Cesium-selective optode membrane based on the lipophilic calix[4]biscrown in the 1,3-alternate conformation

One type of lipophilic calix[4]biscrowns in the 1,3-alternate conformation which are highly selective complexant for cesium has been used to construct cesium poly(vinyl chloride) (PVC) membrane optode. The reversible sensing system has been formed by incorporating the lipophilic neutral H⁺—selective chromoionophore ETH5294 in the plasticized PVC membrane with 1,3-calix[4]bisnaphtyl-crown-6. The measuring range of cesium ions can be conditioned by buffering different pH in the cesium solutions. At pH 7.0, the measuring range of the optode membrane for cesium ions is from 1×10⁻⁶ to 1×10⁻² M. The response behavior of optode membrane including response time, selectivity, reproducibility and lifetime, has been described in detail.     

Novel Plastic Chromium(III)‐Ion Selective Electrodes Based on Different Ionophoric Species and Plasticizing Solvent Mediators

Different ionophoric species, viz.: 18‐crown‐6 (18C6), dibenzo‐18‐crown‐6 (DB18C6) and calix[6]arene (CAX), as electroactive materials, with 2‐nitrophenyloctylether (2‐NPOE), bis(ethylhexyl)sebacate (DOS), dioctyl phthalate (DOP), and didecyl phthalate (DDP) as plasticizing solvent mediators were used to construct Cr³⁺ selective electrodes in a PVC matrix in the ratio (w/w) PVC: ionophore: plasticizer (60 : 2 : 120). Seven electrodes out of the fabricated 12 electrodes, gave best results in terms of working concentration range (1.0×10^?5?1.0×10^?1 M) with a close to Nernstian slope of 18.5 and a Nernstian slope of 20.0 mV/decade of activity. The usable pH range of the sensors is 4.0–7.0. The detection limit of the selected electrodes is ≤1.0×10^?7 M. The response time of the sensors is 8–35 s, depending on the concentration of Cr³⁺ used. The selectivity coefficient values indicate that the electrodes are highly selective for Cr³⁺ over a number of other cations except Pb²⁺ and Na⁺ (for some electrodes). The electrodes have successfully been used to determine Cr³⁺ in certified and real alloys and in effluents of electroplating shops with a precision as relative standard deviation (RSD)<3%, for each of the proposed Cr³⁺‐ion selective electrodes. The results obtained by the proposed ISEs are in good agreement with the results obtained by direct flame AAS method.     

Membrane Composition Effects on the Analytical Behavior of Solid Contact Potentiometric Pb2+ Selective Electrodes Based on Diazadibenzo‐18‐crown‐6 Ionophores

The effect of component contents and membrane thickness on the detection limit (DL), slope (m), linear range (LR) and response time (RT) of Pb²⁺ solid contact potentiometric ion selective electrodes (SCISE) based on 4,10‐diaza‐2,3,11,12‐dibenzo‐18‐crown‐6 (1), 4,10‐diaza‐2,3,11,12‐di(4‐tert‐butylbenzo)‐18‐crown‐6 (2) and 4,10‐diaza‐2,3,11,12‐dibenzo‐18‐crown‐6‐N,N′‐di(carboxymethyl) (3) as ionophores was studied by open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) measurements. The use of an intermediate layer of poly(3‐octyl)thiophene between the gold substrate and the selective membrane was explored. SCISE prepared showing the best responses had typical DL, m, LR and RT values of 10^?6 M, 29 mV/dec, 10^?5 to 10^?3 M and 2 minutes.     

Spectrophotometric study of the supramolecular complexes of [60]- and [70]Fullerenes with biscalix[6]arene and crown[4]calix[6]arene

[60]- and [70]Fullerenes have been shown to form 1:1 supramolecular complexes with bis[2-(5,11,17,23,29,35-hexa-tert-butyl-37,38,39,40,41-pentahydroxycalix[6]arenyl-oxy ethyl ether) (1) and 5,11,17,23,29,35-hexa-tert-butyl-37,38,40,41-tetra hydroxyl-39,42-(crown-4)calix[6]arene (2) in CHCl3 medium by electronic absorption spectroscopy. Formation constants (K) of the complexes of [60]- and [70]fullerenes with 1 and 2 have been determined at room temperature from which free energy of formation values of the complexes have been estimated. The very high formation constant value of [60]fullerene/1 complex (5900 dm3 mol-1) in indicative of formation of inclusion complex. Moreover, PM3 calculations reveal that intermolecular interaction between [60]fullerene and 1 proceeds through quite deep energy molecular orbital.     

