Microfluidic chip of fast DNA hybridization using denaturing and motion of nucleic acids

This study presents the effect of fluidic temperatures and velocities on improving DNA hybridization. The efficiency of hybridization could be improved by introducing elevated temperature in the hot region and velocity in the cold region. Compared with the conventional methods, this hybridization microchip was able to increase the hybridization signal 4.6-fold within 30 min. The 1.4-kb single-stranded target DNA was tested. The increasing tendency of the fluorescence intensity was apparent when the temperature was higher than 82 degrees C, and the fluorescence intensity reached an asymptotic value at T>90 degrees C. A mathematical model was proposed to relate the fluorescence intensity of DNA hybridization with the hot-region temperature and the cold-region velocity. Based on these results, the new hybridization chip with the processes of temperature and velocity differences will improve efficiency of DNA detection. The microchip combined with hot-region temperature and cold-region bulk flow velocity effects could provide additional efficiency in DNA hybridization.     

基于微流控芯片的微阵列分析

微阵列芯片具有高通量、微量化和自动化等特点,已经在很多领域得到广泛应用。但是微阵列芯片仍然具有不足之处,如所需设备昂贵、分析时间较长、灵敏度不高、多样品平行分析能力不足等。微流控芯片微米级的通道具有相对较大的比表面积和较短的扩散距离,能够显著加快分析速度、提高检测效率、增强分析性能,并且能够加工大量的平行通道用于多样品分析。目前已经有大量文献报道将微流控芯片和微阵列芯片相结合,发展了独特的杂交方式并在实验和理论上分别证明了两者相结合的优势,本文综述了将微流控芯片技术应用于微阵列分析的研究进展,着重介绍了在微流控芯片上进行微阵列分析时的杂交方式、促进杂交的措施以及杂交过程的数学建模,同时也介绍了其他分析步骤方面的进展。最后分析了目前微流控芯片技术在进行微阵列杂交应用方面的不足及其原因,并指出这两项技术相结合的优势和未来。     

Microfluidic chip for high efficiency DNA extraction

A high efficiency DNA extraction microchip was designed to extract DNA from lysed cells using immobilized beads and the solution flowing back and forth. This chip was able to increase the extraction efficiency by 2-fold when there was no serum. When serum existed in the solution, the extraction efficiency of immobilized beads was 88-fold higher than that of free beads. The extraction efficiency of the microchip was tested under different conditions and numbers of E. coli cells. When the number of E. coli cells was between 10(6) and 10(8) in 25 microl of whole blood, the extraction efficiency using immobilized beads was only slightly higher than that using free beads (10(0) to 10(1) fold). When the number of E. coli cells was in the range 10(4) to 10(6) in 25 microl of whole blood, the extraction efficiency of immobilized beads was greater than that of the free beads (10(1) to 10(2) fold). When the number of E. coli cells was lower, in the range 10(3) to 10(4) in 25 microl of whole blood, the extraction efficiency of immobilized beads was much higher than that of the free beads (10(2) to 10(3) fold). This study indicated that DNA could be efficiently extracted even when the number of bacterial cells was smaller (10(5) to 10(3)). This microfluidic extraction chip could find potential applications in rare sample genomic study.     

Toward a solid-phase nucleic acid hybridization assay within microfluidic channels using immobilized quantum dots as donors in fluorescence resonance energy transfer

