Electrochemical Determination of Pyrogallol at Conducting Poly(3,4‐ethylenedioxythiophene) Film‐Modified Screen‐Printed Carbon Electrodes

The electrochemical oxidation of pyrogallol at electrogenerated poly(3,4‐ethylenedioxythiophene) (PEDOT) film‐modified screen‐printed carbon electrodes (SPCE) was investigated. The voltammetric peak for the oxidation of pyrogallol in a pH 7 buffer solution at the modified electrode occurred at 0.13 V, much lower than the bare SPCE and preanodized SPCE. The experimental parameters, including electropolymerization conditions, solution pH values and applied potentials were optimized to improve the voltammetric responses. A linear calibration plot, based on flow‐injection amperometry, was obtained for 1–1000 µM pyrogallol, and a slope of 0.030 µA/µM was obtained. The detection limit (S/N=3) was 0.63 µM.     

Electrochemical Behavior of Chloranil Chemically Modified Carbon Paste Electrode. Application to the Electrocatalytic Determination of Ascorbic Acid

A p‐chloranil modified carbon paste electrode was constructed and the electrochemical behavior of this electrode was studied in the aqueous solution with different pH. From the E_1/2–pH diagram for this compound the values of formal potential E^0' and pK_a of some different redox and acid‐base couples depending on the solution pH were estimated. The diffusion coefficient, D, value for p‐chloranil was estimated 1.5×10^?7 cm² s^?1. It has been shown by direct current cyclic voltammetry and double potential step chronoamperometry, that this p‐chloranil incorporated carbon paste electrode, can catalyze the oxidation of ascorbic acid in the aqueous buffered solution. Under the optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such an electrode occurs at a potential about 325 mV less positive than that at an unmodified carbon past electrode. The catalytic oxidation peak currents was linearly dependent on the ascorbic acid concentration and a linear calibration curve was obtained in the range of 7×10^?5 M–4×10^?3 M of ascorbic acid with a correlation coefficient of 0.9998. The limit of detection (3σ) was determined as 3.5×10 ^?5 M. This method was used as simple, selective and precise voltammetric method for determination of ascorbic acid in pharmaceutical preparations.     

Electrochemical Oxidation and Sensitive Determination of Acetaminophen in Pharmaceuticals at Poly(3,4‐ethylenedioxythiophene)‐Modified Screen‐Printed Electrodes

The current study reports electrocatalytic oxidation of acetaminophen at screen‐printed electrode (SPE) modified with electrogenerated poly(3,4‐ethylenedioxythiophene) (PEDOT) film. Cyclic voltammetric studies show that the SPE/PEDOT electrode lowers overpotentials and improves electrochemical behavior of acetaminophen (ACAP) in aqueous buffer solutions, compared to the bare SPE. Excellent analytical features are achieved, including high sensitivity, low detection limit and satisfactory dynamic range, by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and flow‐injection amperometry (FIA) under optimized conditions. The proposed methods obtain satisfactory results in detection of acetaminophen in two commercial tablets.     

尿酸在普鲁士蓝修饰电极上的电化学行为及其分析应用

用恒电位电解法制备了普鲁士蓝修饰玻碳电极,研究了尿酸(UA)在该电极上的电化学行为,并提出了一种新的用于检测UA的方法。在 0. 1mol/L(pH5. 0 )的醋酸缓冲溶液中, 0. 100mol/LKCl作为支持电解质,UA在普鲁士蓝修饰电极上于 0. 470V处产生一灵敏的氧化峰,方波伏安法测定其氧化峰电流与UA浓度在 2. 5×10-6 ~2. 0×10-4 mol/L范围内呈良好的线性关系,相关系数为 0. 9986,检出限为 1. 1×10-6 mol/L。该电极制作简单,重现性良好,可用于UA的测定。     

