Cesium chromate,Cs2CrO4: heat capacity and thermodynamic properties from 5 to 350 K

The heat capacity of a sample of Cs₂CrO₄ was determined in the temperature range 5 to 350 K by aneroid adiabatic calorimetry. The heat capacity at constant pressure C_p^o(298.15 K), the entropy S^o(298.15 K), the enthalpy {H^o(298.15 K) - H^o(0)} and the function $\text{? {G}{}^{\mathrm{o}}\text{(298.15}\text{K}\text{) - H}{}^{\mathrm{o}}\text{(0)}}\text{298.15}\text{K}$ were found to be (146.06 ± 0.15) J K^?1 mol^?1, (228.59 ± 0.23) J K^?1 mol^?1, (30161 ± 30) J mol^?1, and (127.43 ± 0.13) J K^?1 mol^?1, respectively. The heat capacity C_p^o(298.15 K) and entropy S^o(298.15 K) and entropy S^o(298.15 K) of Rb₂CrO₄ are estimated to be (146.0 ± 1.0) J K^?1 mol^?1 and (217.6 ± 3.0) J K^?1 mol^?1, respectively.     

Analysis of a symmetric neopolyol ester

Quantitative thermal analysis was carried out for tetra[methyleneoxycarbonyl(2,4,4-trimethyl)pentyl]methane. The ester has a glass transition temperature of 219 K and a melting temperature of 304 K. The heat of fusion is 51.3 kJ mol^?1, and the increase in heat capacity at the glass transition is 250 J K^?1 mol^?1. The measured and calculated heat capacities of the solid and liquid states from 130 to 420 K are reported and a discussion of the glass and melting transitions is presented. The computation of the heat capacity made use of the Advanced Thermal Analysis System, ATHAS, using an approximate group-vibration spectrum and a Tarasov treatment of the skeletal vibrations. The experimental and calculated heat capacities of the solid ester were compared over the whole temperature range to detect changes in order and the presence of large-amplitude motion. An addition scheme for heat capacities of this and related esters was developed and used for the extrapolation of the heat capacity of the liquid state for this ester. The liquid heat capacity for the title ester is well represented by 691.1+1.668T [J K^?1 mol^?1]. A deficit in the entropy and enthalpy of fusion was observed relative to values estimated from empirical addition schemes, but no gradual disordering was noted outside the transition region. The final interpretation of this deficit of conformational entropy needs structure and mobility analysis by solid state¹³C NMR and X-ray diffraction. These analyses are reported in part II of this investigation.     

腈菌唑的热容和热力学性质

通过小样品精密自动绝热热量计测定了自己合成并提纯的腈菌唑 (C₁₅H₁₇ClN₄) 在78 ～ 368K温区的低温摩尔热容。量热实验发现, 该化合物在363 ~ 372 K温区, 有一固-液熔化相变过程, 其熔化温度为 (348.800±0.06)K, 摩尔熔化焓、摩尔熔化熵及化合物的纯度分别为：(30931±11) J•mol^-1、(88.47±0.02) J•mol^-1•K^-1和0.9941(摩尔分数)。用差示扫描量热(DSC) 技术对该物质的固-液熔化过程作了进一步研究，结果与绝热量热法一致。     

Lithium tetrahydridoaluminate LiAlH4 and hexahydridoaluminate Li3AlH6: molar heat capacity and thermodynamic properties from 10 to 300 K

The heat capacity of lithium tetra- and hexa-hydridoaluminate have been determined by adiabatic calorimetry over the range 10 to 300 K and associated thermodynamic functions have been computed. At 298.15 K the heat capacities C_p and entropies S^o are respectively 83.19 J K^?1 mol^?1 and 78.8 J K^?1 mol^?1 for LiAlH₄ and 127.75 J K^?1 mol^?1 and 102.6 J K^?1 mol^?1 for Li₃AlH₆.     

