A phase stable short pulse generator using a DPMZM and phase modulators for application in 160 GBaud DQPSK systems

A method of 40 GHz phase stable short pulses generation is experimentally demonstrated. It is based on a dual parallel Mach–Zehnder modulator (DPMZM) driven by only one electrical sinusoidal clock and two cascaded phase modulators. The generated pulses are characterized with full-width-at-half-maximum pulse width of 1.9 ps, extinction ratio of 27 dB, timing jitter of 36 fs and signal to noise ratio over 30 dB. The high quality and phase stability of the pulses are further experimentally verified in a 4 × 40 GBaud differential quadrature phase shift keying (DQPSK) optical-time-division-multiplexing (OTDM) system.     

A novel method for chromatic-dispersion monitoring

A novel method for chromatic-dispersion monitoring based on PM–AM conversion is presented. A nonlinear element (NLE) was used as phase-modulator to improve the monitoring performance. The method was investigated numerically and experimentally for 40-Gbit/s signals in NRZ/RZ and CSRZ formats. The monitoring range was enlarged to 1670 ps/nm, and the monitoring sensitivity was improved to 0.012 dB/(ps/nm) for the NRZ signal. The corresponding values for the RZ50 signal were 680 ps/nm and 0.0046 dB/(ps/nm), respectively, and, for the CSRZ signal, 620 ps/nm and 0.0092 dB/(ps/nm), respectively.     

Coupled frequency-doubling optoelectronic oscillator based on polarization modulation and polarization multiplexing

A coupled frequency-doubling optoelectronic oscillator (OEO) is proposed and experimentally demonstrated, which is constructed based on the perfect combination of polarization modulation and polarization multiplexing. A fundamental microwave signal at 9.95 GHz or a frequency-doubled microwave signal at 19.9 GHz is generated with a wavelength-independent sidemode-suppression ratio (SMSR) as high as 78 dB obtained. The phase noise of the generated 19.9-GHz signal is ? 103.45 dBc/Hz at 10-kHz frequency offset, indicating a good short-term stability. The proposed scheme is simple and flexible, which can find applications in radars and wireless communications.     

Normal incidence sound transmission loss in impedance tube – Measurement and prediction methods using perforated plates

For the determination of the transmission loss of samples in an impedance tube, two different approaches is found in the literature, one based on determining the full transfer matrix (TM method) of the acoustic element, the other based on the wavefield decomposition theory (WD method). In this paper both methods are implemented and measured results are compared using samples which includes different types of perforated plates, also combined with porous material. Measurements are conducted in a tube of square cross section with dimensions 200 × 200 mm, thereby limiting the workable frequency range upwards to approximately 850 Hz. The main purpose of the paper is, however, to compare measured results with predictions using the transfer matrix method. For a bare plate with cylindrical apertures two models are compared as well; a “classical” one and another based on modeling the perforated plate as a porous material having a rigid frame. As for these transmission loss measurements, the two measurement approaches turn out to give identical results within the numerical accuracy. The fit between measured and predicted results are reasonably good with a maximum deviation mostly within 2 dB.     

High LO-to-RF isolation 94 GHz coplanar monolithic down-converter for FMCW radar sensor applications

This paper presents a 94 GHz monolithic down-converter with low conversion loss and high local oscillator (LO)-to-RF isolation using the 0.1 μm T-gate metamorphic high electron-mobility transistor (MHEMT) technology. The down-converter consists of a one-stage amplifier and a single-balanced mixer based on the high-directivity tandem coupler structure using the air-bridge crossovers, thereby amplifying the RF signals and maximizing the LO-to-RF isolation by using an inherent S₁₂ isolation characteristic of the amplifier and good phase balance of the tandem coupler. The fabricated one-stage amplifier using a 30 μm × 2 MHEMT shows a small signal gain of 7 dB at 94 GHz. The single-balanced mixer comprising two 20 μm × 2 MHEMT Schottky diodes and the tandem coupler with an additional λ/4-length line exhibits the conversion loss less than 7.8 dB and the LO-to-RF isolation higher than 30 dB in a RF frequency range of 91–96 GHz. Two circuits designed both for a 50 Ω impedance system are integrated into the down-converter of a 2.6 × 2.5 mm² chip size, and it shows a low conversion loss of ∼1 dB at 94 GHz and excellent LO-to-RF isolation above 40 dB in a frequency range of 90–100 GHz. This is the best isolation among the W-band monolithic down-converters reported to date.     

