Two‐dimensional prediction of time dependent,turbulent flow around a square cylinder confined in a channel

This paper presents two‐dimensional and unsteady RANS computations of time dependent, periodic, turbulent flow around a square block. Two turbulence models are used: the Launder–Sharma low‐Reynolds number k–ε model and a non‐linear extension sensitive to the anisotropy of turbulence. The Reynolds number based on the free stream velocity and obstacle side is Re=2.2×10⁴. The present numerical results have been obtained using a finite volume code that solves the governing equations in a vertical plane, located at the lateral mid‐point of the channel. The pressure field is obtained with the SIMPLE algorithm. A bounded version of the third‐order QUICK scheme is used for the convective terms. Comparisons of the numerical results with the experimental data indicate that a preliminary steady solution of the governing equations using the linear k–ε does not lead to correct flow field predictions in the wake region downstream of the square cylinder. Consequently, the time derivatives of dependent variables are included in the transport equations and are discretized using the second‐order Crank–Nicolson scheme. The unsteady computations using the linear and non‐linear k–ε models significantly improve the velocity field predictions. However, the linear k–ε shows a number of predictive deficiencies, even in unsteady flow computations, especially in the prediction of the turbulence field. The introduction of a non‐linear k–ε model brings the two‐dimensional unsteady predictions of the time‐averaged velocity and turbulence fields and also the predicted values of the global parameters such as the Strouhal number and the drag coefficient to close agreement with the data. Copyright © 2009 John Wiley & Sons, Ltd.     

Calculation of three‐dimensional turbulent flow with a finite volume multigrid method

A numerical method for the efficient calculation of three‐dimensional incompressible turbulent flow in curvilinear co‐ordinates is presented. The mathematical model consists of the Reynolds averaged Navier–Stokes equations and the k–ε turbulence model. The numerical method is based on the SIMPLE pressure‐correction algorithm with finite volume discretization in curvilinear co‐ordinates. To accelerate the convergence of the solution method a full approximation scheme‐full multigrid (FAS‐FMG) method is utilized. The solution of the k–ε transport equations is embedded in the multigrid iteration. The improved convergence characteristic of the multigrid method is demonstrated by means of several calculations of three‐dimensional flow cases. Copyright © 1999 John Wiley & Sons, Ltd.     

连续分层海洋中内波传播的一种数值模式

基于Euler方程,使用有限体积法建立了一种密度为连续分层情况下、适应水深变化的水域中内波传播的数值模式.为了使计算格式能够达到二阶精度,对流项的处理使用了TVD (total variation diminishing)格式.将SIMPLE算法引入连续分层海洋中内波的数值计算,为了简化计算并方便地适应多种TVD格式,在计算预估速度场时采用了显式格式,而没有采用传统的隐式格式;鉴于在原始的SIMPLE算法中没有涉及到由于密度扰动而引起的静水压力场的改变问题,给出了该问题的计算方法.因此改进了SIMPLE算法.出流边界的处理采用阻尼消波和Sommerfeld辐射条件相结合的方式,以使内波得到有效的衰减和释放.将等水深水域的数值解和理论解进行了比较,两者吻合较好;并对存在潜堤时数值计算的不同时刻密度变化的空间分布进行了详细的定性分析.计算结果表明,所建立的数值模式能有效地模拟内波的传播和变形.      