The optical properties and surface area of quantum dots (QDs) have made them an attractive platform for the development of nucleic acid biosensors based on fluorescence resonance energy transfer (FRET). Solid-phase assays based on FRET using mixtures of immobilized QD–oligonucleotide conjugates (QD biosensors) have been developed. The typical challenges associated with solid-phase detection strategies include non-specific adsorption, slow kinetics of hybridization, and sample manipulation. The new work herein has considered the immobilization of QD biosensors onto the surfaces of microfluidic channels in order to address these challenges. Microfluidic flow can be used to dynamically control stringency by adjustment of the potential in an electrokinetic-based microfluidics environment. The shearing force, Joule heating, and the competition between electroosmotic and electrophoretic mobilities allow the optimization of hybridization conditions, convective delivery of target to the channel surface to speed hybridization, amelioration of adsorption, and regeneration of the sensing surface. Microfluidic flow can also be used to deliver (for immobilization) and remove QD biosensors. QDs that were conjugated with two different oligonucleotide sequences were used to demonstrate feasibility. One oligonucleotide sequence on the QD was available as a linker for immobilization via hybridization with complementary oligonucleotides located on a glass surface within a microfluidic channel. A second oligonucleotide sequence on the QD served as a probe to transduce hybridization with target nucleic acid in a sample solution. A Cy3 label on the target was excited by FRET using green-emitting CdSe/ZnS QD donors and provided an analytical signal to explore this detection strategy. The immobilized QDs could be removed under denaturing conditions by disrupting the duplex that was used as the surface linker and thus allowed a new layer of QD biosensors to be re-coated within the channel for re-use of the microfluidic chip.     

Microfluidic bead-based multienzyme-nanoparticle amplification for detection of circulating tumor cells in the blood using quantum dots labels

This study reports the development of a microfluidic bead-based nucleic acid sensor for sensitive detection of circulating tumor cells in blood samples using multienzyme-nanoparticle amplification and quantum dot labels. In this method, the microbeads functionalized with the capture probes and modified electron rich proteins were arrayed within a microfluidic channel as sensing elements, and the gold nanoparticles (AuNPs) functionalized with the horseradish peroxidases (HRP) and DNA probes were used as labels. Hence, two signal amplification approaches are integrated for enhancing the detection sensitivity of circulating tumor cells. First, the large surface area of Au nanoparticle carrier allows several binding events of HRP on each nanosphere. Second, enhanced mass transport capability inherent from microfluidics leads to higher capture efficiency of targets because continuous flow within micro-channel delivers fresh analyte solution to the reaction site which maintains a high concentration gradient differential to enhance mass transport. Based on the dual signal amplification strategy, the developed microfluidic bead-based nucleic acid sensor could discriminate as low as 5 fM (signal-to-noise (S/N) 3) of synthesized carcinoembryonic antigen (CEA) gene fragments and showed a 1000-fold increase in detection limit compared to the off-chip test. In addition, using spiked colorectal cancer cell lines (HT29) in the blood as a model system, the detection limit of this chip-based approach was found to be as low as 1 HT29 in 1 mL blood sample. This microfluidic bead-based nucleic acid sensor is a promising platform for disease-related nucleic acid molecules at the lowest level at their earliest incidence.     

Rapid screening of phenylketonuria using a CD microfluidic device

We herein present a compact disc (CD) microfluidic chip based hybridization assay for phenylketonuria (PKU) screening. This CD chip is composed of a polydimethylsiloxane (PDMS) top layer containing 12 DNA hybridization microchannels, and a glass bottom layer with hydrogel pad conjugated DNA oligonucleotides. Reciprocating flow was generated on the CD chip through a simple rotation-pause operation to facilitate rapid DNA hybridization. When rotated the CD chip, the sample solution was driven into the hybridization channel by centrifugal force. When stopped the CD chip, the sample plug was pulled backward through the channel by capillary force. The hybridization assay was firstly validated with control samples and was then used to analyze 30 clinical samples from pregnant women with suspected PKU fetus. The on-chip DNA hybridization was completed in 15 min with a sample consumption as low as 1.5μL, and the limit-of-detection (LOD) of DNA template was 0.7ng/μL. Among the 30 samples tested, V245V mutation was identified in 4 cases while R243Q mutation was detected in one case. Results of the hybridization assay were confirmed by DNA sequencing. This CD-chip based hybridization assay features short analysis time, simple operation and low cost, thus has the potential to serve as the tool for PKU screening.     

