Multilayer Assemblies Consisting of Tri‐Vanadium‐Substituted Heteropolyanions and Its Electrocatalytic Properties

We describe the controlled fabrication of ultrathin multilayer films consisting of tri‐vanadium‐ substituted heteropolytungstate anions (denoted as P₂W₁₅V₃) and a cationic polymer of quaternized poly (4‐vinylpyridine) partially complexed with osmium bis(2,2′‐bipyridine) (denoted as QPVP‐Os) on the 4‐aminobenzoic acid (4‐ABA) modified glassy carbon electrode (GCE) surface based on layer‐by‐layer assembly. Cyclic voltammetry and UV‐vis absorption spectrometry have been used to easily monitor the thickness and uniformity of thus‐formed multilayer films. The V‐centered redox reaction of P₂W₁₅V₃ in the multilayer films can effectively catalyze the reduction of BrO and NO . The resulting P₂W₁₅V₃/QPVP‐Os multilayer film modified electrode behaves as a much promising electrochemical sensor because of the low overpotential for the catalytic reduction of BrO and NO , and the catalytic oxidation of ascorbic acid.     

Multilayer assembly of calf thymus DNA and poly(4-vinylpyridine) derivative bearing [Os(bpy)(2)Cl](2+): redox behavior within DNA film

Polyelectrolyte multilayer (PEM) films containing polycationic osmium (Os) bipyridyl (bpy) complex-attached poly(4-vinylpyridine) (PVP) derivative [Os(bpy)(2)Cl](2+)-PVP (Os-PVP) and polyanionic calf thymus DNA (CT-DNA) on the surface of gold (Au) electrodes were prepared using a layer-by-layer self-assembly method, and their redox properties were studied. Os complex shows different redox behavior with CT-DNA film in comparison with other PEM film which is composed of ordinary polymers. A cyclic voltammetric study suggested that the outermost polyanionic DNA layer does not hinder the redox reaction of Os complex within the Os-PVP/CT-DNA multilayer film, which may be helpful to understand the electron transfer mechanism with the DNA film. For all the Os-complex-containing PEM layers studied, a diffusion-free electron transfer from the Os complex moieties in these films to the electrode surface was observed. An electrocatalytic oxidation of ascorbic acid (AA) by this DNA-containing PEM film-covered electrode was also proposed.     

Electropolymerization of layer‐by‐layer precursor polymer films

The layer‐by‐layer (LbL) self‐assembly has been used to fabricate polymer thin films on any solid substrates. The multilayer polymer thin films are constructed by alternating adsorption of anionic and cationic polymers. Polyelectrolyte multilayer ultrathin films containing anionic poly[2‐(thiophen‐3‐yl)ethyl methacrylate‐co‐methacrylic acid]; P(TEM‐co‐MA) and cationic poly[4‐(9H‐carbazol‐9‐yl)‐N‐butyl‐4‐vinyl pyridium bromide]; P4VPCBZ, were fabricated. The growth of multilayer ultrathin films was followed by UV–Vis absorption spectrophotometer and surface plasmon resonance spectroscopy (SPR). The deposition of P(TEM‐co‐MA)/P4VPCBZ as multilayer self‐assembled ultrathin films regularly grow which showed linear growth of absorbance and thickness with increasing the number of layer pair. Cross‐linking of the layers was verified by cyclic voltammetry (CV), UV–Vis spectrophotometry and electrochemical surface plasmon resonance (EC‐SPR) spectroscopy with good electro‐copolymerizability. This was verified by spectroelectrochemistry. The SPR angular‐reflectivity measurement resulted in shifts to a higher reflectivity according to the change in the dielectric constant of the electropolymerized film. Copyright © 2011 John Wiley & Sons, Ltd.     

