Effects of surface heterogeneity on flow circulation in electroosmotic flow in microchannels

The characteristics of electroosmotic flow in a cylindrical microchannel with non-uniform zeta potential distribution are investigated in this paper. Two-dimensional full Navier–Stokes equation is used to model the flow field and the pressure field. The numerical results show the distorted electroosmotic velocity profiles and various kinds of flow circulation resulting from the axial variation of the zeta potential. The influences of heterogeneous patterns of zeta potential on the velocity profile, the induced pressure distribution and the volumetric flow rate are discussed in this paper. This work shows that using either heterogeneous patterns of zeta potential or a combination of a heterogeneous zeta potential distribution and an applied pressure difference over the channel can generate local flow circulations and hence provide effective means to improve the mixing between different solutions in microchannels.     

Characterization of electrokinetic mobility of microparticles in order to improve dielectrophoretic concentration

Insulator-based dielectrophoresis (iDEP), an efficient technique with great potential for miniaturization, has been successfully applied for the manipulation of a wide variety of bioparticles. When iDEP is applied employing direct current (DC) electric fields, other electrokinetic transport mechanisms are present: electrophoresis and electroosmotic flow. In order to concentrate particles, iDEP has to overcome electrokinetics. This study presents the characterization of electrokinetic flow under the operating conditions employed with iDEP; in order to identify the optimal conditions for particle concentration employing DC-iDEP, microparticle image velocimetry (μPIV) was employed to measure the velocity of 1-μm-diameter inert polystyrene particles suspended inside a microchannel made from glass. Experiments were carried out by varying the properties of the suspending medium (conductivity from 25 to 100 μS/cm and pH from 6 to 9) and the strength of the applied electric field (50–300 V/cm); the velocities values obtained ranged from 100 to 700 μm/s. These showed that higher conductivity and lower pH values for the suspending medium produced the lowest electrokinetic flow, improving iDEP concentration of particles, which decreases voltage requirements. These ideal conditions for iDEP trapping (pH = 6 and σ _m = 100 μS/cm) were tested experimentally and with the aid of mathematical modeling. The μPIV measurements allowed obtaining values for the electrokinetic mobilities of the particles and the zeta potential of the glass surface; these values were used with a mathematical model built with COMSOL Multiphysics software in order to predict the dielectrophoretic and electrokinetic forces exerted on the particles; the modeling results confirmed the μPIV findings. Experiments with iDEP were carried out employing the same microparticles and a glass microchannel that contained an array of cylindrical insulating structures. By applying DC electric fields across the insulating structures array, it was seen that the dielectrophoretic trapping was improved when the electrokinetic force was the lowest; as predicted by μPIV measurements and the mathematical model. The results of this study provide guidelines for the selection of optimal operating conditions for improving insulator-based dielectrophoretic separations and have the potential to be extended to bioparticle applications. Figure Comparison of experimental measurements and mathematical modeling of electrokinetic and dielectrophoretic effects on microparticles

The zeta potential of cyclo-olefin polymer microchannels and its effects on insulative (electrodeless) dielectrophoresis particle trapping devices

While cyclo-olefin polymer microchannels have the potential to improve both the optical detection sensitivity and the chemical resistance of polymer microanalytical systems, their surface properties are to date not thoroughly characterized. These surface properties dictate, among other things, electrokinetic effects when electric fields are present. Here, we report the measurement of the zeta potential of cyclo-olefin polymers (injection-molded and hot-embossed Zeonor 1060R and 1020R) microchannels as a function of pH, counter-ion concentration, storage conditions, and chemical treatment in aqueous solutions both with and without EOF-suppressing additives. In contrast with previous reports, significant surface charge is measured, consistent with titration of charged sites with pK(a) = 4.8. Storage in air, acetonitrile, or aqueous solutions has relatively minor effects. While the source of the surface charge is unclear, chemical functionalization has shown that carboxylic acid groups are not present at the surface, consistent with the chemical structure of Zeonor. EOF-suppressing additives (hydroxypropylmethylcellulose) and conditioning in perchloric acid allow the surface charge to be suppressed. We demonstrate dielectrophoretic particle trapping devices in Zeonor 1060R substrates that show reduced trapping voltage thresholds as compared to previous implementations in glass.     

芯片毛细管电泳管道中电渗流的数值模拟

利用芯片毛细管电泳管道中电渗流的数学模型,模拟了正常管道和细管道中十字交叉进样电渗流的性质以及其中样品浓度的分布.模拟的结果与文献报道一致.引人了时间参数,对电渗流以及浓度的分布作了一个含时的考察.同时,提出了通过管道表面修饰改变ζ电势的方法以消除弯道效应.     

