Electrochemical and electrocatalytic properties of myoglobin and hemoglobin incorporated in carboxymethyl cellulose films

Protein-CMC films were made by casting a solution of myoglobin (Mb) or hemoglobin (Hb) and carboxymethyl cellulose (CMC) on pyrolytic graphite electrodes. In pH 7.0 buffers, Mb and Hb incorporated in CMC films gave a pair of well-defined and quasi-reversible cyclic voltammetric peaks at about -0.34 V vs. SCE, respectively, characteristic of heme Fe(III)/Fe(II) redox couples of the proteins. The electrochemical parameters such as apparent standard heterogeneous electron transfer rate constants (k(s)) and formal potentials (E degrees ') were estimated by square wave voltammetry with nonlinear regression analysis. In aqueous solution, stable CMC films absorbed large amounts of water and formed hydrogel. Scanning electron microscopy of the films showed that interaction between Mb or Hb and CMC would make the morphology of dry protein-CMC films different from the CMC films alone. Positions of Soret absorbance band suggest that Mb and Hb in CMC films retain their secondary structure similar to the native states in the medium pH range. Trichloroacetic acid, nitrite, oxygen, and hydrogen peroxide were catalytically reduced at protein-CMC film electrodes.     

Direct electrochemistry and electrocatalysis of hemoglobin on undoped nanocrystalline diamond modified glassy carbon electrode

Direct electrochemistry of hemoglobin (Hb) was observed at glassy carbon electrode (GCE) modified with undoped nanocrystalline diamond (UND) and Hb multilayer films via layer-by-layer assembly. UV-VIS absorbance spectroscopy, electrochemical impedance spectroscopy and cyclic voltammograms were employed to characterize the film. The results showed that the UND had the effect of enhancing the electron transfer between Hb and the electrode surface. Hb in the multilayer films maintained its bioactivity and structure. It also exhibited a good catalytic activity towards the reduction of H(2)O(2). The reciprocal of catalytic current showed a linear dependence on the reciprocal of H(2)O(2) concentration ranging from 0.5 microM to 0.25 mM with a detection limit of 0.4 microM. The apparent Michaelis-Menten constant was estimated to be 0.019 mM.     

Hemoglobin/colloidal silver nanoparticles immobilized in titania sol-gel film on glassy carbon electrode: direct electrochemistry and electrocatalysis

By vapor deposition method, both hemoglobin (Hb) and colloidal silver nanoparticles (CSNs) were entrapped in a titania sol-gel matrix on the surface of a glassy carbon electrode (GCE). CSNs could greatly enhance the electron transfer reactivity of Hb and its catalytic ability toward nitrite. Direct fast electron transfer between Hb and the GCE was achieved, and a pair of well-defined, quasi-reversible redox peaks was observed. The anodic and cathodic peak potentials are located at -0.298 V and -0.364 V (vs. Ag/AgCl), respectively. The dependence of the formal potential on solution pH indicated that the direct electron transfer reaction of Hb was a one-electron transfer coupled with a one-proton transfer reaction process. Meanwhile, the catalytic ability of Hb toward the reduction of NO2- was also studied. Accordingly, a NO2- biosensor was prepared, with a linear range from 0.2 mM to 6.0 mM and a detection limit of 34.0 microM. The apparent Michaelis-Menten constant was calculated to be 7.48 mM. Moreover, the biosensor had good long-term stability.     

Construction of hyaluronan-silver nanoparticle–hemoglobin multilayer composite film and investigations on its electrocatalytic properties

In this work, hyaluronan-silver nanoparticles (HSNPs) were prepared by UV-initiated photoreduction, and protein hemoglobin (Hb) was then alternately assembled with the prepared negatively charged HSNPs into layer-by-layer (LBL) films on solid surface. The electrochemical behavior and electrocatalytic activities toward oxygen and hydrogen peroxide of the resulting films were studied. It was found that the HSNPs greatly enhanced the electron transfer reactivity of Hb as a bridge. The assembly films showed a pair of nearly reversible redox peaks with a formal potential of −0.32 V (vs. Ag/AgCl) for the heme Fe(III)/Fe(II) redox couple. The immobilized Hb in the films maintained its biological activity, showing a surface-controlled process with a heterogeneous electron transfer rate constant (k _s) of 1.0 s⁻¹ and displaying the same features of a peroxidase in the electrocatalytic reduction of oxygen and hydrogen peroxide. This work provides a novel model to fabricate LBL films with protein, polysaccharide and nanoparticles, which may establish a foundation for fabricating new type of biosensors based on the direct electron transfer of redox proteins immobilized in nanocomposite multilayer films with underlying electrodes.     