一种可绝对定量核酸的数字PCR微流控芯片

构建了一种新型的可进行核酸单分子扩增和核酸绝对定量的数字聚合酶链式反应(数字PCR)微流控芯片. 应用多层软光刻技术, 以聚二甲基硅氧烷(PDMS)作为芯片材料, 盖玻片作为基底制作了具有3层结构以及微阀控制功能的微流控芯片. 芯片的大小与载玻片相当, 可同时检测4个样品, 每个样品通入芯片后平均分配到640个反应小室, 每个小室的体积为6 nL. 以从肺癌细胞A549中提取的18sRNA为样品检测了该芯片的可行性. 将样品稀释数倍后通入芯片, 核酸分子随机分布在640个小室中并扩增. 核酸分子在芯片中的分布符合泊松分布原理, 当样品中待测核酸分子平均拷贝数低于0.5个/小室时, 则每个反应小室包含0个或1个分子. 经过PCR扩增后, 有模板分子的小室检测结果为阳性反应, 而无模板分子的小室为阴性反应, 最后通过计数阳性反应室的个数, 可绝对定量原始待测样品中的目标DNA分子拷贝数. 实验结果表明, 该数字 PCR芯片可实现DNA单分子反应和核酸绝对定量, 具有成本低、 灵敏度高、 节省时间和试剂以及操作简单等优点, 为数字PCR方法在普通实验室的应用提供了一种新途径, 可用于癌症及感染性疾病的早期诊断、 单细胞分析、 产前诊断以及各种细菌病毒的核酸检验等研究.     

集成核酸提取的实时荧光PCR微全分析系统

集成核酸提取的实时荧光PCR微全分析系统将核酸提取、PCR扩增与实时荧光检测进行整合,在同一块微流控芯片上实现了核酸分析过程的全自动和全封闭,具有试剂用量少、分析速度快、操作简便等优点。本研究采用微机械加工技术制作集成核酸提取微流控芯片的阳极模,使用组合模具法和注塑法制作具有3D通道的PDMS基片,与玻璃基底通过等离子体键合封装成集成核酸提取芯片。构建了由微流体速度可调节(0~10 mL/min)的驱动控制装置、温控精度可达0.1℃的TEC温控平台、CCD检测功能模块等组成的微全分析系统。以人类血液裂解液为样品,采用硅胶膜进行芯片上核酸提取。系统根据设置好的时序自动执行,以2 mL/min的流体驱动速度完成20μL裂解液上样、清洗;以1 mL/min的流体驱动速度完成DNA洗脱,抽取PCR试剂与之混合注入到反应腔。提取的基因组DNA以链上内参基因GAPDH为检测对象,并以传统手工提取为对照,在该系统平台上进行PCR扩增和熔解曲线分析实验。片上PCR扩增结果显示,扩增曲线明显,Ct值分别为25.3和26.9。扩增产物进行熔解曲线分析得到的熔解温度一致,均为89.9℃。结果表明,此系统能够自动化、全封闭的在微流控芯片上完成核酸提取、PCR扩增与实时定量分析。     

Modular fluidic resistors to enable widely tunable flow rate and fluidic switching period in a microfluidic oscillator

Microfluidic systems with modular components are attractive alternatives to monolithically integrated microfluidic systems because of their flexibility. In this study, we apply the modular concept on a water‐head‐pressure‐driven microfluidic oscillator and obtain a widely tunable flow rate and fluidic switching period. Modular fluidic resistors can be easily mounted onto and demounted from a main chip by means of plastic male connectors. The connectors enable a leak‐free connection between the modular resistors and main chip (leakage pressure > 140 kPa). With modular resistors, we show independent control of the flow rate and flow switching period of the oscillator system in a wide range (2.5 s–6.4 h and 2 μL/min–2 mL/min). This modular approach can be used to enhance the flexibility of instruction‐embedded microfluidic circuits in which their operational range is limited.     

Cationic polymer coatings for design of electroosmotic flow and control of DNA adsorption

