Functionalization of 2″‐C‐(Piperazinomethyl)‐2′,3′‐BcNA (Bicyclic Nucleic Acids) with Pyren‐1‐ylcarbonyl Units

Herein, we describe the incorporation of 2″‐C‐(piperazinomethyl)‐2′,3′‐BcNA (Bicyclic Nucleic Acids) into oligonucleotides via phosphoramidite chemistry and their subsequent solid‐phase functionalization with pyren‐1‐ylcarbonyl units after oligonucleotide synthesis. Thermal denaturation measurements showed that one modification led to increased thermal stability of the resulting duplex, and that two modifications could be incorporated in close proximity without decreasing the duplex stability (compared to the duplex stability of unmodified RNA). Fluorescence studies of the modified duplexes revealed that the structure and intensity of the fluorescence spectra were largely sequence‐dependent. Furthermore, molecular‐modeling studies showed that the pyrene moieties are placed in the major groove, and that the configuration at C(2″) is important for the thermal stability of the duplex.     

Synthesis,Characterization, and Repair of a Flexible O6‐2′‐Deoxyguanosine‐alkylene‐O6‐2′‐deoxyguanosine Intrastrand Cross‐Link

Oligonucleotides tethered by an alkylene linkage between the O⁶‐atoms of two consecutive 2′‐deoxyguanosines, which lack a phosphodiester linkage between these residues, have been synthesized as a model system of intrastrand cross‐linked (IaCL) DNA. UV thermal denaturation studies of duplexes formed between these butylene‐ and heptylene‐linked oligonucleotides with their complementary DNA sequences revealed about 20 °C reduction in stability relative to the unmodified duplex. Circular dichroism spectra of the model IaCL duplexes displayed a signature characteristic of B‐form DNA, suggesting minimal global perturbations are induced by the lesion. The model IaCL containing duplexes were investigated as substrates of O⁶‐alkylguanine DNA alkyltransferase (AGT) proteins from human and E. coli (Ada‐C and OGT). Human AGT was found to repair both model IaCL duplexes with greater efficiency towards the heptylene versus butylene analog adding to our knowledge of substrates this protein can repair.     

The Effect of a Non‐nucleosidic Phenanthrene Building Block on DNA Duplex Stability

Oligonucleotides containing a phenanthrene‐derived, non‐nucleosidic building block with flexible linkers were synthesized. The effect of the phenanthrene moiety on duplex stability at different positions was investigated. Placement of two phenanthrene residues in opposite positions had a slightly positive effect on duplex stability. This positive effect was further increased, when two phenanthrene pairs were juxtaposed. In contrast, introduction of a single phenanthrene unit opposite to an adenosine or a thymidine led to a destabilization of the duplex. A model of a phenanthrene‐modified duplex is proposed.     

Major‐Groove‐Halogenated DNA: The Effects of Bromo and Iodo Substituents Replacing H−C(7) of 8‐Aza‐7‐deazapurine‐2,6‐diamine or H−C(5) of Uracil Residues

Oligonucleotides containing halogenated `purine' and pyrimidine bases were synthesized. Bromo and iodo substituents were introduced at the 7‐position of 8‐aza‐7‐deazapurine‐2,6‐diamine (see 2b , c ) or at the 5‐position of uracil residues (see 3b , c ). Phosphoramidites were synthesized after protection of 2b with the isobutyryl residue and of 2c with the benzoyl group. Duplexes containing the residues 2b or 2c gave always higher T<sub>m</sub> values than those of the nonmodified counterparts containing 2′‐deoxyadenosine, the purine‐2,6‐diamine 2′‐deoxyribonucleoside ( 1 ), or 2a at the same positions. Six 2b residues replacing dA in the duplex 5′‐d(TAGGTCAATACT)‐3′ ( 11 )⋅5′‐d(AGTATTGACCTA)‐3′ ( 12 ) raised the T<sub>m</sub> value from 48 to 75° (4.5° per modification (Table 3)). Contrary to this, incorporation of the 5‐halogenated 2′‐deoxyuridines 3b or 3c into oligonucleotide duplexes showed very little influence on the thermal stability, regardless of which `purine' nucleoside was located opposite to them (Tables 4 and 5). The positive effects on the thermal stability of duplexes observed in DNA were also found in DNA⋅RNA hybrids or in DNA with parallel chain orientation (Tables 8 and 9, resp.).     