Single-chain surfactant monolayer on carbon paste electrode and its application for the studies on the direct electron transfer of hemoglobin

A variety of single-chain surfactants with different charge properties and tail lengths can spontaneously adsorb on the hydrophobic surface of carbon paste electrode and form stable monolayers on the electrode surface. Hemoglobin (Hb) was successfully immobilized on these surfactant monolayers to form stable protein-surfactant composite films regardless of the charge and the tail length of surfactants. The resulting surface-confined Hb exhibited well-defined direct electron-transfer behaviors in all positively, neutrally and negatively charged surfactant films, suggesting the important role of hydrophobic interactions in the adsorption of Hb on surfactant films. When the density of surfactant monolayers was controlled to be the same, Hb was found to possess a better direct electron-transfer behavior on monolayers of cationic surfactants with a longer tail length. This, in combination with the tunneling effect in the direct electron transfer of Hb on surfactant films, demonstrated that the adsorption of Hb on surfactant monolayers may be mainly achieved by the partial intercalation of Hb in the loose structures of surfactant films through hydrophobic interactions between the alkane chains of surfactants and the hydrophobic regions of Hb. The native conformation of Hb adsorbed on these surfactant films was proved to be unchanged, reflected by the unaltered ultraviolet-visible (UV-vis) and reflection-absorption infrared (RAIR) spectra, and by the catalytic activity toward hydrogen peroxide (H(2)O(2)) and nitric oxide (NO) in comparison with the free Hb molecules.     

高分子聚合物-多壁碳纳米管复合物固定漆酶及其在玻碳电极上的直接电子迁移

采用不同结构的高分子聚合物与纯化的多壁碳纳米管(MWCNTs)共混的方法,制备得到聚合物非共价功能化多壁碳管复合物,测定了这些载体对漆酶(lac)的担载量、固定漆酶的比活力及稳定性.以固定漆酶的复合物修饰玻碳(GC)电极后,采用循环伏安法研究这些电极在无氧磷酸盐缓冲液(PBS)中的直接电化学行为及催化氧还原活力,粗略地测定了固定漆酶与电极间电子转移的速率常数.实验结果表明,当聚合物中含亲漆酶基团或能与漆酶活性中心发生相互作用的官能团时利于直接电子转移,而且复合物固定漆酶保持了游离漆酶的天然构象.这些电极中,lac/NIPAM-co-BPCP-M WCNTs/GC(NIPAM-co-BPCP:N-烯丙基-1-苯甲酰基-3-苯基-4,5-2H-4-甲酰胺基吡唑-co-N-异丙基丙烯酰胺)在无氧PBS中发生直接电子转移的式电位(605mV)更接近漆酶活性中心的式电位(580mV),具有较快的异相电子转移速率(0.726s-1),较高的漆酶担载量(103.5mg/g)和固定漆酶比活力(1.68U/mg),较高的催化氧还原能力(氧还原起始电位820mV,在650mV时的催化峰电流为85.5μA)以及良好的重复使用性和长期使用性.     

Direct electrochemistry and electrocatalytic characteristic of heme proteins immobilized in a new sol-gel polymer film

Heme proteins were immobilized on glass carbon electrodes by poly (N-isopropylac-yamide-co-3-methacryloxy-propyl-trimethoxysilane) (PNM) and exhibited a pair of well-defined, quasi-reversible cyclic voltammetric peaks at about -0.35 V versus a saturated calomel electrode in pH 7.0 buffer solution, corresponding to hemeFe(III)+e-->hemeFe(II). Some electrochemical parameters were calculated by performing nonlinear regression analysis of square wave voltammetry (SWV) experimental data. The formal potential was linearly dependent on pH, indicating the electron transfer of Fe(III)/Fe(II) redox couple accompanied by the transfer of proton. Ultraviolet visible and Fourier transform infrared spectra suggested that the conformation of proteins in the PNM films retained the essential feature of its native secondary structure. Atomic force microscopy images demonstrated the existence of interaction between heme proteins and PNM. N,N-dimethylformamide (DMF) played an important role in immobilizing proteins and enhancing electron transfer between proteins and electrodes. Electrochemical catalytic reductions of hydrogen peroxide and trichloroacetic acid by proteins entrapped in PNM film were also discussed, showing the potential applicability of the film modified electrodes as a biosensor.     