Numerical analysis of the thermal effect on electroosmotic flow and electrokinetic mass transport in microchannels

Joule heating is present in electrokinetically driven flow and mass transport in microfluidic systems. Nowadays, there is a trend of replacing costly glass-based microfluidic systems by the disposable, cheap polymer-based microfluidic systems. Due to poor thermal conductivity of polymer materials, the thermal management of the polymer-based microfluidic systems may become a problem. In this study, numerical analysis is presented for transient temperature development due to Joule heating and its effect on the electroosmotic flow (EOF) and mass species transport in microchannels. The proposed model includes the coupling Poisson-Boltzmann (P-B) equation, the modified Navier-Stokes (N-S) equations, the conjugate energy equation, and the mass species transport equation. The results show that the time development for both the electroosmotic flow field and the Joule heating induced temperature field are less than 1 s. The Joule heating induced temperature field is strongly dependent on channel size, electrolyte concentration, and applied electric field strength. The simulations reveal that the presence of the Joule heating can result in significantly different characteristics of the electroosmotic flow and electrokinetic mass transport in microchannels.     

Optimization of resolution in micellar electrokinetic chromatography

A comparison of separations conducted in sodium dodecyl sulfate (SDS) and SDS modified with Brij 35 indicates that selectivity, in Micellar Electrokinetic Chromatography (MEKC), is governed by the composition of the micellar phase. Beyond selectivity optimization, resolution may be improved by increasing efficiency or decreasing electroosmotic flow. Of these approaches, increasing capillary length (to improve efficiency) should be a more time effective means of improving separation.     

Effects of organic mobile phase modifiers in micellar electrokinetic capillary chromatography

The addition of 1–20% (v/v) of methanol or acetonitrile as organic modifier to the mobile phase in a micellar electrokinetic capillary chromatographic (MECC) system, containing sodium dodecyl sulfate and a buffer, is shown to extend the elution range and thus increase the peak capacity of a given system. Although the net change in the elution range parameter, t_o/t_mc, is essentially the same for both modifiers, the acetonitrile-modified system exhibits much faster elution times for the polar and non-polar test solutes employed in this study. Retention, as measured by the capacity factor, is generally decreased with the increase of an organic modifier, just as in conventional reversed phase chromatography. However, changes in selectivity as a function of the added modifiers are noted among polar and non-polar solutes as well. The efficiency of these MECC systems is increased with the addition of either organic modifier.     

Quantification of surface roughness effect on elastically backscattered electrons

Electron inelastic mean free path can be obtained from a measured elastic peak electron spectroscopy spectrum combined with a Monte Carlo simulation. It is thus necessary to know the influence of various experimental factors to the measured and calculated results. This work investigates the effect of the surface roughness or the surface topography on the intensity of the elastic peak. A Monte Carlo simulation, by taking into account of realistic surface roughness for both Gaussian and non‐Gaussian type rough surfaces experimentally prepared, has been employed to study the surface topography effect. The simulations of elastic peak electron spectroscopy were performed for both planar and rough Al and Cu surfaces and for varied primary energies ranging from 200 to 2000 eV. To quantify the surface roughness effect, the surface roughness parameter is introduced according to the ratio of elastic peak intensities between a rough surface and an ideal planar surface. Simulation results have shown that surface roughness parameter is important in a certain range of emission angle and particularly for large emission angles. For grazing emission, the elastic peak intensity can be largely enhanced by roughness even at nanometer scale. Copyright © 2014 John Wiley & Sons, Ltd.     

Simultaneous estimation of zeta potential and slip coefficient in hydrophobic microchannels

Electroosmotic flows through hydrophobic microchannels experience velocity slip at the channel wall, which increases the volumetric flow rate at a given electric potential gradient. The conventional method of zeta potential estimation using the volumetric flow rate may yield quite inaccurate zeta potential unless the velocity slip is appropriately taken care of. In the present investigation we develop a method for simultaneous estimation of zeta potential and velocity slip coefficient in the electroosmotic flow through a hydrophobic microchannel using velocity measurements. The relevant inverse problem is solved through the minimization of a performance function utilizing a conjugate gradient method. The present method is found to estimate the zeta potential and slip coefficient accurately even with noisy velocity measurements.     