Nucleosides and Oligonucleotides with Diynyl Side Chains: Base Pairing and Functionalization of 2′‐Deoxyuridine Derivatives by the Copper(I)‐Catalyzed Alkyne?Azide ‘Click’ Cycloaddition

Oligonucleotides containing the 5‐substituted 2′‐deoxyuridines 1b or 1d bearing side chains with terminal C?C bonds are described, and their duplex stability is compared with oligonucleotides containing the 5‐alkynyl compounds 1a or 1c with only one nonterminal C?C bond in the side chain. For this, 5‐iodo‐2′‐deoxyuridine ( 3 ) and diynes or alkynes were employed as starting materials in the Sonogashira cross‐coupling reaction (Scheme 1). Phosphoramidites 2b – d were prepared (Scheme 3) and used as building blocks in solid‐phase synthesis. T_m Measurements demonstrated that DNA duplexes containing the octa‐1,7‐diynyl side chain or a diprop‐2‐ynyl ether residue, i.e., containing 1b or 1d , are more stable than those containing only one triple bond, i.e., 1a or 1c (Table 3). The diyne‐modified nucleosides were employed in further functionalization reactions by using the protocol of the Cu^I‐catalyzed Huisgen–Meldal–Sharpless [2+3] cycloaddition (‘click chemistry’) (Scheme 2). An aliphatic azide, i. e., 3′‐azido‐3′‐deoxythymidine (AZT; 4 ), as well as the aromatic azido compound 5 were linked to the terminal alkyne group resulting in 1H‐1,2,3‐triazole‐modified derivatives 6 and 7 , respectively (Scheme 2), of which 6 forms a stable duplex DNA (Table 3). The Husigen–Meldal–Sharpless cycloaddition was also performed with oligonucleotides (Schemes 4 and 5).     

Phenanthrene‐Derived DNA Hairpin Mimics

Self‐complementary oligodeoxynucleotides containing 3,6‐disubstituted phenanthrenes adopt highly stable, hairpin‐like structures. The thermodynamic stability of the hairpin mimics depends on the overall length of the phenanthrene building block. Hairpin loops composed of a phenanthrene‐3,6‐dicarboxamide and ethylene linkers were found to be optimal. The hairpin mimics are more stable than the analogous hairpins containing either a dT₄ or dA₄ tetraloop. Model studies indicate that the thermodynamic stability of the hairpin mimics is primarily due to aromatic stacking of the phenanthrene‐3,6‐dicarboxamide onto the adjoining base pair of the DNA duplex.     

Oligodeoxynucleotide Duplexes Containing (5′S)‐5′‐C‐Alkyl‐Modified 2′‐Deoxynucleosides: Can an Alkyl Zipper across the DNA Minor‐Groove Enhance Duplex Stability?

A series of oligonucleotides containing (5′S)‐5′‐C‐butyl‐ and (5′S)‐5′‐C‐isopentyl‐substituted 2′‐deoxyribonucleosides were designed, prepared, and characterized with the intention to explore alkyl‐zipper formation between opposing alkyl chains across the minor groove of oligonucleotide duplexes as a means to modulate DNA‐duplex stability. From four possible arrangements of the alkyl groups that differ in the density of packing of the alkyl chains across the minor groove, three (duplex types I – III , Fig. 2) could experimentally be realized and their duplex‐forming properties analyzed by UV‐melting curves, CD spectroscopy, and isothermal titration calorimetry (ITC), as well as by molecular modeling. The results show that all arrangements of alkyl residues within the minor groove of DNA are thermally destabilizing by 1.5–3°/modification in T_m. We found that, within the proposed duplexes with more loosely packed alkyl groups (type‐ III duplexes), accommodation of alkyl residues without extended distorsion of the helical parameters of B‐DNA is possible but does not lead to higher thermodynamic stability. The more densely packed and more unevenly distributed arrangement (type‐ II duplexes) seems to suffer from ecliptic positioning of opposite alkyl groups, which might account for a systematic negative contribution to stability due to steric interactions. The decreased stability in the type‐ III duplexes described here may be due either to missing hydrophobic interactions of the alkyl groups (not bulky enough to make close contacts), or to an overcompensation of favorable alkyl‐zipper formation presumably by loss of structured H₂O in the minor groove.     