Electrocatalytic evaluation of liquid phase deposited methylene blue/TiO2 hybrid films

Methylene blue (MB)/TiO₂ hybrid thin films were prepared on glassy carbon (GC) electrode surface by the liquid phase deposition (LPD) process. The electrochemical measurements indicated that MB retained its electrochemical activity in the hybrid films. The linear dependence of the reduction peak current for MB upon the scan rate and linear relationship between the middle point potential of MB and pH revealed the surface-confined two-proton two-electron electrochemical characteristics of MB entrapped in hybrid LPD films. Although the electron transfer of K₃[Fe(CN)₆] on GC surface was inhibited by TiO₂ film, the catalytic reduction of K₃[Fe(CN)₆] by MB was observed on the MB/TiO₂ hybrid films. The electrocatalytic activity of hybrid films was also demonstrated as an “artificial peroxidase” for the catalytic reduction of H₂O₂.     

Direct electron transfer for hemoglobin in biomembrane-like dimyristoyl phosphatidylcholine films on pyrolytic graphite electrodes

Stable thin films made from dimyristoyl phosphatidylcholine (DMPC) with incorporated hemoglobin (Hb) on pyrolytic graphite (PG) electrodes were characterized by electrochemical and other techniques. Cyclic voltammetry (CV) of Hb-DMPC films showed a pair of well-defined and nearly reversible peaks at about -0.27 V vs. saturated calomel electrode (SCE) at pH 5.5, characteristic of Hb heme Fe(III)/Fe(II) redox couple. The electron transfer between Hb and PG electrodes was greatly facilitated in DMPC films. Apparent heterogeneous rate constants (ks) were estimated by fitting square wave voltammograms of Hb-DMPC films to a model featuring thin layer behavior and dispersion of formal potentials for redox center. The formal potential of Hb heme Fe(III)/Fe(II) couple in DMPC films shifted linearly between pH 4.5 to 11 with a slope of -48 mV pH-1, suggesting that one proton is coupled to each electron transfer in the electrochemical reaction. Soret absorption band positions suggest that Hb retains a near native conformation in DMPC films at medium pH. Differential scanning calorimetry (DSC) showed the phase transition for DMPC and Hb-DMPC films, suggesting DMPC has an ordered multibilayer structure. Trichloroacetic acid (TCA) was catalytically reduced by Hb-DMPC films with significant decreases in the electrode potential required.     

Direct electron transfer and electrocatalysis of hemoglobin in layer-by-layer films assembled with Al-MSU-S particles

In this paper, layer-by-layer (LBL) {MSU/Hb}(n)/PDDA films assembled by alternate adsorption of positively charged hemoglobin (Hb) and negatively charged mesoporous molecular sieves of Al-MSU-S onto a glassy carbon electrode (GCE) were reported. Al-MSU-S was synthesized by the precursor of zeolite Y and ionic liquids 1-hexadecane-3-methylimidazolium bromide (CMIMB) as a template in basic medium. It exhibited larger pore diameter, pore volume and surface area. Direct electrochemical and electrocatalytic properties of Hb in these layer-by-layer films were investigated. A pair of well-defined nearly reversible cyclic voltammetric peaks was observed and the formal potential of the heme Fe(III)/Fe(II) redox couple was found to be -0.295V (vs. SCE). The influences of layer's number and the pH of the external solution to the electron transfer behavior of Hb in {MSU/Hb}(n)/PDDA films were also estimated by cyclic voltammetry and a set of optimized conditions for film fabrication was inferred. The hemoglobin in{MSU/Hb}(n)/PDDA films displayed a good electrocatalytic activity to the reduction of hydrogen peroxide, which had linear current responses from 1.0 x 10(-6) to 1.86 x 10(-4)mol/L with the detection limit of 5.0 x 10(-7)mol/L (S/N=3). The apparent Michaeli-Menten constant (K(m)(app)) was 0.368 mmol/L. Thus, this methodology shows potential application of the preparation of third-generation biosensors.     