A difficulty with the design and operation of an electrokinetically operated DNA hybridization microfluidic chip is the opposite direction of the electroosmotic flow and electrophoretic mobility of the oligonucleotides. This makes it difficult to simultaneously deliver targets and an appropriate hybridization buffer simultaneously to the probe sites. In this work we investigate the possibility of coating the inner walls of the microfluidic system with hexadimentrine bromide (polybrene, PB) and other cationic polymers in order to reverse the direction of electroosmotic flow so that it acts in the same direction as the electrophoretic transport of the oligonucleotides. The results indicated that the electroosmotic flow (EOF) in channels that were coated with the polymer could be reversed in 1× TBE buffer or 1× SSC buffer. Under these conditions, the DNA and EOF move in the same direction, and the flow can be used to deliver DNA to an area for selective hybridization within the channel. The effects of coating the surface of a nucleic acid microarray with polybrene were also studied to assess non-selective adsorption and stability. The polybrene coating significantly reduced the extent of non-selective adsorption of oligonucleotides in comparison to adsorption onto a glass surface, and the coating did not alter the extent of hybridization. The results suggest that use of the coating makes it possible to achieve semi-quantitative manipulation of nucleic acid oligomers for delivery to an integrated microarray or biosensor.     

Development of a microfluidic biosensor module for pathogen detection

The development of a microfluidic biosensor module with fluorescence detection for the identification of pathogenic organisms and viruses is presented in this article. The microfluidic biosensor consists of a network of microchannels fabricated in polydimethylsiloxane (PDMS) substrate. The microchannels are sealed with a glass substrate and packed in a Plexiglas housing to provide connection to the macro-world and ensure leakage-free flow operation. Reversible sealing permits easy disassembly for cleaning and replacing the microfluidic channels. The fluidic flow is generated by an applied positive pressure gradient, and the module can be operated under continuous solution flow of up to 80 microL min(-1). The biosensor recognition principle is based on DNA/RNA hybridization and liposome signal amplification. Superparamagnetic beads are incorporated into the system as a mobile solid support and are an essential part of the analysis scheme. In this study, the design, fabrication and the optimization of concentrations and amounts of the different biosensor components are carried out. The total time required for an assay is only 15 min including sample incubation time. The biosensor module is designed so that it can be easily integrated with a micro total analysis system, which will combine sample preparation and detection steps onto a single chip.     

Electrochemical microfluidic biosensor for the detection of nucleic acid sequences

A microfluidic biosensor with electrochemical detection for the quantification of nucleic acid sequences was developed. In contrast to most microbiosensors that are based on fluorescence for signal generation, it takes advantage of the simplicity and high sensitivity provided by an amperometric and coulorimetric detection system. An interdigitated ultramicroelectrode array (IDUA) was fabricated in a glass chip and integrated directly with microchannels made of poly(dimethylsiloxane) (PDMS). The assembly was packaged into a Plexiglas housing providing fluid and electrical connections. IDUAs were characterized amperometrically and using cyclic voltammetry with respect to static and dynamic responses for the presence of a reversible redox couple-potassium hexacyanoferrate (ii)/hexacyanoferrate (iii) (ferri/ferrocyanide). A combined concentration of 0.5 microM of ferro/ferricyanide was determined as lower limit of detection with a dynamic range of 5 orders of magnitude. Background signals were negligible and the IDUA responded in a highly reversible manner to the injection of various volumes and various concentrations of the electrochemical marker. For the detection of nucleic acid sequences, liposomes entrapping the electrochemical marker were tagged with a DNA probe, and superparamagnetic beads were coated with a second DNA probe. A single stranded DNA target sequence hybridized with both probes. The sandwich was captured in the microfluidic channel just upstream of the IDUA via a magnet located in the outside housing. Liposomes were lysed using a detergent and the amount of released ferro/ferricyanide was quantified while passing by the IDUA. Optimal location of the magnet with respect to the IDUA was investigated, the effect of dextran sulfate on the hybridization reaction was studied and the amount of magnetic beads used in the assay was optimized. A dose response curve using varying concentrations of target DNA molecules was carried out demonstrating a limit of detection at 1 fmol assay(-1) and a dynamic range between 1 and 50 fmol. The overall assay took 6 min to complete, plus 15-20 min of pre-incubation and required only a simple potentiostat for signal recording and interpretation.     

Droplet microfluidics for amplification-free genetic detection of single cells

In this article we present a novel droplet microfluidic chip enabling amplification-free detection of single pathogenic cells. The device streamlines multiple functionalities to carry out sample digitization, cell lysis, probe-target hybridization for subsequent fluorescent detection. A peptide nucleic acid fluorescence resonance energy transfer probe (PNA beacon) is used to detect 16S rRNA present in pathogenic cells. Initially the sensitivity and quantification abilities of the platform are tested using a synthetic target mimicking the actual expression level of 16S rRNA in single cells. The capability of the device to perform "sample-to-answer" pathogen detection of single cells is demonstrated using E. coli as a model pathogen.     