Oligonucleotides Containing 7‐Deaza‐2′‐deoxyinosine as Universal Nucleoside: Synthesis of 7‐Halogenated and 7‐Alkynylated Derivatives,Ambiguous Base Pairing,and Dye Functionalization by the Alkyne–Azide ‘Click’ Reaction

Oligonucleotides containing 7‐deaza‐2′‐deoxyinosine derivatives bearing 7‐halogen substituents or 7‐alkynyl groups were prepared. For this, the phosphoramidites 2b – 2g containing 7‐substituted 7‐deaza‐2′‐deoxyinosine analogues 1b – 1g were synthesized (Scheme 2). Hybridization experiments with modified oligonucleotides demonstrate that all 2′‐deoxyinosine derivatives show ambiguous base pairing, as 2′‐deoxyinosine does. The duplex stability decreases in the order C_d>A_d>T_d>G_d when 2b – 2g pair with these canonical nucleosides (Table 6). The self‐complementary duplexes 5′‐d(F⁷c⁷I‐C)₆, d(Br⁷c⁷I‐C)₆, and d(I⁷c⁷I‐C)₆ are more stable than the parent duplex d(c⁷I‐C)₆ (Table 7). An oligonucleotide containing the octa‐1,7‐diyn‐1‐yl derivative 1g , i.e., 27 , was functionalized with the nonfluorescent 3‐azido‐7‐hydroxycoumarin ( 28 ) by the Huisgen–Sharpless–Meldal cycloaddition ‘click’ reaction to afford the highly fluorescent oligonucleotide conjugate 29 (Scheme 3). Consequently, oligonucleotides incorporating the derivative 1g bearing a terminal C?C bond show a number of favorable properties: i) it is possible to activate them by labeling with reporter molecules employing the ‘click’ chemistry. ii) Space demanding residues introduced in the 7‐position of the 7‐deazapurine base does not interfere with duplex structure and stability (Table 8). iii) The ambiguous pairing character of the nucleobase makes them universal probes for numerous applications in oligonucleotide chemistry, molecular biology, and nanobiotechnology.     

Substitution of Adenine by Purine‐2,6‐diamine Improves the Nonenzymatic Oligomerization of Ribonucleotides on Templates Containing Thymidine

A standard DNA sequencer was used as a novel and highly efficient tool to study the template‐controlled polymerization of RNA. When labeled with appropriate fluorescent dyes, primers and their extension products could be separated and quantified with excellent sensitivity, reproducibility, and speed. The new technique was applied to compare the template‐controlled incorporation of adenosine mononucleotide 2 and its purine‐2,6‐diamine analogue 3 , the latter being capable of forming three H‐bonds with thymidine or uridine residues. The rates and yields of incorporation are similar when only one thymidine unit is available for pairing in the template (see template 6 and Table 2). However, on template 7 with two consecutive thymidine residues, purine‐2,6‐diamine is clearly ahead of adenine (see Table 3). This advantage is most pronounced when the template contains stretches of three and four thymidine moieties (see templates 8 and 9 and Tables 4 and 5, resp.).     

