Application of flowing-stream techniques to water analysis Part II. General quality parameters and anionic compounds: halogenated, sulphur and metalloid species

In the first part of this review [Talanta 60 (2000) 867], flowing-stream methods (namely, segmented flow analysis (SFA), continuous-flow analysis (CFA), flow-injection analysis (FIA), sequential-injection analysis (SIA), multicommuted flow-injection analysis (MCFIA) and multisyringe flow-injection analysis (MSFIA)) were presented as powerful analytical tools for nutrient determination in water samples when coupled to photometric/fluorimetric detection, flow-through ion-selective electrodes or amperometric sensors.In the present paper, relevant flow methods applied to the monitoring of anionic species as well as to the determination of general parameters for water quality evaluation (such as pH, alkalinity, chemical and biochemical oxygen demand, conductivity and total ionic content) are reviewed, and their background, detection technique and noteworthy analytical features are detailed. Furthermore, other techniques, such as flow systems connected to hydride-generation atomic absorption spectrometry, should be highlighted as practical approaches for metalloid determination since a series of speciation schemes are demonstrated to be readily adaptable.     

A comparison between electrokinetic capillary chromatography and absorption spectroscopy for the analysis of peptide-micelle association by weak hydrophobic interactions

Micellar electrokinetic capillary chromatography (MEKC) was compared to absorption spectroscopy to estimate equilibrium association constans (K(as)) for peptide-micelle systems involving three peptides (leucine-enkephalin, methionine-enkephalin and leucine-phenylalanine (LF)) and two surfactant micelles (sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB)). Buffer pH was chosen to minimize purely electrostatic interactions between peptides and micelles that could not be interrogated by absorption spectroscopy. Viscosity-corrected MEKC mobilities gave reasonably similar estimates of K(as) between the two methods for all three peptide-SDS micelle systems, with K(as) values ranging from 13.7 +/- 0.3 to 49 +/- 1 M(-1). For CTAB, estimates of K(as) for LF-CTAB micelle association were of the same order of magnitude as the SDS micelle by the two methods of estimation. On the other hand, enkephalin-CTAB micelle binding was about 10 times stronger (K(as) = 122 +/- 3 M(-1) to 311 +/- 9 M(-1)) than the enkephalin-SDS micelle binding. In addition, MEKC underestimated the K(as) values relative to spectroscopy by a factor of 2-3 for the enkephalin-CTAB system.     

Reactivity of p-nitrostyrene oxide as an alkylating agent. A kinetic approach to biomimetic conditions

The alkylating potential of p-nitrostyrene oxide (pNSO)--a compound used as a substrate to study the activity of epoxide hydrolases as well as in polymer production and in the pharmaceutical industry--was investigated kinetically. The molecule 4-(p-nitrobenzyl)pyridine (NBP), as a model nucleophile for DNA bases, was used as an alkylation substrate. In order to gain insight into the effect of the hydrolysis of pNSO, as well as the hydrolysis of the NBP-pNSO adduct on the pNSO alkylating efficiency, these two competing reactions were studied in parallel with the main NBP-alkylation reaction. The following conclusions were drawn: (i) pNSO reacts through an S(N)2 mechanism, with NBP to form an adduct, pNSO-NBP (AD). The rate equation for the adduct formation is: r = d[AD]/dt = k(alk)[NBP][pNSO]-k(hyd)(AD) [AD] (k(alk), and k(hyd)(AD) being the alkylation rate constant and the NBP-pNSO adduct hydrolysis rate constant, respectively); (ii) the alkylating capacity of pNSO, defined as the fraction of initial alkylating agent that forms the adduct, is similar to that of mutagenic agents as effective as β-propiolactone. The instability of the pNSO-NBP adduct formed could be invoked to explain the lower mutagenicity shown by pNSO; (iii) the different stabilities of the α and β-adducts formed between NBP and styrene oxides show that the alkylating capacity f = k(alk)[NBP]/(k(alk)[NBP] + k(hyd)) (k(hyd) being the pNSO hydrolysis rate constant) as well as the alkylating effectiveness, AL = f/k(hyd)(AD), are useful tools for correlating the chemical reactivity and mutagenicity of styrene oxides; (iv) a pNSO-guanosine adduct was detected.     

