AFM单分子力谱在真实材料及生物体系中的应用——挑战与机遇并存

基于原子力显微镜技术（AFM）的单分子力谱是研究分子间分子内相互作用的有效手段．为了简化样品体系及数据的解析,真实的生物或材料体系通常被简化,其中的目标分子被提取并桥连于AFM的针尖与固体基片之间进行研究,这是认识真实体系的有效途径．随着技术的不断进步（包括样品固定方法的改进）,使得直接研究真实生物及材料体系中的各种弱相互作用成为可能,此种条件下获得的信息对相关生命过程的调控及高性能材料的设计更具指导意义．本文概述了近几年基于AFM力谱技术在活体细胞以及高分子材料领域的研究进展,分析了存在的主要问题,并对相关领域的未来进行了展望．     

毛细管电泳分析中的富集技术及其应用

毛细管电泳（CE）具有分析速度快、分离效率高、样品消耗少、成本低廉等优点,已被应用于无机离子、有机小分子、蛋白质、核酸及细胞等的分析中。CE中最常用的检测方式是紫外检测（UV）,但由于常规进样样品体积小、检测光程短,CE-UV的灵敏度往往不能满足复杂样品中痕量物质直接分析的要求。CE中的在柱富集技术包括堆积、动态pH界面、吹扫和瞬间等速电泳等,可在很大程度上提高CE-UV的检测灵敏度;另外,固相和液相微萃取技术及其与在柱富集技术相结合应用在CE中也能净化样品基质,进一步提高富集倍数,改善分析灵敏度,从而拓宽了CE-UV在复杂样品分析中的应用范围。     

Recent advances and applications of molecularly imprinted polymers in solid‐phase extraction for real sample analysis

Sample pretreatment is essential for the analysis of complicated real samples due to their complex matrices and low analyte concentrations. Among all sample pretreatment methods, solid‐phase extraction is arguably the most frequently used one. However, the majority of available solid‐phase extraction adsorbents suffer from limited selectivity. Molecularly imprinted polymers are a type of tailor‐made artificial antibodies and receptors with specific recognition sites for target molecules. Using molecularly imprinted polymers instead of conventional adsorbents can greatly improve the selectivity of solid‐phase extraction, and therefore molecularly imprinted polymer‐based solid‐phase extraction has been widely applied to separation, clean up and/or preconcentration of target analytes in various kinds of real samples. In this article, after a brief introduction, the recent developments and applications of molecularly imprinted polymer‐based solid‐phase extraction for determination of different analytes in complicated real samples during the 2015‐2020 are reviewed systematically, including the solid‐phase extraction modes, molecularly imprinted adsorbent types and their preparations, and the practical applications of solid‐phase extraction to various real samples (environmental, food, biological, and pharmaceutical samples). Finally, the challenges and opportunities of using molecularly imprinted polymer‐based solid‐phase extraction for real sample analysis are discussed.     

Recording the real sample distribution and concentration/time functions in flow injection analysis

A flow-injection system with zone sampling is proposed which enables images representing the real sample distribution at any time after injection to be obtained, and the concentration/time function to be monitored at any point of the analytical path. These images provide information on the mixing conditions of the system and the interaction between the injected sample and the carrier stream in real situations. It is intended to complement theoretical studies of dispersion in flow injection analysis.     