Sensitively Electrochemical Sensing for Sequence‐Specific Detection of Phosphinothricin Acetyltransferase Gene: Layer‐by‐Layer Films of Poly‐L‐Lysine and Au‐Carbon Nanotube Hybrid

An electrochemical DNA sensing film was constructed based on the multilayers comprising of poly‐L ‐lysine (pLys) and Au‐carbon nanotube (Au‐CNT) hybrid. A precursor film of mercaptopropionic acid (MPA) was firstly self‐assembled on the Au electrode surface. pLys and Au‐CNT hybrid layer‐by‐layer assembly films were fabricated by alternately immersing the MPA‐modified electrode into the pLys solution and Au‐CNT hybrid solution. Cyclic voltammetry was used to monitor the consecutive growth of the multilayer films by utilizing [Fe(CN)₆]^3?/4? and [Co(phen)₃]^3+/2+ as the redox indicators. The outer layer of the multilayer film was the positively charged pLys, on which the DNA probe was easily linked due to the strong electrostatic affinity. The hybridization detection of DNA was accomplished by using methylene blue (MB) as the indicator, which possesses different affinities to dsDNA and ssDNA. Differential pulse voltammetry was employed to record the signal response of MB and determine the amount of the target DNA sequence. The established biosensor has high sensitivity, a relatively wide linear range from 1.0×10^?10 mol/L to 1.0×10^?6 mol/L and the ability to discriminate the fully complementary target DNA from single or double base‐mismatched DNA. The sequence‐specific DNA related to phosphinothricin acetyltransferase gene from the transgenically modified plants was successfully detected.     

Layer—by—layer Multilaryer Films Self—assembled from a Rare—earth—containing Poly—oxometalate,Na9[Eu（W5O18）2] and Poly （allylamine hydrochloride） and Their Photoluminescent Properties

Ultrathin multilayer films of a rare-earth-containing polyoxometalate Na9[Eu(W5O18)2](EW) and poly (allymamine hydrochloride)(PAH) have been prepared by layer-by-layer self-assembly from dilute aqueous solution.The fabrication process of the EW/PAH multilaryer films was followed by UV-vis spectroscopy and ellipsometry,which show that the deposition process is linear and highly reproducible from layer to layer.An average EW/PAH bilayer thickness of ca.2.1nm was determined by ellipsometry.In addition,the scanning electron microscopy(SEM) image of the EW/PAH film indicates that the film surface is relatively uniform and smooth.The photoluminescent properties of these films were also investigated by fluorescence spectroscopy.     

Direct Electrochemistry of Hemoglobin in Layer‐by‐Layer Films Assembled with DNA and Room Temperature Ionic Liquid

Based on electrostatic interaction and electrodeposition, poly‐anionic deoxyribonucleic acid (DNA), room temperature ionic liquid 1‐butyl‐3‐methyl‐imidazolium tetrafluoroborate (BMIMBF₄), hemoglobin (Hb) and Poly(diallyldimethylammonium chloride) (PDDA) were successfully assembled into Hb/IL/DNA/PDDA layer‐by‐layer complex films on the surface of ITO electrode. FTIR spectroscopy, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were used to characterize the composite film. The obtained results demonstrated that the Hb molecule in the film kept its native structure and showed its good electrochemical behavior. A pair of well‐defined redox peaks of Hb with the formal potentials (E°′) of ?0.180 V (vs. SCE) was appeared in phosphate buffer solution (PBS, pH 7.0). The Hb/IL/DNA/PDDA/ITO modified electrode also showed an excellent electrocatalytic behavior to the reduction of hydrogen peroxide (H₂O₂). Therefore, the IL/DNA/PDDA complex film as a novel matrix open up a possibility for further study on the direct electrochemistry of other proteins and the fabrication of the third‐generation electrochemical biosensors.     