Direct enantiomeric TLC resolution of dl-penicillamine using (R)-mandelic acid and l-tartaric acid as chiral impregnating reagents and as chiral mobile phase additive

DL-Penicillamine has been resolved into its enantiomers by normal-phase TLC using L-tartaric acid as chiral impregnating reagent as well as chiral mobile phase additive, while (R)-mandelic acid has been found to be successful as a chiral impregnating reagent. The solvent system acetonitrile-methanol-water (5:1:1, v/v) was found to be successful when L-tartaric acid was used as impregnating agent while the solvent combination acetonitrile-methanol-(0.5% l-tartaric acid in water, pH 5)-glacial acetic acid (7:1:1.1:0.7, v/v) was successful as mobile phase as it contained L-tartaric acid as the chiral additive. (R)-mandelic acid was successful as chiral impregnating reagent with ethyl acetate-methanol-water (3:1:1, v/v), as the mobile phase. The effects of concentration of chiral selectors, temperature and pH were examined on enantiomeric resolution. The spots were detected with iodine vapors and the detection limits were found to be 0.12 microg for each enantiomer of penicillamine with L-tartaric acid, under both the conditions, and 0.11 microg with (R)-mandelic acid.     

Theoretical predictions of nuclear magnetic resonance parameters in a novel organo-xenon species: chemical shifts and nuclear quadrupole couplings in HXeCCH

We calibrate the methodology for the calculation of nuclear magnetic resonance (NMR) properties in novel organo-xenon compounds. The available state-of-the-art quantum-chemical approaches are combined and applied to the HXeCCH molecule as the model system. The studied properties are (129)Xe, (1)H, and (13)C chemical shifts and shielding anisotropies, as well as (131)Xe and (2)H nuclear quadrupole coupling constants. The aim is to obtain, as accurately as currently possible, converged results with respect to the basis set, electron correlation, and relativistic effects, including the coupling of relativity and correlation. This is done, on one hand, by nonrelativistic correlated ab initio calculations up to the CCSD(T) level and, on the other hand, for chemical shifts and shielding anisotropies by the leading-order relativistic Breit-Pauli perturbation theory (BPPT) with correlated ab initio and density-functional theory (DFT) reference states. BPPT at the uncorrelated Hartree-Fock level as well as the corresponding fully relativistic Dirac-Hartree-Fock method are found to be inapplicable due to a dramatic overestimation of relativistic effects, implying the influence of triplet instability in this multiply bonded system. In contrast, the fully relativistic second-order Moller-Plesset perturbation theory method can be applied for the quadrupole coupling, which is a ground-state electric property. The performance of DFT with various exchange-correlation functionals is found to be inadequate for the nonrelativistic shifts and shielding anisotropies as compared to the CCSD(T) results. The relativistic BPPT corrections to these quantities can, however, be reasonably predicted by DFT, due to the improved triplet excitation spectrum as compared to the Hartree-Fock method, as well as error cancellation within the five main BPPT contributions. We establish three computationally feasible models with characteristic error margins for future calculations of larger organo-xenon compounds to guide forthcoming experimental NMR efforts. The predicted (129)Xe chemical shift in HXeCCH is in a novel range for this nucleus, between weakly bonded or solvated atomic xenon and xenon in the hitherto characterized molecules.     

Sequential pressurized liquid extraction to determine brain-originating fatty acids in meat products as markers in bovine spongiform encephalopathy risk assessment studies

A new approach using sequential pressurized liquid extraction described recently [J. Poerschmann, R. Carlson, J. Chromatogr. A, 1127 (2006) 18-25] was applied to determine lipid markers originating from central nervous system (CNS) tissue of cows in heat-processed sausages. These studies are very important in quality control as well as risk assessment studies in the face of the bovine spongiform encephalopathy (BSE) crisis. Diagnostic CNS lipid markers, which should not be present in meat products without CNS addition, were recognized on complete transesterification as polar 2-hydroxy-fatty acids (2OH-24:0, 2OH-24:1, 2OH-22:0, 2OH-18:0, shorthand designation) as well as odd-numbered non-branched fatty acids beyond C(22). An array of other fatty acids including lignoceric acid (24:0), nervonic acid (24:1), arachidonic acid (20:4), and polyunsaturated nC(22)-surrogates are strongly related to CNS lipids, but occur as traces in meat products without CNS addition as well, thus reducing their value as diagnostic markers. Samples including meat products without CNS addition, meat with 3% CNS addition, as well as pure CNS homogenates, were subjected to sequential PLE (pressurized liquid extraction) consisting of two steps: n-hexane/acetone 9:1 (v/v) extraction at 50 degrees C to remove neutral lipids, followed by chloroform/methanol 1:4 (v/v) extraction at 110 degrees C to isolate polar CNS lipids (two 10 min PLE cycles each). To enhance the fractionation efficiency, cyanopropyl modified silica as well as chemically not modified silica sorbent was used at the outlet of the PLE cartridge to retard polar lipids in the first extraction step. This method proved superior to widely distributed exhaustive lipid extraction followed by solid-phase extraction (SPE) using silica regarding lipid recoveries and clear-cut boundaries between lipid classes. Methodological studies showed that the alcoholysis using trimethylchlorosilane/methanol (1:9, v/v) is an excellent method for the complete transesterification of lipids and quantitative formation of methyl esters.     