Kinetics of the oxygen transfer reaction at the (U0.5Sc0.5)O2±x/YSZ interface by impedance spectroscopy

The complex impedance dispersion analysis technique was used to study the electrode kinetics of (U_0.5Sc_0.5)O_2±x, a fluorite type solid solution material potentially suitable as electrode for low temperature oxygen sensors. Variables included the temperature and oxygen partial pressure. The effect of heat treatment on the interfacial contact resistance and the electrode morphology was also investigated. A single are for the electrode reaction was observed over most of the experimental ranges of temperature and oxygen partial pressure. The angle of depression of the electrode are was small (8–18°) compared with platinum electrodes (20–45°). The activation energy for the overall electrode reaction was between 170 and 180 kJ mol^?1. The average value for the pressure exponent, determined from the oxygen partial pressure dependence of the electrode resistance, was 0.16. A mechanism for the oxygen transfer reaction is proposed. Materials of this type show promise for future use in low temperature oxygen sensors.     

Study on the enhancement of catalytic activity for hemoglobin by quinhydrone in poly(o-aminophenol) film

Hemoglobin (Hb) and quinhydrone (QHQ) were incorporated in poly(o-aminophenol) [o-AP, POAP] film by electropolymerization of o-aminophenol in a weak acid solution containing Hb and QHQ. The nonconducting polymer film was found to be nearly rigid by piezoelectric quartz crystal (PQC) impedance. Therefore, the thickness of the Hb-QHQ-POAP film was estimated as about 104 +/- 10 nm by quartz crystal microbalance (QCM). The QHQ mediation effects on the biomacromolecule Hb entrapped in the POAP film were investigated by using cyclic voltammetry, amperometric technique and kinetic study. Cyclic voltammograms showed that the redox peaks in the Hb-QHQ-POAP film are much more reversible than those in the Hb-POAP film. The response current of the Hb-QHQ-POAP film to H(2)O(2) was almost twice than that of the Hb-POAP film. The Michaelis-Menten constant and the activation energy of Hb in the Hb-QHQ-POAP film are 7.47 mM and 13.91 kJ/mol, respectively, both are smaller than that in the Hb-POAP film. These results showed that the immobilized Hb in POAP film exhibited higher catalytic activity to H(2)O(2) due to the mediation of QHQ.     

血红蛋白在离子液体[BMIM]PF6碳糊电极上的直接电化学

制备了离子液体[BMIM]PF6修饰碳糊电极(CILE), 并对其形貌和电化学行为进行了表征. 采用涂布法利用壳聚糖-皂土有机-无机复合膜将血红蛋白(Hb)固定于CILE电极表面, 利用紫外可见光谱、红外光谱和电化学方法等手段对包埋于膜内的Hb的性质进行了表征. 结果表明, Hb在薄膜内保持了其原始构象与生物活性, 循环伏安实验表明, 在pH=7.0的Britton-Robinson (B-R)缓冲液中, Hb表现出一对峰形良好的准可逆氧化还原峰, 为Hb Fe(III)/Fe(II)电对的特征峰, 对其直接电化学行为进行了研究, 求出式电位为-0.352 V(vs SCE), 电子转移数为0.885, 电荷传递系数为0.578, 表观异相电子转移速率常数为0.149 s-1.     