羧基化单层碳纳米管修饰电极的电化学表征及其电催化作用

碳纳米管自 1 991年被发现 [1] 以来 ,因其独特的力学、电子特性及化学稳定性 ,成为世界范围内的研究热点之一 .它可以认为是将石墨层折叠成碳圆柱体的结果 ,分为多层碳纳米管 ( MWNT)和单层碳纳米管 ( SWNT) .依据其原子结构不同 ,碳纳米管将表现为金属或半导体 ,这种独特的电子特性使它有望成为新型分子器件 .因此 ,研究这种新型碳结构的电极特性具有十分重要的意义 .MWNT与溴仿等混合后装在玻璃毛细管内制成微电极 ,可用于探测生物电化学反应 ,结果明显优于其它碳电极 [2 ,3] .对 SWNT的电化学行为研究得较少 .目前仅有一篇有关 S…     

Carbon Paste Electrode Incorporating 1‐[4‐(Ferrocenyl Ethynyl) Phenyl]‐1‐Ethanone for Electrocatalytic and Voltammetric Determination of Tryptophan

A carbon paste electrode spiked with 1‐[4‐ferrocenyl ethynyl) phenyl]‐1‐ethanone (4FEPE) was constructed by incorporation of 4FEPE in graphite powder‐paraffin oil matrix. It has been shown by direct current cyclic voltammetry and double step chronoamperometry that this electrode can catalyze the oxidation of tryptophan (Trp) in aqueous buffered solution. It has been found that under optimum condition (pH 7.00), the oxidation of Trp at the surface of such an electrode occurs at a potential about 200 mV less positive than at an unmodified carbon paste electrode. The kinetic parameters such as electron transfer coefficient, α and rate constant for the chemical reaction between Trp and redox sites in 4FEPE modified carbon paste electrode (4FEPEMCPE) were also determined using electrochemical approaches. The electrocatalytic oxidation peak current of Trp showed a linear dependent on the Trp concentrations and linear calibration curves were obtained in the ranges of 6.00×10^?6 M–3.35×10^?3 M and 8.50×10^?7 M–6.34×10^?5 M of Trp concentration with cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods, respectively. The detection limits (3σ) were determined as 1.80×10^?6 M and 5.60×10^?7 M by CV and DPV methods. This method was also examined as a selective, simple and precise new method for voltammetric determination of tryptophan in real sample.     

Determination of Tetracycline at a UV‐Irradiated DNA Film Modified Glassy Carbon Electrode

In this study, interaction of tetracycline (TC) and DNA in the Britton? Robinson buffer solution (BR) was studied by cyclic voltammetry. The experimental results reveal that TC can bind strongly to DNA and the association constant and binding number between TC and DNA was obtained. Then DNA was immobilized on a glassy carbon electrode by UV‐irradiation. Through this process, water‐soluble DNA was converted into insoluble materials, and a stable DNA film was formed on the electrode. The electrochemical oxidation behavior of TC was studied at UV‐irradiated DNA film modified glassy carbon electrode (UV‐DNA‐GCE). The response of modified electrode was optimized with respect to pH, accumulation time, ionic strength, drug concentration and other variables. TC at the surface of modified electrode showed a linear dynamic range of 0.30–90.00 µM and a detection limit of 0.27 µM. To demonstrate the applicability of the modified electrode, it was used for the analysis of real samples such as pharmaceutical formulations and milk.     

Adsorptive Stripping Voltammetric Determination of 4‐Hexylresorcinol in Pharmaceutical Products Using Multiwalled Carbon Nanotube Based Electrodes

A sensitive electroanalytical method is presented for the determination of 4‐hexylresorcinol using adsorptive stripping voltammetry (AdsSV) at a multiwalled carbon nanotube modified basal plane pyrolytic graphite electrode (MWCNT‐BPPGE). This method is also extended to the use of a MWCNT modified screen‐printed electrode (MWCNT‐SPE), thereby demonstrating that this approach can easily be incorporated into a facile and inexpensive electrochemical sensor.     