Water-soluble monodispersed lanthanide oxide submicrospheres: PVP-assisted hydrothermal synthesis, size-control and luminescence properties

We report a facile hydrothermal synthetic route to prepare a class of monodispersed lanthanide-based compound submicrospheres with controllable size, which employs raw lanthanide oxides as starting material, urea as precipitator and poly(N-vinyl-2-pyrrolidone) (PVP) as surfactant. Dependent on the intrinsic properties of respective lanthanide, the resulting products could be in the form of oxide, hydroxide or basic carbonate. These lanthanide hydroxides or basic carbonates can be easily transformed into their corresponding oxides by calcination, retaining the same morphology and size dispersion. The formation mechanism of these lanthanide-based compound submicrospheres is investigated and PVP plays a critical role in forming uniform and well-dispersed products. Furthermore, this method could be extended to a binary system by using two kinds of lanthanide oxides as starting material, resulting in doped-type lanthanide oxide submicrospheres (such as Y(2)O(3):Eu(3+)). The Y(2)O(3):Eu(3+) submicrospheres exhibit nearly uniform spherical morphology and narrow size distribution as well as good water solubility and sharp spectral emission at 610 nm (corresponding to the 5D(0)-7F(2) transition of Eu(3+)). This makes them attractive materials for applications in fields such as fluorescent lamps, field emission displays (FEDs) or LCDs, or as biomedical labels and molecular probes.     

Two-dimensional resonance enhanced multiphoton ionization of H(i)Cl; i = 35, 37: state interactions, photofragmentations and energetics of high energy Rydberg states

Mass spectra were recorded for (2 + n) resonance enhanced multiphoton ionization (REMPI) of HCl as a function of resonance excitation energy in the 88865-89285 cm(-1) region to obtain two-dimensional REMPI data. Band spectra due to two-photon resonance transitions to number of Rydberg states (Ω' = 0, 1, and 2) and the ion-pair state V((1)Σ(+)(Ω' = 0)) for H(35)Cl and H(37)Cl were identified, assigned, and analyzed with respect to Rydberg to ion-pair interactions. Perturbations show as line-, hence energy level-, shifts, as well as ion signal intensity variations with rotational quantum numbers, J', which, together, allowed determination of parameters relevant to the nature and strength of the state interactions as well as dissociation and ionization processes. Whereas near-resonance, level-to-level, interactions are found to be dominant in heterogeneous state interactions (ΔΩ ≠ 0) significant off-resonance interactions are observed in homogeneous interactions (ΔΩ = 0). The alterations in Cl(+) and HCl(+) signal intensities prove to be very useful for spectra assignments. Data relevant to excitations to the j(3)Σ(0(+)) Rydberg states and comparison with (3 + n) REMPI spectra allowed reassignment of corresponding spectra peaks. A band previously assigned to an Ω = 0 Rydberg state was reassigned to an Ω = 2 state (ν(0) = 88957.6 cm(-1)).     

Selective extraction of gallium from aluminum and indium using tripod phenolic ligands

Solvent extraction of trivalent group 13 metal cations such as aluminum, gallium and indium with tripod quadridentate phenolic ligand, tris(2-hydroxy-3,5-dimethylbenzyl)amine (H(3)tdmba), was investigated as fundamental study for their mutual separation. Gallium was extracted almost quantitatively as Ga(tdmba) (logK(ex)=-6.66+/-0.06 on using chloroform as extraction solvent), whereas aluminum and indium were hardly extracted due to steric hindrance on complexation of them with the ligand. The extracted Ga species was estimated as trigonal bipyramidal complex with one H(2)O molecule. Furthermore, extractability of Ga was increased by changing the ligand to more acidic tris(5-chloro-2-hydroxy-3-methylbenzyl)amine (H(3)tcmba) (logK(ex)=-6.18+/-0.18 on using dichloroethane as extraction solvent).     