Heat capacity and dual spin-transitions in the crossover system [Fe(2-pic)3]Cl2·EtOH

The heat capacity of [Fe(2-pic)₃]Cl₂·C₂H₅OH Crystal (2-pic: 2-picolylamine) has been measured with an adiabatic calorimeter between 13 and 315 K. Two phase transitions centered at 114.04 and 122.21 K were observed. This finding accords with recent prediction of possible existence of two-step spin-conversion (H. Köppen et al., Chem. Phys. Lett., 91 (1982) 348). The total transition enthalpy and entropy amounted to ΔH = 6.14 kJ mol^?1 and ΔS = 50.59 J K^?1 mol^?1. The transition entropy consists of the magnetic contribution (13.38 J K^?1 mol^?1), the orientational order-disorder phenomenon of the solvate ethanol molecule (8.97) and the change in the phonon system, in particular the change in stretching and deformation vibrations of the metal-ligand (28.24).     

Low-temperature heat capacity of L- and DL-phenylglycines

Heat capacity of crystalline L- and DL-phenylglycines was measured in the temperature range from 6 to 305?K. For L-phenylglycine, no anomalies in the C _p (T) dependence were observed. For DL-phenylglycine, however, an anomaly in the temperature range 50?C75?K with a maximum at about 60?K was registered. The enthalpy and the entropy changes corresponding to this anomaly were estimated as 20?J?mol^?1 and 0.33?J?K^?1 mol^?1, respectively. In the temperature range 205?C225?K, an unusually large dispersion of the experimental points and a small change in the slope of the C _p (T) curve were noticed. Thermodynamic functions for L- and DL-phenylglycines in the temperature range 0?C305?K were calculated. At 298.15?K, the values of heat capacity, entropy, and enthalpy are equal to 179.1, 195.3?J?K^?1 mol^?1, and 28590?J?mol^?1 for L-phenylglycine and 177.7, 196.3?J?K^?1 mol^?1 and 28570?J?mol^?1 for DL-phenylglycine. For both L- and DL-phenylglycine, the C _p (T) at very low temperatures does not follow the Debye law C ?C T ³ . The heat capacity C _p (T) is slightly higher for L-phenylglycine, than for the racemic DL-crystal, with the exception of the phase transition region. The difference is smaller than was observed previously for the L-/DL-cysteines, and considerably smaller, than that for L-/DL- serines.     

Low-temperature thermodynamic properties of L- and DL-valines

Heat capacities C _p(T) of L-valine and DL-valine were measured in the temperature range 6–300 K with an adiabatic calorimeter; thermodynamic functions were calculated based on these measurements. At 298.15 K, the values of heat capacity, C _p; entropy, S _m ⁰ (T) ? S _m ⁰ (0); enthalpy, H _m ⁰ (T) ? H _m ⁰ (0) of L-valine are equal, respectively, to 167.9 ± 0.3 J K^?1 mol^?1; 178.5 ± 0.4 J K^?1 mol^?1; and 27510 ± 60 J mol^?1. For DL-valine, these values are equal, respectively, to 167.3 ± 0.3 J K^?1 mol^?1, 174.4 ± 0.3 J K^?1 mol^?1, and 27000 ± 50 J mol^?1. The difference between the heat capacities of enantiomer and racemate has been calculated and compared with the similar data for serines, cysteines, and phenylglycines.     

Chemical equilibria 6. Measurement of equilibrium constants for the dehydrogenation of 2-methylpropan-1-ol by a vapour-flow technique

Equilibrium constants for 2-methylpropan-1-ol + 2-methylpropanal + hydrogen have been calculated from measurements of the composition of mixtures formed by passing the vapour over a catalyst at several temperatures in the range 473 to 563 K. Equations relating the changes in enthalpy and entropy of the dehydrogenation reaction to temperature were derived from the equilibrium constants with the aid of heat capacities. By coupling these changes with other thermodynamic data, the standard enthalpy of formation and the standard entropy of 2-methylpropanal at 298.15 K were calculated to be ?(215.7 ± 1.3) kJ mol^?1 and (331.2 ± 1.7) J K^?1 mol^?1 respectively, in the gas state, and ?(247.3 ± 1.8) kJ mol^?1 and (238.3 ± 4.4) J K^?1 mol^?1 respectively, in the liquid state.     

