Guderley reflection for higher Mach numbers in a standard shock tube

An experimental study shows that the Guderley reflection (GR) of shock waves can be produced in a standard shock tube. A new technique was utilised which comprises triple point of a developed weak Mach reflection undergoing a number of reflections off the ceiling and floor of the shock tube before arriving at the test section. Both simple perturbation sources and diverging ramps were used to generate a transverse wave in the tube which then becomes the weak reflected wave of the reflection pattern. Tests were conducted for three ramp angles (10°, 15°, and 20°) and two perturbation sources for a range of Mach numbers (1.10–1.40) and two shock tube expansion chamber lengths (2.0 and 4.0 m). It was found that the length of the Mach stem of the reflection pattern is the overall vertical distance traveled by the triple point. Images with equivalent Mach stem lengths in the order of 2.0 m were produced. All tests showed evidence of the fourth wave of the GR, namely the expansion wave behind the reflected shock wave. A shocklet terminating the expansion wave was also identified in a few cases mainly for incident wave Mach numbers of approximately 1.20.     

Shock wave propagation into a surface depression

An aircraft travelling at supersonic speeds close to the ground generates a bow wave which is reflected off the ground surface. If a valley is traversed a complex reflection pattern will be generated. Similar patterns will evolve with a plane wave traversing a depression on a surface or structure. To simulate the process a planar shock wave, generated in a shock tube, is moved over several notched wedge configurations. Schlieren photographs were produced to assist in identifying the resulting complex three-dimensional wave structures and then verified and extended by three- dimensional computations. The valley geometries investigated are rectangular, triangular, parabolic and conical with a number of valley floor inclinations. The main features are extracted in surface models to demonstrate the complexity of the flow, and in particular in the case where the reflection is regular on the ground plane and Mach reflection in the valley.      

Stability and analogy of shock wave reflection in steady flow

Numerical simulations have been performed to investigate the stability of shock wave reflection in supersonic steady flow. Wall deflection control has been applied just downstream of the reflection point in the regular reflection configuration. The results provide the magnitude of the disturbance required to cause transition from one configuration to the other throughout the range of incident shock angle. An argument focusing on the subsonic region generated behind the Mach stem in the Mach reflection configuration explains the mechanism of the transition. Numerical results show that both regular and Mach reflections are possible in the dual-solution domain, and also indicate the presence of the hysteresis effect. The transition processes and the stability of the possible states are shown to be described consistently by an analogy based on the potential energy of a particle on a surface. The necessity of more sophisticated experimental investigations is emphasized to verify the argument about the stability of shock reflections and proposed analogy. Received 17 March 1997 / Accepted 26 February 1998     

Effects of a Single-pulse Energy Deposition on Steady Shock Wave Reflection

The effects of energy deposition in the free stream on steady regular and Mach shock wave reflections are studied numerically. A short-duration laser pulse is focused upstream of the incident shock waves. It causes formation of the expanding blast wave and the residual hot-spot interacting in a complex way with the steady shock wave reflection. It was found that the laser energy addition in the free stream may force the transition from regular to Mach reflection in the dual solution domain. In contrast to previously reported numerical results, the transition from Mach to regular reflection has not been reproduced in our refined computations since the Mach reflection is restored after the flow perturbation.     

Least energy as a criterion for transition between regular and Mach reflection

A new criterion is suggested to define the point of transition between regular and Mach reflection. The suggested criterion is based on the natural tendency of a physical system to minimize its energy. The increases of the specific energy behind the reflected shock of a regular reflection and behind the Mach stem of a Mach reflection are calculated. It is hypothesized that the type of reflection that will occur is that which produces the smaller change of specific energy. The transition angles predicted using this criterion show better agreement with experimental results than those predicted using the detachment criterion for incident shock waves with Mach numbers between 1.1 and 2.0.This article was processed using Springer-Verlag TEX Shock Waves macro package     

The reflected pressure field in the interaction of weak shock waves with a compressible foam

