Integrated Microanalytical System for Simultaneous Voltammetric Measurements of Free Metal Ion Concentrations in Natural Waters

A complexing gel integrated microelectrode (CGIME) for direct measurements of free metal ion concentrations in natural waters has been developed. It is prepared by the successive deposition of microlayers of a chelating resin, an antifouling agarose gel and Hg on a 100‐interconnected Ir‐based microelectrode array. The trace metals of interest are in a first step accumulated on the chelating resin in proportion to their free ion concentration in solution, then released in acidic solution and detected simultaneously by using square wave anodic stripping voltammetry (SWASV). The reliability of this sensor for the simultaneous measurement of copper, lead and cadmium has been studied by a series of replicate laboratory tests. The proportionality between the voltammetric peak current intensity and the free metal ion concentrations in solution has been demonstrated by using malonate as a model ligand. Finally, the CGIME sensor was applied to the Cu and Pb free concentration measurement in sea water samples and the results compared to the free metal ion concentrations measured using hollow fiber based permeation liquid membrane (HF‐PLM) coupled to inductively coupled plasma mass spectrophotometer (ICP‐MS). Comparable concentration values were found for both metals with both techniques allowing to validate the CGIME measurements in complex media.     

Microliter Volume Determination of Cosmetic Mercury with a Partially Crosslinked Poly(4‐vinylpyridine) Modified Screen‐Printed Three‐Electrode Portable Assembly

We successfully demonstrated microliter (μL) volume determination of Mercury (Hg) using an in‐built screen‐printed three electrodes containing partially crosslinked poly(4‐vinlylpyridine) (designated as pcPVP) modified carbon‐working, carbon‐counter, and Ag⁺‐quasireference electrodes (SPE/pcPVP) in a pH 4 acetate buffer solution with 2 M KCl by using the square wave anodic stripping voltammetric (SWASV) technique. Instrumental and solution phase conditions were systematically optimized. Experiments were carried out by simply placing a 500 μL‐droplet of Hg containing real sample mixed with the base electrolyte on the SPE/pcPVP surface. The SPE/Ag⁺ quasi‐reference system shifted the Hg‐SWASV detection potential ca. 250 mV positive, but the quantitative current values were appreciably similar to that of a standard Ag/AgCl reference electrode. Under optimal condition, the calibration graph is linear in the window of 100–1000 ppb of the Hg droplet system with a detection limit of 69.5 ppb (S/N=3). Finally real sample assays were demonstrated for prohibited cosmetic Hg containing skin‐lightening agents in parallel with ICP‐OES measurements.     

Bismuth Film Microelectrode Modified with Overoxidized Poly‐1‐Naphtylamine Protective Membrane for Enhanced Stripping Voltammetric Detection

The application of protective overoxidized poly‐1‐naphtylamine membrane (ONAP) is demonstrated in combination with bismuth film microelectrode (ONAP‐BiFME) for anodic stripping voltammetric measurement of trace heavy metals in the presence of some selected surfactants. The ONAP membrane was electrochemically deposited on the surface of bare single carbon fiber microelectrode followed by the in situ or ex situ preparation of the bismuth film. The key operational parameters influencing the stripping performance of the ONAP‐BiFME were optimized and its electroanalytical performance was examined in the model solution containing Cd(II) and Pb(II) as test metal ions. The ONAP‐BiFME exhibited significantly enhanced stripping voltammetric response (approximately 70% for Cd(II) and 45% for Pb(II)) in comparison with unmodified BiFME in the absence of surfactants. In the presence of high concentrations, e.g., 20 mg L^?1, of anionic or cationic surfactants, the stripping signal for, e.g., Cd(II) decreased for less than 6% at the ONAP‐BiFME, whereas at the unmodified BiFME the signal attenuated considerably (approximately 38%). Moreover, in the presence of 10 mg L^?1 of nonionic surfactant Triton X‐100, the stripping signals at the bare BiFME were almost completely suppressed, whereas at the ONAP‐BiFME exhibited linear concentration behavior in the examined concentration range from 10 to 120 μg L^?1, with the calculated limit of detection of 5.0 μg L^?1 and 3.4 μg L^?1 for Cd(II) and Pb(II), respectively in connection with 60 s accumulation time. The attractive behavior of ONAP‐modified BiFME expands the applicability of bismuth‐based electrodes for measurement of trace heavy metals in real environments, where the presence of more complex matrix can be expected.     