液晶HpBAB的相变和熔化熵的同系规律性的热力学研究

在260～380 K范围内, 用DSC法研究液晶HpBAB的相变。实验查明HpBAB在室温还以玻璃性晶体状态存在。它的玻璃转变、熔化和清亮过程的热力学参数准确地被测到。提出对-正烷氧基亚苄基-对-氨基苯腈同系列中熔化熵和烷基碳原子数的线性关系; 改进Aranow统计模型并估算直线斜率为Rln(3/g)(1相似文献   

Low-temperature heat capacity and standard thermodynamic functions of 1-butyl-3-methylimidazolium lactate

The heat capacities of 1-butyl-3-methylimidazolium lactate ionic liquids ([C₄mim][Lact]) were measured with a highly accurate automatic adiabatic calorimeter over the temperature range from 79 to 406 K. And the experimental values of molar heat capacities were fitted to a polynomial equation using least square method in the appropriate temperature ranges. The standard molar heat capacity was determined to be 1734.46?±?5.12 J K^?1 mol^?1 at 298.15 K. The molar enthalpy and molar entropy of the transition were determined to be 15.575?±?0.045 and 64.44?±?0.14 J K^?1 mol^?1. Other thermodynamic properties, such as (H_T???H_298.15) and (S_T???S_298.15), were also calculated. Furthermore, when the temperature reaches 241.87 K, the strongest peaks appeared by analysis of the heat capacity curve. This phenomenon could be explained from the interionic interaction, which is the hydrogen bond between the anions and cations.     

Low-temperature heat capacity and standard enthalpy of formation of neodymium glycine perchlorate complex [Nd2(Gly)6(H2O)4](ClO4)6·5H2O

Rare-earth perchlorate complex coordinated with glycine [Nd₂(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O was synthesized and its structure was characterized by using thermogravimetric analysis (TG), differential thermal analysis (DTA), chemical analysis and elementary analysis. Its purity was 99.90%. Heat capacity measurement was carried out with a high-precision fully-automatic adiabatic calorimeter over the temperature range from 78 to 369 K. A solid-solid phase transformation peak was observed at 256.97 K, with the enthalpy and entropy of the phase transformation process are 4.438 kJ mol⁻¹ and 17.270 J K⁻¹ mol⁻¹, respectively. There is a big dehydrated peak appears at 330 K, its decomposition temperature, decomposition enthalpy and entropy are 320.606 K, 41.364 kJ mol⁻¹ and 129.018 J K⁻¹ mol⁻¹, respectively. The polynomial equations of heat capacity of this compound in different temperature ranges have been fitted. The standard enthalpy of formation was determined to be −8023.002 kJ mol⁻¹ with isoperibol reaction calorimeter at 298.15 K.     

A calorimetric contribution to the study of polymorphism in tetramethylammonium chloride

The heat capacity of tetramethylammonium chloride has been measured from 115 to 498 K, both for the thermodynamically stable modifications and for the form II, which is metastable below 407 K. The entropy gains at the IV → III λ-transition and at the III → II first-order transition are estimated to be 1.19 J K⁻¹ mol⁻¹ and 4.16 J K⁻¹ mol⁻¹, respectively. At 125 K, the entropy of the metastable phase II exceeds that of the stable modification IV by only 1.76 J K⁻¹ mol⁻¹. If, as has been suggested, each cation in phase II has two possible orientations, it would seem that at 125 K this disorder in phase II is largely, if not wholly, suppressed, without the appearance of any transition or thermal anomaly.Results are also recorded of test measurements of the heat capacity of the NBS sample of synthetic sapphire (α-Al₂O₃) from 138 to 515 K.     

Heat capacity measurements of SnSe and SnSe2

The heat capacities of SnSe and SnSe₂ were measured in the temperature range 230–580 K using a computer interfaced differential scanning calorimeter. From these measurements, the Debye temperatures of SnSe and SnSe₂ were calculated as a function of temperature. An estimated Debye temperature of 220 K for SnSe was used to calculate the absolute entropy of SnSe at 298 K to be 85.2 ± 6.0 J K^?1 mole^?1. In the light of other work, the suitability of Debye temperatures for estimating low temperature heat capacities of SnSe₂ is questioned.     