O6‐Alkylguanine DNA Alkyltransferase Repair Activity Towards Intrastrand Cross‐Linked DNA is Influenced by the Internucleotide Linkage

Oligonucleotides containing an alkylene intrastrand cross‐link (IaCL) between the O⁶‐atoms of two consecutive 2′‐deoxyguanosines (dG) were prepared by solid‐phase synthesis. UV thermal denaturation studies of duplexes containing butylene and heptylene IaCL revealed a 20 °C reduction in stability compared to the unmodified duplexes. Circular dichroism profiles of these IaCL DNA duplexes exhibited signatures consistent with B‐form DNA. Human O⁶‐alkylguanine DNA alkyltransferase (hAGT) was capable of repairing both IaCL containing duplexes with slightly greater efficiency towards the heptylene analog. Interestingly, repair efficiencies of hAGT towards these IaCL were lower compared to O⁶‐alkylene linked IaCL lacking the 5′‐3′‐phosphodiester linkage between the connected 2′‐deoxyguanosine residues. These results demonstrate that the proficiency of hAGT activity towards IaCL at the O⁶‐atom of dG is influenced by the backbone phosphodiester linkage between the cross‐linked residues.     

Pyrrolo‐dC Metal‐Mediated Base Pairs in the Reverse Watson–Crick Double Helix: Enhanced Stability of Parallel DNA and Impact of 6‐Pyridinyl Residues on Fluorescence and Silver‐Ion Binding

Reverse Watson–Crick DNA with parallel‐strand orientation (ps DNA) has been constructed. Pyrrolo‐dC (PyrdC) nucleosides with phenyl and pyridinyl residues linked to the 6 position of the pyrrolo[2,3‐d]pyrimidine base have been incorporated in 12‐ and 25‐mer oligonucleotide duplexes and utilized as silver‐ion binding sites. Thermal‐stability studies on the parallel DNA strands demonstrated extremely strong silver‐ion binding and strongly enhanced duplex stability. Stoichiometric UV and fluorescence titration experiments verified that a single ^2pyPyrdC–^2pyPyrdC pair captures two silver ions in ps DNA. A structure for the PyrdC silver‐ion base pair that aligns 7‐deazapurine bases head‐to‐tail instead of head‐to‐head, as suggested for canonical DNA, is proposed. The silver DNA double helix represents the first example of a ps DNA structure built up of bidentate and tridentate reverse Watson–Crick base pairs stabilized by a dinuclear silver‐mediated PyrdC pair.     

Visible‐Light‐Triggered Cross‐Linking of DNA Duplexes by Reversible [2+2] Photocycloaddition of Styrylpyrene

Reversible photo‐cross‐linking of a DNA duplex through the [2+2] photocycloaddition of styrylpyrene is reported. Styrylpyrene moieties on d ‐threoninol linkers were introduced into complementary positions on DNA strands. Irradiation of the styrylpyrene pair in the duplex with visible light at λ=455 nm induced a [2+2] photocycloaddition between styrylpyrenes that cross‐linked the two strands of the duplex. Two diastereomers were formed after [2+2] photocycloaddition as a result of rotation of the styrylpyrene residues. Also, the cycloreversion reaction was induced by UV light at λ=340 nm, which reversibly yielded the uncross‐linked strands.     

A cationic dye triplet as a unique "glue" that can connect fully matched termini of DNA duplexes

In this study, we propose that three consecutive cationic p‐methylstilbazoles tethered on D ‐threoninols ( Z residues) at 5′ termini act as a unique “glue” connecting DNA duplexes by their interstrand cluster formation. Interstrand clustering of p‐methylstilbazoles ( ZZZ triplets) induces narrowing and hypsochromic shift of bands at 350 nm, which can be assigned to the absorption of p‐methylstilbazole. However, single‐stranded DNA conjugates involving a ZZZ triplet at the 5′ terminus of 8‐mer native nucleotides is found not to induce such large spectral changes, which implies that the intrinsic self‐assembling property of ZZZ triplets is weak. Interestingly, when this conjugate is hybridized with a complementary 8‐mer native oligonucleotide, a remarkable spectral change is observed, indicating the dimerization of a duplex through the interstrand clustering of ZZZ triplets. Dimerization of the duplex is also evidenced by cold‐spray ionization mass spectrometry. This interstrand clustering is observed only when a ZZZ triplet is tethered to a 5′ rather than 3′ terminus. Furthermore, the stability of the interstrand cluster increases by increasing the number of nucleobases of the DNA portion, and when mismatched base pairs are incorporated or when a base next to the Z residue is deleted, the stability substantially drops. When we apply the ZZZ triplet to the formation of a nanowire using two complementary DNA conjugates, each of which has a ZZZ triplet at the 5′ termini as overhang, we demonstrate the successful formation of a nanowire by native PAGE analysis. Since native sticky ends that have three nucleotides do not serve as “glue”, ZZZ triplets with their unique glue‐like properties are prime candidates for constructing DNA‐based nanoarchitectures.     

