Low‐oxidation‐potential conducting polymers derived from 3,4‐ethylenedioxythiophene and dialkoxybenzenes

Monomers derived from 3,4‐ethylenedioxythiophene and phenylenes with branched or oligomeric ether dialkoxy substituents were prepared with the Negishi coupling technique. Electrooxidative polymerization led to the corresponding dialkoxy‐substituted 3,4‐ethylenedioxythiophene–phenylene polymers, with extremely low oxidation potentials (E_1/2,p = ?0.16 to ?0.50 V vs Ag/Ag⁺) due to the highly electron‐rich nature of these materials. The polymers were electrochromic, reversibly switching from red to blue upon oxidation, with bandgaps at about 2 eV. The electrochemical behavior of the oligomeric ether‐substituted polymer was investigated in the presence of different metal ions. Films of the polymer exhibited electrochemical recognition for several alkali and alkaline‐earth cations with selectivity in the order Li⁺ > Ba²⁺ > Na⁺ > Mg²⁺. Cyclic voltammetry showed a decrease in the oxidation potential and an improvement in the definition of the voltammetric response, as well as an increase in the overall electroactivity of the polymer films when the concentration of the cations in the medium was increased. These results are discussed in terms of the electrostatic interactions between the complexed cation and the redox center, as well as the diffusion of the ionic species into the polymer matrix. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2164–2178, 2001     

Alkalikationen-Spezifität und Träger-Eigenschaften der Antibiotica Nigericin und Monensin

It is shown by means of IR. spectroscopic methods that nigericin and monensin have a cyclic conformation similar to that of their silver salts. Complex formation constants with sodium and potassium ions follow the selectivity order determined by EMF. measurements on liquid membranes: nigericin: K⁺ > Rb⁺ > Na⁺ > Cs⁺ > Li⁺; monensin: Na⁺ > K⁺ > Li⁺ > Rb⁺ > Cs⁺. Transport experiments show that nigericin and monensin facilitate the diffusion of potassiumions across model membranes, although in electrolytic transport experiments the permeability is not affected.     

A Black Phosphorus–Graphite Composite Anode for Li‐/Na‐/K‐Ion Batteries

Black phosphorus (BP) is a desirable anode material for alkali metal ion storage owing to its high electronic/ionic conductivity and theoretical capacity. In‐depth understanding of the redox reactions between BP and the alkali metal ions is key to reveal the potential and limitations of BP, and thus to guide the design of BP‐based composites for high‐performance alkali metal ion batteries. Comparative studies of the electrochemical reactions of Li⁺, Na⁺, and K⁺ with BP were performed. Ex situ X‐ray absorption near‐edge spectroscopy combined with theoretical calculation reveal the lowest utilization of BP for K⁺ storage than for Na⁺ and Li⁺, which is ascribed to the highest formation energy and the lowest ion diffusion coefficient of the final potassiation product K₃P, compared with Li₃P and Na₃P. As a result, restricting the formation of K₃P by limiting the discharge voltage achieves a gravimetric capacity of 1300 mAh g^?1 which retains at 600 mAh g^?1 after 50 cycles at 0.25 A g^?1.     

Explanation of Ionic Sequences in Various Phenomena. I. Salting-Out of Uncharged Molecules

Abstract

Theoretical models for hydrated ions and their calculated effective dielectric constants obtained previously were used to explain the salting-in or salting-out of nonionic molecules. Three types of salting-out sequences were obtained: nonpolar (Na⁺ > K⁺ > Li⁺ Rb⁺ > Cs⁺), basic (K⁺ > Na⁺ > Rb⁺ > Cs⁺ > Li⁺), and acidic (Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺). The nonpolar sequence is not influenced by the A region of a cation, and therefore the ability to salt-out is great if the effective dielectric constant of the ion is small. The A region on hydrated Li⁺ ions (the tightly bound water) salts-in basic compounds because of the interaction of its positively charged hydrogen atoms with the negative dipolar charge of the base. Conversely, the A region of a cation salts-out acidic compounds because the hydroxyl group on carboxylic acids behaves as a similar cationic A region. A sulfonic polymer will cause the salting-in of the base p-nitroaniline because the addition of salts to an aqueous solution of the base and polymer destroys hydrogen bonds in the polymer and in so doing releases hydronium ions from the polymer. This release of H⁺, in turn, produces a positive charge on part of the p-nitroaniline molecules, which produces a salting-in effect.     

