetry (DPV) investigations showed that the peak current values were proportional to the concentration of methanol in two linear ranges. The obtained linear ranges were from 0.5 to 100.0 µM (R²=0.991) and 400.0 to 1300.0 µM (R²=0.992), and the detection limit was found to be 0.19 µM for methanol determination. Generally, the Ni(II)‐BS/RGO/CPE sensor was used for determination of methanol in an industrial ethanol solution containing 4.0 % methanol.     

Determination of nickel by direct automatic potentiometric titration with EDTA and a chemically modified electrode based on a strong acid ion exchanger containing 4-(3,5-dichloro-2-pyridylazo)-1,3-diaminobenzene

A chemically modified electrode (CME) was constructed and evaluated for use as an end-point indicator in the automatic titration of Ni(II) with EDTA. The CME consisted of a graphite paste prepared by mixing a strong acid ion exchanger containing 4-(3,5-dichloro-2-pyridylazo)-1,3-diaminobenzene and graphite powder-Nujol paste. This mixture showed high mechanical resistance in strongly acidic and alkaline solutions (6 M HCl-pH 12). The CME did not require any special conditioning prior to use. It could be used over long periods (5-6 months) of continuous work without renewing either the electroactive surface or paste. In buffered solutions (pH 3-4.5), automatic direct potentiometric titrations could be carried out over a wide interval of Ni(II) concentrations, ranging from 3 to 6000 ppm, with satisfactory accuracy and precision. For practical analysis, the electrode was applied to the determination of nickel in two certified composition alloys. Interferent ions were previously separated by applying an ion-exchange procedure.     

A New and Simple Electrocatalyst for Formaldehyde Oxidation; Nickel/poly(o‐Anisidine)/Film Modified Ionic Liquid Carbon Paste Electrode

In present work, the ionic liquid, 1‐butyl‐3‐methylimidazolium bis (trifluoromethylsulfonyl) imide was incorporated in the carbon paste electrode as the binder (IL‐CPE). O‐anisidine (OA) monomer is electropolymerized in the presence of an aqueous acidic solution onto IL‐CPE (POA/IL‐CPE). The as‐prepared substrate is used as a porous matrix for dispersion of Ni(II) ions by immersing the modified electrode in a nickel(II) nitrite solution. The modified electrodes are characterized by scanning electron microscopy (SEM) and electrochemical methods. The POA/IL‐CPE was applied successfully to highly efficient (current density of 18.2 mA cm^?2) electrocatalytic oxidation of formaldehyde in alkaline medium. Finally, the rate constant for chemical reaction between formaldehyde and redox sites of the electrode was calculated.     

Preparation of Ni/poly(1,5-diaminonaphthalene)-modified carbon paste electrode; application in electrocatalytic oxidation of formaldehyde for fuel cells

This paper deals with electrochemical oxidation of formaldehyde in alkaline solution with a new electrocatalytic system composed of carbon paste electrode coated with poly(1,5-diaminonaphthalene) (P-1,5-DAN) film containing incorporated Ni(II)/Ni(III) redox ions. The modifier layer of (P-1,5-DAN-Ni)(OH)₂ at the electrode surface acts as a catalyst for the oxidation of formaldehyde in 0.1-M NaOH solution. Cyclic voltammetric and chronoamperometric experiments showed that the formaldehyde can be oxidized at the surface of Ni/P-1,5-DAN-modified carbon paste electrode. In cyclic voltammetry studies, the peak current of the oxidation of nickel hydroxide in the presence of formaldehyde increases and is followed by a decrease in the corresponding cathodic current. The rate constant (k) for the chemical reaction between the formaldehyde and nickel hydroxide has been evaluated by chronoamperometry method. This polymeric-modified electrode can oxidize the formaldehyde with high current density (over 7 mA cm⁻²). Thus, it can be a candidate as an anode for fuel cell applications.     

Ni(II)cyclam Catalyzed Reduction of CO2 – Towards a Voltammetric Sensor for the Gas Phase

The detection of CO₂ in the gas phase is possible in presence of oxygen with an amalgamated Au‐poly(tetrafluoroethylene) gas diffusion electrode and an internal electrolyte solution containing Ni(II)cyclam. For concentrations between 0.1 to 1% the electrochemical cell has a sensitivity of 3.58 mA %^?1 and the detection limit is 500 ppm. In preliminary experiments at rotating disk electrodes the optimum pH‐range was found to be between 3.5 to 6 and a selectivity ratio of the catalyst for CO₂/H⁺ of 5 : 1 could be determined. The relationship between reduction current and the square root of the angular speed is linear, indicating that the electrochemical process is limited by diffusion of CO₂. Tl and Pb are presented as alternative electrode materials at which the Ni(II)cyclam catalyzed reduction of CO₂ can be observed. Problems arise from fouling effects at the sensing electrode and a non‐linearity of the calibration plot at higher concentrations.     