2‐Phenanthrenyl–DNA: Synthesis,Pairing, and Fluorescence Properties

Three 2′‐phenanthrenyl‐C‐deoxyribonucleosides with donor (phenNH₂), acceptor (phenNO₂), or no (phenH) substitution on the phenanthrenyl core were synthesized and incorporated into oligodeoxyribonucleotides. Duplexes containing either one or three consecutive phenR residues, which were located opposite each other, were formed. Within these residues, the phenR residues are expected to recognize each other through interstrand stacking interactions, in much the same way as described previously for biphenyl DNA. The thermal, thermodynamic, and fluorescence properties of such duplexes were determined by UV melting analysis and fluorescence spectroscopy. Depending on the nature of the substituent, the thermal stability of single‐modified duplexes can vary between ?2.7 to +11.3 °C in T_m and that of triple‐modified duplexes from +7.8 to +11.1 °C. Van′t Hoff analysis suggested that the observed higher thermodynamic stability in phenH‐ and phenNO₂‐containing duplexes is of enthalpic origin. A single phenH or phenNO₂ residue in a bulge position also stabilizes a corresponding duplex. If a phenNO₂ residue is placed in a bulge position next to a base mismatch this can lead, in a sequence‐dependent manner, to duplex destabilization. The phenNO₂ residue was found to be a highly efficient (10–100‐fold) quencher of phenH and phenNH₂ fluorescence if placed in the opposite position to the fluorophores. When phenH and phenNH₂ residues were placed opposite each other, efficient quenching of phenH and enhancement of phenNH₂ fluorescence was found, which is an indicator for electron‐ or energy‐transfer processes between the aromatic units.     

Dipyrido[3,2-a:2′,3′-c]phenazine-Tethered Oligo-DNA: Synthesis and Thermal Stability of Their DNA⋅DNA and DNA⋅RNA Duplexes and DNA⋅DNA⋅DNA Triplexes

Dipyrido[3,2-a:2′,3′-c]phenazine (dppz) derivatives were conjugated to 9-mer and 18-mer DNA (ODN) at a site without nucleobase, either at the 5′- or 3′-end or at a internucleotide position, via linkers of 7, 12, or 18 atoms lengths. These dppz-linked ODNs were synthesized using novel backbone glycerol phosphoramidites: Glycerol, serving as artificial nucleoside without nucleobase, was modified to amines 10 , 23 , and 24 , which were suitable for the subsequent key reaction with dppz-carboxylic acid 3 (Schemes 2 and 3). The products of these reactions (see 5 – 7 ) were then transformed to the standard phosphoramidite derivatives (see 27 , 29 , and 30 ) or used for loading on a CPG support (see 28 , 31 , and 32 ). The dppz-modified ODNs were subsequently assembled in the usual manner using automated solid-phase DNA synthesis. The 9-mer ODN-dppz conjugates 35 – 43 were tested for their ability to form stable duplexes with target DNA or RNA strands (D11 ( 60 ) or R11 ( 61 )), while the 18-mer ODN-dppz conjugates 48 – 56 were tested for their ability to form stable triplexes with a DNA target duplex D24⋅D24 ( 62 ) (see Tables 1 and 2). The presence of the conjugated dppz derivative increases the stability of DNA⋅DNA and DNA⋅RNA duplexes, typically by a ΔT_m of 7.3 – 10.9° and 4.5 – 7.4°, respectively, when the dppz is tethered at the 5′- or 3′-terminal (Table 2). The dppz derivatives also stabilize triplexes when attached to the 5′- or 3′-end, with a ΔT_m varying from 3.8 – 11.1° (Table 3). The insertion of a dppz building block at the center of a 9-mer results in a considerably poorer stability of the corresponding DNA⋅DNA duplexes (ΔT_m=0.5 to 4.2°) and DNA⋅RNA duplexes (ΔT_m=−1.5 to 0.9°), while the replacement of one interior nucleotide by a dppz building unit in the corresponding 8-mer ODN does not reveal the formation of any duplex at all. Different types of modifications in the middle of the 18-mer ODN, in general, do not lead to any triplex formation, except when the dppz derivative is tethered to the ODN through a 12-atom-long linker (Entry 9 in Table 3).     