This paper deals with the waves that are reflected from slabs of porous compressible foam attached to a rigid wall when impacted by a weak shock wave. The interest is in establishing possible attenuation of the pressure field after a shock or blast wave has struck the surface. Foam densities from 14 to 38 kg/m³ were tested over a range of shock wave Mach numbers less than 1.4. It is shown that the initial reflected shock wave strength is accurately predicted by the pseudo-gas model of Gelfand et al. (1983), with a pressure ratio of approximately 80% of the value for reflection off a rigid wall. Evidence is presented of gas entering the foam during the early stages of the process. A second wave emerges from the foam at a later stage and is separated from the first by a region of constant velocity and pressure. This second wave is not a shock wave but a compression front of significant thickness, which emerges from the foam earlier than predicted by the pseudo-gas model. Analysis of the origin of this wave points to much more complex flows within the foam than previously assumed, particularly in an apparent decrease in average wave front speed as the foam is compressed. It is shown that the pressure ratio across both these waves taken together is slightly higher than that for reflection off a rigid wall. In some cases this compression wave train is followed by a weak expansion wave.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1990.     

Three-dimensional propagation of the transmitted shock wave in a square cross-sectional chamber

An investigation into the three-dimensional propagation of the transmitted shock wave in a square cross-section chamber was described in this paper, and the work was carried out numerically by solving the Euler equations with a dispersion-controlled scheme. Computational images were constructed from the density distribution of the transmitted shock wave discharging from the open end of the square shock tube and compared directly with holographic interferograms available for CFD validation. Two cases of the transmitted shock wave propagating at different Mach numbers in the same geometry were simulated. A special shock reflection system near the corner of the square cross-section chamber was observed, consisting of four shock waves: the transmitted shock wave, two reflection shock waves and a Mach stem. A contact surface may appear in the four-shock system when the transmitted shock wave becomes stronger. Both the secondary shock wave and the primary vortex loop are three-dimensional in the present case due to the non-uniform flow expansion behind the transmitted shock.PACS: 43.40.Nm     

Normal shock interaction with a yawed wedge moving at supersonic speed

In this article, the interaction of a normal shock with a yawed wedge moving at supersonic speed has been considered. The vorticity distribution of a particle over the diffracted shock wave for various combinations of yawed angles, Mach number of the shock wave and Mach number of the moving wedge have been obtained. Further triple point angle χ in Mach reflection has been calculated for the various parameters.      

气相爆轰波正反射激波加速研究

实验采用压力传感器测量了指定点压力时间曲线。数值模拟基于二维反应欧拉方程和基元反应模型,采用二阶附加半隐的龙格-库塔法和5阶WENO格式分别离散时间和空间导数项,获得了指定点数值压力时间曲线。理论分析基于爆轰理论和激波动力学,分析了气相爆轰波反射过程所涉及的复杂波系演变并获得了反射激波速度。结果表明:本文数值模拟和理论计算定性上重复并解释了实验现象。气相爆轰波在右壁面反射后,右行稀疏波加速反射激波。其加速原因是:尽管激波波前声速减小,但激波马赫数增大,波前气流速度减小。在低初压下,可能还由于爆轰波后未反应或部分反应气体的作用,导致反射激波加速幅度比高初压下大。     

Numerical investigations of transition between regular and Mach reflections caused by free-stream disturbances

Numerical simulations have been performed to study the influence of the free-stream disturbances on the alternation of the steady shock wave reflection configurations in the dual solution domain. Different types of disturbances have been considered. The analysis of interaction between disturbances and the incident shock wave can be substantially simplified for the localized density disturbances. It is shown that such disturbances can indeed cause the transition from regular reflection to Mach reflection and back, so that within a certain range of angles of incidence the shock wave reflection configuration can be considered as a bi-stable system. The threshold amplitude of the localized density disturbance, able to induce the transition, has been estimated theoretically. The results of numerical computations convince of higher stability of the Mach reflection in the dual solution domain compared to the regular reflection, which is in accordance with available experimental data. Received 10 May 2001 / Accepted 15 November 2001 Published online 8 July 2002     

Shock-tube experiments on the stability of regular reflection in the dual-solution domain