Amide and Acyl‐Hydrazine Functionalized Calix[4]arenes as Carriers for Hydrogen Phosphate Selective Electrodes

Anion‐selective solvent polymeric membrane based on hydrogen bond‐forming, neutral ionophores with amide or acyl‐hydrazine groups are described. The use of the two calix[4]arenes results in anion‐selective electrodes with a selectivity for phosphate. The electrodes of the optimum characteristic have the composition of 1 wt% ionophore, 66 wt% o‐NPOE, 33 wt% poly (vinyl chloride) (PVC) and TDMACl (15 or 30 mol% relative to the ionophore 1 and 2 , respectively). The optimized membrane electrodes show Nernstian responses towards monohydrogen phosphate (?29.1 and ?29.3 mV/decade) based on ionophore 1 and 2 , respectively, in a wide concentration range (1.0×10^?5 to 1.0×10^?2 or 1.0×10^?5 to 1.0×10^?1 M). The selectivity coefficients are determined with the fixed interference method and the activity ratio method. The electrodes display an anti‐Hofmeister series selectivity pattern and highly selective for HPO₄^2? over Cl^?, Br^?, CH₃COO^?, NO₃^? and SO₄^2?. The lifetime of the electrodes is at least 1 month and their response time is found to be 25 s. The proposed sensors could be put to analytical use both by direct potentiometry as well as potentiometric titration.     

A Coated Graphite Thorium‐Ion Selective Potentiometric Sensor Based on a Calix[4]arene Bearing Phosphoryl Groups

5,11,17,23‐Tetra‐tert‐butyl‐25,26,27,28‐tetrakis(diphenylphosphinoylmethoxy)calix[4]arene ( 1 )has been used for the preparation of a graphite coated thorium ion‐selective electrode (Th⁴⁺‐ISE). The plasticized PVC membrane containing 30% PVC, 58% ortho‐nitrophenyloctylether (NPOE), 4% sodium tetraphenylborate (NaTPB) and 8% ionophore was directly coated on a graphite rod. This sensor gave good Nernstian responses with a slope of 15.5 ± 0.1 mV/decade over a concentration range of 1 × 10^?5 ?1 × 10^?3 M of thorium ions with a limit of detection of 7.9 × 10^?6 M. The dynamic response time of the electrode to achieve a steady potential was found to be about 15 seconds. The potential of the prepared sensor was independent of the pH variation in the range 2.3–4.0. The selectivity relative to several mono‐, di‐ and tri‐valent metal ions, i.e. Li⁺, Na⁺, K⁺, Ag⁺, NH₄⁺, Sr²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺ and Y³⁺ was examined. This electrode can be used for 6 months without any considerable divergences in the potential response. The sensor was successfully used as an indicator electrode for the potentiometric titration of a thorium solution using a standard solution of EDTA.     

Response Characteristics of Copper‐Selective Polymer Membrane Electrodes Based on a Newly Synthesized Macrocyclic Calix[4]arene Derivative as a Neutral Carrier Ionophore

A novel macrocyclic calix[4]arene derivative was examined as an ionophore for ion‐selective polymeric membrane electrode toward Cu⁺² ions. The sensor showed a near Nernstian response for Cu(II) ions over a concentration range from 8.1×10^?6 to 1.0×10^?2 mol L^?1 with a slope of 34.2±0.4 mV per concentration decade in an acidic solution (pH 5). The limit of detection was 0.47 µg mL^?1. It had a response time of <20 s and can be used for at least 3 months without any divergence in potentials. The influence of plasticizer as well as the amount of lipophilic anionic site additive in the sensing membrane was discussed. It was shown that membrane electrodes formulated with the ionophore and appropriate anionic additive exhibited enhanced potentiometric response toward Cu²⁺ over all other cations tested. Since selectivity toward Cu²⁺ ions is decreased in the presence of high amount of the anionic additive, the ionophore can function as neutral carriers within the organic membrane phase. Validation of the assay method revealed good performance characteristics, including long life span, good selectivity for Cu²⁺ ions over a wide variety of other metal ions, long term response stability, and high reproducibility. The sensors were used for direct measurement of copper content in different rocks collected from different geological zones. The results agreed fairly well with data obtained using atomic absorption spectrometry.     

Chromium(III) Potentiometric Sensor Based on Para‐Tertiary‐Butyl Calix[4]arene

A new chromium(III) PVC membrane sensor incorporating p‐tertiary‐butyl calix[4]arene as ionophore, potassium tetrakis as additive and dibutyl phthalate (DBP) as plasticizer was constructed. The electrode exhibited an excellent potentiometric response over a wide concentration range of 1.0×10^?7–1.0×10^?1 M with a Nernstian slope of 20±0.5 mV per decade. The detection limit was 5.0×10^?8 M. The electrode showed a better performance over a pH range of 3.0–8.0, and had a short response time of about <15 s.The electrode was successfully applied to potentiometric titration of Cr (III) with EDTA and for direct determination of chromium(III) in waste water.     