Cell lysis on a microfluidic CD (compact disc)

Cell lysis was demonstrated on a microfluidic CD (Compact Disc) platform. In this purely mechanical lysis method, spherical particles (beads) in a lysis chamber microfabricated in a CD, cause disruption of mammalian (CHO-K1), bacterial (Escherichia coli), and yeast (Saccharomyces cerevisiae) cells. Interactions between beads and cells are generated in the rimming flow established inside a partially filled annular chamber in the CD rotating around a horizontal axis. To maximize bead-cell interactions in the lysis chamber, the CD was spun forward and backwards around this axis, using high acceleration for 5 to 7 min. Investigation on inter-particle forces (friction and collision) identified the following parameters; bead density, angular velocity, acceleration rate, and solid volume fraction as having the most significant contribution to cell lysis. Cell disruption efficiency was verified either through direct microscopic viewing or measurement of the DNA concentration after cell lysing. Lysis efficiency relative to a conventional lysis protocol was approximately 65%. In the long term, this work is geared towards CD based sample-to-answer nucleic acid analysis which will include cell lysis, DNA purification, DNA amplification, and DNA hybridization detection.     

High sensitivity PCR assay in plastic micro reactors

Small volume operation and rapid thermal cycling have been subjects of numerous reports in micro reactor chip development. Sensitivity aspects of the micro PCR reactor have not been studied in detail, however, despite the fact that detection of rare targets or trace genomic material from clinical and/or environmental samples has been a great challenge for microfluidic devices. In this study, a serpentine shaped thin (0.75 mm) polycarbonate plastic PCR micro reactor was designed, constructed, and tested for not only its rapid operation and efficiency, but also its detection sensitivity and specificity, in amplification of Escherichia coli (E. coli) K12-specific gene fragment. At a template concentration as low as 10 E. coli cells (equivalent to 50 fg genomic DNA), a K12-specific gene product (221 bp) was adequately amplified with a total of 30 cycles in 30 min. Sensitivity of the PCR micro reactor was demonstrated with its ability to amplify K12-specific gene from 10 cells in the presence of 2% blood. Specificity of the polycarbonate PCR micro reactor was also proven through multiplex PCR and/or amplification of different pathogen-specific genes. This is, to our knowledge, the first systematic study of assay sensitivity and specificity performed in plastic, disposable micro PCR devices.     

Microalgal motility measurement microfluidic chip for toxicity assessment of heavy metals

A polydimethylsiloxane microfluidic chip has been developed for the estimation of toxic heavy metals based on measurement of mobility of marine microalgae. The chip is mainly composed of an upstream concentration gradient generator and a downstream perfusion-based chemotatic module. The processes of toxic liquid dilution and diffusion, microalgal culturing, cell stimulation, and online screening can be integrated in this chip, which makes it an attractive approach to simplify toxicity testing procedures. The microalgal motility was adopted as a microfluidic bioassay signal and was evaluated as the percentage of motile cells, curvilinear velocity, average path velocity, and straight line velocity. Two mobile marine microalgae, Platymonas subcordiformis and Platymonas helgolandica var. tsingtaoensis, were confined in the chemotatic module and stimulated by the eight concentration gradients of Cu and Cd generated by the concentration gradient generator. In all cases, a toxic response was detected (i.e., a dose-related inhibition of motility was observed). Only 1.5?h was needed to predict EC₅₀ values. Thus, the microfluidic chip developed was proved to be useful as a simple and rapid approach in heavy metal detection and might be expanded as a conventional test method in environmental toxicity assessment.     