Regular reflection (RR) and Mach reflection (MR) are theoretically both possible in the dual-solution domain of oblique shock reflection. The physical difference between the two types of reflection is the pressure behind the reflected shock wave: that of MR is lower than that of RR for strong shock reflection. The magnitude relation of these pressures is inverted for weak shock reflection. In the present paper, we performed two kinds of experiment, depending on whether the oblique shock reflection is weak or strong. For strong shock reflection, we decreased the pressure behind the reflected wave of RR using a convex double-wedge. For weak shock reflection, we increased this pressure using a concave double-wedge. Thus, we investigated the stability of RR against pressure disturbances. The results indicate that RR in a shock tube is stable, in the dual-solution domain, for both weak and strong incident shocks.     

爆炸冲击波反射流场的理论计算方法

爆炸冲击波遇到固壁,依次发生正规和非正规反射。本文中基于镜像方法,将爆炸冲击波在固壁反射等效为真实和虚拟爆炸流场的相互作用,建立了波后流场的理论计算方法。首先,假定反射波是以虚拟爆源为中心的圆弧,马赫杆是以爆心在固壁投影点为中心的圆弧。然后,根据爆炸自由场传播规律,利用基于几何近似的方法,建立流场中冲击波结构随时间演化的计算方法,确定任意时刻波后流场区域。最后,利用新发展的叠加模型LAMBR (LAMB revisied),将真实和虚拟爆炸流场进行叠加,给出波后流场中的压力、密度和速度等物理量。通过与数值模拟结果和已有数据进行对比,发现该方法得到的流场物理量分布、峰值等能够反映流场发展的主要规律,从而验证了该理论方法的合理性。而且,该理论方法所需的时间相较于数值模拟大大缩短。     

Numerical simulation of the head-on reflection of a regular reflection

The head-on collision and subsequent reflection of a Regular Reflection (RR) from the end-wall of a shock tube has been investigated both experimentally and numerically for two different incident shock wave Mach numbers and two different reflecting wedge angles. The agreement between the double-exposure holographic interferograms and the numerical simulations which were obtained using a GRP based numerical code, was found to be excellent in the RR region and very good behind the head-on reflected RR. The overall good agreement between the computed and experimental constant-density contours (isopycnics) constitutes a validation of the computational method, including the oblique-wall boundary condition.     

The reflection of a shock wave over a cone

An investigation was made of the reflection of planar shock waves from cones. 86 cones, the half apex angle of which varied from 10° to 52° at every 0.5°, were installed in a 60 mm×150 mm diaphragmless shock tube equipped with holographic interferometry. The diaphragmless shock tube had a high degree of reproducibility with which the scatter of shock wave Mach number was within ±0.25% for shock wave Mach number ranging from 1.16 to approximately 2.0. The reflection of shock waves over cones was visualized using double exposure holographic interferometry. Whitham's geometrical shock wave dynamics was used to analyse the motion of Mach stems over cones. It is found that for relatively smaller apex angles of cones trajectory angles of resulting irregular reflections coincide with the so-called glancing incidence angles and their Mach stems appear to be continuously curved from its intersection point with the incident shock wave, which shows the chractericstic of von Neumann reflection. The domain of the existence of the von Neumann reflection was analytically obtained and was found to be broadened much more widely than that of two-dimensional reflections of shock waves over wedges.     

A weak shock wave reflection over wedges

When a weak shock wave reflects from wedges its reflection pattern does not appear to be a simple Mach reflection. This reflection pattern is known to be von Neumann Mach reflection in which a Mach stem can not necessarily be straight. In this paper the local change of the Mach stem curvature was experimentally and numerically investigated. A distinct triple point, at which the curvature becomes infinite as appears in a simple Mach reflection, was not observed but the Mach stem curvature became a maximum between foot of the Mach stem and a point, P₁, at which an incident shock met with a reflected shock. Maximum curvature point P₂ and P₁ do not coincide for small wedge angles and tend to merge over a certain wedge angle. Experimental results agreed with numerical results. The trajectory angle of P₂ was found to be expressed well by Whitham's shock-shock angle.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