四铁取代的夹心型钨砷酸盐的合成及玻碳电极表面多层膜组装与电催化性质研究

碳电极表面的修饰在电化学和材料科学中很重要 .最近 ,通过层与层电子间的相互作用来自组装修饰玻碳电极已引起人们的关注 [1] .运用这种方法可将一些功能团修饰到电极表面 ,赋予电极一些新的功能 [2 ] .过渡金属取代的多金属氧酸盐不仅在配位环境 ,而且在催化活性方面都类似于金属卟啉和其它大环配体金属配合物 [3] .将其修饰到玻碳电极表面已有文献报道 [4 ] .由于修饰电极的厚度可控、成分可调及具有良好的电催化活性 ,在生物传感器和电子器件等方面具有潜在的应用前景 .取代型夹心型多金属氧酸盐具有大摩尔质量和高电荷密度 ,表现出优秀…     

Optimization of Electrochemical Total Creatine Kinase Biosensors Based on Three‐Au‐Electrode

For point‐of‐care examination, total CK (creatine kinase: adenosine‐5‐triphosphate‐creatine phosphotransferase, EC 2.7.3.2) biosensors were developed and optimized. The biosensors were fabricated with three‐Au‐electrode system modified with polyvinylpyridine‐osmium‐wired horseradish peroxidase (PVP‐Os‐HRP) redox polymer film. The reagents were separately immobilized on the single layer biosensor and double layer biosensor which contained lens paper layer and the surface layer of the working electrode. The mediator, the working potential, the structure of working electrode and the stabilizer agent were studied. The biosensor with double reagent layer showed good stability at room temperature (≥2 months) and the biosensor with single reagent layer had excellent response signal (a sensitivity of 11 nA L U^?1 cm^?2).     

Photocatalytic Nanocomposite Films Fabricated by Layer‐by‐Layer Self‐assembly of TiO2 Nanoparticles and Lignosulfonates

Photocatalytic multilayer nanocomposite films composed of anatase TiO₂ nanoparticles and lignosulfonates (LS) were fabricated on quartz slides by the layer‐by‐layer (LBL) self‐assembly technique. X‐ray photoelectron spectroscopy (XPS), UV‐vis spectroscopy and atomic force microscopy (AFM) were used to characterize the TiO₂/LS multilayer nanocomposite films. Moreover, the photocatalytic properties (decomposition of methyl orange and bacteria) of multilayer nanocomposite films were investigated. XPS results indicated that the intensities of titanium and sulfur peaks increased with the LBL deposition process. A linear increase in absorbance at 280 nm was found by UV‐Vis spectroscopy, suggesting that stepwise multilayer growth occurs on the substrate and this deposition process is highly reproducible. AFM images showed that quartz slide was completely covered by TiO₂ nanoparticles when a 10‐bilayer multilayer film was formed. The decomposition efficiency of methyl orange by TiO₂/LS multilayer films under the same UV irradiation time increased linearly with the number of TiO₂ layers, and the results of decomposition of bacteria under UV irradiation showed that TiO₂/LS multilayer nanocomposite films exhibited excellent decomposition activity of bacteria (Escherichia coil).     

Butylacrylate‐nucleobase Conjugates as Targets for Two‐step Redox Labeling of DNA with an Osmium Tetroxide Complex

Modification of nucleic acids with osmium tetroxide reagents (Os,L, such as OsO₄,2,2′‐bipyridine, Os,bpy) has been applied in redox DNA labeling, in probing DNA structure as well as in studies of DNA interactions with other molecules. In natural DNA, primarily thymine residues form adducts with the Os,bpy in a structure selective manner. In this paper we introduce a new two‐step technique of DNA modification with the electroactive Os,bpy, consisting in enzymatic construction of DNA bearing butyl acrylate (BA) moieties attached to uracil at C5 or to 7‐deaza adenine at C7, followed by chemical modification of a reactive C=C double bond in the acrylate residue. We demonstrate a facile modification of the BA conjugates in both single‐ and double‐stranded (ds) DNA under conditions when modification within the nucleobase rings in ds DNA is hindered. Various DNA−Os,bpy adducts can easily be analyzed electrochemically and distinguished by different redox potentials. The two‐step procedure appears to be applicable in osmium redox labelling of ds DNA.     