Numerical simulation of a single bubble by compressible two‐phase fluids

The present work deals with the numerical investigation of a collapsing bubble in a liquid–gas fluid, which is modeled as a single compressible medium. The medium is characterized by the stiffened gas law using different material parameters for the two phases. For the discretization of the stiffened gas model, the approach of Saurel and Abgrall is employed where the flow equations, here the Euler equations, for the conserved quantities are approximated by a finite volume scheme, and an upwind discretization is used for the non‐conservative transport equations of the pressure law coefficients. The original first‐order discretization is extended to higher order applying second‐order ENO reconstruction to the primitive variables. The derivation of the non‐conservative upwind discretization for the phase indicator, here the gas fraction, is presented for arbitrary unstructured grids. The efficiency of the numerical scheme is significantly improved by employing local grid adaptation. For this purpose, multiscale‐based grid adaptation is used in combination with a multilevel time stepping strategy to avoid small time steps for coarse cells. The resulting numerical scheme is then applied to the numerical investigation of the 2‐D axisymmetric collapse of a gas bubble in a free flow field and near to a rigid wall. The numerical investigation predicts physical features such as bubble collapse, bubble splitting and the formation of a liquid jet that can be observed in experiments with laser‐induced cavitation bubbles. Opposite to the experiments, the computations reveal insight to the state inside the bubble clearly indicating that these features are caused by the acceleration of the gas due to shock wave focusing and reflection as well as wave interaction processes. While incompressible models have been used to provide useful predictions on the change of the bubble shape of a collapsing bubble near a solid boundary, we wish to study the effects of shock wave emissions into the ambient liquid on the bubble collapse, a phenomenon that may not be captured using an incompressible fluid model. Copyright © 2009 John Wiley & Sons, Ltd.     

Multigrid solution of the incompressible Navier–Stokes equations for three‐dimensional recirculating flow: coupled and decoupled smoothers compared

A comparison of multigrid methods for solving the incompressible Navier–Stokes equations in three dimensions is presented. The continuous equations are discretised on staggered grids using a second‐order monotonic scheme for the convective terms and implemented in defect correction form. The convergence characteristics of a decoupled method (SIMPLE) are compared with those of the cellwise coupled method (SCGS). The convergence rates obtained for computations of the three‐dimensional lid‐driven cavity problem are found to be very similar to those obtained for computations of the corresponding two‐dimensional problem with comparable grid density. Although the convergence rate of SCGS is thus superior to that of SIMPLE, the decoupled method is found to be more efficient computationally and requires less computing time for a given level of convergence. The linewise implementation of the coupled method (CLGS) is also investigated and shown to be more efficient than SCGS, although the convergence rate and computing time required per cycle are both found to depend on the direction of sweep. The optimal implementation of CLGS is found to be only marginally more effective than SIMPLE, but a change to the structure of the data storage would increase the advantage. Copyright © 1999 John Wiley & Sons, Ltd.     

A semi‐implicit scheme for large Eddy simulation of piston engine flow and combustion

A semi‐implicit scheme is presented for large eddy simulation of turbulent reactive flow and combustion in reciprocating piston engines. First, the governing equations in a deforming coordinate system are formulated to accommodate the moving piston. The numerical scheme is made up of a fourth‐order central difference for the diffusion terms in the transport equations and a fifth‐order weighted essentially nonoscillatory (WENO) scheme for the convective terms. A second‐ order Adams–Bashforth scheme is used for time integration. For higher density ratios, it is combined with a predictor–corrector scheme. The numerical scheme is explicit for time integration of the transport equations, except for the continuity equation which is used together with the momentum equation to determine the pressure field and velocity field by using a Poisson equation for the pressure correction field. The scheme is aimed at the simulation of low Mach number flows typically found in piston engines. An efficient multigrid method that can handle high grid aspect ratio is presented for solving the pressure correction equation. The numerical scheme is evaluated on two test engines, a laboratory four‐stroke engine with rectangular‐shaped engine geometry where detailed velocity measurements are available, and a modified truck engine with practical cylinder geometry where lean ethanol/air mixture is combusted under a homogeneous charge compression ignition (HCCI) condition. Copyright © 2012 John Wiley & Sons, Ltd.     

合金凝固过程的数学模型

对合金凝固过程的数值研究自80年代以来取得了很大的发展,文中讨论了当前针对宏观过程的主要的数学模型,介绍了它们的基本思想,求解方法,以及优缺点.指出了微观过程对宏观行为的重要影响及在模型构造过程中考虑宏观-微观耦合的必要性,并针对在工程实际中的应用和以后的研究进行了有关的探讨.      

