Synthesis,structure, and property of a triruthenium cluster having a μ-alkyl ligand: Transformation of a μ3(⊥)-alkyne ligand into a μ-alkyl ligand via a μ3-vinylidene complex

A triruthenium μ-alkyl complex, (Cp¹Ru)₃(μ-η²-HCHCH₂R)(μ-CO)₂(μ₃- CO) (2a, R = Ph; 2b, R = ^tBu, Cp¹ = η⁵-C₅Me₅), which contains a two-electron and three-center interaction among Ru, C, and H atoms, has been synthesized by the reaction of a perpendicularly coordinated 1-alkyne complex, {Cp¹Ru(μ-H)}₃(μ₃-η²:η²(⊥)-RCCH) (1a; R = Ph, 1b; R = ^tBu), with carbon monoxide. A diffraction study for 2b clearly represented the bridging neohexyl group on one Ru–Ru edge. This μ-alkyl group exhibited dynamic behavior resulting in site-exchange of the α-hydrogen atoms between the terminal and bridging positions, which was synchronized with the migration of the μ-alkyl groups between the two ruthenium atoms. The agostic C–H bond was readily cleaved upon pyrolysis. Whereas the μ-phenethylidene intermediate resulting from the σ-C–H bond cleavage has never been observed, a μ₃-phenethylidyne complex, {Cp¹Ru(μ-CO)}₃(μ₃-CCH₂Ph) (7a), and a μ₃-methylidyne complex, {Cp¹Ru(μ-CO)}₃(μ₃-CH) (8), were obtained by the successive C–H/C–H and C–H/C–C bond cleavages at the μ-alkyl moiety, respectively.     

Versatile binding properties of di-pyridyl ligands with Cu(II) complexes: The syntheses,structural characterization and thermal analysis of six new species

A novel series of 4,4′-bipyridine- and 1,2-bis(4-pyridyl)ethane-Cu(II) complexes were synthesized using a variety of amine ligands (DPA = di(2-pyridylmethyl)amine, Medpt = 3,3′-diamino-N-methyldipropylamine, Hbpca = bis(2-pyridylcarbonyl)amine, TPA = tris(2-pyridylmethyl)amine) and cyclen = 1,4,7,10-tetraazacyclododecane). Different complexes were obtained including mononuclear [Cu(cyclen)(4,4′-bipy)](ClO₄)₂ (1), dinuclear {[Cu(μ₂-bpca)(4,4′-bipy)(H₂O)]ClO₄}₂ (2), [Cu₂(DPA)₂(μ₂-4,4′-bipy)(ClO₄)₄)]·H₂O (3), [Cu₂(cyclen)₂(μ₂-bpe)](ClO₄)₄ (4) and [Cu₂(TPA)₂(μ₂-bpe)](ClO₄)₄ (5) and the 1-D polymer, {[Cu(Medpt)(μ₂-4,4′-bipy)](ClO₄)₂}_n (6). In the 1–6 samples, cooling up to 100 K produces only the expected, minor, changes in cell constants given no space group changes. Therefore, data for the 100 K structures are reported only. Single-crystal X-ray crystallography reveals the monodentate coordination of the 4,4′-bipy in 1 and 2, and the bridged nature of the di-pyridyl ligands in the dinuclear complexes 2–5 and in the polymeric complex 6. In this series, structures 3–6 consist of the 4,4′-bipy or bpe bridging the two Cu(II) centers, the coordination by the tri- or the tetra-N donors of the amine, and the ClO₄^? groups as counter ions in 4–6 complexes. In the complexes 3–6, the Cu···Cu distances across the bridged di-pyridyl ligands were found to be greater than 11 Å. The magnetic properties of complex 3 reveal no evidence for magnetic coupling between the two Cu(II) centers (J = ?0.58 cm^?1).     