A Lead‐Selective Membrane Electrode Based Upon a Phosphorylated Hexahomotrioxacalix[3]Arene

Solvent extraction of a mixture of Pb^II, Mn^II, Fe^III, Co^II, Ni^II and Cd^II in aqueous perchlorate medium by a phosphorylated hexahomotrioxacalix[3]arene (calix‐3) in dichloromethane shows a significant selectivity towards lead ions. The ligand can also be incorporated into a membrane to provide a new lead ion‐selective electrode (Pb^II‐ISE). A plasticized PVC membrane containing 30% PVC, 53.5% ortho‐nitrophenyloctylether (NPOE), 4.5% sodium tetraphenylborate (NaTPB) and 12% ionophore was directly coated on a graphite rod. This sensor gave a good Nernstian response of 29.7 ± 0.7 mV decade^?1 over a concentration range of 1 × 10^?8 – 1 × 10^?4 M of lead ions, independent of pH in the range 3‐7, with a detection limit of 0.4 × 10^?8 M. The dynamic response time of the electrode to achieve a steady potential was very fast and found to be less than 7 s. The selectivity relative to Ag⁺, NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺, Y³⁺ and Th⁴⁺ was examined. The electrode exhibits adequate stability with good reproducibility (with a slope of 29.6 ± 1.5 mV for 8 weeks). The characteristics of the sensor are compared with those of a tetraphosphorylated calix[4]arene (calix‐4) based Pb^II‐ISE, reported recently. The electrode was successfully used as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for lead ion measurements in various synthetic samples was also investigated.     

Synthesis of p‐tert‐Butyl‐calix[6] ‐biscrown‐3 via Intramolecular Ring‐closure of 1,4‐Bis (2‐(2‐chloroethoxy) ethoxy) ‐p‐tert‐butyl‐calix[6]arene

With a variation in reaction conditions, 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐calix[6]arene (3) and l,3,5‐tris(2‐(2‐chloroethoxy) ethoxy)‐calix [6] arene (4) or 4 and 4‐chloroethoxyethoxy‐calix[6]crown‐3 (5) were selectively synthesized from p‐tert‐butyl‐calix [6] arene and 2‐(2‐chloroethoxy)ethyltosylate. l,3–4,6‐p‐tert‐butylcalix[6]‐bis‐crown‐3 (6) with (u,u,u,d,d,d) conformation and 1,3–4,5‐p‐tert‐butylcalix[6]‐biscrown‐3 (7) with self‐anchored (u,u, u, u, u, d) conformation were synthesized through an intramolecularly ring‐closing condensation of 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐p‐tert‐butyl‐calix[6]arene (3) in 25% and 15% yield, respectively. Using 5 instead of 3, only 7 was obtained in 65% high yield. 6 and 7 show different complexation properties toward alkali metal and ammonium ions.     

杯[4]芳烃单取代1,3-二酮衍生物的合成及生物活性研究

以杯[4]芳烃为原料经醚化和克莱森缩合两步反应首次合成杯[4]芳烃单取代1,3-二酮衍生物,其结构经1H NMR、13C NMR及MS表征。初步的HIV-1整合酶链转移反应活性测试结果表明,该杯[4]芳烃单取代1,3-二酮衍生物在测试浓度为25μM时其抑制率为12.67%。     

杯[4]芳烃四丁醚的选择性硝化

硝化反应;杯[4]芳烃四丁醚的选择性硝化     

Polymeric ISE for Hydrogen Sulfite Based on Bis‐Urea Calix[4]diquinones as Neutral Lipophilic Ionophores

A new PVC membrane electrode for HSO₃^? anion based on bis‐urea calix[4]diquinones I–VI as neutral ionophores is prepared. Of the various membranes prepared, the membrane based on calix[4]diquinone III exhibits a linear stable response over a wide concentration range (6.0×10^?5?1.0×10^?2) with a slope of ?51.5 mV/decade and a detection limit of 2.2×10^?6 M. With the exception of HSO₃^? anion, the remainder of the anions responds based on their hydrophobicity. The membrane revealed improved selectivity coefficients for HSO₃^? over a wide variety of other anions, and the comparable selectivity for the HSO₃^?selective membranes is iodide anion.     