Eutectic solidification patterns: Interest of microgravity environment

The solidification of binary eutectic alloys produces two-phase composite materials in which the microstructure, that is, the geometrical distribution of the two solid phases, results from complex pattern-formation processes at the moving solid–liquid interface. Since the volume fraction of the two solids depends on the local composition, solidification dynamics can be strongly influenced by thermosolutal convection in the liquid. In this contribution, we review our experimental and numerical work devoted to the understanding of eutectic solidification under purely diffusive conditions, which will soon be tested and extended during the microgravity experiment TRANSPARENT ALLOYS planned by the European Space Agency (ESA).     

Numerical simulation of the unsteady behaviour of cavitating flows

A 2D numerical model is proposed to simulate unsteady cavitating flows. The Reynolds‐averaged Navier–Stokes equations are solved for the mixture of liquid and vapour, which is considered as a single fluid with variable density. The vapourization and condensation processes are controlled by a barotropic state law that relates the fluid density to the pressure variations. The numerical resolution is a pressure‐correction method derived from the SIMPLE algorithm, with a finite volume discretization. The standard scheme is slightly modified to take into account the cavitation phenomenon. That numerical model is used to calculate unsteady cavitating flows in two Venturi type sections. The choice of the turbulence model is discussed, and the standard RNG k–εmodel is found to lead to non‐physical stable cavities. A modified k–εmodel is proposed to improve the simulation. The influence of numerical and physical parameters is presented, and the numerical results are compared to previous experimental observations and measurements. The proposed model seems to describe the unsteady cavitation behaviour in 2D geometries well. Copyright © 2003 John Wiley & Sons, Ltd.     

A multi‐moment transport model on cubed‐sphere grid

A conservative, single‐cell‐based semi‐Lagrangian transport model is proposed in this paper. Using multi‐moment concept, an additional moment, i.e. volume‐integrated average (VIA), is treated as the model variable besides the point value (PV) updated in the traditional semi‐Lagrangian schemes. A quadratic interpolation function is constructed based on local degrees of freedom defined within each single cell. The PV moment is advanced by the semi‐Lagrangian formulation, whereas the VIA moment is updated by a finite volume formulation to rigorously ensure the numerical conservation. The numerical fluxes are computed from the PV moments defined along the boundary edges of the control volume. The scheme is extended to the spherical geometry through the application of the cubed‐sphere grid that eliminates the polar singularity in the conventional longitude/latitude coordinates by using the quasi‐uniform grid spacing covering the whole sphere. The single‐cell‐based scheme is well suited for the treatment of the connections between different patches. A simple quasi‐monotone limiter to the PV moment is applied to suppress non‐physical oscillations. The proposed scheme has been validated via representative benchmark tests and the performance is competitive to other existing transport schemes. Copyright © 2010 John Wiley & Sons, Ltd.     

A well‐balanced weighted essentially non‐oscillatory scheme for pollutant transport in shallow water

In this paper, a well‐balanced finite difference weighted essentially non‐oscillatory scheme is presented for modeling transport and diffusion of pollutant in shallow water flows. The scheme balances exactly the flux gradients and the source terms. Extensive one‐dimensional and two‐dimensional numerical experiments on uniform and curvilinear meshes strongly suggest that high resolution results are achieved for both water depth and pollutant concentration. The scheme is efficient and robust and can be applied to practical numerical simulation of pollutant transport phenomena in shallow water flows. Copyright © 2012 John Wiley & Sons, Ltd.     

Central schemes for open‐channel flow

The resolution of the Saint‐Venant equations for modelling shock phenomena in open‐channel flow by using the second‐order central schemes of Nessyahu and Tadmor (NT) and Kurganov and Tadmor (KT) is presented. The performances of the two schemes that we have extended to the non‐homogeneous case and that of the classical first‐order Lax–Friedrichs (LF) scheme in predicting dam‐break and hydraulic jumps in rectangular open channels are investigated on the basis of different numerical and physical conditions. The efficiency and robustness of the schemes are tested by comparing model results with analytical or experimental solutions. Copyright © 2003 John Wiley & Sons, Ltd.     