Hybrid liquid membrane (HLM) system in separation technologies

A novel liquid membrane system, denoted hybrid liquid membrane (HLM), was developed for the separation of solutes (metal ions, acids, etc.). It utilizes a solution of an extracting reagent (carrier solution), flowing between membranes. The membranes, which separate the carrier solution from feed and receiving (strip) solutions, enable the transport of solutes, but block the transfer of the carrier to the feed or to the strip. Blocking the carrier is achieved through membranes hydrophilic/hydrophobic or ion exchange properties, or through their rentention abilities, due to pore size.     

Simultaneous and Sensitive Detection of Cd(II) and Pb(II) Using a Novel Bismuth Film/Ordered Mesoporous Carbon‐molecular Wire Modified Graphite Carbon Paste Electrode

An electrochemical sensor for the simultaneous and sensitive detection of Cd(II) and Pb(II) is proposed on the basis of square‐wave anodic stripping voltammetry (SWASV) experiments using a novel bismuth film/ordered mesoporous carbon‐molecular wire modified graphite carbon paste electrode (Bi/OMC‐MW/GCPE). Ordered mesoporous carbon (OMC) and molecular wire (MW) (diphenylacetylene) were used as the modifier and binder, respectively. The Bi/OMC‐MW/GCPE was prepared with the addition of graphite powder, OMC and DPA at the ratio of 2 : 1 : 1. The electrochemical properties and morphology of the electrode were characterized by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), SWASV and scanning electron microscopy (SEM). The parameters affecting the stripping current response were investigated and optimized. The experimental results show that the prepared electrode exhibited excellent electrochemical performance, good electrical conductivity and a high stripping voltammetric response. Under optimized conditions, a linear range was achieved over a concentration range from 1.0 to 70.0 μg/L for both Cd(II) and Pb(II) metal ions, with detection limits of 0.07 μg/L for Cd(II) and 0.08 μg/L for Pb(II) (S/N=3) with the deposition time 150 s. Moreover, the sensor exhibited improved sensitivity and reproducibility compared to traditional CPEs. The fabricated electrode was then successfully used to satisfactorily detect Cd(II) and Pb(II) in real soil samples.     

Graphene Oxide‐Modified Electrode Coated with in‐situ Antimony Film for the Simultaneous Determination of Heavy Metals by Sequential Injection‐Anodic Stripping Voltammetry

The proposed chemically modified electrode was graphene oxide that was synthesized via Hummer's method followed by reduction of antimony film by in‐situ electrodeposition. The experimental process could be concluded in three main steps: preparation of antimony film, reduction of analyte ions on the electrode surface and stripping step under the conditions of square wave anodic stripping voltammetry (SWASV). A simple and rapid approach was developed for the determination of heavy metals simultaneously based on a sequential injection (SI), an automated flow‐based system, coupled with voltammetric method using antimony‐graphene oxide modified screen‐printed carbon electrode (SbF‐GO‐SPCE). The effects of main parameters involved with graphene oxide, antimony and measurement parameters were also investigated. Using SI‐SWASV under the optimal conditions, the proposed electrode platform has exhibited linear range from 0.1 to 1.5 M. Calculated limits of detection were 0.054, 0.026, 0.060, and 0.066 μM for Cd(II), Pb(II), Cu(II) and Hg(II), respectively. In addition, the optimized method has been successfully applied to determine heavy metals in real water samples with acceptable accuracy of 94.29 – 113.42 % recovery.     

A study on separation and extraction of four main alkaloids in Macleaya cordata (Willd) R. Br. with strip dispersion hybrid liquid membrane

A technique based on strip dispersion hybrid liquid membrane was developed for the separation and extraction of four main alkaloids from fruits of Macleaya cordata (Willd) R. Br. A microporous polypropylene membrane impregnated with an organic membrane solution comprised the heart of the strip dispersion hybrid liquid membrane system. The membrane solution was made by dissolving a cationic carrier, di‐(2‐ethylhexyl) phosphoric acid in an inexpensive, less toxic membrane solvent, kerosene. The transport of alkaloids from an aqueous feed solution through the membrane to a strip dispersion phase was driven by the concentration gradient of H⁺ and facilitated by di‐(2‐ethylhexyl) phosphoric acid. The effects of the extraction time and reuse times of the membrane, the strip solution composition, the carrier concentration, the volume ratio of the aqueous strip solution to the organic membrane solution, and the flow rates of the feed solution and the strip dispersion phase on the transport of alkaloids were investigated. Under the optimal conditions, the permeability coefficients obtained for the four main alkaloids allocryptopine, protopine, sanguinarine, and chelerythrine were 1.66, 1.99, 2.98, and 3.06×10^?4 cm/s, and the transport efficiencies were as high as 68, 77, 83, and 85%, respectively.     