Preparation of Thallium Hexacyanoferrate Film and Mixed‐Film Modified Electrodes with Cobalt(II) Hexacyanoferrate

Thallium hexacyanoferrate films have been prepared from various aqueous electrolyte solutions using consecutive cyclic voltammetry. The cyclic voltammograms recorded the direct deposition of thallium hexacyanoferrate films from the mixing of Tl³⁺ and [Fe(CN)₆]^3? ions from solutions of seven cations: Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, H⁺, and Tl⁺. An electrochemical quartz crystal microbalance (EQCM) and cyclic voltammetry were used to study the in situ growth of the thallium hexacyanoferrate films. The thallium hexacyanoferrate film shows a single redox couple with a formal potential between +0.6 V and +1.2 V, and shows a cation effect (H⁺, Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, and Tl⁺). A mixed film and a two‐layered modified electrodes composed of a thallium hexacyanoferrate film with cobalt(II) hexacyanoferrate film were prepared.     

Synthesis,binding properties and electrochemistry of nickel(II) macrocyclic complexes containing crown ethers

Macrotetracyclic complexes of nickel(II) containing crown ethers as pendant arms, [Ni(B)](ClO₄)₂ and [Ni(C)](ClO₄)₂, were prepared and characterized. The binding constants of the complexes toward alkali metal ions are relatively small compared with those of free 15-crown-5 or 18-crown-6 and the reduction potentials of the [Ni(B)](ClO₄)₂ and [Ni(C)](ClO₄)₂ in the presence of alkali metal ions shift to the positive direction in the order Li⁺>Na⁺>K⁺ and K⁺>Na⁺>Li⁺, respectively.     

The Role of Alkali Cation Intercalates on the Electrochemical Characteristics of Nb2CTX MXene for Energy Storage

The intercalation of cations into layered-structure electrode materials has long been studied in depth for energy storage applications. In particular, Li⁺-, Na⁺-, and K⁺-based cation transport in energy storage devices such as batteries and electrochemical capacitors is closely related to the capacitance behavior. We have exploited different sizes of cations from aqueous salt electrolytes intercalating into a layered Nb₂CT_x electrode in a supercapacitor for the first time. As a result, we have demonstrated that capacitive performance was dependent on cation intercalation behavior. The interlayer spacing expansion of the electrode material can be observed in Li₂SO₄, Na₂SO₄, and K₂SO₄ electrolytes with d-spacing. Additionally, our results showed that the Nb₂CT_x electrode exhibited higher electrochemical performance in the presence of Li₂SO₄ than in that of Na₂SO₄ and K₂SO₄. This is partly because the smaller-sized Li⁺ transports quickly and intercalates between the layers of Nb₂CT_x easily. Poor ion transport in the Na₂SO₄ electrolyte limited the electrode capacitance and presented the lowest electrochemical performance, although the cation radius follows Li⁺>Na⁺>K⁺. Our experimental studies provide direct evidence for the intercalation mechanism of Li⁺, Na⁺, and K⁺ on the 2D layered Nb₂CT_x electrode, which provides a new path for exploring the relationship between intercalated cations and other MXene electrodes.     

Sensitivity and Selectivity of Polypyrrole Based AC‐Amperometric Sensors for Electroinactive Ions – Frequency and Applied Potential Influence

Oxidation/reduction of polypyrrole films coupled with ion exchange on the polymer/solution interface can be utilized for amperometric sensing of electroinactive ions. Anion or cation exchanging films (polypyrrole doped by chloride or poly(4‐styrenesulfonate) ions, respectively) can be used to determine common anions (as Cl^?, NO , SO etc) or cations (K⁺, Na⁺, Li⁺, Ca²⁺, Mg²⁺) under conditions of alternating current (AC) amperometry in the range 10^?4–1 M. A sensitivity can be tuned by choosing appropriate electrode potential, corresponding to polypyrrole oxidation (anion‐exchanging films) or reduction (cation‐exchangers). Electrochemical impedance spectroscopy and AC‐voltammetry studies have shown that applied frequency and potential could also affect the observed dependence of the signal (admittance or AC‐current) on ion concentration. For high frequency the sensitivity is higher but selectivity lower, due to influence of solution conductivity on the response. For low frequencies the sensitivity is lower; however, a selectivity increase was observed due to diverse mobility of ions in the polymer film. Selectivity of AC‐amperometric responses was studied both in separate and mixed solutions.     