Synthesis and Properties of Nonpolar DNA (Arylalkyl)phosphonates

The eight (arylalkyl)‐modified phosphoramidites (=(arylalkyl)phosphonamidites) 1 – 8 (Fig. 2) were synthesized (Schemes 1–3) and incorporated at different positions into 2′‐deoxyoligonucleotides. The [P(R)]‐ and [P(S)]‐diastereoisomers of the hexanucleotides 32 – 39 (Table 1) and of the dodecanucleotides 41 – 45 (Table 2) obtained were separated by means of reversed‐phase HPLC. UV, CD, and fluorescence spectroscopy were used to investigate the thermal stability (T_m) and the structural changes of their DNA duplexes with 5′‐d(CGCGCG)‐3′ and 5′‐d(ATGATTGACCTG)‐3′, respectively. The T_m values significantly depend on the place of modification (Table 2). A dangling‐end effect is observed when the [3‐(anthracen‐9‐yl)propyl]‐modified 8 is attached at the 5′‐terminus (see duplex with 45c ). In the case of the incorporation of aromatic moieties tethered via a methylene linker to the P‐atom (benzyl‐ and (naphthalen‐1‐ylmethyl)‐modified 1 and 6 , resp.), the duplexes with the [P(R)]‐oligonucleotides are more stable than those with the [P(S)]‐isomers, whereas in the case of longer alkyl chains at the P‐atom (see 2 – 5 ), the T_m values show the reverse tendency. The observed T_m differences are assigned to changes in base stacking (Figs. 6 and 7).     

Structural,Electronic, and Optical Properties of Metallo Base Pairs in Duplex DNA: A Theoretical Insight

Using density functional theory calculations, we investigated the structural, energetic, electronic, and optical properties of recently synthesized duplex DNA containing metal‐mediated base pairs. The studied duplex DNA consists of three imidazole (Im) units linked through metal (Im‐M‐Im, M=metal) and four flanking A:T base pairs (two on each side). We examined the role of artificial base pairing in the presence of two distinctive metal ions, diamagnetic Ag⁺ and magnetic Cu²⁺ ions, on the stability of duplex DNA. We found that metal‐mediated base pairs form stable duplex DNA by direct metal ion coordination to the Im bases. Our results suggest a higher binding stability of base pairing mediated by Cu²⁺ ions than by Ag⁺ ions, which is attributed to a larger extent of orbital hybridization. We furthermore found that DNA modified with Im‐Ag⁺‐Im shows the low‐energy optical absorption characteristic of π–π*orbital transition of WC A:T base pairs. On the other hand, we found that the low‐energy optical absorption peaks for DNA modified with Im‐Cu²⁺‐Im originate from spin–spin interactions. Additionally, this complex exhibits weak ferromagnetic coupling between Cu²⁺ ions and strong spin polarization, which could be used for memory devices. Moreover, analyzing the role of counter ions (Na⁺) and the presence of explicit water molecules on the structural stability and electronic properties of the DNA duplex modified with Im‐Ag⁺‐Im, we found that the impact of these two factors is negligible. Our results are fruitful for understanding the experimental data and suggest a potential route for constructing effective metal‐mediated base pairs in duplex DNA for optoelectronic applications.     