Modeling of nucleic acid adsorption on 3D prisms in microchannels

Understanding nucleic acid adsorption in microchannels is critical to improve the efficiency of purifying and extracting nucleic acid (NA) from sample solutions by microfluidic technologies. Using a microchannel with 3D prismatic silica elements on the wall can dramatically increase the surface area-to-volume ratio, and hence facilitate the nucleic acid adsorption on the wall. In this study a theoretical model for modeling adsorption in a microchannel with a designed 3D surface structure was developed, and five dimensionless numbers were found to be the key parameters in the adsorption process. Extensive numerical simulations were conducted. Two flow modes, the electroosmotic flow (EOF) and pressure-driven flow (PDF), were investigated for their effect on the adsorption. It was found that the EOF is more desirable than PDF. The 3D prismatic elements can increases the NA molecule adsorption not only by providing more surface areas, but also by the induced pressure resisting the central bulk electroosmotic flow. Finally, the effects of adsorption kinetic parameters (i.e., the kinetic association/dissociation constants, the diffusion coefficient, the total site density, the loading concentration, and the channel height), on the adsorption process were discussed in detail.     

Analytical treatment of electrokinetic microfluidics in hydrophobic microchannels

Microfluidics in microelectromechanical systems (MEMS) and nanoelectromechanical systems (NEMS) devices is complex due to the large surface area to volume ratio. Thus, surface properties play an important role in flow behavior. In this paper, we summarize the effects of electric double layer and surface hydrophobicity of rectangular microchannels on time-dependent electrokinetic flow. Theoretically, we have shown that flow resistance can, in principal, be significantly reduced so that a larger flow rate can be obtained for pressure-driven flow or electric-field-driven flow. This relies on the ability to change surface charges and surface hydrophobicity independently. Our theoretical results provide guidelines for the design and operation of microfluidic flow in rectangular microchannels. Because of liquid slippage, zeta potential determination by traditional method could be overestimated. Taking into account the effect of hydrophobicity, a modified method is proposed to determine the zeta potential and slip coefficient for parallel-plate microchannels with hydrophobic surfaces.     

异质材料微流体通道电渗流热效应

本文对玻璃和聚二甲基硅氧烷(PDMS)材料制作的微流控芯片电渗流焦耳热效应进行数值研究.采用双电层的Poisson-Boltzmann方程,液体运动的Navier-Stokes方程和液-固耦合系统的热传导方程研究二维微通道电渗流的温度特性.研究发现:由于材料属性的差别,温度场和速度场在微通道断面存在不均匀性.微通道表面的温升会降低双电层的电荷密度.热效应会对电渗流速度场产生影响,并诱导压强梯度和改变外电场在微通道的变化特征.     

Influence of roughness and capillary size on the zeta potential values obtained by streaming potential measurements

Streaming potential measurements are performed to determine the zeta potential of flat surfaces, particles, or fibers. Although the zeta potential is a well-defined property of solid surfaces in a liquid, there are indications that the absolute values of the zeta potential calculated using the Helmholtz-Smoluchowski equation are affected by surface roughness and—in case of particle or fiber assemblies—their packing density. The study at hand investigates these influences using flat polymer surfaces with different roughness and topography and assemblies of basalt spheres. It was found that increasing roughness of the flat surface and larger size or smaller number of particles in particle assemblies result in flatter slopes of the streaming potential versus pressure and thus lower apparent absolute values of the zeta potential. The interpretation of streaming potential measurements should therefore not focus on absolute zeta potential values but on trends in pH- and concentration-dependent measurements.     

Recent advances in direct current electrokinetic manipulation of particles for microfluidic applications

Microfluidic devices have been extensively used to achieve precise transport and placement of a variety of particles for numerous applications. A range of force fields have thus far been demonstrated to control the motion of particles in microchannels. Among them, electric field‐driven particle manipulation may be the most popular and versatile technique because of its general applicability and adaptability as well as the ease of operation and integration into lab‐on‐a‐chip systems. This article is aimed to review the recent advances in direct current (DC) (and as well DC‐biased alternating current) electrokinetic manipulation of particles for microfluidic applications. The electric voltages are applied through electrodes that are positioned into the distant channel‐end reservoirs for a concurrent transport of the suspending fluid and manipulation of the suspended particles. The focus of this review is upon the cross‐stream nonlinear electrokinetic motions of particles in the linear electroosmotic flow of fluids, which enable the diverse control of particle transport in microchannels via the wall‐induced electrical lift and/or the insulating structure‐induced dielectrophoretic force.     