Tuning the electronic properties of Fe2(μ-arenedithiolate)(CO)6−n(PMe3)n (n = 0, 2) complexes related to the [Fe–Fe]-hydrogenase active site

Complexes [Fe₂(μ-S₂Ar)(CO)₆] (S₂Ar) = benzene-1,2-dithiolate (1a) toluene-3,4-dithiolate (2a), 3,6-dichloro-1,2-benzenedithiolate (3a), quinoxaline-2,3-dithiolate (7a) have been prepared to investigate the electronic effect that different bridging arenedithiolate ligands have on the appended Fe₂(CO)₆ sites. Dinuclear complexes [Fe₂(μ-S₂Ar)(CO)₄(PMe₃)₂] (1–3,7)b and mononuclear complexes [Fe(S₂Ar)(CO)₂(PMe₃)₂] (1–3,7)c were synthesized from their parent hexacarbonyl complexes (1–3,7)a. IR spectroscopic, crystallographic and electrochemical analyses show that an increase of the electron-withdrawing character (where quinoxaline-2,3-dithiolate > 3,6-dichloro-1,2-benzenedithiolate > 1,2-benzenedithiolate ≥ toluene-3,4-dithiolate) of the bridging ligand leads to a decreased electron density at the iron centers, which yield a milder reduction potential and higher eCO stretching frequencies. This effect is coherent for all of the investigated complexes. Electrocatalytic proton reduction by complex 3a (with trifluoromethanesulfonic acid) was evidenced by cyclic voltammetry. As a result of the milder reduction potential of 3a itself, proton reduction that is promoted by 3a proceeds at a potential that is milder than that for the 1a-catalyzed process.     

Syntheses,crystal structures and properties of dinuclear copper(I) complexes

Two dinuclear molecule-bridged Cu(I) complexes, (μ-bpym)[Cu(PPh₃)Cl]₂ (1), [(μ-bpym)(CuL)₂](ClO₄)₂·(CH₃CN)₂(H₂O) (2) (bpym = 2,2′-bipyrimidine, L = (R)-(+)-2,2′-bis(diphenylphospho)-1,1′-dinaphthalene) have been synthesized and characterized. The molecular structures of the two new dinuclear compounds exhibit bridging of two copper(I) centers by the symmetrically bis-chelating bpym ligand. Intriguingly, compound 1 features a remarkable “intramolecular organic sandwich” configuration where the central 2,2′-bipyrimidine bridging ligand interacts in π/π/π fashion with two phenyl rings from the coligands above and below the central plane, while chiral compound 2 exhibits second-order nonlinear optical effect and temperature-dependent luminescence. Upon decreasing the temperature from 298 to 10 K, compound 2 shows a red light emission.     

Activation of C–H and H–H bonds by dinuclear iridium complexes. Oxidative addition to highly active unsaturated 32e− diiridium species

Reactions of [(Cp¹Ir)₂(μ-dmpm)(μ-H)₂][OTf]₂ (1) with NaO^tBu in aromatic solvent at room temperature give [(Cp¹Ir)(H)(μ-dmpm)(μ-H)(Cp¹Ir)(Ar)][OTf] [Ar = Ph (3), p-Tol (4a), m-Tol (4b), 2-furyl (5a), 3-furyl (5b)] via intermolecular aromatic C–H activation. Treatment of [(Cp¹Ir)₂(μ-dppm)(μ-H)₂][OTf]₂ (2) with weak base (Et₂NH) results in intramolecular C–H activation of a phenyl group in the dppm ligand to give [(Cp¹Ir)(H){μ-PPh(C₆H₄)CH₂PPh₂}(μ-H)(Cp¹Ir)][OTf] (6). Reaction of 1 with NaO^tBu in tetrahydrofuran under H₂ (1 atm) results in activation of the H–H bond to give [{(Cp¹Ir)(H)}₂(μ-dmpm)(μ-H)][OTf] (7). Reaction of 1 with NaO^tBu in dichloromethane under carbon monoxide (1 atm) gives a carbonyl-bridged Ir^II–Ir^II complex, [(Cp¹Ir)₂(μ-dmpm)(μ-H)(μ-CO)][OTf] (8-OTf). These results strongly suggest that the active species in C–H and H–H bond activation starting with 1 and 2 would be unsaturated 32e^? diiridium species. The structures of 3, 5a, 6, 7, and 8-BPh₄ have been determined by X-ray diffraction methods.     