Direct electrochemistry of hemoglobin and glucose oxidase in electrodeposited sol–gel silica thin films on glassy carbon

This work points out that electrogeneration of silica gel (SG) films on glassy carbon electrodes (GCEs) can be applied to immobilize biomolecules – hemoglobin (Hb) or glucose oxidase (GOD) or both of them in mixture – without preventing their activity. These proteins were physically entrapped in the sol–gel material in the course of the electro-assisted deposition process applied to form the thin films onto the electrode surface. SG films were prepared from a precursor solution by applying a suitable cathodic potential likely to induce a local pH increase at the electrode/solution interface, accelerating thereby polycondensation of the silica precursors with concomitant film formation. Successful immobilization of proteins was checked by various physico-chemical techniques. Both Hb and GOD were found to undergo direct electron transfer, as demonstrated by cyclic voltammetry. GCE–SG–Hb gave rise to well-defined peaks at potentials E_c = −0.29 V and E_a = −0.17 V in acetate buffer, corresponding to the Fe^III/Fe^II redox system of heme group of the protein, while GCE–SG–GOD was characterized by the typical signals of FAD group at E_c = −0.41 V and E_a = −0.33 V in phosphate buffer. These two redox processes were also evidenced on a single voltammogram when both Hb and GOD were present together in the same SG film. Hb entrapped in the silica thin film displayed an electrocatalytic behavior towards O₂ and H₂O₂ in solution, respectively in the mM and μM concentration ranges. Immobilized GOD kept its biocatalytic properties towards glucose. Combined use of these two proteins in mixture has proven to be promising for detection of glucose in solution via the electrochemical monitoring of oxygen consumption (decrease of the oxygen electrocatalytic signal).     

Direct Electrochemistry and Catalytic Activity of Hemoglobin and Myoglobin Entrapped in PEG Film

Abstract

Direct electrochemistry and electrocatalysis of two heme proteins, hemoglobin (Hb) and myoglobin (Mb), incorporated in polyethylene glycol (PEG) films, were studied by cyclic voltammetry. The two proteins exhibited a pair of well‐defined, quasi‐reversible cyclic voltammetric peaks with the apparent formal potential at about ?0.21 V (Hb) and ?0.22 V (Mb), respectively, vs. saturated calomel electrode (SCE) in pH 5.0 acetate buffer solution, characteristic of the h eme Fe(III)/Fe(II) redox couples, indicating enhanced electron transfer between the proteins and the substrate electrode in the PEG film environment. The protein–PEG films could also exhibit excellent stability. Meanwhile, positions of Soret absorption band of the proteins in the PEG films suggested that the heme proteins kept their secondary structure similar to their native state in the medium pH range. Oxygen, trichloroacetic acid, nitric oxide, and hydrogen peroxide could all be catalytically reduced by Hb or Mb in PEG films.     

Assembly of layer-by-layer films of electroactive hemoglobin and surfactant didodecyldimethylammonium bromide

When a solid substrate with negative surface charges was placed in an aqueous didodecyldimethylammonium bromide (DDAB) vesicle dispersion, the cationic surfactant DDAB with two hydrocarbon chains could be assembled into the biomembrane-like tail-to-tail double-layer structure on the solid surface with the positively charged head groups toward outside, making the surface charge reverse from negative to positive. After the solid substrate with DDAB was immersed in a hemoglobin (Hb) solution at pH 9.0, the negatively charged Hb was adsorbed on the surface of DDAB layer by electrostatic attraction, forming a DDAB/Hb film. By repeating this adsorption cycle, the {DDAB/Hb}(n) layer-by-layer films were assembled on solid surfaces, which was confirmed by UV-vis spectroscopy, quartz crystal microbalance (QCM), and cyclic voltammetry (CV). The stable {DDAB/Hb}(n) films assembled on pyrolytic graphite (PG) electrodes showed two pairs of nearly reversible redox peaks at about -0.22 and -1.14 V vs SCE in pH 7.0 buffers, characteristic of the Hb heme Fe(III)/Fe(II) and Fe(II)/Fe(I) redox couples, respectively. The direct electrochemistry of Hb in the films could be used to electrocatalyze reduction of various substrates. UV-vis and IR spectroscopic results and comparison experiments with {DDAB/hemin}(n) films indicate that Hb in the {DDAB/Hb}(n) films essentially retains its native structure. Atomic force microscopy (AFM) was used to characterize the morphology of the films with different outermost layers.     