Numerical study of breaking waves by a two‐phase flow model

A two‐phase flow model, which solves the flow in the air and water simultaneously, is presented for modelling breaking waves in deep and shallow water, including wave pre‐breaking, overturning and post‐breaking processes. The model is based on the Reynolds‐averaged Navier–Stokes equations with the k ?ε turbulence model. The governing equations are solved by the finite volume method in a Cartesian staggered grid and the partial cell treatment is implemented to deal with complex geometries. The SIMPLE algorithm is utilised for the pressure‐velocity coupling and the air‐water interface is modelled by the interface capturing method via a high resolution volume of fluid scheme. The numerical model is validated by simulating overturning waves on a sloping beach and over a reef, and deep‐water breaking waves in a periodic domain, in which good agreement between numerical results and available experimental measurements for the water surface profiles during wave overturning is obtained. The overturning jet, air entrainment and splash‐up during wave breaking have been captured by the two‐phase flow model, which demonstrates the capability of the model to simulate free surface flow and wave breaking problems.Copyright © 2011 John Wiley & Sons, Ltd.     

A hybrid pressure‐based solver for nonideal single‐phase fluid flows at all speeds

This paper describes the implementation of a numerical solver that is capable of simulating compressible flows of nonideal single‐phase fluids. The proposed method can be applied to arbitrary equations of state and is suitable for all Mach numbers. The pressure‐based solver uses the operator‐splitting technique and is based on the PISO/SIMPLE algorithm: the density, velocity, and temperature fields are predicted by solving the linearized versions of the balance equations using the convective fluxes from the previous iteration or time step. The overall mass continuity is ensured by solving the pressure equation derived from the continuity equation, the momentum equation, and the equation of state. Nonphysical oscillations of the numerical solution near discontinuities are damped using the Kurganov‐Tadmor/Kurganov‐Noelle‐Petrova (KT/KNP) scheme for convective fluxes. The solver was validated using different test cases, where analytical and/or numerical solutions are present or can be derived: (1) A convergent‐divergent nozzle with three different operating conditions; (2) the Riemann problem for the Peng‐Robinson equation of state; (3) the Riemann problem for the covolume equation of state; (4) the development of a laminar velocity profile in a circular pipe (also known as Poiseuille flow); (5) a laminar flow over a circular cylinder; (6) a subsonic flow over a backward‐facing step at low Reynolds numbers; (7) a transonic flow over the RAE 2822 airfoil; and (8) a supersonic flow around a blunt cylinder‐flare model. The spatial approximation order of the scheme is second order. The mesh convergence of the numerical solution was achieved for all cases. The accuracy order for highly compressible flows with discontinuities is close to first order and, for incompressible viscous flows, it is close to second order. The proposed solver is named rhoPimpleCentralFoam and is implemented in the open‐source CFD library OpenFOAM^®. For high speed flows, it shows a similar behavior as the KT/KNP schemes (implemented as rhoCentralFoam‐solver, Int. J. Numer. Meth. Fluids 2010), and for flows with small Mach numbers, it behaves like solvers that are based on the PISO/SIMPLE algorithm.     

Boundary domain integral method for transport phenomena in porous media

A boundary domain integral method (BDIM) for the solution of transport phenomena in porous media is presented. The complete, so‐called modified Navier–Stokes equations (Brinkman‐extended Darcy formulation with inertial term included) have been used to describe the fluid motion in porous media. Velocity–vorticity formulation (VVF) of the conservative equations is employed. In this paper, the proposed numerical scheme is tested on a particular case of natural convection and the results of flow and heat transfer characteristics of a fluid in a vertical porous cavity heated from the side and saturated with Newtonian fluid are presented in detail. Copyright © 2001 John Wiley & Sons, Ltd.     