Artificial K+ Channels Formed by Pillararene‐Cyclodextrin Hybrid Molecules: Tuning Cation Selectivity and Generating Membrane Potential

A class of artificial K⁺ channels formed by pillararene‐cyclodextrin hybrid molecules have been designed and synthesized. These channels efficiently inserted into lipid bilayers and displayed high selectivity for K⁺ over Na⁺ in fluorescence and electrophysiological experiments. The cation transport selectivity of the artificial channels is tunable by varying the length of the linkers between pillararene and cyclodexrin. The shortest channel showed specific transmembrane transport preference for K⁺ over all alkali metal ions (selective sequence: K⁺ > Cs⁺ > Rb⁺ > Na⁺ > Li⁺), and is rarely observed for artificial K⁺ channels. The high selectivity of this artificial channel for K⁺ over Na⁺ ensures specific transmembrane translocation of K⁺, and generated stable membrane potential across lipid bilayers.     

Enhancement of Oxygen Evolution Activity of Nickel Oxyhydroxide by Electrolyte Alkali Cations

Herein, the effect of the alkali cation (Li⁺, Na⁺, K⁺, and Cs⁺) in alkaline electrolytes with and without Fe impurities is investigated for enhancing the activity of nickel oxyhydroxide (NiOOH) for the oxygen evolution reaction (OER). Cyclic voltammograms show that Fe impurities have a significant catalytic effect on OER activity; however, both under purified and unpurified conditions, the trend in OER activity is Cs⁺ > Na⁺ > K⁺ > Li⁺, suggesting an intrinsic cation effect of the OER activity on Fe‐free Ni oxyhydroxide. In situ surface enhanced Raman spectroscopy (SERS), shows this cation dependence is related to the formation of superoxo OER intermediate (NiOO^?). The electrochemically active surface area, evaluated by electrochemical impedance spectroscopy (EIS), is not influenced significantly by the cation. We postulate that the cations interact with the Ni?OO^? species leading to the formation of NiOO^??M⁺ species that is stabilized better by bigger cations (Cs⁺). This species would then act as the precursor to O₂ evolution, explaining the higher activity.     

Electrochemical quartz crystal microbalance study for vanadium hexacyanoferrates: monitoring of film growth and ion effects during redox reactions

An electrochemical quartz crystal microbalance was employed to monitor directly the growth of vanadium hexacyanoferrate (VHF) films on platinum substrates during electrodeposition and interfacial coagulation in the solution containing sulfuric acid electrolyte, vanadium(IV) and hexacyanoferrate(III). Mass changes of the gold/crystal working electrode were correlated with cyclic voltammetry data. Effects of cations (NH₄⁺, Li⁺, Na⁺ and K⁺), anions (SO₄²⁻ and NO₃⁻) and solvent during redox reactions of the films were studied. The results show that cations were incorporated into the film during reduction and expelled from the film during oxidation. Solvent also participates in VHF electrochemistry, and its role cannot be neglected. Anions play no role in VHF electrochemistry.     

A Black Phosphorus–Graphite Composite Anode for Li-/Na-/K-Ion Batteries

Black phosphorus (BP) is a desirable anode material for alkali metal ion storage owing to its high electronic/ionic conductivity and theoretical capacity. In-depth understanding of the redox reactions between BP and the alkali metal ions is key to reveal the potential and limitations of BP, and thus to guide the design of BP-based composites for high-performance alkali metal ion batteries. Comparative studies of the electrochemical reactions of Li⁺, Na⁺, and K⁺ with BP were performed. Ex situ X-ray absorption near-edge spectroscopy combined with theoretical calculation reveal the lowest utilization of BP for K⁺ storage than for Na⁺ and Li⁺, which is ascribed to the highest formation energy and the lowest ion diffusion coefficient of the final potassiation product K₃P, compared with Li₃P and Na₃P. As a result, restricting the formation of K₃P by limiting the discharge voltage achieves a gravimetric capacity of 1300 mAh g⁻¹ which retains at 600 mAh g⁻¹ after 50 cycles at 0.25 A g⁻¹.     