Fabrication and characterization on an organic/inorganic 2 × 2 Mach–Zehnder interferometer thermo-optic switch

An organic/inorganic hybrid 2 × 2 directional coupler (DC) Mach–Zehnder interferometer (MZI) thermo-optic (TO) switch was successfully designed and fabricated using simple direct ultraviolet photolithography process. The hybrid organic/inorganic waveguide structure includes poly-methyl-methacrylate-glycidyl-methacrylate (P(MMA-GMA)), SU-8 2005 and silica as core, upper cladding and under cladding, respectively. Device optimization and simulation were performed to decrease radiation loss and leakage loss, quicken response time and cut down power consumption. Measurements of the fabricated devices at 1550 nm wavelength result in a switching power of 7.2 mW, a response time of ∼100 μs, and crosstalk of −22.8 and −26.5 dB under cross state and bar state, respectively. Besides, the driving-noise-tolerance characteristics of this device were experimentally investigated by directly imposing a generated tunable noise on the pure driving signal (4 V_pp) and the minimum extinction ratio is larger than 18 dB under a noise level of 2.5 V_pp. The effect of noise on extinction ratio was found decreased with the increase of noise frequency.     

56 dB Gain EYDFA with improved noise figure with dual-stage partial double pass configuration

An efficient erbium/ytterbium co-doped fiber amplifier (EYDFA) is demonstrated by using a dual-stage partial double pass structure with a band pass filter (BPF). The amplifier achieves the maximum small signal gain of 56 dB and the corresponding noise figure of 4.66 dB at 1536 nm with an input signal power and total pump power of ?50 dBm and 140 mW, respectively. Compared with a conventional single-stage amplifier, the maximum gain enhancement of 16.99 dB is obtained at 1544 nm with the corresponding noise figure is improved by 2 dB. The proposed amplifier structure only uses a single pump source with a partial double pass scheme to provide a high gain and dual-stage structure to provide the low noise figure.     

Numerical analysis of a direct UV-written 1 × 8 double smooth octagon microrings resonant wavelength demulti/multiplexer

A microring resonant wavelength demulti/multiplexer (MRRWDM) based on UV-written technology is designed. By using a double smooth octagon microrings structure, a 1 × 8 device around the central wavelength of 1550.918 nm with the wavelength spacing of 1.4 nm is presented. Analytical results based on coupled mode theory show that the 3 dB bandwidth is about 0.22 nm, the insertion loss is less than 0.7 dB, and the crosstalk is below ?47 dB for every output channel of the designed device without tolerances.     

Low loss propagation in slow light photonic crystal waveguides at group indices up to 60

We have designed slow light photonic crystal waveguides operating in a low loss and constant dispersion window of Δλ = 2 nm around λ = 1565 nm with a group index of n_g = 60. We experimentally demonstrate a relatively low propagation loss, of 130 dB/cm, for waveguides up to 800 μm in length. This result is particularly remarkable given that the waveguides were written on an electron-beam lithography tool with a writefield of 100 μm that exhibits stitching errors of typically 10–50 nm. We reduced the impact of these stitching errors by introducing “slow–fast–slow” mode conversion interfaces and show that these interfaces reduce the loss from 320 dB/cm to 130 dB/cm at n_g = 60. This significant improvement highlights the importance of the slow–fast–slow method and shows that high performance slow light waveguides can be realised with lengths much longer than the writing field of a given e-beam lithography tool.     

Low loss broadband polarization independent fishnet negative index metamaterial at 40 GHz

We present a polarization independent fishnet negative index metamaterial at 40 GHz. The structure is investigated theoretically using finite element method simulations and experimentally by measuring the amplitude and phase of the S-parameters. The experimental setup for free space measurements of both transmission and reflection is hereby introduced. The internal properties are thereafter retrieved and show the double-negative behavior of the structure. This negative index metamaterial exhibits very high transmission (?0.13 dB), low reflection (?33.1 dB) and a high figure of merit (FOM = |Re(n)/Im(n)| = 42), where the real part of the refractive index is nearly ?1 (Re(n) = ?0.93) at 40 GHz.     