Versatile Ru-based metathesis catalysts designed for both homogeneous and heterogeneous processes

The synthesis of new ruthenium-based catalysts applicable for both homogeneous and heterogeneous metathesis is described. Starting from the Hoveyda-Grubbs first generation (1) and the Hoveyda-Grubbs second generation (2) catalysts the homogeneous catalysts [RuCl((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(SIMes)] (4: R = Et, R′ = H; 5: R = R′ = Me) (SIMes = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) were prepared by substitution of one chloride ligand with trialkoxysilyl functionalized silver carboxylates (RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COOAg (3a: R = Et, R′ = H; 3b: R = R′ = Me). These homogeneous ruthenium-species are among a few known examples with mixed anionic ligands. Exchange of both chloride ligands afforded the catalysts [Ru((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(SIMes)] (9: R = Et, R′ = H; 11: R = R′ = Me) and [Ru((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(PCy₃)] (8: R = Et, R′ = H; 10: R = R′ = Me). The reactivity of the new complexes was tested in homogeneous ring-closing metathesis (RCM) of N,N-diallyl-p-toluenesulfonamide and TONs of up to 5000 were achieved. Heterogeneous catalysts were obtained by reaction of 4, 5 and 8–11 with silica gel (SG-60). The resultant supported catalysts 4a, 5a, 8a–11a showed reduced activity compared to their homogenous analogues, but rival the activity of similar heterogeneous systems.     

Synthesis,characterization and property study of new coordination polymers constructed from flexible dicarboxylates and bidentate nitrogen mixed ligands

Five new coordination polymers, [Cd(1,2′-cy)_0.5(bix)H₂O]_n (1), [Cd₂(1,2′-cy)₂(1,10′-phen)₂(H₂O)₂] (2), {[Co(1,2-cy)(2,2′-bipy)(H₂O)₂]·2H₂O}_n (3) {[Cd(succ)(1,10′-phen)H₂O]·H₂O}_n (4), and {[Cd(succ)(2,2′-bipy)H₂O]·2H₂O}_n (5) (1,2-cy = 4-cyclohexene-1,2-dicarboxylate, succ = succinic acid, bix = 1,4-bis(imidazol-1-ylmethyl)benzene, 1,10′-phen = 1,10-phenanthroline, 2,2′-bipy = 2,2′-bipyridine), have been synthesized and characterized by single-crystallographic X-ray diffraction. Complex 1 shows a two-dimensional covalent layer structure. Complex 2 exhibits a two-dimensional supramolecular layer network composed from discrete fundamental units. Complex 3 exhibits a one-dimensional covalent chain-like structure, which further extends to a two-dimensional supramolecular structure with hydrogen bonding and π-π interactions respectively. Complexes 4 and 5 show three-dimensional supramolecular networks composed from one-dimensional chain-like covalent structures. Furthermore, the magnetic property of complex 3 and fluorescent properties of complexes 1, 2, 4 and 5 have also been studied.     