一种双光束红外光谱及其在气固相多相催化反应实时原位表征中的应用

单光束红外光谱技术(原位傅立叶透射变换红外、原位漫反射红外和衰减全反射红外光谱技术)虽然已经用于气固相多相催化反应的原位表征中,但这些光谱在真实反应条件下会受到气体分子振动光谱和加热条件下产生的发射光谱的严重影响,不能实时获得催化剂表面的真实信息.另外,由于在真实的气固相多相催化反应过程中,催化剂本底的信息会随着反应时间的延长而发生变化,因此单光束红外光谱技术在扣除本底信息方面存在误差.为了实现在反应条件下,实时、原位表征催化剂表面的状态,我们报道了一种双光束红外光谱表征技术.该技术包括双光束红外光谱系统及双光束红外反应池.其特征在于:实时双光束原位红外光谱系统由两台完全相同的红外光谱仪和双光束红外反应池组成.双光束红外反应池由完全相同的样品池和参考池连接而成,样品池和参考池处于同一水平线上分别对应于样品光谱仪和参考光谱仪,由计算机同步控制两台红外光谱仪,排除实时状态下的气体分子振动光谱干扰和加热条件下产生的发射光谱干扰.该技术可以对真实反应条件下的气固相多相催化反应进行实时原位表征.通过应用程序的关联可以实时、同步采集样品光束和背景光束谱图来得到催化剂表面物种随反应时间变化的真实信息.该技术克服了单光束红外光谱在原位多相催化反应表征方面的缺陷,使表征结果变得更加精确可靠.该技术还可以在变化的气相组分条件下,获得不同温度下、实时的催化剂表面活性中心、活性相和中间物种的信息.采用上述双光束红外光谱仪对丁烯在纳米HZSM-5催化剂上芳构化反应过程进行了实时、原位观测,首次在实际反应条件下,观察到了异丁烯在纳米HZSM-5沸石的表面Br?nsted酸中心上经历吸附、活化、聚合、环化等反应步骤生成芳烃的过程.     

Microfluidic integration for electrochemical biosensor applications

Electrochemical biosensors are particularly suitable for miniaturization and integration in microfluidic devices. Applications include the detection of whole cells, cell components, proteins, and small molecules to address tasks in the fields of diagnostics and food and environmental control. Microfluidic setups range from simple channels for sample transport to channels with integrated sensing electrodes to highly sophisticated platforms with additional elements for sample preparation. The design of the microfluidics depends on both the type of detection and on the application and sample material. This review summarizes recent work on electrochemical biosensors with integrated microfluidics with the focus on developments for real sample applications, particularly those including measurements with real sample media.     

On the Determination of Ultra-trace Amounts of Selenium Using the Twice Hydride Generation -Gaseous Phase Enrichment Techniques and Atomic Fluorescence Spectrometry

Selenium is the one of the most particularly element to human health. This property has been recognized as an essential nutrient and toxicity at same time for humans. The toxicity and essential nature of Se depend on its concentration, which is within a very narrow range from 0.005 ppm to 3.0 ppm. It is strongly required often to investigate the trace selenium in order to understand the processes of elemental cycles in real samples. However,the direct determination of selenium content and chemical species is very difficult because of their extremely low concentrations and complicated characteristics. Hydride generation technique, which offers the advantages of chemical pre-separation from matrix, more efficient sample introduction, has been widely used in real sample analysis. However, except the so-called "in situ pre-concentration techniques" (trapped in graphite furnace and determined by AAS), the investigation of other gaseous phase enrichment techniques has not been noticed enough.     

Combination of flow injection analysis and voltammetry

The flow injection analyzer for students, teaching and research (FIAstar) is used in conjunction with a new micropool mercury flow-through electrode, to explore the possibilities offered by using d.c. polarography, rapid scan and amperometric titrations on a dispersed sample zone in motion. The work outlines the principles of the use of a scanning detector for investigation of the concentration gradients and chemical reactions taking place during the dispersion of sample solution within a carrier stream. The data, which are collected in real time, are displayed in three-dimensional diagrams.     

Electrocatalytic Sensor for the Determination of Chemical Oxygen Demand Using a Lead Dioxide Modified Electrode

An amperometric method that makes use of a nano‐PbO₂ modified electrode as an electrocatalytic sensor for the determination of chemical oxygen demand (COD) is described. The sensor signal was observed as a result of the detection of the oxidation current due to electrocatalytic oxidation of organic compounds in the sample solution. This sensor responded linearly to the COD_Cr of standard samples in the range of 5–3 000 ppm and the detection limit was 2.5 ppm. When using the sensor to determine real samples, it displays short analysis time, simplicity and no sample pretreatment. The sensor was stable for over 20 days in real wastewater samples and has successfully been applied to the determination of COD in real wastewater samples.     