Novel optical add-drop multiplexer based on dual racetrack resonators

In this paper, we designed and fabricated a four-channel optical add-drop multiplexer (OADM) based on dual racetrack resonators. The size of the fabricated device is only 2400 μm × 500 μm. The fabricated device can effectively and perfectly realize the signals upload and download. The free spectral range (FSR) of OADM is about 15.2 nm. We take the spectral responses near 1555 nm as an example. When the device acts as an optical drop multiplexer, the minimum insertion loss is 4.481 dB and the maximum extinction ratio is 31.931 dB. The maximum adjacent channels crosstalk is -9.845 dB. When the device acts as an optical add multiplexer, the minimum insertion loss is 0.944 dB and all of the extinction ratios are bigger than 25 dB. The maximum crosstalk is -16.531 dB which indicates the crosstalk can be neglected.     

Theory and experiment of flat-top all-fiber comb filter based on two high birefringence fiber Sagnac loop filters

A simple flat-top all-fiber comb filter based on two high birefringence fiber (HBF) Sagnac loop filters is presented. The proposed flat-top comb filter consists of two HBF Sagnac loop filters with two polarization controllers (PCs) and a fiber circulator. According to the theoretical analysis, with proper settings of the polarization state of the PCs, the comb filter can realize flat-top passband and the channel spacing also can be switched when the comb filter is convex spectrum. The 0.3 dB bandwidth of the flat-top passband is 0.49 nm with a free spectral range of 1.4 nm. The maximum extinction ratio is nearly 20 dB. The comb filter with switchable channel spacing can be obtained from 0.7 nm to 1.4 nm.     

CMOS—compatible reconfigurable microring demultiplexer with doped silicon slab heater

We present a 1×4 reconfigurable demultiplexer based on cascaded silicon microring resonators. The device is fabricated on a 0.18 μm complementary metal oxide semiconductor (CMOS) process. A homogeneous doped silicon slab heater is proposed and fabricated directly on the slab region of the microring resonator for thermal tuning. The flows of the heating currents in the heaters are parallel to the ring waveguide through the heavily doped slab regions located on both sides of the ring waveguide without through the waveguide core regions. The proposed doped heaters are experimentally verified with low-voltage operation and tuning efficiency of ～77 pm/mW. Without any tuning or trimming, predicted average channel spacing distribution in the whole free spectral range (FSR) is demonstrated. Full reconfigurability is also demonstrated in the demultiplexer with channel spacing of 2 nm (250 GHz) and 1 nm (125 GHz), corresponding to channel isolation of less than ?21 dB and ?16 dB, respectively. Such a low-voltage operation and reconfigurable demultiplexer is suitable for on-chip optical interconnect.     

Design and VNA-measurement of coplanar waveguide (CPW) on benzocyclobutene (BCB) at THz frequencies

The low permittivity and the low loss tangent of the benzocyclobutene polymer (BCB) offers to coplanar waveguides (CPW) a low dispersive propagation properties at THz frequency. These transmission lines have been designed, modeled with a three dimensional (3D) solver of Maxwell equations based on finite element method (FEM) from 20 to 1000 GHz at various characteristic impedances (Z_c). Their dispersion and losses (radiation, conduction and dielectric) have been investigated separately versus the waveguide size, the nature of the substrate (dielectric or semiconductor) to optimize the THz signal propagation. Monomode CPW on BCB numerically designed for various Z_c were realized and measured with vector network analyzer (VNA). S-parameters of CPW are de-embedded by optimization of the accesses’ model. A good agreement is found between experimental and numerical results with low attenuation constants of 2.7 dB/mm and 3.5 dB/mm at 400 GHz and 500 GHz, respectively.     

Tunable dual-wavelength fiber laser based on an opto-VLSI processor and four-wave mixing in a photonic crystal fiber

A stable wavelength and wavelength spacing tunable dual-wavelength fiber laser based on an Opto-very-large-scale-integration (Opto-VLSI) processor and four-wave mixing (FWM) in a high-nonlinear photonic crystal fiber is experimentally demonstrated. The results show that the line width of the tunable dual-wavelength fiber laser is 0.02 nm, and the wavelength spacing can be tuned from 0.8 nm to 4 nm with a 0.15 nm step. Under the influence of the FWM, the uniformity is below 0.6 dB and the measured side mode suppression ratio (SMSR) is above 45 dB.     