Dialkyl- and diaryl-platinum(II) complexes with secondary phosphines: Preparation,structure and thermal reaction giving the metallopolymer

Alkyl and arylplatinum complexes with 1,5-cyclooctadiene ligand, [PtR₂(cod)] (R = Me, Ph, C₆H₄-p-CF₃, C₆F₅), react with secondary phosphines, PHR′₂ (R′ = i-Bu, t-Bu, Ph), to afford the mononuclear platinum complexes, cis-[PtR₂(PHR′₂)₂] (1a: R = Me, R′ = i-Bu; 1b: R = Me, R′ = t-Bu; 1c: R = Me, R′ = Ph; 2a: R = Ph, R′ = i-Bu; 2b: R = Ph, R′ = t-Bu; 2c: R = R′ = Ph; 3a: R = C₆H₄-p-CF₃, R′ = i-Bu; 3b: R = C₆H₄-p-CF₃, R′ = t-Bu; 3c: R = C₆H₄-p-CF₃, R′ = Ph; 4a: R = C₆F₅, R′ = i-Bu; 4c: R = C₆F₅, R′ = Ph) in 81–98% yields. Molecular structures of the complexes except for 1a, 1c and 2a were determined by X-ray crystallography. Complex 1b has a square-planar structure with Pt–C(methyl) bonds of 2.083(8) and 2.109(8) Å, while the Pt–C(aryl) bonds of 2b–c, 3a–c, 4a and 4c (2.055(1)–2.073(8) Å) are shorter than them. Thermal decomposition of 1b, 2a–c, and 3a–c releases methane, biphenyl or 4,4′-bis(trifluoromethyl)biphenyl as the organic products, which are characterized by NMR spectroscopy. The solid product of the thermal reactions of 2b and 2c were characterized as the metallopolymers formulated as [Pt(PR′₂)₂]_n (5b: R′ = ^tBu; 5c: R′ = Ph), based on the solid-state NMR and elemental analyses.     

Diiron chelate complexes relevant to the active site of the iron-only hydrogenase

A novel unsymmetrically disubstituted propanedithiolate compound [Fe₂(CO)₄(κ²-dmpe)(μ-pdt)] (1) (pdt = SCH₂CH₂CH₂S, dmpe = Me₂PCH₂CH₂PMe₂) was synthesized by treatment of [Fe₂(CO)₆(μ-pdt)] with dmpe in refluxing THF. Compound 1 was characterized by single-crystal X-ray diffraction analysis. Protonation of 1 with HBF₄·Et₂O in CH₂Cl₂ gave at room temperature the μ-hydrido derivative [Fe₂(CO)₄(κ²-dmpe)(μ-pdt)(μ-H)](BF₄)] (2). At low temperature, ¹H and ³¹P–{¹H} NMR monitoring revealed the formation of a terminal hydride intermediate 3. Comparison of these results with those of a VT NMR study of the protonation of symmetrical compounds [Fe₂(CO)₄L₂(μ-pdt)] [L = PMe₃, P(OMe)₃] suggests that in disubstituted bimetallic complexes [Fe₂(CO)₄L₂(μ-pdt)], dissymmetry of the complex is required to observe terminal hydride species. Attempts to extend the series of chelate compounds [Fe₂(CO)₄(κ²-L₂)(μ-pdt)] by using arphos (arphos = Ph₂AsCH₂CH₂PPh₂) were unsuccessful. Only mono- and disubstituted derivatives [Fe₂(CO)_6−n(Ph₂AsCH₂CH₂PPh₂)_n(μ-pdt)] (n = 1, 4a; n = 2, 4b), featuring dangling arphos, were isolated under the same reaction conditions of formation of 1. Compound 4b was structurally characterized.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Palladium(II) complexes with the new P,N-type ligand (2-oxazoline-2-ylmethyl)di-isopropylphosphine as intermediates in CO/ethylene or CO/methyl acrylate insertion

The ligand (i-Pr)₂PCH₂(oxazoline) (1a), of the P,N-donor type, was reacted with [PdMeCl(COD)] to yield the square planar methylpalladium(II) complex [PdClMe(P,N)] (P,N = 1a) (2a), from which the complex [PdMe(P,N)OTf] (OTf = OSO₂CF₃) (3a) was obtained by AgOTf-promoted chloride abstraction. The alkyl complexes