一种新型硝化抑制剂的毛细管电泳与电色谱分析比较

本研究采用毛细管电泳与电色谱两种方法,在优化分离条件下将3,5-二甲基吡唑新型硝化抑制剂与土壤样品中的其它成分进行分离。通过比较其检出限及标准工作曲线证明:两种方法定量准确度相近,但毛细管电色谱法在实际样品的分离中具有明显的优势,是进一步研究该新产品的较好的分离分析方法。     

Characterisation of a gas-diffusion membrane-based optical flow-through sensor exemplified by the determination of nitrite

A membrane-based optical flow-through sensor is described which can be alternatively used for absorbance and reflectance detection within the receiver channel of a sandwich-type gas-diffusion separation cell. Using the common spectrophotometric detection scheme for nitrite based on azo-dye formation, the principle features of the flow-through sensor are investigated and the performance is characterised particularly with regard to selectivity and sensitivity aspects. The determination of nitrite in waste waters and meat extracts was used to demonstrate the applicability to real sample analysis. The main advantage of the proposed flow-through sensor is the absence of interferences due to sample colour and turbidity enabling direct sample admission of complex samples without tedious sample pretreatment.     

Method for on-line derivatization and separation of aspartic acid enantiomer in pharmaceuticals application by the coupling of flow injection with micellar electrokinetic chromatography

A novel, easy and accurate capillary electrophoresis (CE) coupled with flow injection (FI) method for the separation and determination of aspartic acid (Asp) enantiomers by on-line derivatization had been developed, and it had been applied to the real sample for the first time. The derivatization reagents were o-phthalaldehyde (OPA) and mercaptoethanol (ME), which were obtained easily, the chiral selector was beta-cyclodextrin (beta-CD), the micellar chemical was sodium dodecyl sulfate (SDS), and the modifier was methanol. By on-line derivatization, aspartic acid enantiomers were automatically and reproducibly converted to the ultraviolet (UV)-absorbing diastereoisomer derivates, which were separated by micellar electrokinetic chromatography (MEKC). According to the factors affecting the separation and sensitivity of aspartic acid enantiomer and other amino acids in the real sample, the pH value and concentration of the buffer, the concentration of beta-CD and SDS, the volume percentage of the methanol (v/v) in the buffer, the applied voltage and the conversion time were selected as the investigating variates. Under the investigated separation conditions, D-aspartic acid (D-Asp), L-aspartic acid (L-Asp) and other four amino acids achieved the baseline separation in not only the standard mixture of amino acids but also the real sample (Compound Amino Acid Injection (6AA)). The repeatability (defined as relative standard deviation (RSD), n = 5) was 4.0% and 4.0% with peak area evaluation, and 4.2% and 3.7% with peak height evaluation for D-Asp and L-Asp in the real sample. Recovery at added standard levels of 1.0, 3.0 and 6.0 mM was 92%, 104% and 109%, respectively.     

Estimation of the real temperature of samples in IR cell using OH frequency of silica

The peak top frequency of the stretching vibration of hydroxyl (OH) groups on amorphous silica reversibly changes accompanied by the change of the sample in temperature under the constant concentration. Using this phenomenon, the estimation of the real temperatures of samples in infrared (IR) cell can be achieved. The temperatures measured from outside the cell are first calibrated to real ones. The OH frequency of silica can be correlated to the real temperature of the sample inside the cell via the calibration of the measured and the real temperatures of samples in each IR cell. Copyright © 2014 John Wiley & Sons, Ltd.     