Stability of Hoogsteen‐Type Triplexes – Electrostatic Attraction between Duplex Backbone and Triplex‐Forming Oligonucleotide (TFO) Using an Intercalating Conjugate

Syntheses are described for two novel twisted intercalating nucleic acid (TINA) monomers where the intercalator comprises a benzene ring linked to a naphthalimide moiety via an ethynediyl bridge. The intercalators Y and Z have a 2‐(dimethylamino)ethyl and a methyl residue on the naphthalimide moiety, respectively. When used as triplex‐forming oligonucleotides (TFOs), the novel naphthalimide TINAs show extraordinary high thermal stability in Hoogsteen‐type triplexes and duplexes with high discrimination of mismatch strands. DNA Strands containing the intercalator Y show higher thermal triplex stability than DNA strands containing the intercalator Z . This observation can be explained by the ionic interaction of the protonated dimethylamino group under physiological conditions, targeting the negatively charged phosphate backbone of the duplex. This interaction leads to an extra binding mode between the TFO and the duplex, in agreement with molecular‐modeling studies. We believe that this is the first example of an intercalator linking the TFO to the phosphate backbone of the duplex by an ionic interaction, which is a promising tool to achieve a higher triplex stability.     

Hydrogen Bonding or Stacking Interactions in Differentiating Duplex Stability in Oligonucleotides Containing Synthetic Nucleoside Probes for Alkylated DNA

Oligonucleotides that hybridize to modified DNA are useful chemical tools to probe the noncovalent interactions that stabilize DNA duplexes. In an effort to better understand the interactions that influence the specificity of hybridization probes for O⁶‐alkylguanine lesions, we examined a series of synthetic nucleoside analogues (BIM, Benzi, and Peri) with respect to their ability to stabilize duplex DNA comprised of native or damaged DNA oligonucleotides. The base‐modified nucleoside analogues contained systematically varied hydrogen‐bonding and π‐stacking properties. The nucleoside probes were incorporated into DNA and paired opposite canonical bases (A, T, C, or G), O⁶‐methylguanine (O⁶‐MeG), O⁶‐benzylguanine (O⁶‐BnG), or a stable abasic site analogue (tetrahydrofuran, THF). On the basis of the free energy of duplex formation, the highest degree of stabilization was observed when Peri was paired opposite O⁶‐MeG. The thermodynamic data suggest that the smaller probes stabilize DNA duplexes more through hydrogen bonding, whereas the larger probes, with a greater capacity to π stack, contribute to duplex stabilization more on the basis of base stacking. These results demonstrate that increased helix stability could be achieved when BIM, Benzi, or Peri were paired opposite damage‐containing DNA rather than unmodified DNA (that is, O⁶‐MeG rather than G). This knowledge is expected to be useful in the design and development of nucleoside analogues for uses in DNA‐based technologies.     

3′‐Deoxyribopyranose (4′→2′)‐Oligonucleotide Duplexes (=p‐DNA Duplexes) as Substitutes of RNA Hairpin Structures

By automated synthesis, we prepared hybrid oligonucleotides consisting of covalently linked RNA and p‐DNA sequences (p‐DNA=3′‐deoxyribopyranose (4′→2′)‐oligonucleotides) (see Table 1). The pairing properties of corresponding hybrid duplexes, formed from fully complementary single strands were investigated. An uninterrupted π‐π‐stacking at the p‐DNA/RNA interface and cooperative pairing between the two systems was achieved by connecting them via a 4′‐p‐DNA‐2′→5′‐RNA‐3′ and 5′‐RNA‐2′→4′‐p‐DNA‐2′ phosphodiester linkage, respectively (see Fig. 4). The RNA 2′‐phosphoramidites 9 – 12 , required for the formation of the RNA‐2′→4′‐p‐DNA phosphodiester linkage were synthesized from the corresponding, 3′‐O‐tom‐protected ribonucleosides (tom=[(triisopropylsilyl)oxy]methyl; Scheme 1). Analogues of the flavin mononucleotide (=FMN) binding aptamer 22 and the hammerhead ribozyme 25 were prepared. Each of these analogues consisted of two p‐DNA/RNA hybrid single strands with complementary p‐DNA sequences, designed to substitute stem/loop and stem motifs within the parent compounds. By comparative binding and cleavage studies, it was found that mixing of the two complementary p‐DNA/RNA hybrid sequences resulted in the formation of the fully functional analogues 23 ⋅ 24 and 27 ⋅ 28 of the FMN‐binding aptamer and of the hammerhead ribozyme, respectively.