Electrolyte Effects on Charge Transport Behavior of [Os(bpy)2(PVP)10Cl]Cl and [Ru(bpy)2(PVP)10Cl]Cl Redox Polymers in Ultra‐Thin Films of Polyions

Metallopolymer films have important applications in electrochemical catalysis. The alternate electrostatic layer‐by‐layer method was used to assemble films of [Ru(bpy)₂(PVP)₁₀Cl]Cl (denoted as ClRu‐PVP) and [Os(bpy)₂(PVP)₁₀Cl]Cl (ClOs‐PVP) metallopolymers onto pyrolytic graphite electrodes. Film thickness estimated by quartz crystal microbalance was 6–8 nm. The effects of pH, electrolyte species and concentration on the electrochemical properties of these electroactive polymers were studied using cyclic voltammetry (CV). Behavior in various electrolytes was compared. Also the mass changes within the ultra‐thin film during redox of Os^2+/3+ were characterized by in situ electrochemical quartz crystal microbalance (EQCM). The results indicate rapid reversible electron transfer, and show that both ClRu‐PVP and ClOs‐PVP have compact surface structures while ClOs‐PVP is a little denser than ClRu‐PVP. Although hydrogen ions do not participate in the chemical reaction of either film, the movement of Na⁺ cation and water accompanies the redox process of ClOs‐PVP films.     

Surface Plasmon Resonance Coupled with Potential‐step Chronoamperometry: Theory and Applications for Quantitative Measurements of Electrodeposited Thin Films

Cyclic voltammetry (CV) has been combined with surface plasmon resonance (SPR) for probing electrochemical deposition and redox‐initiated film reorganization and conformational changes. However, the varying potential during CV scans leads to unwanted SPR background changes and complicates interpretation of SPR signals. In this work, we show that, when SPR is coupled with CV, the background correction for underpotential deposition of copper and electropolymerization of aniline is either inaccurate or difficult to perform. For accurate thickness measurements of electrodeposited films, potential‐step (PS) chronoamperometry is a method of choice to combine with SPR. The theory that interprets double‐layer charging is used to explain the advantage of PS chronoamperometry over CV in quantifying the thickness of electrodeposited thin films. The influence of the double‐layer charging on the potential‐induced SPR signal change was analyzed, and the results were used to optimize experimental parameters for PS‐SPR. Overall, PS‐SPR is easier to operate, simpler in data interpretation, and more accurate for the film thickness measurement.     

Electrocatalytic Reduction of Oxygen at Multi‐Walled Carbon Nanotubes and Cobalt Porphyrin Modified Glassy Carbon Electrode

The multi‐walled carbon nanotubes (MWNTs) modified glassy carbon electrode exhibited electrocatalytic activity to the reduction of oxygen in 0.1 M HAc‐NaAc (pH 3.8) buffer solution. Further modification with cobalt porphyrin film on the MWNTs by adsorption, the resulted modified electrode showed more efficient catalytic activity to O₂ reduction. The reduction peak potential of O₂ is shifted much more positively to 0.12 V (vs. Ag/AgCl), and the peak current is increased greatly. Cyclic voltammetry (CV), transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), were used to characterize the material and the modified film on electrode surface. Electrochemical experiments gave the total number of electron transfer for oxygen reduction as about 3, which indicated a co‐exist process of 2 electrons and 4 electrons for reduction of oxygen at this modified electrode. Meanwhile, the catalytic activities of the multilayer film (MWNTs/CoTMPyP)_n prepared by layer‐by‐layer method were investigated, and the results showed that the peak current of O₂ reduction increased and the peak potential shifted to a positive direction with the increase of layer numbers.     