(P,N = 1a) (5a, R = H; 7a, R = C(O)OMe) have been isolated from the initial CO/ethylene or CO/methyl acrylate insertion steps into the Pd–Me bond of 3a, respectively, and spectroscopically characterized. Complexes 2a, 3a and 7a have been fully characterized by single crystal X-ray diffraction. Complex 7a is still a rare example of a structurally characterized CO/methyl acrylate stepwise insertion product. These complexes are relevant to the alternating copolymerization of olefins and carbon monoxide catalyzed by palladium complexes. In addition, the centrosymmetric dinuclear complex trans-[Pd(μ-Cl){(i-Pr)₂PCH₂(oxazoline)}]₂(OTf)₂ (6) has been obtained and characterized by X-ray diffraction; it appears to be the first dinuclear complex of the type [Pd(μ-Cl)(P,N)]₂ to be characterized by X-ray crystallography.

Résumé

Le ligand (i-Pr)₂PCH₂(oxazoline) (1a), de type donneur P,N, réagit avec [PdClMe(COD)] pour former le complexe plan carré méthylpalladium(II) [PdClMe(P,N)] (P,N = 1a) (2a), à partir duquel le complexe [PdMe(P,N)OTf] (OTf = OSO₂CF₃) (3a) a été obtenu par abstraction de chlorure à l'aide de AgOTf. Les complexes alkyles

(P,N = 1a) (5a, R = H; 7a, R = C(O)OMe), ont été isolés lors des premières étapes d'insertion de CO/éthylène ou de CO/acrylate de méthyle, respectivement, dans la liaison Pd–Me de 3a, et caractérisés par méthodes spectroscopiques. Les complexes 2a, 3a et 7a ont été complètement caractérisés par diffraction des rayons X sur monocristal. Le complexe 7a est un exemple encore rare de produit d'insertion par étapes de CO/acrylate de méthyle qui ait été caractérisé structuralement. Ces complexes sont pertinents pour la copolymérisation alternée d'oléfines et de monoxyde de carbone catalysée par les complexes du palladium. En outre, le complexe dinucléaire centrosymétrique trans-[Pd(μ-Cl){(i-Pr)₂PCH₂(oxazoline)}]₂(OTf)₂ (6) a été obtenu et caractérisé par diffraction des rayons X; il s'agit du premier complexe dinucléaire de type [Pd(μ-Cl)(P,N)]₂ à être caractérisé par diffraction des rayons X.     

Reaction of isocyanides with iminophosphorane-based carbene ligands: Synthesis of unprecedented ketenimine–ruthenium complexes

The RuC bond of the bis(iminophosphorano)methandiide-based ruthenium(II) carbene complexes [Ru(η⁶-p-cymene)(κ²-C,N-C[P{NP(O)(OR)₂}Ph₂]₂)] (R = Et (1), Ph (2)) undergoes a C–C coupling process with isocyanides to afford ketenimine derivatives [Ru(η⁶-p-cymene)(κ³-C,C,N-C(CNR′)[P{NP(O)(OR)₂}Ph₂]₂)] (R = Et, R′ = Bz (3a), 2,6-C₆H₃Me₂ (3b), Cy (3c); R = Ph, R′ = Bz (4a), 2,6-C₆H₃Me₂ (4b), Cy (4c)). Compounds 3–4a–c represent the first examples of ketenimine–ruthenium complexes reported to date. Protonation of 3–4a with HBF₄ · Et₂O takes place selectively at the ketenimine nitrogen atom yielding the cationic derivatives [Ru(η⁶-p-cymene)(κ³-C,C,N-C(CNHBz)[P{NP(O)(OR)₂}Ph₂]₂)][BF₄] (R = Et (5a), Ph (6a)).     