辣根过氧化酶在纳米金／氧化锌球腔微电极阵列上的直接电化学研究

利用Langmuir - Blodgett技术和溶胶-凝胶(sol -gel)法在氧化铟锡(ITO)电极表面制备了有序的纳米金／氧化锌(nano-Au/ZnO)球腔阵列,并采用扫描电镜表征了nano-Au/ZnO球腔阵列的形貌.该阵列的循环伏安曲线具有微电极特性.将辣根过氧化酶(HRP)直接固定于nano-Au/ZnO...     

Novel Solid‐Contact Ion‐Selective Microelectrodes for Localized Potentiometric Measurements

The design and properties of novel type of solid‐contact ionophore‐based ion‐selective microelectrodes are reported. The microelectrode is based on an insulated needle‐shaped metallic wire with an exposed apex. The ion‐to‐electron transducer is made of poly(3‐octylthiophene‐2,5‐diyl) and placed between an ion‐selective membrane and the metallic tip. The ion‐selective polyvinyl chloride‐based membrane is deposited atop the layer of conductive polymer. The length of the ion‐sensitive part of the electrode is less than 10 μm. pH and Mg²⁺‐selective microelectrodes were constructed and tested showing stable potential and fast response that are essential properties for the practical application of microelectrodes for localized scanning measurements.     

Extraction of molybdenum by a supported liquid membrane method

This is a report on the extraction of molybdenum(VI) ions using a supported liquid membrane, prepared by dissolving in kerosene, the extractant Alamine 336 (a long-chain tertiary amine) employed as mobile carrier. A flat hydrophobic microporous membrane was utilised as solid support. Appropriate conditions for Mo(VI) extraction through the liquid membrane were obtained from the results of liquid-liquid extraction and stripping partition experiments. The influence of feed solution acidity, the carrier extractant concentration in the organic liquid film and the content of strip agent on the metal flux through membrane were investigated. It was established that maximal extraction of metal is achieved at a pH 2.0 if sulphuric acid is used in the feed solution and at a pH value over 11.0 if Na₂CO₃ is used as strip agent. Moreover, the molybdenum extraction through membrane is enhanced when a 0.02 mol l⁻¹ content of the amine carrier in the organic phase is used. The present paper deals with an equilibrium investigation of the extraction of Mo(VI) by Alamine 336 and its permeation conditions through the liquid membrane, and examines a possible mechanism of extraction.     

Stripping voltammetry study of ultra-trace toxic metal ions on highly selectively adsorptive porous magnesium oxide nanoflowers

We have demonstrated highly selective and sensitive detection of Pb(II) and Cd(II) using a highly selective adsorptive porous magnesium oxide (MgO) nanoflowers. The MgO nanoflower-modified glassy carbon electrode was electrochemically characterized using cyclic voltammetry; and the anodic stripping voltammetric performance of bound Pb(II) and Cd(II) was evaluated using square wave anodic stripping voltammetry (SWASV) analysis. The MgO nanoflower-modified electrode exhibited excellent sensing performance toward Pb(II) and Cd(II) that was never observed previously at bismuth (Bi)-based electrodes. Simultaneous additions of Pb(II) and Cd(II) were investigated in the linear range from 3.3 to 22 nM for Pb(II) and 40 to 140 nM for Cd(II), and detection limits of 2.1 pM and 81 pM were obtained, respectively. Some foreign ions, such as Cu(II), Zn(II) and Cr(III) do not interfere with the detection of Pb(II) and Cd(II). To the best of our knowledge, this is the first example of a highly adsorptive metal oxide with hierarchical micro/nanostructure that allows the detection of both Pb(II) and Cd(II) ions.     

Selective transport of silver ion through a supported liquid membrane using hexathia-18-crown-6 as carrier.