An electroactive polymeric material and its voltammetric response towards alkali metal cations in neat water

The syntheses and characterization of a unique system based on thiophene, pyrrole and benzo-15-crown-5 (SNS-Crown) and its corresponding polymer (PSNS-Crown) are reported. Furthermore, selective, clear and reversible voltammetric responses of the conjugated polymer (PSNS-Crown) film towards the alkali series Li⁺, Na⁺ and K⁺ in both neat water and organic media (ethanol) are described.     

Charge density-dependent coil–globule transition of alkali metal polycarboxylates in aqueous organic solvent mixtures

The effects of polymer charge density on the counterion-specific and solvent-specific coil–globule transition of polycarboxylates were investigated for alkali metal salts of poly(styrene-alt-maleic acid) (PSaltMA) and poly(acrylic acid) (PAA) in aqueous organic solvent mixtures. The order of the transition region, namely, the counterion specificity for the transition in, e.g., aqueous dimethyl sulfoxide (DMSO), was the same for both polyelectrolytes, Na⁺?>?K⁺?>?Cs⁺?>?Li⁺, while the discrepancy of the transition region between Na⁺ and Li⁺ systems was appreciably narrower for PSaltMA (approximately 20 vol%) than that of PAA (approximately 29 vol%). Such diminished counterion specificity for the former was ascribed to the nonuniform charge array. Namely, PSaltMA has two kinds of nearest charge arrays, one is the shorter spacing between the maleic acid carboxyl groups and the other is the longer one via one styrene group. Thus, the former may be favorable for binding of the smaller counterion (i.e., Li⁺) and the latter for the larger one (Cs⁺). Such a “size-fitting effect” for the counterion binding was in fact further confirmed with variously neutralized PAAs. For example, the counterion specificity in aqueous DMSO of PAA40 that was neutralized to 40 % was Cs⁺?>?K⁺?>?Na⁺?>?Li⁺, showing that the largest counterion becomes most favorable in inducing the transition with increasing average charge spacing. In fact, the nuclear magnetic resonance line width measurement for ¹³³Cs suggested that the counterion binding strength of the large counterion for PAA increases with decreasing charge density from 100 to 40 % neutralization.     

Selective complexation of alkali metal ions and nanotubular cyclopeptides: a DFT study

A density functional theory based on interaction of alkali metal cations (Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺) with cyclic peptides constructed from 3 or 4 alanine molecule (CyAla3 and CyAla4), has been investigated using mixed basis set (C, H, O, Li⁺, Na⁺ and K⁺ using 6-31+G(d), and the heavier cations: Rb⁺ and Cs⁺ using LANL2DZ). The minimum energy structures, binding energies, and various thermodynamic parameters of free ligands and their metal cations complexes have been determined with B3LYP and CAM-B3LYP functionals. The order of interaction energies were found to be Li⁺ > K⁺ > Na⁺ > Rb⁺ > Cs⁺ and Li⁺ > Na⁺ > K⁺ ? Rb⁺ > Cs⁺, calculated at CAM-B3LYP level for the M/CyAla3 and M/CyAla4 complexes, respectively. Their selectivity trend shows that the highest cation selectivity for Li⁺ over other alkali metal ions has been achieved on the basis of thermodynamic analysis. The main types of driving force host–guest interactions are investigated, the electron-donating O offers lone pair electrons to the contacting LP* of alkali metal cations.     

Study on electrochemical performance of activated carbon in aqueous Li2SO4, Na2SO4 and K2SO4 electrolytes

The electrochemical performances of activated carbon (AC) in 0.5 mol/l Li₂SO₄, Na₂SO₄ and K₂SO₄ aqueous electrolytes were investigated. The cyclic voltammetric results at different scan rates show that the rate behaviors of AC in the three electrolytes improve in the order of Li₂SO₄ < Na₂SO₄ < K₂SO₄. This improvement can be mainly ascribed to the following two reasons: (1) the decreasing equivalent series resistance in the order of Li₂SO₄ > Na₂SO₄ > K₂SO₄, which is the main factor influencing the maximum output power, and (2) the increasing migration speed of hydrated ions in the bulk electrolyte and in the inner pores of AC electrode in the order of Li⁺ < Na⁺ < K⁺. Their cycling behaviors do not show any differences in capacitive fading. The above results provide valuable information to explore new hybrid supercapacitors.     