水合烟酸铜Cu(Nic)2•H2O(s)(Nic＝烟酸)的合成、表征及热力学性质

近几十年来,烟酸盐类化合物或配合物由于优越的吸收率高和无毒副作用等特点使其在化妆品、药品和食品等领域作为营养添加剂具有重要应用前景。然而,这类化合物的基础热力学数据极其缺乏,从而限制了这类化合物的理论研究和应用开发的深入开展。为此,本论文利用室温固相合成方法和球磨技术合成了一种新化合物Cu(Nic)2•H2O(s),利用化学分析、元素分析、FTIR和X-射线粉末衍射技术表征了它的结构和组成,利用精密自动绝热热量计准确地测量了它在78-400 K温区的摩尔热容。在热容曲线的T ＝ 326-346 K温区观察到一个明显的固-液相变过程。利用相变温区三次重复实验热容的测量结果确定了此相变过程的峰温、相变焓和相变熵分别为：Tfus＝(341.290 ±0.873) K, DfusHm＝(13.582±0.012) kJ×mol-1, DfusSm＝(39.797±0.067) J×K-1×mol-1。通过最小二乘法将相变前和相变后的热容实验值分别拟合成了热容对温度的两个多项式方程。通过热容多项式方程的数值积分,得到了这个化合物的舒平热容值和相对于298.15 K的各种热力学函数值,并且将每隔5 K的热力学函数值列成了表格。     

Calorimetric study on phase transition of lanthanum perchlorate octahydrate

Heat capacities of lanthanum perchlorate octahydrate La(ClO₄)₃8H₂O have been measured from 11 to 320 K by an adiabatic calorimeter. Two phase transitions were observed at 115.5 K and 285.2 K, respectively. The enthalpy and entropy of the upper phase transition amounted to 17.97 kJ mol^?1 and 62.98 JK^?1mol^?1. Anomalously large entropy change can be interpreted by a statistical model including a combined positional and orientational disorder of the hydrate water molecules, in accord with an unusually high crystal symmetry of the room temperature phase.     

Low-temperature heat capacities, and thermodynamic properties of solid–solid phase change material bis(1-octylammonium) tetrachlorocuprate

A new crystalline complex (C₈H₁₇NH₃)₂CuCl₄(s) (abbreviated as C₈Cu(s)) was synthesized by liquid phase reaction. Chemical analysis, elemental analysis, and X-ray crystallography were applied to characterize the composition and crystal structure of the complex. Low-temperature heat capacities of the complex were measured by a precision automatic adiabatic calorimeter over the temperatures ranging from 78 to 395 K, and two solid–solid phase changes appeared in the heat capacity curve. The temperatures, molar enthalpies and entropies of the two phase transitions of the complex were determined to be: T _{trs, 1} = 309.4 ± 0.35 K, Δ_trs H _{m, 1} = 16.55 ± 0.41 kJ mol^?1, and Δ_trs S _{m, 1} = 53.49 ± 1.3 J K^?1 mol^?1 for the first peak; T _{trs, 2} = 338.5 ± 0.63 K, Δ_trs H _{m, 2} = 6.500 ± 0.10 kJ mol^?1, and Δ_trs S _{m, 2} = 19.20 ± 0.28 J K^?1 mol^?1 for the second peak. Two polynomial equations of the heat capacities as a function of the temperature were fitted by least-square method. Smoothed heat capacities and thermodynamic functions of the complex relative to the standard reference temperature of 298.15 K were calculated based on the fitted polynomial equations.     

Low-Temperature Heat Capacities and Thermodynamic Properties of Hydrated Nickel L-Threonate Ni（C4H7O5）2·2H2O（S）

Low-temperature heat capacities of the compound Ni（C4H7O5）2·2H2O（S） have been measured with an auto- mated adiabatic calorimeter. A thermal decomposition or dehydration occurred in 350--369 K. The temperature, the enthalpy and entropy of the dehydration were determined to be （368.141 ±0.095） K, （18.809±0.088） kJ·mol ^-1 and （51.093±0.239） J·K^-1·mol^-1 respertively. The experimental values of the molar heat capacities in the temperature regions of 78-350 and 368-390 K were fitted to two polynomial equations of heat capacities （Cp,m） with the reduced temperatures （X）, [X=f（T）], by a least squares method, respectively. The smoothed molar heat capacities and thermodynamic functions of the compound were calculated on the basis of the fitted polynomials. The smoothed values of the molar heat capacities and fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were tabulated with an interval of 5 K.     