A facile supported liquid membrane (SLM) system for the selective and efficient transport of silver ion is introduced. The SLM used is a thin porous polyvinyldifluoride membrane impregnated with hexathia-18-crown-6 (HT18C6) dissolved in nitrophenyloctyl ether. HT18C6 acts as a specific carrier for the uphill transport of Ag+ ion as its picrate ion paired complex through the SLM. In the presence of thiosulfate ion as a suitable stripping agent in the strip solution, transport of silver occurs almost quantitatively after 4 h. The selectivity and efficiency of silver transport from aqueous solutions containing other Mn+ cations such as Mg2+, Ca2+, Co2+, Ni2+, Cu2+, Zn2+, Pb2+, Cd2+, Hg2+, Fe3+ and Cr3+ ions were investigated.     

Microelectrode for potassium ions based on a neutral carrier and comparison of its characteristics with a cation exchanger sensor

A potassium-selective liquid-membrane microelectrode based on valinomycin is described. Tip diameters of about 2 μm as well as high discrimination against Na⁺, H₃O⁺, acetylcholine and some other quaternary ammonium ions, allow the intracellular measurement of potassium ion activity changes. The inherently high membrane resistance of the neutral carrier-based microelectrodes is reduced by adding a lipophilic charge carrier to the valinomycin. Results are compared with those of classical microelectrodes.     

Bismuth Modified Gold Microelectrode for Pb(II) Determination in Wine Using Alkaline Medium

Electrodeposition of bismuth on gold microelectrodes for determination of Pb(II) by square wave anodic stripping voltammetry (SWASV) was accomplished by an in situ procedure in alkaline solution. A linear calibration plot for Pb(II) in the concentration range 40 to 6700 nmol L^?1 (r=0.998) was obtained, the detection limit was found to be 12.5 nmol L^?1 (S/N=3) and the relative standard deviation in solutions containing 1 μmol L^?1 Pb(II) was 4% (n=12). The analytical performance of the proposed sensor was tested by measuring the Pb(II) concentration in a wine sample. The result was in good agreement with the one obtained by GFAAS.     

Voltammetric Application of Polypyrrole-Modified Microelectrode Array for the Characterization of DNA Methylation in Glutathione S-Transferase Pi 1

Direct and efficient label-free voltammetric detection of glutathione S-transferase Pi 1 (GSTP1) hypermethylation is reported using a custom-developed 16-channel microelectrode array chip. The microelectrode array chip is used in a dipstick configuration allowing detection of DNA hybridization in a solution volume of only 0.35?mL. Platinum microelectrode disks (n?=?16) 30?µm in diameter have been modified with a polypyrrole bilayer before any contact with the oligonucleotides. The attachment of 15-mer Probe DNA to the bilayer is random but controlled by the presence of aliphatic tether groups allowing it to form a bidentate complex with the probe DNA. The voltammetric detection procedure of methylated GSTP1-specific target DNA is combined with bisulfite treatment of target DNA. Changes at the interface of the modified microelectrodes in an array configuration are used to record simultaneously cyclic voltammetry on all of the devices. The detection of hybridization is evaluated statistically by a yes or no event by comparing the changes in recorded cyclic voltammograms before and after exposure to the target DNA. All cyclic voltammograms of the methylated target show a greater percentage change than those with the nonmethylated target exposure and show a greater change in cyclic voltammogram area after methylated target exposure. We observe an average percentage difference of 25.6?±?4.9% with a variation of 19.1%. These results demonstrate that the fast sensing strategy possesses sensitivity and good specificity. Furthermore, this technology can potentially support rapid, accurate diagnosis and risk assessment of patients with prostate cancer.     

Voltammetric Determination of L‐Dopa on Poly(3,4‐ethylenedioxythiophene)‐Single‐Walled Carbon Nanotube Composite Modified Microelectrodes

In the present communication, it is shown that platinum microelectrodes electrochemically coated with a composite of poly(3,4‐)ethylenedioxythiophene and single‐walled carbon nanotubes (PEDOT/SWNT) enable determinations of 3,4‐dihydroxy‐L ‐phenylalaines (L ‐dopa) in neutral phosphate buffer solutions containing an excess of ascorbic acid. The interpenetrated networked nanostructure of the composite was characterized by scanning electron microscope (SEM) and Raman spectroscopy. It is shown that the presence of the composite gives rise to an increase in the electroactive area of an order of magnitude in compared to the area for the bare microelectrodes. The composite film‐coated microelectrode, which yielded reversible cyclic voltammograms for the ferro/ferricyanide redox couple for scan rates between 0.01 and 0.10 V s^?1, also gave rise to two well‐resolved oxidation peaks for L ‐dopa and ascorbic acid (AA). The latter effect, which was not seen in the absence of the composite, enabled differential pulse voltammetric determinations of L ‐dopa in the concentration range between 0.1 to 20 μM with a detection limit of 100 nM.     