Epoxidation of an alkene promoted by various nickel(II) multiaza macrocyclic complexes

The epoxidation of trans-β-methylstyrene promoted by various Ni(II) complexes of macrocyclic ligands (cyclam and 1–5) using PhIO as a terminal oxidant has been investigated. In terms of the rate of epoxide formation, the complexes of monocyclic ligands (cyclam, 1 and 2) are better catalysts than those of polycyclic ligands (3–5) and the cyclam complex without pendant arms is better catalyst than those (1 and 2) with pendant arms. However, a series of the complexes show remarkably similar reactivity in the transfer of oxygen from active high-valent intermediate to the alkene and they provide nearly the same final yield in certain reaction conditions. Therefore, the yield of epoxide produced in a given period depends mainly on the rate of reaction of the complex with PhIO, which is greatly affected by the ligand structure. In order to become a better catalyst, the complex should have low Ni(II)/Ni(III) oxidation potential and the macrocyclic ligand should exert less steric hindrance around the Ni(II) center to allow easy axial approach of the oxidant.     

Preconcentration and determination of mercury(II) at a chemically modified electrode containing 3-(2-thioimidazolyl)propyl silica gel.

A mercury-sensitive chemically modified graphite paste electrode was constructed by incorporating modified silica gel into a conventional graphite paste electrode. The functional group attached to the (3-chloropropyl) silica gel surface was 2-mercaptoimidazole, giving a new product denoted by 3-(2-thioimidazolyl)propyl silica gel, which is able to complex mercury ions. Mercury was chemically adsorbed on the modified graphite paste electrode containing 3-(2-thioimidazolyl)propyl silica (TIPSG GPE) by immersion in a Hg(II) solution, and the resultant surface was characterized by cyclic and differential pulse anodic stripping voltammetry. One cathodic peak at 0.1 V and other anodic peak at 0.34 V were observed on scanning the potential from -0.1 to 0.8 V (0.01 M KNO3; v = 2.0 mV s(-1) vs. Ag/AgCl). The anodic peak at 0.34 V show an excellent sensitivity for Hg(II) ions in the presence of several foreign ions. A calibration graph covering the concentration range from 0.02 to 2 mg L(-1) was obtained. The detection limit was estimated to be 5 microg L(-1). The precision for six determinations of 0.05 and 0.26 mg L(-1) Hg(II) was 3.0 and 2.5% (relative standard deviation), respectively. The method can be used to determine the concentration of mercury(II) in natural waters contaminated by this metal.     

Application of nickel phosphate nanoparticles and VSB-5 in the modification of carbon paste electrode for electrocatalytic oxidation of methanol

Carbon paste electrodes were modified by nickel phosphate nanoparticles and nickel phosphate Versailles Santa Barbara-5 molecular sieves. Then, transition metal ions of Ni(II) were incorporated to the nickel phosphate by immersion of the modified electrode in a 0.1-M nickel chloride solution. The electrochemical behaviors of the modified electrodes were studied using cyclic voltammetry. These modified electrodes were used as anode for the electrocatalytic oxidation of methanol in alkaline medium. The influence of some parameters such as different molecular sieves, scan rate of potential, and methanol concentration was investigated on the anodic peak height of the methanol oxidation. The best result was obtained by nickel phosphate nanoparticles.     

Cathodized Gold Nanoparticle‐Modified Graphite Pencil Electrode for Non‐Enzymatic Sensitive Voltammetric Detection of Glucose

A highly sensitive enzymeless electrochemical glucose sensor has been developed based on the simply prepared cathodized gold nanoparticle‐modified graphite pencil electrode (AuNP‐GPE). Cyclic voltammetry (CV) experiments show that AuNP‐GPE is able to oxidize glucose partially at low potential (around −0.27) whereas the bare GPE cannot oxidize glucose in the entire tested potential windows. Besides, fructose and sucrose cannot be oxidized at potential lower than +0.1 V at AuNP‐GPE. As a result, the glucose oxidation peak at around −0.27 V is suitable enough for selective detection of glucose in the presence of fructose and sucrose. Cathodization of AuNP‐GPE under optimum condition (‐1.0 V for 30 s) in the same glucose solution before voltammetric measurement enhanced glucose oxidation peak current around −0.27 V to achieve an efficient electrochemical sensor for glucose with a detection limit of 12 μM and dynamic range between 0.05 to 5.0 mM with a good linearity (R²= 0.999). Almost no interference effect was observed for sensing of glucose in the presence of ascorbic acid, alanine, phenylalanine, fructose, sucrose, and NaCl.