Effect of intraligand π-delocalization on the photophysical properties of two new Ru(II) complexes

Two new Ru(II) complexes, [Ru(bpy)₂(1-COO-iqu)]⁺ (2; bpy = 2,2′-bipyridine, 1-COO-iqu^? = isoquinoline-1-carboxylate) and [Ru(bpy)₂(3-COO-iqu)]⁺ (3; 3-COO-iqu^? = isoquinoline-3-carboxylate), were prepared and their crystal structures solved. The ground and excited state properties of 2 and 3 were characterized and compared to those of [Ru(bpy)₃]²⁺ (1). The presence of the oxygen atom in the Ru(II) coordination sphere makes 2 and 3 easier to oxidize than 1. The Ru → bpy MLCT absorption and emission of 2 and 3 are red-shifted relative to that of 1 in CH₂Cl₂, and the E₀₀ energies were estimated to be 1.89 eV and 1.95 eV from the low temperature emission of 2 and 3, resulting in excited state oxidation potentials of ?1.03 V and ?1.10 V vs SCE, respectively. In addition to the short-lived emissive ³MLCT state, a long-lived species is observed in the transient absorption of 3 in DMSO (τ = 49 μs) and pyridine (τ = 44 μs), assigned to a solvent-coordinated complex. This intermediate is not observed for 3 in non-polar solvents or for 2. The absence of the solvent coordinated intermediate in 2 is explained by the stronger Ru–O bond afforded by the lower conjugation in that extends onto the carboxylic acid in the 1-COO-iquo^?ligand, compared to that in the 3-COO-iqu^?ligand in 3. Transient absorption experiments also show that the ³MLCT excited state of 3 is able to reduce methyl viologen.     

Synthesis,structure and characterization of new 1D and 2D Ni(II) coordination polymers

Two new Ni(II) coordination polymers, namely [Ni₃(Hsdac)₂(sdac)₂(2,2′-bipy)₂] (1) and [Ni₂(sdac)₂(4,4′-bipy)₂]·2H₂O (2) (sdba = 4,4′-sulfonyldibenzoate, 2,2′-bipy = 2,2′-bipyridine, 4,4′-bipy = 4,4′-bipyridine), have been prepared under hydrothermal conditions and characterized by single crystal X-ray diffraction analyses. Compound 1 possesses an interesting chain structure. Adjacent chains are further linked through H-bond interactions between Hsdac ligands to give a two-dimensional (2D) supramolecular architecture. Compound 2 displays an unusual 2D polyrotaxane-like network.     

Protophilicity,electrochemical property,and desulfurization of diiron dithiolate complexes containing a functionalized C2 bridge with two vicinal basic sites

Two diiron dithiolate complexes [{μ-SC(NBn)CH(NHBn)S-μ}Fe₂(CO)₅L] (L = PPh₃, 2; P(Pyr)₃, 3) containing a functionalized C₂ bridge with two vicinal basic sites were prepared and characterized as models of the FeFe-hydrogenase active site. The molecular structures of 2 and its N-protonated form [(2H_N)(OTf)] were determined by X-ray analyses of single crystals. In the solid state of [(2H_N)(OTf)]. Each asymmetric unit contains a molecule of [(2H_N)(OTf)] and a molecule of water. The molecule of water is close to the iron atom of the [Fe(CO)₃] unit (Fe···O(H₂O), 4.199 Å). The complexes 2 and 3 are relatively protophilic. ³¹P NMR spectra and cyclic voltammograms show that they can be protonated by the mild acids CCl₃COOH and CF₃COOH. Electrochemical studies show that the first reduction peak of 3 at ?1.51 V versus Fc⁺/Fc is 110 mV more positive than that (?1.62 V) found for the analogous diiron azadithiolate complex [{(μ-SCH₂)₂N(CH₂C₆H₅)}Fe₂(CO)₅P(Pyr)₃] (7). Protonation of 2 and 3 leads to the anodic shifts of 610–650 mV for the Fe^IFe^I/Fe^IFe⁰ reduction potentials. The shifts are apparently larger than that (450 mV) for protonation of 7. The reaction of the all-carbonyl complex [{μ-SC(NBn)CH(NHBn)S-μ}Fe₂(CO)₅L] with two equivalents of bis(diphenylphosphino)methane (dppm) in refluxing toluene affords a desulfurized complex [(μ-S)(μ-dppm)₂Fe₂(CO)₄] (6). The reaction process was studied. A dppm mono-dentate intermediate [{μ-SC(NBn)CH(NHBn)S-μ}Fe₂(CO)₅(κ¹-dppm)] (4) and a dppm μ-bridging species [{μ-SC(NBn)CH(NHBn)S-μ}Fe₂(CO)₄(μ-dppm)] (5) have been isolated and spectroscopically characterized.     