Investigation into the voltammetric behaviour and detection of selenium(IV) at metal electrodes in diverse electrolyte media

The voltammetric behaviour of selenium(IV) was studied at platinum and gold electrodes in sulphuric acid, perchloric acid and potassium chloride media as a basis for its voltammetric detection. The best voltammetric behaviour was recorded at gold electrodes with perchloric acid as the supporting electrolyte. The concomitant presence of metals, such as copper or lead, and of model biomolecules, such as bovine serum albumin, in the solution resulted in a deterioration of the electrochemical response for selenium(IV). Quantitative detection of selenium(IV) by square wave anodic stripping voltammetry at both a millimetre-sized gold disc electrode and a microband electrode array revealed linear responses to selenium concentration in the ranges 5–15 μM and 0.1–10 μM, respectively, with 60 s preconcentration. The sensitivities were 6.4 μA μM⁻¹ cm⁻² and 100 μA μM⁻¹ cm⁻² at the disc and the microband array, respectively. The detection limit at the microband electrode array was 25 nM, illustrating the potentiality of such microelectrodes for the development of mercury-free analytical methods for the trace detection of selenium(IV).     

Voltammetry of Undiluted Red‐Ox Systems. Electrochemical ESR‐ and Electrochemical Impedance Spectroscopy Evidence for Formation of Ionic Liquid at Microelectrode Surface

It is believed that voltammetry of undiluted red‐ox liquids can lead to the formation of stable thin layers of ionic liquids at the microelectrode surface. Such situation was postulated for several liquids (solvents), however, so far no hard evidence supporting this expectation was obtained. By using electron spin resonance in combination with voltammetric experiments and electrochemical impedance spectroscopy we have shown that the concentration of the cation radicals at the microelectrode surface may be high (nitrobenzene) and the overall resistance of the solution abruptly drops (methanol) when the potential at the microelectrode corresponds to the wave plateau of the undiluted organic liquid. Both facts constitute a good evidence for the formation of microlayers of ionic liquids at the microelectrode surface during electrolysis of undiluted red‐ox systems.     

Study of Bare and Mercury‐Coated Vibrated Carbon,Gold and Silver Microwire Electrodes for the Determination of Lead and Cadmium in Seawater by Anodic Stripping Voltammetry

Carbon, gold and silver microwires are revisited under vibrated conditions for detection of trace lead and cadmium in seawater. The Pb and Cd peaks fully overlapped on the bare gold and carbon electrodes and partially on the silver electrode. The sensitivity of all three was insufficient for detection in uncontaminated waters. Peak separation was obtained after coating with mercury (Hg). Only the Hg‐coated silver electrode is suitable when preplated. Limits of detection for Pb using the Hg/C and Hg/Ag electrodes (20–40 pM), and Cd (70 pM), are sufficiently low for Pb and Cd detection in seawater.     

Differential Pulse Techniques on Modified Conventional‐Size and Microelectrodes. Electroactivity of Poly[4,4′‐bis(butylsulfanyl)‐2,2′‐bithiophene] Coating Towards Dopamine and Ascorbic Acid Oxidation

Poly[4,4′‐bis(butylsulfanyl)‐2,2′‐bithiophene] modified conventional‐size and (ultra)microelectrodes are first investigated in acetonitrile and quasi‐neutral aqueous solution with respect to the repeatability of the responses obtained both in cyclic voltammetry and in differential pulse voltammetry. The reactivity towards ferrocene and hydroquinone, chosen as benchmark oxidizable substances in the two media, respectively, is considered. Comparison is made with the behavior of poly(3‐methylthiophene) as electrode coating, which is one of the most commonly used redox mediators in amperometric sensors based on coatings consisting of conducting polymers. The results confirm the appealing properties of poly[4,4′‐bis(butylsulfanyl)‐2,2′‐bithiophene], previously evidenced by us in different electrochemical studies: it exhibits particularly high stability and the characteristics of the current/potential curves obtained make it particularly suitable for analytical purposes. After performing these tests, the quantitative determination of dopamine by modified microelectrode is examined and the simultaneous voltammetric determination of ascorbic acid and dopamine is considered. The possibility of working profitably with a microelectrode at very low buffer‐supporting electrolyte concentration is ascertained.