Thermophysics of alkali and related azides II. Heat capacities of potassium,rubidium, cesium,and thallium azides from 5 to 350 K

The heat capacities of potassium, rubidium, cesium, and thallium azides were determined from 5 to 350 K by adiabatic calorimetry. Although the alkali-metal azides studied in this work exhibited no thermal anomalies over the temperature range studied, thallium azide has a bifurcated anomaly with two maxima at (233.0±0.1) K and (242.04±0.02) K. The associated excess entropy was 0.90 cal_th K^?1 mol^?1. The thermal properties of the azides and the corresponding structurally similar hydrogen difluorides are nearly identical. Both have linear symmetrical anions. However, thallium azide shows a solid-solid phase transition not exhibited by thallium hydrogen difluoride. At 298.15 K the values of C_p^o, S^o, and $\text{?{G}{}^{\mathrm{o}}\text{(T)?H}{}^{\mathrm{o}}\text{(0)}}\text{T}$, respectively, are 18.38, 24.86, and 12.676 cal_th K^?1 mol^?1 for potassium azide; 19.09, 28.78, and 15.58 cal_th K^?1 mol^?1 for rubidium azide; 19.89, 32.11, and 18.17 cal_th K^?1 mol^?1 for cesium azide; and 19.26, 32.09, and 18.69 cal_th K^?1 mol^?1 for thallium azide. Heat capacities at constant volume for KN₃ were deduced from infrared and Raman data.     

Heat capacity measurements on BaTa<Subscript>2</Subscript>O<Subscript>6</Subscript> and derivation of its thermodynamic functions

Heat capacity measurements of barium tantalate (BaTa₂O₆) were carried out by using a differential scanning calorimeter at temperatures between 323 and 1323 K. From the heat capacity values of BaTa₂O₆, other thermodynamic functions (enthalpy and entropy increments) were derived between 298.15 and 1323 K. The C _p,m (298.15) value of BaTa₂O₆ was computed as 184.857 J mol^?1 K^?1. Moreover, fitted heat capacities exhibited good agreement with Neumann–Kopp rule at the temperatures between 298.15 and 1300 K.     

Thermodynamic properties of molybdenum pentafluoride vapor

There are calculated for 298 K and higher temperatures the standard entropies of the liquid and the important gas species (monomer, dimer, and trimer) of MoF₅, and their differences in enthalpy and Gibbs energy. Besides estimated mean heat capacities, the input data are: the vapor pressure at one temperature and the saturated-vapor density at two temperatures (based on measurements in this laboratory); the standard entropies of the three gas species (estimated from published spectroscopic data on the crystal and monomer); and an ion-abundance proportion (from a published mass-spectral study). This ion proportion is corrected for fragmentation after demonstrating that changes in the ion proportions for a similar fluoride, RhF₅, can be explained by assuming that the rates of fragmentation of the dimer and trimer are equal. For those input data considered most uncertain (the vapor pressure, the entropies of dimer and trimer, and the ratios of mass-spectral ionization efficiencies) several sets of values covering their respective estimated ranges of uncertainty are used alternatively in the calculations. Results at 298.15 K—expressed in the form “preferred value (probable range due to uncertainty)”, with H^o and G^o relative to the liquid, and S^o—are as follows: liquid, S^o = 46 (44.5 to 49) cal_th K^?1 mol^?1; monomer, H^o = 19 (17 to 22) kcal_th mol^?1, G^o = 8.5 (7.5 to 11.5) kcal_th mol^?1, S^o = 80.6 cal_thK^?1; dimer, H^o = 15.7 (15 to 16) kcal_th mol^?1, G^o = 6.48 (6.45 to 6.51) kcal_th mol^?1, S^o = 123 (121 to 127) cal_th K^?1 mol^?1; trimer, H^o = 17.7 (16 to 21) kcal_th mol^?1, G^o = 8.4 (8.1 to 8.7) kcal_th mol^?1, S^o = 169 (161 to 185) cal_th K^?1 mol^?1. The calculated mole fractions of monomer, dimer, and trimer in the saturated vapor at 298.15 K average 0.027, 0.94, and 0.035, respectively.