铁氰化镨修饰的电化学传感器的研制及其对半胱氨酸的测定

采用循环伏安法在PrCl3+K3Fe(CN)6溶液中于石墨电极表面电沉积铁氰化镨(PrHCF)薄膜,制备PrHCF修饰电极。对该修饰电极电化学的行为进行分析,包括扫描速度、K+浓度以及阴、阳离子对膜电极的影响。同时,以红外和XPS对膜进行了表征,IR谱图中氰基的伸缩振动峰证明了膜的存在;而XPS谱图中Fe2p1/2和Fe2p3/2能级的分裂说明了在成膜过程中Fe的价态发生变化,据此提出了可能的电聚合机理。同时,此修饰电极对半胱氨酸具有电催化氧化活性,并对其响应进行了研究。     

Voltammetric Determination of Leucoindigo Adsorbed on Pretreated Carbon Paste Electrodes: Its Application in a Flow System

The determination of leucoindigo adsorbed on the surface of pretreated carbon paste electrodes has been performed by cyclic (CV) and alternating current voltammetry (ACV). The water‐soluble compound called leucoindigo is obtained through the reduction of water insoluble indigo in an alkaline media and in presence of a dithionite salt (Na₂S₂O₄) as a reducing agent. Cyclic voltammograms of leucoindigo show two reversible electrodic processes, in the aqueous 0.1 M Tris‐HCl pH 7.2, at the formal potential of ?0.4 V and +0.3 V (vs. Ag/AgCl/sat. KCl). In a batch protocol, leucoindigo was quantified by CV with a change of medium between accumulation and detection steps. Reversible voltammetric processes of leucoindigo were greatly enhanced by other voltammetric technique like alternating current voltammetry. Limit of detection in the nanomolar range was achieved for a 2 min accumulation time by ACV in a batch procedure. A flow system was also employed, with adsorptive voltammetric detection of leucoindigo, since this automates the methodology and decreases analysis time. Parameters related to the electrochemical technique are optimized and calibration plots obtained are reported. These data provide useful information about the suitability of using leucoindigo in the detection system of alkaline phosphatase (AP) and horseradish peroxidase (HRP) based affinity devices, in which indigo is generated by the enzymatic hydrolysis of the 3‐indoxyl phosphate substrate.     

Electrochemical Behavior of MCF‐7 Cells on Carbon Nanotube Modified Electrode and Application in Evaluating the Effect of 5‐Fluorouracil

The electrochemical behavior of human breast cancer cells (MCF‐7) suspension on multiwalled carbon nanotube (MWCNT) modified graphite electrode was studied by using cyclic voltammetry (CV) and potentiometric stripping analysis (PSA). Compared with bare graphite electrode, the MWCNTs‐modified electrode showed electrocatalytic property to the oxidation of electroactive species in the cell suspension. One oxidative peak at about +0.74 V was observed in the cyclic voltammogram. PSA was proved to be more sensitive than CV for investigation of the electrochemical behavior of cells. And it was found that ultrasonication treatment of the cell suspension can significantly enhance the PSA signal. Factors influencing the PSA signal of cells, including deposition time, deposition potential and stripping current, were investigated in detail and the optimum conditions were obtained. The baseline corrected PSA signal was found to be related to the viability of cells and the technique was used for monitoring the growth of MCF‐7 cells. The effect of anticancer drug 5‐fluorouracil (5‐FU) on the growth of MCF‐7 cells was also investigated by PSA.     

Electrochemical and Optical Behavior of 8‐Hydroxypyrene‐1,3,6‐trisulfonic Acid at Optically Transparent Electrodes

The objective of this work is to elucidate the electrochemical and corresponding optical properties of 8‐hydroxypyrene‐1,3,6‐trisulfonic acid (HPTS), using optically transparent electrodes, thereby deducing its usefulness as a model compound for spectroelectrochemical sensor development. Three pH levels were tested to determine optimal solution conditions for optical signal modulation. The electrolysis of HPTS follows an ECE mechanism, presumably resulting in the formation of a dihydroxy/dione derivative, and modulates the optical response at 405 and 460 nm wavelengths for pH 5 solutions. HPTS is a good candidate for spectroelectrochemical sensor research.     