Synthesis and structures of N,N,O-scorpionatoruthenium(II) complexes featuring “non-innocent” o-benzoquinonediimines

A series of ruthenium(II) complexes bearing redox-active o-benzoquinonediimines (o-bqdi) was synthesized and characterized. Reactions of [RuCl(bdmpza)(η⁴-cod)] (bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetato; cod = 1,5-cyclooctadiene) and 1,2-benzenediamines such as o-phenylenediamine (o-pdaH₂), 4,5-difluoro-1,2-benzenediamine (o-pdaF₂), 4,5-dichloro-1,2-benzenediamine (o-pdaCl₂), and 4,5-dimethoxy-1,2-benzenediamine (o-pda(OMe)₂) afforded [RuCl(bdmpza)(o-bqdiX₂)] (X = H, 1; X = F, 2; X = Cl, 3; X = OMe, 4).     

Synthesis,characterization, and study of the photophysics and photocatalytic properties of the photoinitiated electron collector [{(phen)2Ru(dpp)}2RhBr2](PF6)5

The heterometallic photoinitiated electron collector [{(phen)₂Ru(dpp)}₂RhBr₂](PF₆)₅ (phen = 1,10-phenanthroline, dpp = 2,3-bis(2-pyridyl)pyrazine) has been synthesized and studied by spectroscopic, photophysical, electrochemical, and photochemical techniques. Substitution of chloride with bromide in the previously reported [{(phen)₂Ru(dpp)}₂RhCl₂](PF₆)₅ complex presents a new photoinitiated electron collector which can assist in understanding the functioning of our supramolecular systems [{(TL)₂Ru(BL)}₂RhX₂](PF₆)₅ (TL = terminal ligand, BL = bridging ligand, X = halide) in the photoinitiated electron collection and generation of hydrogen through the reduction of water and a detailed comparison is presented. Both the bromide and chloride analogues of these supramolecular complexes contain low energy, emissive metal-to-ligand charge transfer (³MLCT) excited states that populate lower lying metal-to-metal charge transfer (³MMCT) excited states. The electrochemistry of these complexes showed an impact on the reduction of the central Rh^III upon halide substitution with the bromide analogue [(phen)₂Ru(dpp)}₂RhBr₂](PF₆)₅ having a slightly lower reduction potential than the corresponding chloride counterpart. The more positive reduction of Rh^III to generate the Rh^I species in the bromide analogue impacts the photocatalytic properties upon photolysis in the presence of a sacrificial electron donor. The trimetallic complex [{(phen)₂Ru(dpp)}₂RhBr₂](PF₆)₅ generates hydrogen through the reduction of water with higher yields than the chloride [{(phen)₂Ru(dpp)}₂RhCl₂](PF₆)₅ analogue under the same conditions. Despite the longer lived ³MLCT state of both [(TL)₂Ru(dpp)]²⁺ and [{(TL)₂Ru}₂(dpp)]⁴⁺ when TL = phen vs. bpy (bpy = 2,2′-bipyridine), the phen trimetallics with X = Cl^? or Br^? do not display longer lived ³MLCT states and show lower H₂ yields than the analogous bpy trimetallic systems.     