Effect of boundary layer on Mach reflection over a wedge surface

Abstract. In this paper, we consider the phenomenon of unsteady Mach reflection generated by a plane shock wave advancing over a straight wedge surface, with particular attention to the deviation of the flow field from the self-similar nature. We examine the observed change in angle between incident and reflected shocks, which is in contrast to the fact that the angle should remain constant with time in a self-similar flow. The effect of the boundary layer behind the advancing shock wave over the surface of the wedge is considered to cause this, and boundary layer theory is utilized to estimate the thickness of the layer. It is found that the thickness increases as to the time t compared with t by the overall expansion in the self-similar flow. Assuming that the thicker boundary layer is effectively equivalent to a change in wedge angle, the effect of the boundary layer on the flow field should be less in later stages with larger t values in accordance with the observation above. Received 6 March 2000 / Accepted 23 April 2001     

The formation of a secondary shock wave behind a shock wave diffracting at a convex corner

This paper deals with the formation of a secondary shock wave behind the shock wave diffracting at a two-dimensional convex corner for incident shock Mach numbers ranging from 1.03 to 1.74 in air. Experiments were carried out using a 60 mm 150 mm shock tube equipped with holographic interferometry. The threshold incident shock wave Mach number () at which a secondary shock wave appeared was found to be = 1.32 at an 81° corner and = 1.33 at a 120° corner. These secondary shock waves are formed due to the existence of a locally supersonic flow behind the diffracting shock wave. Behind the diffracting shock wave, the subsonic flow is accelerated and eventually becomes locally supersonic. A simple unsteady flow analysis revealed that for gases with specific heats ratio the threshold shock wave Mach number was = 1.346. When the value of is less than this, the vortex is formed at the corner without any discontinuous waves accompanying above the slip line. The viscosity was found to be less effective on the threshold of the secondary shock wave, although it attenuated the pressure jump at the secondary shock wave. This is well understood by the consideration of the effect of the wall friction in one-dimensional duct flows. In order to interpret the experimental results a numerical simulation using a shock adaptive unstructured grid Eulerian solver was also carried out. Received 1 May 1996 / Accepted 12 September 1996     

Reflection of a plane shock wave from a rigid concave wall

We present the results of an experimental study of the reflection of a plane stationary shock wave with Mach number in the range 1.21–1.35 from a rigid cylindrical concave wall. The experiments were carried out in a shock tube. In experimental shock tube technology the reflection of a shock wave from a rigid wall is often used for obtaining high temperatures [1]. This circumstance is associated with the fact that the temperature behind the reflected wave is significantly higher than that behind the incident wave.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 33–39, July–August, 1970.     

Transition between regular and Mach reflection of shock waves: new numerical and experimental results

New numerical and experimental results on the transition between regular and Mach reflections of steady shock waves are presented. The influence of flow three-dimensionality on transition between steady regular and Mach reflection has been studied in detail both numerically and experimentally. Characteristic features of 3D shock wave configuration, such as peripheral Mach reflection, non-monotonous Mach stem variation in transverse direction, the existence of combined Mach-regular-peripheral Mach shock wave configuration, have been found in the numerical simulations. The application of laser sheet imaging technique in streamwise direction allowed us to confirm all the details of shock wave configuration in the experiments. Close agreement of the numerical and experimental data on Mach stem heights is shown. Received 23 November 2000 / Accepted 25 April 2001     

A revised three-shock solution for the Mach reflection of weak shocks (1.1<M i<1.5)

It is well known that the classical three-shock theory of von Neumann (1943) does not adequately describe the configuration of the shocks close to the triple-point of a Mach reflection of an incident shock with a Mach number less than about 1.5. The assumptions on which the three-shock theory is based have been examined and several of them are shown to be invalid. The assumption that may be of most significance is that the normal components of the flows behind the reflected and the Mach stem shocks are parallel. Dropping this assumption removes an essential equation in the three-shock solution. An alternative assumption, based on experimental observation, is that there is an approximate linear relationship between the pressure behind the reflected shock and the triple-point trajectory angle. This assumption permits a revised three-shock solution which gives results that are in agreement with experimental observations of reflections of incident shocks with Mach numbers between 1.1 and 1.5.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.