Synthesis of an unsymmetrically doubly bridged calix[4]arene in the 1,3-alternate conformation

We report the synthesis of the first calix[4]arene constrained to a 1,3-alternate conformation by one crown ether and one di-aza-benzo crown ether bridgings. Preliminary binding properties are also given.     

Synthesis of New Chiral Calix [4] crown Containing (R)‐Cysteine

Three new chiral heterocalix [4] crowns containing aza thio atoms bearing two chiral sites provided by (R)‐cysteine ester were synthesized. All new compounds were characterized by ¹H NMR, MS and elemental analysis.     

Chiral nitrogen-containing calix[4]crown—an excellent receptor for chiral recognition of mandelic acid

A chiral nitrogen-containing calix[4]crown 2 bearing optically pure 1,2-diphenyl-1,2-oxyamino residue at lower rim showed excellent chiral recognition between enantiomers of mandelic acid. Using competitive ¹H NMR titration the ratio of association constants of (S)- and (R)-mandelic acid with the chiral calix[4]crown was determined to be 102, that is 98% de, which is the best result obtained from artificial receptors for the chiral recognition of mandelic acid up to now.     

Nickel Ion-Selective PVC Membrane Electrode Based on a New t-Octyl-Calix[6]arene Derivative

This study presents a PVC membrane based on 5,11,17,23,29,35-Hexakis-t-octyl-37,38,39,40,41,42-hexakis(N-phenylthiocarbamoylmethoxy)calix[6]arene which is used as an electroactive substance. The electrode reveals a Nernstian response for Ni²⁺ over a wide pH range with a slope of linear portion (5×10^–6–1×10^–2M, R=0.988) of 29.75±0.2mV·decade^–1 at 25°C. The electrodes sensitivity is enhanced upon the introduction of sodium tetraphenylborate into the membrane as a negatively charged lipophilic additive. The selectivity coefficients of various interfering ions were determined using the fixed interference method (FIM). The membrane reveals good selectivity for nickel ions over the other metal ions investigated. The lifetime of this electrode is about one month. This electrode has been applied to the determination of nickel ions in wastewater from the electroplating industry.     

Use of Cucurbit[6]uril as Ionophore in Ion Selective Electrodes for Etilefrine Determination in Pharmaceuticals

Cucurbiturils are macrocyclic molecules and have been used with promising results in the development of electrochemical sensors and biosensors due to their main properties such as shape, selectivity, binding interactions and solubility. However, its application for the development of ion selective electrodes has been scarce. In this work, cucurbit[6]uril was used as molecular‐recognition compound for etilefrine sensing membrane with potentiometric transduction. The etilefrine selective electrode was evaluated and proposed as an alternative methodology for pharmaceutical quality control. Different membranes composition were evaluated, considering the use of different solvent mediators and the presence of anionic additives. The best membrane comprises 9.24 mmol.Kg^?1 of cucurbit[6]uril, 68.90 % (w/w) of dibutylsebacate and 30.18 % (w/w) of carboxylated polyvinyl chloride. The electrode exhibited selective cationic response toward the etilefrine in a concentration interval of more than four decades, with an slope of 57.4±0.5 mV dec^?1, a practical detection limit of (8±1)×10^?7 mol L^?1 and a low limit of linear range of (1.25±0.28)×10^?6 mol L^?1. The selectivity of the electrode towards different interfering was high. A comparative evaluation of the accuracy and precision of both procedures was done using the t‐student test (t4,12=1.135) and the Fischer test (F12,4=2.42) and compared with the tabulated ones (t4,12=1.135, F11,3=5.91) for the level of confidence of 95 %.     

Cesium ion-selective electrodes based on 1,3-alternate thiacalix[4]biscrown-6,6

Four thiacalix[4]biscrown ethers with 1,3-alternate conformation were examined for the potentiometric responses in poly(vinyl chloride) membrane electrodes. Their potentiometric selectivities toward potassium and cesium ions over other alkali, alkaline earth, and transition metal ions were measured by the fixed interference method (FIM). Among the ionophores, 1,3-alternate thiacalix[4]biscrown-6,6 showed a high selectivity for cesium over potassium ion and so was optimized as a Cs⁺-selective electrode. The electrode exhibited a linear response with a near Nernstian slope of 57.6 mV per decade in the concentration range of 1.0×10⁻⁶ to 3.2×10⁻² M. It was suitable for use in aqueous solution in a wide range of pH 2.5-12.5 and had a fast response time of ca. 5 s. On the basis of 1,3-alternate thiacalix[4]biscrown-6,6, the electrode has a wide linear range and selectivity for cesium ion over potassium ion better than those previously reported with other ionophores.