Electroactive layer-by-layer films of heme protein-coated polystyrene latex beads with poly(styrene sulfonate)

In this work, a novel two-step construction strategy for protein layer-by-layer assembly films was proposed. In the first step, positively charged hemoglobin (Hb) or myoglobin (Mb) at pH 5.0 was adsorbed on the negatively charged surface of 500 nm diameter-sized polystyrene (PS) latex beads, forming core-shell structured PS-protein particles. In the next step, the PS-protein particles were further assembled layer by layer with oppositely charged poly(styrene sulfonate)(PSS) on various solid surfaces under suitable conditions. Cyclic voltammetry (CV), quartz crystal microbalance (QCM), and UV-vis spectroscopy were used to monitor the growth of {(PS-protein)/PSS}(n) films. The stable {(PS-protein)/PSS}(n) films modified on pyrolytic graphite (PG) electrodes demonstrated good electroactivity in protein-free buffer, which was originated from protein heme Fe(III)/Fe(II) redox couples, and the electroactivity extended to six (PS-protein)/PSS bilayers. UV-vis spectroscopy showed that Hb and Mb in the films retained their near-native structure in the medium pH range. {(PS-protein)/PSS}(n) films catalyzed electrochemical reduction of oxygen, hydrogen peroxide, trichloroacetic acid (TCA) and nitrite with a significant lowering of overpotential, and displayed better catalytic activity than corresponding cast PS-protein films.     

血红蛋白在碳纳米管修饰碳糊电极上的直接电化学行为

利用吸附法将血红蛋白(Hb)固定在碳纳米管修饰碳糊电极表面,制成稳定的固载Hb碳纳米管修饰电极,研究了Hb在碳纳米管修饰电极上的直接电化学行为.固载Hb的碳纳米管修饰电极在pH=7.0的PBS（磷酸盐缓冲溶液）中有一对相当可逆的循环伏安氧化还原峰,为Hb血红素辅基Fe(Ⅲ)/Fe(Ⅱ)电对的特征峰.式电位为－0.160 V(vs SCE),随扫描速度变化很小.电子转移数为1.021,近似为一个辅基发生电子转移.Hb在碳纳米管修饰电极表面的电子转移常数为0.0816 s－1,远大于亚甲蓝作媒介体时Hb的电子转移反应速率常数.应用于过氧化氢、三氯乙酸和硝基苯等的电催化还原,固定在碳纳米管修饰碳糊电极的血红蛋白表现出稳定且较高的催化活性.     

血红蛋白过氧化物模拟酶胶束催化显色体系

在胶束Tween80介质中，研究了以血红蛋白（hemoglobin,Hb)作为过氧化物模拟酶、隐性亮绿（recessive brilliant green,RGB)为氢供体底物、溶解氧为受氢体的酶催化反应特性。在pH5.64(NH4)2HPO4-KH2PO4缓冲溶液中，利用模拟酶对溶解氧作为受氢体催化RBG氧化生成亮绿（brilliant green,BG)而拟定了测定Hb含量的新方法。讨论了胶束介质对酶体系催化反应的影响及酶催化反应的可能机理。     

聚苯并咪唑-漆酶复合物修饰电极无电子传递媒介体催化氧还原性能

采用循环伏安法将聚苯并咪唑和漆酶的复合物共沉积在玻碳电极表面。 制备的漆酶基电极在O2气饱和的磷酸盐缓冲液中可以观察到明显的催化还原电流,实现了无媒介体的酶-电极间直接电子迁移,电极静止时氧还原起始电位为645 mV,近于漆酶活性位T1的式电位580 mV,而极限扩散催化电流密度可达318.5×10-6 A/cm2。 但由于O2气在致密的固酶导电聚合物修饰层中扩散不够快(扩散系数只有在溶液中的1.25％),导致电极以较高速度旋转时极限扩散催化电流密度仅仅增加到1×10-3 A/cm2。 根据静态时极限催化电流密度求算得到的固定漆酶催化氧还原平均转化率为21.7/s。 这种漆酶基电极具有良好的重现性和长期使用性(储存10 d后催化活力仍然保持了初始值的80％以上),在人体生理温度和弱酸性条件下具有最佳催化活力。 这种漆酶基电极作为氧传感器具有良好的传感性能：检测限低(0.5 μmol/L),灵敏度高(71.1 μA·L/mmol),且对O2具有良好的亲和力(KM=89.9 μmol/L)。