Electrochemical Oxidative Detection of Guanosine‐5′‐triphosphate Based on a New Ionic Liquid Modified Carbon Paste Electrode

An ionic liquid (IL) 1‐(3‐chloro‐2‐hydroxy‐propyl)‐3‐methylimidazolium trifluoroacetate was used as the modifier for the preparation of the modified carbon paste electrode (CPE). The IL‐CPE showed excellent electrocatalytic activity towards the oxidation of guanosine‐5′‐triphosphate (5′‐GTP) in a pH 5.0 Britton‐Robinson buffer solution. Due to the presence of high conductive IL on the electrode surface, the electrooxidation of 5′‐GTP was greatly promoted with a single well‐defined irreversible oxidation peak appeared. The electrode reaction was an adsorption‐controlled process and the electrochemical parameters of 5′‐GTP on IL‐CPE were calculated with the electron transfer coefficient (α) as 0.44, the electron transfer number (n) as 1.99, the apparent heterogeneous electron transfer rate constant (k_s) as 2.21 × 10^?9 s^?1 and the surface coverage (Γ_T) as 1.53 × 10^?10 mol cm^?2. Under the selected conditions a linear calibration curve between the oxidation peak currents and 5′‐GTP concentration was obtained in the range from 2.0 to 1000.0 μmol L^?1 with the detection limit as 0.049 μmol L^?1 (3σ) by differential pulse voltammetry. The proposed method showed good selectivity to the 5‘‐GTP detection without the interferences of coexisting substances and the practical application was checked by measurements of the artificial samples.     

甲苯胺蓝修饰石墨电极的电化学性质及对血红蛋白的电催化还原

本文将电子媒体甲苯胺蓝吸附在石墨电极上制备成修饰电极。在＋０．２～０．５Ｖ（ｖｓ．ＳＣＥ）范围内，吸附态的甲苯胺蓝呈现有两质子参与的可逆性两电子氧化还原行为，在ｐＨ５．５醋酸盐缓冲溶液中，其表面式量电位Ｅ＾０为－０．２２Ｖ，表观表面电子传递速率常数ｋ为１．１Ｓ＾－１，甲苯胺蓝修饰电极具有良好的稳定性，它能加速血红蛋白在固体电极上的电子传递，产生很好的电流响应。     

Voltammetry of Os(VI)‐Modified Polysaccharides at Carbon Electrodes

We show that polysaccharides (PSs, such as dextran and mannan) can be chemically modified by Os(VI) complexes, yielding electroactive adducts. Os(VI) complexes with different ligands (e.g., temed and 2,2′‐bipyridine) produced at pyrolytic graphite electrodes redox couples at different potentials suitable for “multicolor” labeling of PSs and for studies of ligand exchange kinetics. PS‐Os(VI)L adducts can be determined not only in their purified forms but also in the reaction mixtures.     

UV‐Visible and Electrochemical Monitoring of Carbon Monoxide Release by Donor Complexes to Myoglobin Solutions and to Electrodes Modified with Films Containing Hemin

This study reports on the evaluation of the CO donating behavior of tricarbonyl dichloro ruthenium(II) dimer ([Ru(CO)₃Cl₂]₂) and 1,3‐dimethoxyphenyl tricarbonyl chromium (C₆H₃(MeO)₂Cr(CO)₃) complex by UV‐visible technique and electrochemical technique. The CO release was monitored by following the modifications of the UV‐visible features of MbFe(II) in phosphate buffer solution and the redox features of reduced Hemin, HmFe(II), confined at the surface of a vitreous carbon electrode. In the latter case, the interaction between the hemin‐modified electrode and the released CO was seen through the observation of an increase of the reduction current related to the Fe^III/Fe^II redox process of the immobilized porphyrin. While the ruthenium‐based complex, ([Ru(CO)₃Cl₂]₂), depended on the presence of Fe(II) species to release CO, it was found that the chromium‐based complex released spontaneously CO. This was facilitated by illuminating and/or simple stirring of the solution containing the complex.     