The effect of solutal undercooling on double‐diffusive convection and macrosegregation during binary alloy solidification: a numerical investigation

In this paper, we present a macroscopic numerical model that is capable of capturing the interaction between the double‐diffusive convective field and a localized fluid flow on account of solutal undercooling during non‐equilibrium solidification of binary alloys. The model is essentially based on a fixed‐grid enthalpy based control volume approach. In the present model, microscopic features pertaining to non‐equilibrium effects on account of solutal undercooling are incorporated through the formulation of a modified partition‐coefficient. The effective partition‐coefficient is numerically modelled by means of a number of macroscopically observable parameters related to the solidifying domain. This feature has made the present treatment different from micro‐macro modelling of alloy solidification, which involves certain parameters that may not be macroscopically resolvable. Numerical simulations are performed for the case of two‐dimensional transient solidification of Pb–Sn alloys (both hypoeutectic and hypereutectic) in a rectangular cavity, employing the present model. The simulation results are also compared with the corresponding experimental results quoted in the literature, and the agreement is excellent. From the results, it can be concluded that non‐equilibrium effects on account of solutal undercooling result in a more enhanced macrosegregation. Copyright © 2002 John Wiley & Sons, Ltd.     

Numerical and experimental study of the traveling magnetic field effect on the horizontal solidification in a rectangular cavity part 2: Acting forces ratio and solidification parameters

In recent decades, many phase change processes in metals have been optimized using traveling magnetic fields due to a better understanding of their electromagnetic impact in such applications. In this paper, numerical and experimental study of the effect of traveling magnetic field on the solidification process was evaluated. A three-dimensional numerical model based on the multi-domain method was used to analyze the process of gallium horizontal solidification under the electromagnetic impact in a laboratory-size rectangular cavity. A linear inductor creating traveling magnetic field was designed and built for appropriate measurements and validation the calculations. The analysis was focused on the influence of the ratio between the applied electromagnetic forces and natural convective forces on the solidification front location and shape and on the velocity field. Since the overall electromagnetic force impact on the melt reduced during the solidification, when the melt area was converting into a solid, a new approach to control the solidification parameters was analyzed. In this approach, the value of electromagnetic force acting on the remaining melt during the process was maintained. The main result is the development and improvement of an effective tool for the analysis of direct solidification parameters.The experimental setup included an ultrasonic Doppler velocimeter (UDV) for noninvasive measurements of the velocities in the liquid part of the metal and the liquid-solid interface position, its profile and displacement. All important characteristics of the process were measured, and the results of computations agreed well enough with experimentally obtained data.     

A robust and well‐balanced scheme for the 2D Saint‐Venant system on unstructured meshes with friction source term

In the following lines, we propose a numerical scheme for the shallow‐water system supplemented by topography and friction source terms, in a 2D unstructured context. This work proposes an improved version of the well‐balanced and robust numerical model recently introduced by Duran et al. (J. Comp. Phys., 235 , 565–586, 2013) for the pre‐balanced shallow‐water equations, accounting for varying topography. The present work aims at relaxing the robustness condition and includes a friction term. To this purpose, the scheme is modified using a recent method, entirely based on a modified Riemann solver. This approach preserves the robustness and well‐balanced properties of the original scheme and prevents unstable computations in the presence of low water depths. A series of numerical experiments are devoted to highlighting the performances of the resulting scheme. Simulations involving dry areas, complex geometry and topography are proposed to validate the stability of the numerical model in the neighbourhood of wet/dry transitions. Copyright © 2015 John Wiley & Sons, Ltd.     

MOSQUITO: An efficient finite difference scheme for numerical simulation of 2D advection

An explicit finite difference method for the treatment of the advective terms in the 2D equation of unsteady scalar transport is presented. The scheme is a conditionally stable extension to two dimensions of the popular QUICKEST scheme. It is deduced imposing the vanishing of selected components of the truncation error for the case of steady uniform flow. The method is then extended to solve the conservative form of the depth‐averaged transport equation. Details of the accuracy and stability analysis of the numerical scheme with test case results are given, together with a comparison with other existing schemes suitable for the long‐term computations needed in environmental modelling. Although with a truncation error of formal order 0(ΔxΔt, ΔyΔt, Δt²), the present scheme is shown actually to be of an accuracy comparable with schemes of third‐order in space, while requiring a smaller computational effort and/or having better stability properties. In principle, the method can be easily extended to the 3D case. Copyright © 1999 John Wiley & Sons, Ltd.