Recent progress of interconnecting layer for tandem organic solar cells

This paper has reviewed: (1) the two unique advantages of tandem organic solar cells (OSCs) compared to single OSCs; (2) the challengings as well as strategies to develop qualified interconnecting layer (ICL) for tandem OSCs. More specifically, firstly, the two key advantages unique to tandem OSCs as compared to single OSCs, namely minimizing sub-bandgap transmission and thermalization loss as well as realizing optical thick and electrical thin structures, have been discussed. Secondly, the ICL, as one of the most challenging issue in tandem OSCs that needs to fulfill the optical, electrical and mechanical requirements simultaneously to realize a qualified ICL has been reviewed. As one of the most challenging requirement among the three, the electrical requirement and its corresponding three different solving strategies have been discussed in detail, revealing a bright future for developing a general strategy to realizing qualified ICL composed of different hole transporting layer (HTL) and electron transporting layer (ETL).     

Organically modified montmorillonite and chitosan–phosphotungstic acid complex nanocomposites as high performance membranes for fuel cell applications

Nanocomposite membranes based on polyelectrolyte complex (PEC) of chitosan/phosphotungstic acid (PWA) and different types of montmorillonite (MMT) were prepared as alternative membranes to Nafion for direct methanol fuel cell (DMFC) applications. Fourier transform infrared spectroscopy (FTIR) revealed an electrostatically fixed PWA within the PEC membranes, which avoids a decrease in proton conductivity at practical condition. Various amounts of pristine as well as organically modified MMT (OMMT) (MMT: Cloisite Na, OMMT: Cloisite 15A, and Cloisite 30B) were introduced to the PEC membranes to decrease in methanol permeability and, thus, enhance efficiency and power density of the cells. X-ray diffraction patterns of the nanocomposite membranes proved that MMT (or OMMT) layers were exfoliated in the membranes at loading weights of lower than 3 wt.%. Moreover, the proton conductivity and the methanol permeability as well as the water uptake behavior of the manufactured nanocomposite membranes were studied. According to the selectivity parameter, ratio of proton conductivity to methanol permeability, the PEC/2 wt.% MMT 30B was identified as the optimum composition. The DMFC performance tests were carried out at 70 °C and 5 M methanol feed and the optimum membrane showed higher maximum power density as well as acceptable durability compared to Nafion 117. The obtained results indicated that owing to the relatively high selectivity and power density, the optimum nanocomposite membrane could be considered as a promising polyelectrolyte membrane (PEM) for DMFC applications.     

Oscillatory transverse electric field enhances protein resolution and capacity of size-exclusion chromatography

Protein separations by a novel size-exclusion electrochromatography (SEEC) are presented. The present SEEC, denoted as pSEEC, was established with an oscillatory low-voltage electric field perpendicular to the mobile-phase streamline. Retention experiments with different proteins indicated that the influence of electric field strength on the partition coefficient is different for different proteins as well as for the same protein under different mobile-phase conditions. These results of protein retention led to the experimental design of protein separations with binary mixtures of BSA and immunoglobulin G (IgG), myoglobin (Myo) and lysozyme (Lys), as well as ovalbumin (Oval) and Myo. The separation results for the binary protein systems sufficiently exhibited the applicability of the pSEEC for various separations in terms of their molecular weights (MWs) as well as pIs. For example, it was possible to separate the gel-excluded proteins (BSA/IgG) as well as gel-permeable and similar-molecular-weight proteins (Myo/Lys) by the pSEEC. Moreover, in the cases of Oval/ Myo, which could be partially separated by size-exclusion chromatography, the use of the pSEEC greatly improved the resolution and the separation became possible at high sample loading. The results indicate that the pSEEC technology is promising for preparative protein separations.     