Interactions Between Surface Reactions and Gas-phase Reactions in Catalytic Combustion and Their Influence on Ignition of HCCI Engine

IntroductionThe phenomenon of catalytic combustion was firstdiscovered in 1817 when Humphry Davy observed thatPt wires could promote combustion reactions in flamma-ble mixtures. Since then, considerable efforts havebeen focused on the application of catal…     

Instabilities of the pH gradient in carrier ampholyte-based isoelectric focusing: Elucidation of the contributing electrokinetic processes by computer simulation

Electrokinetic processes that lead to pH gradient instabilities in carrier ampholyte-based IEF are reviewed. In addition to electroosmosis, there are four of electrophoretic nature, namely (i) the stabilizing phase with the plateau phenomenon, (ii) the gradual isotachophoretic loss of carrier ampholytes at the two column ends in presence of electrode solutions, (iii) the inequality of the mobilities of positively and negatively charged species of ampholytes, and (iv) the continuous penetration of carbonate from the catholyte into the focusing column. The impact of these factors to cathodic and anodic drifts was analyzed by simulation of carrier ampholyte-based focusing in closed and open columns. Focusing under realistic conditions within a 5 cm long capillary in which three amphoteric low molecular mass dyes were focused in a pH 3–10 gradient formed by 140 carrier ampholytes was investigated. In open columns, electroosmosis displaces the entire gradient toward the cathode or anode whereas the electrophoretic processes act bidirectionally with a transition around pH 4 (drifts for pI > 4 and pI < 4 typically toward the cathode and anode, respectively). The data illustrate that focused zones of carrier ampholytes have an electrophoretic flux and that dynamic simulation can be effectively used to assess the magnitude of each of the electrokinetic destabilizing factors and the resulting drift for a combination of these effects. Predicted drifts of focused marker dyes are compared to those observed experimentally in a setup with coated capillary and whole column optical imaging.     

Influence of compaction and surface roughness on low‐energy ion scattering signals

Investigation of the surface composition of powders often requires compaction. To study the effect of compaction on surface analysis, samples have been compacted at various pressures ranging from 0 Pa (i.e. no compaction) up to 2000 MPa (2 × 10⁴ kg cm^?2) Low‐energy ion scattering (LEIS) was used to determine the composition of the outermost atomic surface layer. Using scanning electron microscopy, changes in the morphology due to compaction have been detected in the SiO₂ test samples. The LEIS yield of a compacted silica powder is found to be independent of the applied pressure during compaction between 2 MPa and 2000 MPa (2 × 10⁴ kg cm^?2). Analysis of a submonolayer of Ta₂O₅ on a silica support shows that the composition of the outermost atomic layer is not changed after compaction up to a pressure of at least 300 MPa. When compaction is applied, the absolute LEIS yield appears to be independent of the specific surface area of silica supports in the range 50–380 m² g^?1. A minor difference in LEIS signals is observed between compacted silica supports and flat quartz samples. In order to determine the surface roughness factor independently, and to study the material dependence of the surface roughness factor, angle‐dependent LEIS measurements have been carried out on oxidized silicon, gallium and gold surfaces. The results on the oxidized silicon confirm the small influence of surface roughness for silica particles, whereas measurements on the more closely packed metallic gallium and gold surfaces indicate a significant surface roughness effect. Copyright © 2004 John Wiley & Sons, Ltd.     

Influence of the heterogeneous structure on the electrochemical properties of anion exchange membranes

In this study, the influence of the degree of the heterogeneity on the electrochemical behaviors was investigated for commercial anion exchange membranes using three monovalent organic electrolytes with sodium form (acetate, d-gluconate and monovalent citrate), which can be produced from fermentation processes, and an inorganic electrolyte (NaCl). As indicators of the heterogeneity for anion exchange membranes, the fraction of the inter-gel phase and the conducting phase in the membrane structure were considered in this study. Using the isoconductance value of an anion exchange membrane, the diffusion coefficient through the joint-gel phase in the membrane structure showed the sequence of chloride > acetate > gluconate > monovalent citrate. The fraction of the inter-gel phase of the heterogeneous membranes was much higher than that of the homogeneous membranes due to the heterogeneous structure. In addition, the fractions of conducting phase of heterogeneous membranes were estimated as much lower than those of homogeneous membranes. It was shown in the study that the heterogeneous structures affected the electrochemical properties of anion exchange membranes, which were characterized by the chronopotentiometry and the current–voltage relationship.     

The effects of engineering design on heterogeneous biocatalysis in microchannels

The results of a numerical study of the fundamental interactions of engineering design and micromixing on conversion in packed microchannels are presented. Previously, channel-based microreactors made of molded silicon plastic were designed, fabricated, and experimentally tested. These reactors have enzymes immobilized on the channel walls by various methods including layer-by-layer nano self-assembly techniques. They also contain molded packing features to add reactive surface area and to redistribute the fluid. An arbitrary but intuitively sensible packing arrangement was initially chosen and used in experimental studies. The current computer simulation study was undertaken to understand how static laminar mixing affects the conversion efficiency. The reactors previously used experimentally have been simulated using CFD-ACE+multiphysics software (ESI CFD Inc., Huntsville, AL). It is found that packing significantly increases conversion when compared with empty channels over the entire flow rate range of the study (0.25相似文献