Effect of Poly(amine)s on the Redox Properties of Carboxymethylcellulose and Ferrocene‐modified Poly(amine) Layer‐by‐Layer Films

Multilayer films consisting of carboxymethylcellulose (CMC) and ferrocene‐modified poly(ethyleneimine) (Fc‐PEI) or poly(allylamine hydrochloride) (Fc‐PAH) were successfully prepared on a gold electrode to examine their redox properties. The redox current of (Fc‐PEI/CMC)_n film‐coated electrodes increased with the number of layers, while the (Fc‐PAH/CMC)_n film‐coated electrodes exhibited increased response only for the first eight bilayers. The (Fc‐PEI/CMC)_n and (Fc‐PAH/CMC)_n films deposited on the surface of Fc‐free multilayer film‐coated electrodes also showed a redox response. The (PEI/CMC)₅ film‐coated electrode showed redox responses in Fc‐PEI and Fc‐PAH solutions, confirming the uptake of the Fc‐polymers in the inner film. In contrast, the uptake of the Fc‐polymers in the (PAH/CMC)₅ film was severely suppressed, suggesting that different permeability of (PEI/CMC)₅ and (PAH/CMC)₅ films.     

Electrostatic Layer‐by‐Layer Assembly of Polycation and DNA Multilayer Films by Real‐time Surface Plasmon Resonance Technique

The assembly of alternating DNA and positively charged poly‐(dimethyldiallylammonium chloride) (PDDA) multilayer films by electrostatic layer‐by‐layer adsorption has been studied. Real time surface plasmon resonance (BIAcore) technique was used to characterize and monitor the formation of multilayer films in solution in real time continuously. The results indicate that the uniform multilayer can be obtained on the poly‐(ethylenimine) (PEI) coated substrate surface. The kinetics of the adsorption of DNA on PDDA surface was also studied by real‐time BIAcore technique, and the observed rate constant was calculated using a Langmuir model (k_obs = (1.28 ± 0.08) × 10^?2s^?1).     

Fabrication and Electrochemical Behavior of Vanadium‐Substituted Keggin‐Type Polyoxometalates Multilayer Films on 4‐Aminobenzoic Acid Modified Glassy Carbon Electrodes

Two Vanadium‐substituted Keggin‐type polyoxometalates, K₃H₂[α‐SiVW₁₁O₄₀]?6H₂O (SiVW₁₁) and K₄H₂[γ(1, 2)‐SiV₂W₁₀O₄₀]?4H₂O (SiV₂W₁₀) were first successfully immobilized on 4‐aminobenzoic acid modified glass carbon electrodes respectively by layer‐by‐layer assembly with poly (ethylenimine) (PEI) as counterions. The regular growth processes were monitored by cyclic voltammetry (CV), and it was proved that the multilayer films were uniform and stable. The cyclic voltammetry results indicated that the electrochemical behavior of two multilayer films was similar, and their redox couples are pH‐ and scan rate‐dependent. The multilayer films show favorable electrocatalytic active toward the reduction of NO₂^?, IO₃^? and H₂O₂.     

Self‐Assembly of Gold Nanoparticles/Electroactive Polyelectrolyte Multilayer Films for Tunable Electrocatalysis

This study described fabrication, characterization, and application of multilayer films based on layer‐by‐layer assembly of ferrocene poly(ethylenimine) and gold nanoparticles. Assembly process of the multilayer film was investigated by atomic force microscopy, UV‐visible absorption spectroscopy and electrochemical impedance spectroscopy. The multilayer films exhibited a pair of well‐defined redox peaks as revealed by cyclic voltammetry, as well as bifunctional and fine‐tunable electrocatalysis for oxidation of ascorbic acid and reduction of oxygen. Both the outer layer and layer number had effect on the electrocatalytic response. Electrocatalytic activity of the films could be controlled with assemblies at the nanoscale level by simply adjusting deposition cycles or amount of component in the films.     