Partially linearized, fully size-extensive, and reduced multireference coupled-cluster methods. II. Applications and performance

The partially linearized (pl), fully size-extensive multireference (MR) coupled-cluster (CC) method, fully accounting for singles (S) and doubles (D) and approximately for a subset of primary higher than doubles, referred to as plMR CCSD, as well as its plMR CCSD(T) version corrected for secondary triples, as described in Part I of this paper [X. Li and J. Paldus, J. Chem. Phys. 128, 144118 (2008)], are applied to the problem of bond breaking in the HF, F2, H2O, and N2 molecules, as well as to the H4 model, using basis sets of a DZ or a cc-pVDZ quality that enable a comparison with the full configuration interaction (FCI) exact energies for a given ab initio model. A comparison of the performance of the plMR CCSD/CCSD(T) approaches with those of the reduced MR (RMR) CCSD/CCSD(T) methods, as well as with the standard single reference (SR) CCSD and CCSD(T) methods, is made in each case. For the H4 model and N2 we also compare our results with the completely renormalized (CR) CC(2,3) method [P. Piecuch and M. W?och, J. Chem. Phys. 123, 224105 (2005)]. An important role of a proper choice of the model space for the MR-type methods is also addressed. The advantages and shortcomings of all these methods are pointed out and discussed, as well as their size-extensivity characteristics, in which case we distinguish supersystems involving noninteracting SR and MR subsystems from those involving only MR-type subsystems. Although the plMR-type approaches render fully size-extensive results, while the RMR CCSD may slightly violate this property, the latter method yields invariably superior results to the plMR CCSD ones and is more easy to apply in highly demanding cases, such as the triple-bond breaking in the nitrogen molecule.     

Cyclopropylamines from N,N-dialkylcarboxamides and Grignard reagents in the presence of titanium tetraisopropoxide or methyltitanium triisopropoxide

Thirty-three different N,N-dialkyl- and N-alkyl-N-phosphorylalkyl-substituted carboxamides 9-17 were treated with unsubstituted as well as with 2-alkyl-, 2,2-dialkyl-, and 3-alkenyl-substituted ethylmagnesium bromides 6 in the presence of stoichiometric amounts of titanium tetraisopropoxide or methyltitanium triisopropoxide to furnish substituted cyclopropylamines 20-25 in 20-98% yield, depending on the substituents with no (1:1) to excellent (>25:1) diastereoselectivities. Generally higher yields (up to 98%) of the cyclopropylamines 20-28 without loss of the diastereoselectivity were obtained with methyltitanium triisopropoxide as the titanium mediator. Under these conditions, even dioxolane-protected ketones and halogen-substituted and chiral as well as achiral alkyloxyalkyl-substituted carboxamides could be converted to the correspondingly substituted cyclopropylamines with unsubstituted as well as phenyl- and a variety of alkyl-substituted ethylmagnesium bromides in addition to numerous heteroatom-containing (e.g., halogen-, trityloxy-, tetrahydropyranyloxy-substituted) Grignard reagents (62 examples altogether). The transformation of N,N-diformylalkylamines 54 with ethylmagnesium bromide in the presence of methyltitanium triisopropoxide to N,N-dicyclopropyl-N-alkylamines 55 can be brought about in up to 82% yield (6 examples). An asymmetric variant of the titanium-mediated cyclopropanation of N,N-dialkylcarboxamides has been developed by applying chiral titanium mediators generated from stoichiometric amounts of titanium tetraisopropoxide and chiral diamino or diol ligands, respectively. The most efficient chiral mediators turned out to be titanium bistaddolates that provided the corresponding cyclopropylamines with enantiomeric excesses (ee) of up to 84%. Evaluation of several silyl-based additives revealed that the reaction can also efficiently be carried out with substoichiometric amounts (down to 25 mol%) of the titanium reagent, as long as 2-aryl- or 2-ethenyl-substituted ethylmagnesium halides are used and a concomitant slight decrease in yields is accepted. The newly developed methodology was successfully applied for the preparation of analogues with cyclopropylamine moieties of known drugs and natural products such as the nicotine metabolite (S)-Cotinine as well as the insecticides Dinotefuran and Imidacloprid.     

Fluorescent and colorimetric probes for mercury(II): tunable structures of electron donor and π-conjugated bridge

A new series of intramolecular-charge-transfer (ICT) molecules (compounds 1, 2, and 3) were synthesized by attaching various electron-donating thiophenes groups to a triphenylamine backbone with an aldehyde group as the electron acceptor. Based on the protection reaction between ethanethiol and aldehyde, the corresponding dithioacetals (compounds S1, S2, and S3) were prepared to serve as novel colorimetric and fluorescent chemosensors for Hg(2+) ions. Also, compound S1 was further utilized to construct the chemical-reaction-based conjugated polymer probe (PS1) towards Hg(2+) ions. In the presence of as little as 10 nM Hg(2+), compound PS1 displayed an apparent change in the fluorescent intensity. The sensing processes were revealed to be mediated by ICT, as confirmed by time-dependent DFT calculations. Furthermore, compound S1 was successfully applied to microscopic imaging for the detection of Hg(2+) in HeLa cells with ratiometric fluorescent methods.     