Electrochemical Behavior of o‐Nitrophenol at Hexagonal Mesoporous Silica Modified Carbon Paste Electrodes

A hexagonal mesoporous silica (HMS) modified carbon paste electrode (CPE) was fabricated and characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods (ferrocene as a probe). The electrochemical behavior of nitrophenol (o‐NP) at the HMS modified electrode (HMSCPE) was investigated. Compared with CPE, a well‐defined reduction peak and a remarkably peak current response was observed. It is indicated that mesoporous HMS exhibited remarkable enhancement effects on the electrochemical reduction of o‐NP. The electrochemical reduction mechanism was also discussed. Consequently, a simple and sensitive electrochemical method was proposed for the determination of o‐NP, which was used to determine o‐NP in waste water samples.     

Fabrication and Electrochemical Behavior of Vanadium‐Substituted Keggin‐Type Polyoxometalates Multilayer Films on 4‐Aminobenzoic Acid Modified Glassy Carbon Electrodes

Two Vanadium‐substituted Keggin‐type polyoxometalates, K₃H₂[α‐SiVW₁₁O₄₀]?6H₂O (SiVW₁₁) and K₄H₂[γ(1, 2)‐SiV₂W₁₀O₄₀]?4H₂O (SiV₂W₁₀) were first successfully immobilized on 4‐aminobenzoic acid modified glass carbon electrodes respectively by layer‐by‐layer assembly with poly (ethylenimine) (PEI) as counterions. The regular growth processes were monitored by cyclic voltammetry (CV), and it was proved that the multilayer films were uniform and stable. The cyclic voltammetry results indicated that the electrochemical behavior of two multilayer films was similar, and their redox couples are pH‐ and scan rate‐dependent. The multilayer films show favorable electrocatalytic active toward the reduction of NO₂^?, IO₃^? and H₂O₂.     

Electrochemical Analysis of D‐Penicillamine Using a Carbon Paste Electrode Modified with Ferrocene Carboxylic Acid

The electrochemical behavior of D ‐penicillamine (D ‐PA) studied at the surface of ferrocene carboxylic acid modified carbon paste electrode (FCAMCPE) in aqueous media using cyclic voltammetry and double step potential chronoamperometry. It has been found that under optimum condition (pH 7.00), the oxidation of D ‐PA at surface of such an electrode is occurred about 420 mV less positive than that an unmodified carbon paste electrode (CPE). The catalytic oxidation peak current was linearly dependent on the D ‐PA concentration and a linear calibration curve was obtained in the ranges 7.5×10^?5 M – 1.0×10^?3 M and 6.5×10^?6 M?1.0×10^?4 M of D ‐PA with cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods respectively. The detection limits (3σ) were determined as 6.04×10^?5 M and 6.15×10^?6 M. This method was also used for the determination of D ‐PA in pharmaceutical preparation (capsules) by standard addition method.     

Voltammetric Behaviour of 7‐Methylguanine Using Screen‐printed Graphite Electrodes: towards a Guanine Methylation Electrochemical Sensor

The determination of 7‐methylguanine (7mG) is an interesting analytical target since its quantification can be correlated with the methylation of cytosine which is one of the most relevant epigenetic modification of DNA. In this work, screen‐printed graphite electrodes were used to study the electrochemical characterization of 7mG by cyclic and square wave voltammetry. 7mG concentration and pH were examined, as well as the repeatability of the measurements. The electrochemical response of 7mG in the presence of guanine and adenine was also investigated. Results aim to the future development of an electrochemical sensor for the methylation degree in DNA.