Synthesis of heteronuclear (MoRu2) clusters from 16-electron half-sandwich complexes (p-Cymene)Ru[E2C2(B10H10)] (E = S,Se)

The heterometallic cluster complexes {(p-Cymene)Ru[S₂C₂(B₁₀H₁₀)]}Mo(CO)₂{(CO)₃Ru[S₂C₂(B₁₀H₁₀)]} (2) and {(p-Cymene)Ru[Se₂C₂(B₁₀H₁₀)]}₂Mo(CO)₂ (3) (p-Cymene = η⁶-4-isopropyl-toluene) have been synthesized from the reactions of 16-electron half-sandwich ruthenium 1,2-dichalcogenolate carborane complexes (p-Cymene)Ru[E₂C₂(B₁₀H₁₀)] (E = S(1a), Se(1b)) with Mo(CO)₃(Py)₃ in the presence of BF₃ · Et₂O. The complexes of 2 and 3 were characterized by elemental analysis and IR, NMR spectra. The molecular structure of 2 has been characterized by single-crystal X-ray diffraction analysis. Complex 2 is unsymmetrical and the two Ru–Mo single bonds (2.7893(14), 2.8189(13) Å) are each supported by a symmetrically bridging o-carborane-1,2-dithiolato ligand.     

Copper(II)-methylmalonate complexes with unidentate N-donor ligands: Syntheses,structural characterization and magnetic properties

Two new methylmalonate-bridged copper(II) complexes with the formulas [Cu(3-Ipy)(Memal)(H₂O)] (1) and [Cu(2,4′-bpy)(Memal)(H₂O)] · 3H₂O (2) [Memal = methylmalonate dianion, 3-Ipy = 3-iodopyridine, 2,4′-bpy = 2,4′-bipyridine] have been synthesized and characterized by X-ray diffraction. Both compounds crystallize in the monoclinic space group P2₁/n and Z = 4, with unit cell parameters a = 8.5874(13) Å, b = 7.1738(14) Å, c = 19.093(5) Å, β = 99.509(15)° in 1 and a = 17.375(4) Å, b = 7.3305(14) Å, c = 14.247(3) Å, β = 111.409(15)° in 2. The structures of 1 and 2 consist of zigzag chains of anti-syn carboxylate-bridged copper(II) ions running along the b direction. The pyridine-like ligands occupy one equatorial position of the copper environment avoiding the formation of the sheet-like arrangement observed in previously reported Memal complexes. The chains are grouped together in hydrophilic layers through hydrogen bonds and the layers are pillared through the 3-Ipy (1) and 2,4′-bpy (2) ligands which are stacked through π–π interactions involving alternatively aromatic ligands from two adjacent chains. Magnetic susceptibility measurements of both compounds in the temperature range 2–290 K show the occurrence of intrachain ferromagnetic interactions between the copper(II) ions [J = +2.66(2) cm^?1 (1) and J = +2.62(2) cm^?1 (2)].     

Synthesis and properties of alkylruthenium complexes bearing primary and secondary amine ligands

A series of 18-electron alkylruthenium complexes, RuR[κ²(N,N′)-(S,S)-R′SO₂NCHPhCHPhNH₂](η⁶-arene) (Ph = C₆H₅, R′ = p-CH₃C₆H₄ and CH₃), bearing a N-sulfonylated diamine ligand was synthesized from the reaction of RuCl[κ²(N, N′)-(S,S)-R′SO₂NCHPhCHPhNH₂](η⁶-arene) with alkylzinc reagents, in which transmetalation proceeded smoothly to give the desired alkyl complexes in good yield and selectivity. Although the isolable amine Ru complexes bearing functionalized alkyl ligands were thermally stable, the simple methyl and ethyl Ru complexes underwent intramolecular deprotonation from NH protons to give the amido Ru complexes with release of the alkanes. The reactivity of the alkyl Ru complexes is highly affected by the structures of the arene ligands.