Simulating systematic errors in X-ray absorption spectroscopy experiments: Sample and beam effects

The article presents an analytical model to simulate experimental imperfections in the realization of an X-ray absorption spectroscopy experiment, performed in transmission or fluorescence mode. Distinction is made between sources of systematic errors on a time-scale basis, to select the more appropriate model for their handling. For short time-scale, statistical models are the most suited. For large time-scale, the model is developed for sample and beam imperfections: mainly sample inhomogeneity, sample self-absorption, beam achromaticity. The ability of this model to reproduce the effects of these imperfections is exemplified, and the model is validated on real samples. Various potential application fields of the model are then presented.     

混合物定性定量分析的分枝定界算法

已知被测体系可能存在的物种范围, 但其确含何种物质及相应浓度必须经分析方可确定, 实为分析化学实践中常见的一类分析体系。基于分枝定界原理, 本文提出一种直接对其进行定性定量解析的光谱多元分析算法, 可显著减少计算量,却无失去真实信息的风险。对实际紫外可见及荧光混合物光谱进行解析, 均获满意结果。     

3-D nanoporous gold thin film for the simultaneous electrochemical determination of dopamine and ascorbic acid

In this study, we demonstrated a novel fabrication method of three dimensional nanoporous gold thin film (NPGF) onto gold (Au) substrate using electrochemical deposition method. Scanning electron microscope (SEM) investigation reveals the formation of highly-ordered pores, approximately 30 nm in diameter and 150 nm thick. The NPGF-modified electrode shows a linear range (0.1–40 μM) for dopamine detection in the presence of ascorbic acid. The electrochemical measurements of mixtures of dopamine, ascorbic acid, and uric acid in human serum sample for real sample applications was also investigated based on differential pulse voltammetry (DPV) technique. These high sensitivity and selectivity features of the proposed NPGF biosensor offer great promise for real sample biosensor application.     

The Optimal Control of Geometry and Voltage Parameters on Electrokinetic Transport to Avoid Sample Leakage in Microfluidic Chips

Computer simulation is used to investigate sample transport phenomena of cross microfluidic chips. In this study, Kirchhoff circuit theory is employed to calculate the electric field strength and approximate electroosmotic flow. It is apparent from the results that both the simulation and the theoretical data show similar trends in the electroosmosis of cross microchips. The main target in this study is to summarize the optimal controlling parameter values for avoiding sample leakage in the transport process. The effects of the applied voltage ratio, the geometry ratio and the zeta potential were simulated using a computational fluid dynamics and multiphysics solver software package (CFD-ACE+). Under our designed conditions, two major conclusions were reached: (1) for high-voltage ratios, the sample leakage can be avoided as the geometry ratio is large enough at 0.5 or greater, and (2) for small geometries, maintaining a smaller voltage ratio, 0.3 or less, is essential for avoiding sample leakage. The key is to govern the sample velocity in the upstream faster than that in the downstream. Although real experimental conditions can be further fine tuned under microscopy monitoring, these conclusions are helpful to design the proper channel geometry and set up suitable voltage parameters to avoid sample leakages in one cross-channel chip.     

Analyses of polychlorinated biphenyls in waters and wastewaters using vortex-assisted liquid-liquid microextraction and gas chromatography-mass spectrometry

A method was developed for viable and rapid determination of seven polychlorinated biphenyls (PCBs) in water samples with vortex-assisted liquid-liquid microextraction (VALLME) using gas chromatography-mass spectrometry (GC-MS). At first, the most suitable extraction solvent and extraction solvent volume were determined. Later, the parameters affecting the extraction efficiency such as vortex extraction time, rotational speed of the vortex, and ionic strength of the sample were optimized by using a 2(3) factorial experimental design. The optimized extraction conditions for 5 mL water sample were as follows: extractant solvent 200 μL of chloroform; vortex extraction time of 2 min at 3000 rpm; centrifugation 5 min at 4000 rpm, and no ionic strength. Under the optimum condition, limits of detection (LOD) ranged from 0.36 to 0.73 ng/L. Mean recoveries of PCBs from fortified water samples are 96% for three different fortification levels and RSDs of the recoveries are below 5%. The developed procedure was successfully applied to the determination of PCBs in real water and wastewater samples such as tap, well, surface, bottled waters, and municipal, treated municipal, and industrial wastewaters. The performance of the proposed method was compared with traditional liquid-liquid extraction (LLE) of real water samples and the results show that efficiency of proposed method is comparable to the LLE. However, the proposed method offers several advantages, i.e. reducing sample requirement for measurement of target compounds, less solvent consumption, and reducing the costs associated with solvent purchase and waste disposal. It is also viable, rapid, and easy to use for the analyses of PCBs in water samples by using GC-MS.     