Compressional, temporal, and compositional behavior of H2-O2 compound formed by high pressure x-ray irradiation

X-ray irradiation was found to convert H(2)O at pressures above 2 GPa into a novel molecular H(2)-O(2) compound. We used optical Raman spectroscopy to explore the behavior of x-ray irradiated H(2)O samples as a function of pressure, time, and composition. The compound was found to be stable over a period of two years, as long as high pressure conditions (>2 GPa) were maintained. The Raman shifts for the H(2) and O(2) vibrons behaved differently from pure H(2) and O(2) as pressure was increased on the compound up to 70 GPa, indicating that it remains a distinct, molecular compound. Based on spectra taken from different locations in a single sample, it appears that multiple forms of the H(2)-O(2) compound exist. The structure and composition of the starting material plays an important role in compound formation, as we found that hydrogen-filled ice clathrate C(2) (H(2))H(2)O did not undergo the same dissociation as observed in ice VII upon x-ray irradiation until pressure was increased to above 10 GPa.     

Effect of PVA surrounding medium on ZnSe nanoparticles: size, optical, and electrical properties

Polyvinyl alcohol (PVA) matrix was used to confine the particle size of ZnSe nanocrystallites as well as the variation of zinc (Zn) to selenium (Se) ion ratio which showed a remarkable decrease on the particle size as this ratio increased. The particle size decrease was monitored from the UV-vis absorption measurement as well as photoluminescence which suffered a blue shift with particle size decrease. The particle size was characterized with the aid of X-ray diffraction (XRD). The Raman spectra showed that, as the particle size increases, the peak position of the line centers (LO) mode were found to be red shifted from 239 to 234 cm(-1), accompanied by an increase in the full-width at half-maximum (FWHM). The electrical measurements and FT-IR spectra (overtone and normal) band vibration were used to study the effect of ZnSe NPs size on the PVA matrix.     

The effect of interfacial microstructure on the lipid oxidation stability of oil-in-water emulsions

Novel rattle-type magnetic mesoporous carbon spheres are successfully prepared using composite spheres with Fe(3)O(4) as core and mesoporous SiO(2) as shell plus solid SiO(2) as a middle layer as templates. These rattle-type spheres possess the magnetization strength of as high as 37.5 emu/g, high and tunable specific surface areas (382-512.6 m(2)/g) due to mesoporous carbon shells. This magnetic rattle-type structure and the readily accessible mesoporous shell are very favoring for the fast adsorption and release of guest objects triggered by external stimulus, for example, the spheres showed very good adsorptive property to dye.     

Secondary metabolites isolated from Piper chimonantifolium and their antifungal activity

In this study, the CH(2)Cl(2) extract from leaves of Piper chimonantifolium was subjected to several chromatographic separation procedures to afford one chromene (gaudichaudianic acid) as a major compound as well as two flavonoids (dihydrooroxylin and pinocembrin) and three steroids (sitosterol, sitosteryl palmitate and stigmasterol). The structures of all determined compounds were characterised by spectrometric analysis, mainly mass spectrometry and NMR, as well as their optical properties. This article describes the first phytochemical study of the leaves of P. chimonantifolium and an evaluation of the antifungal activity of its major compounds.     

Nanomaterialien zum Anfassen. Do‐it‐yourself !

Eight selected experiments intend at demonstrating synthesis, properties, function and application of nanomaterials. The reader should be stimulated to “Do‐it‐yourself” experiments at schools as well as at universities. In detail the experiments are: (1) Light scattering of suspensions, (2) Self‐made opals, (3) Quantum‐Size effects and red gold, (4) Surfaces and surface functionalization, (5) Pyrophoric iron, (6) Superparamagnetism and magnetic liquids, (7) TiO₂ and dye‐sensitized solar cells as well as (8) Phosphors and luminescent biomarkers. All experiments are organized to allow for simple and fast implementation, although this implies a certain limitation regarding the quality of the material properties in detail. Altogether, the interest in nanosciences and nanotechnology should be aroused as well as the curiosity to learn even more.