Aluminum phosphate dispersed on a cellulose acetate fiber surface: Preparation, characterization and application for Li, Na and K separation

Cellulose acetate fibers with supported highly dispersed aluminum phosphate were prepared by reacting aluminum-containing cellulose acetate (Al₂O₃=3.5 wt.%; 1.1 mmol g⁻¹ aluminum atom per gram of the material) with phosphoric acid. Solid-state NMR spectra (CPMAS ³¹P NMR) data indicated that HPO₄²⁻ is the species present on the fiber surface. The specific concentration of acidic centers, determined by ammonia gas adsorption, is 0.50 mmol g⁻¹. The ion exchange capacities for Li⁺, Na⁺ and K⁺ ions were determined from ion exchange isotherms at 298 K and showed the following values (in mmol g⁻¹): Li⁺=0.03, Na⁺=0.44 and K⁺=0.50. The H⁺/Li⁺ exchange corresponds to the model of the ideal ion exchange with a small value of the corresponding equilibrium constant K=1.1×10⁻². Due to the strong cooperative effect, the H⁺/Na⁺ and H⁺/K⁺ ion exchange is non-ideal. These ion exchange equilibria were treated with the use of models of fixed bi- or tridentate centers, which consider the surface of the sorbent as an assemblage of polyfunctional sorption centers. Both the observed ion exchange capacities with respect to the alkaline metal ions and the equilibrium constants were discussed by taking into consideration the sequence of the ionic hydration radii for Li⁺, Na⁺ and K⁺. The matrix affinity order for the ions decreases as the hydration radii of the cations increase, i.e. Li⁺>Na⁺>K⁺. The high values of the separation factors S_Na⁺/Li⁺ and S_K⁺/Li⁺ (up to several hundred) provide quantitative separation of Na⁺ and K⁺ from Li⁺ from a mixture containing these three ions.     

Electrochemical behavior of electrode modified with a cobalt hexacyanoferrate film: Effect of the supporting electrolyte cation

Cobalt hexacyanoferrate films are synthesized on a glassy carbon electrode with sodium, potassium, and ammonium salts in the supporting electrolyte. The electrochemical behavior of the modified electrode is studied in individual solutions of the salts and in their mixtures. The change in electrochemical properties of cobalt hexacyanoferrate agrees with an increase in the interaction of cations with the film in the series Li⁺, Na⁺, K⁺, NH ₄ ⁺ , Cs⁺. The effect of the energy of interaction between the modify ing-substance crystal lattice and counter-ions on the electrochemical processes is discussed     

Spectrophotometric studies of alkali and alkali earth metal ions complexes of mono amino derivative of calix[4]arene

The synthesis and complexive abilities of 5,11,17-tris(tert-butyl)-23 amino-25,26,27,28-tetra-propoxycalix[4]arene towards alkali cations Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺ and alkali earth cations Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ in methanol-chloroform mixture have been evaluated at 25°C, using UV-Vis spectrophotometric techniques. The results showed that the ligand is capable to complex with all the cations by 1: 1 metal to ligand ratios. The selectivity presented considering the calculated formation constants are in the order Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺ and Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ with the ligand.     

Zum Ionenaustausch einwertiger Kationen an synthetischen Natriumpolysilicaten mit Schichtstruktur

Ion Exchange of Monovalent Cations in Synthetic Sodium Polysilicates with Layer Structure Cation-exchange equilibria of synthetic sodium polysilicates Ilerit (Na₂O · 8.3SiO₂ 8.9 H₂O) and Magadiite (Na₂O · 13 SiO₂ · 6.8 H₂O) with H⁺, Li⁺ and K⁺ Ions were investigated with respect to their selectivity behaviour. The range of ion selectivity is: H⁺ > Na⁺ > Li⁺ > K⁺. Thermodynamic data ΔG, ΔH, and ΔS were determined by means of the integral thermodynamic equilibria constants K_th of the ion-exchange reactions.