Effect of Gold Nanoparticles on the Structure and Electron‐Transfer Characteristics of Glucose Oxidase Redox Polyelectrolyte‐Surfactant Complexes

Efficient electrical communication between redox proteins and electrodes is a critical issue in the operation and development of amperometric biosensors. The present study explores the advantages of a nanostructured redox‐active polyelectrolyte–surfactant complex containing [Os(bpy)₂Clpy]²⁺ (bpy=2,2′‐bipyridine, py= pyridine) as the redox centers and gold nanoparticles (AuNPs) as nanodomains for boosting the electron‐transfer propagation throughout the assembled film in the presence of glucose oxidase (GOx). Film structure was characterized by grazing‐incidence small‐angle X‐ray scattering (GISAXS) and atomic force microscopy (AFM), GOx incorporation was followed by surface plasmon resonance (SPR) and quartz‐crystal microbalance with dissipation (QCM‐D), whereas Raman spectroelectrochemistry and electrochemical studies confirmed the ability of the entrapped gold nanoparticles to enhance the electron‐transfer processes between the enzyme and the electrode surface. Our results show that nanocomposite films exhibit five‐fold increase in current response to glucose compared with analogous supramolecular AuNP‐free films. The introduction of colloidal gold promotes drastic mesostructural changes in the film, which in turn leads to a rigid, amorphous interfacial architecture where nanoparticles, redox centers, and GOx remain in close proximity, thus improving the electron‐transfer process.     

Electrochemical properties of niosomes modified Au electrode and DNA recognition

Non-ionic surfactant vesicles (NSVs), also referred to as niosomes, have been studied as an alternative to conventional liposomes. In this paper, electrochemical inspection of the interaction between Herring sperm DNA and niosomes has been investigated after a simple and novel method for the formation of niosomes on Au electrode. Each step of electrode modification has been confirmed with cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The assembly of octadecanethiol (ODT) layer on the electrode surface generates a packed film that introduces a barrier to the interfacial electron transfer (R(et)), and the subsequent immobilization of niosomes onto the self-assembled monolayer (SAM) layer results in a further increase of R(et), due to the formed bilayer almost blocked the redox probe to the electrode surface. When Herring sperm DNA was added, the R(et) value decreased, indicating that the barrier of the redox probe to the surface was disrupted. The addition of DNA caused the formation of some transmembrane channels for the redox probe across the niosomes. A good linear relationship between R(et) value and DNA concentration was found over the 0-0.05 mg mL(-1) concentration range.     

Redox Properties of Ferricyanide Ion on Layer‐by‐Layer Thin Film‐Coated Gold Electrodes; Effects of Type of Polycationic Components in the Film

The surface of a gold (Au) electrode was coated with layer‐by‐layer (LbL) thin films composed of poly(vinyl sulfate) (PVS) and different type of poly(amine)s including poly(allylamine) (PAH), poly(ethyleneimine) (PEI) and poly(diallyldimethylammonium chloride) (PDDA) and redox properties of ferricyanide ion ([Fe(CN)₆]^3?) on the LbL film‐coated Au electrodes were studied. The LbL film‐coated electrodes exhibited redox response to [Fe(CN)₆]^3? ion when the outermost surface of the LbL film was covered with the cationic poly(amine)s while virtually no response was observed on the LbL film‐coated electrodes whose outermost surface was covered with PVS due to an electrostatic repulsion between [Fe(CN)₆]^3? ion and the negatively‐charged PVS layer. The redox properties of [Fe(CN)₆]^3? ion on the LbL film‐coated electrodes significantly depended on the type of polycationic materials in the LbL film. The LbL film‐coated electrodes which had been immersed in the [Fe(CN)₆]^3? solution for 15 min exhibited redox response even in a [Fe(CN)₆]^3? ion‐free buffer solution, suggesting that [Fe(CN)₆]^3? ion is confined in the films. In the buffer solution, redox peaks were observed between +0.1 and 0.4 V depending on the type of polycations in the film. Thus, [Fe(CN)₆]^3? ion can be confined in the film and the redox potential is polycation‐dependent.