Multiplexed proteomic sample preconcentration device using surface-patterned ion-selective membrane

In this paper, we report a new method of fabricating a high-throughput protein preconcentrator in poly(dimethylsiloxane) (PDMS) microfluidic chip format. We print a submicron thick ion-selective membrane on the glass substrate by using standard patterning techniques. By simply plasma-bonding a PDMS microfluidic device on top of the printed glass substrate, we can integrate the ion-selective membrane into the device and rapidly prototype a PDMS preconcentrator without complicated microfabrication and cumbersome integration processes. The PDMS preconcentrator shows a concentration factor as high as approximately 10(4) in 5 min. This printing method even allows fabricating a parallel array of preconcentrators to increase the concentrated sample volume, which can facilitate an integration of our microfluidic preconcentrator chip as a signal enhancing tool to various detectors such as a mass spectrometer.     

Biomolecular theorem proving on a chip: a novel microfluidic solution to a classical logic problem

Biomolecules inside a microfluidic system can be used to solve computational problems, such as theorem proving, which is an important class of logical reasoning problems. In this article, the Boolean variables (literals) were represented using single-stranded DNA molecules, and theorem proving was performed by the hybridization and ligation of these variables into a double-stranded "solution" DNA. Then, a novel sequential reaction mixing method in a microfluidic chip was designed to solve a theorem proving problem, where a reaction loop and three additional chambers were integrated and controlled by pneumatic valves. DNA hybridization, ligation, toehold-mediated DNA strand displacement, exonuclease I digestion, and fluorescence detection of the double-stranded DNA were sequentially performed using this platform. Depending on the computational result, detection of the correct answer was demonstrated based on the presence of a fluorescence signal. This result is the first demonstration that microfluidics can be used to facilitate DNA-based logical inference.     

Waveguide confined Raman spectroscopy for microfluidic interrogation

We report the first implementation of the fiber based microfluidic Raman spectroscopic detection scheme, which can be scaled down to micrometre dimensions, allowing it to be combined with other microfluidic functional devices. This novel Raman spectroscopic detection scheme, which we termed as Waveguide Confined Raman Spectroscopy (WCRS), is achieved through embedding fibers on-chip in a geometry that confines the Raman excitation and collection region which ensures maximum Raman signal collection. This results in a microfluidic chip with completely alignment-free Raman spectroscopic detection scheme, which does not give any background from the substrate of the chip. These features allow a WCRS based microfluidic chip to be fabricated in polydimethylsiloxane (PDMS) which is a relatively cheap material but has inherent Raman signatures in fingerprint region. The effects of length, collection angle, and fiber core size on the collection efficiency and fluorescence background of WCRS were investigated. The ability of the device to predict the concentration was studied using urea as a model analyte. A major advantage of WCRS is its scalability that allows it to be combined with many existing microfluidic functional devices. The applicability of WCRS is demonstrated through two microfluidic applications: reaction monitoring in a microreactor and detection of analyte in a microdroplet based microfluidic system. The WCRS approach may lead to wider use of Raman spectroscopy based detection in microfluidics, and the development of portable, alignment-free microfluidic devices.     

High‐throughput and sensitive particle counting by a novel microfluidic differential resistive pulse sensor with multidetecting channels and a common reference channel

High‐throughput particle counting by a differential resistive pulse sensing method in a microfluidic chip is presented in this paper. A sensitive differential microfluidic sensor with multiple detecting channels and one common reference channel was devised. To test the particle counting performance of this chip, an experimental system which consists of the microfluidic chip, electric resistors, an amplification circuit, a LabView based data acquisition device was developed. The influence of the common reference channel on the S/N of particle detection was investigated. The relationship between the hydraulic pressure drop applied across the detecting channel and the counting throughput was experimentally obtained. The experimental results show that the reference channel designed in this work can improve the S/N by ten times, thus enabling sensitive high‐throughput particle counting. Because of the greatly improved S/N, the sensing gate with a size of 25 × 50 × 10 μm (W × L × H) in our chips can detect and count particles larger than 1.5 μm in diameter. The counting throughput increases with the increase in the flowing velocity of the sample solution. An average throughput of 7140/min under a flow rate of 10 μL/min was achieved. Comparing with other methods, the structure of the chip and particle detecting mechanism reported in this paper is simple and sensitive, and does not have the crosstalking problem. Counting throughput can be adjusted simply by changing the number of the detecting channels.