Stripping Voltammetry for the Real Time Determination of Zinc Membrane Diffusion Coefficients in High pH: Towards Rapid Screening of Alkaline Battery Separators

An anodic stripping voltammetry (ASV) sensing platform which provides real time determination of zincate diffusion through membrane separators in alkaline electrolyte with total experimental times on the order of hours is presented. Advanced separators are essential for future rechargeable alkaline zinc batteries. In order to be screened, these membranes need to be evaluated for their zincate blocking performance. Current complexometric titration and elemental analysis methods for zincate membrane diffusion characterization can take days to weeks to obtain results as well as include large sample dilution factors and require additional sample processing. The anodic stripping voltammetry (ASV) sensing platform presented here provides real time determination of zincate diffusion in alkaline electrolyte with total experimental times on the order of hours. This method eliminates the need for sample dilution and post experiment sample processing. This technique significantly increases the throughput for the screening of advanced alkaline battery separators resulting in rapid turnaround times in the analysis of these vital membranes. To evaluate the utility of this method, zincate diffusion through commercial Celgard 3501 and Cellophane 350P00 was monitored using both ASV and inductively coupled plasma‐mass spectrometry (ICP‐MS) methods. The obtained zincate diffusion coefficients for both techniques were found to compare favorably.     

Comparison of dual solvent-stir bars microextraction and U-shaped hollow fiber-liquid phase microextraction for the analysis of Sudan dyes in food samples by high-performance liquid chromatography-ultraviolet/mass spectrometry

Two sample preparation methods, dual solvent-stir bars microextraction (DSSBME) and U-shaped hollow fiber-liquid phase microextraction (U-shaped HF-LPME), are proposed and critically compared for high-performance liquid chromatography (HPLC)-ultraviolet (UV)/mass spectrometry (MS) analysis of Sudan dyes in this paper. In DSSBME, the organic solvent was confined to a pair of hollow fiber membrane fixed on a stir bar, which can stir by itself, while the hollow fiber in U-shaped HF-LPME was fixed by two microsyringes. The significant factors affecting the microextraction of Sudan dyes in both microextraction techniques have been examined and no obvious difference in the effect of extraction solvent, pH and salt concentration on the extraction efficiency of Sudan dyes was observed except extraction time and stirring speed. Both microextraction techniques were similar in terms of analytical performance from aqueous solutions (LODs ranged from 0.09 to 0.95 microgL(-1) by HPLC-UV and 2.5-6.2 microgL(-1) by HPLC-MS; the absolute LODs ranged from 0.9 to 11.25 pg by HPLC-UV and 5-21.2 pg by HPLC-MS), however, DSSBME was more stable (lower stirring speed required), less sample consuming and much shorter time required to reach extraction equilibrium; while U-shaped HF-LPME was easier to operate and no more special device required. The two microextraction techniques combined with HPLC-UV/MS were successfully applied to the analysis of real samples including strawberry sauce, capsicum oil, salted egg, and two kinds of chilli sauce. Although the LODs of HPLC-UV are lower than that of HPLC-MS by a factor of 10 in this work, the absolute LODs for both HPLC-UV and HPLC-MS are comparable. HPLC-UV cannot identify the suspicious peaks at the same retention time as that of Sudan II and III in salted egg, while HPLC-MS can give exact information of Sudan I-IV in real sample analysis and is more reliable. The sensitivity of HPLC-MS is enough for real sample analysis.