Dual-stage L-band erbium-doped fiber amplifier with distributed pumping from single pump laser

A dual-stage L-band erbium-doped fiber amplifier with a flat gain bandwidth over 36 nm is demonstrated using pump distribution technique. The pump power was distributed to two stages depending on the splitting ratio and the length of erbium-doped fiber that was used for this configuration. Both parameters are the key components for achieving a substantially flat gain response throughout the L-band region ranging from 1570 nm to 1605 nm. Although the input signal power was varied from ? 30 dBm to 0 dBm, gain of 17 dB with slight variations of less than 1.5 dB and a noise figure of less than 6.7 dB were achieved. All the results obtained show better performances when comparison was made with the conventional single-stage L-band optical amplifier.     

Tunable dual-wavelength erbium-doped fiber ring laser covering both C-band and L-band for high-speed communications

A simple, continuously tunable dual-wavelength erbium-doped fiber ring laser (TDEDFL) structure for applications in high-speed communication systems is proposed and experimentally demonstrated. The dual-wavelength tuning range is 58 nm covering both the C-band and L-band from 1547 to 1605 nm. We can not only obtain a 45% improvement over previously reported tuning ranges, but also tune the wavelength of each lasing output independently. The power equalization of the dual-wavelength outputs is less than 1.5 dB. We obtain extremely stable power variation and wavelength fluctuation at room temperature. Using this fiber laser, a 10-Gb/s data transmission over a 25-km single-mode fiber (SMF) can be made available with a power penalty of 0.5 dB is demonstrated with this laser.     

Theoretical analysis and realization of optoelectrical predistortion optical transmitter for the simultaneous suppression of IM3 and IM5 signal

We present an opto-electrical predistortion optical transmitter showing significant reductions in both 3rd-order and 5th-order intermodulations (IM3 and IM5). The simultaneous reductions of IM3 and IM5 are achieved by choosing an appropriate bias current and RF input power for the LD, obtained by the analysis of the 3rd-order to 5th-order intermodulation distortion ratio (TFR). In our experiments, two DFB-LDs (master and slave LDs) with a similar performance are used; the matching circuits of the two LDs are designed to have equal properties. The experimental results show that reductions of 30 dB in the IM3 and 12 dB in the IM5 are achieved simultaneously under the optimum TFR conditions of a 12 mA bias current and a 0 dBm RF power at 2.2 GHz.     

A miniaturized HTS microwave receiver front-end subsystem for radar and communication applications

This paper presents a miniaturized high performance high temperature superconducting (HTS) microwave receiver front-end subsystem, which uses a mini stirling cryocooler to cool a high selective HTS filter and a low noise amplifier (LNA). The HTS filter was miniaturized by using specially designed compact resonators and fabricating with double-sided YBCO films on LAO substrate which has a relatively high permittivity. The LNA was specially designed to work at cryogenic temperature with noise figure of 0.27 dB at 71 K. The mini cryocooler, which is widely used in infrared detectors, has a smaller size (60 mm × 80 mm × 100 mm) and a lighter weight (340 g) than the stirling cryocoolers commonly used in other HTS filter subsystem. The whole front-end subsystem, including a HTS filter, a LNA, a cryocooler and the vacuum chamber, has a size of only φ120 mm × 175 mm and a weight of only 3.3 kg. The microwave devices inside the subsystem are working at 71.8 K with a consumed cooling power of 0.325 W. The center frequency of this subsystem is 925.2 MHz and the bandwidth is 2.7 MHz (which is a fractional bandwidth of 0.2%), with the gain of 19.75 dB at center frequency and the return loss better than ?18.11 dB in the pass band. The stop band rejection is more than 60 dB and the skirt slope is exceeding 120 dB MHz^?1. The noise figure of this subsystem is less than 0.8 dB. This front-end subsystem can be used in radars and communication systems conveniently due to it’s compact size and light weight.     

Experimental study on tandem pumped fiber amplifier

We present the experimental results of a 1083 nm fiber amplifier tandem pumped by 1030 nm fiber laser. The output characteristics of the tandem pumped amplifier with cladding-pump and core-pump schemes are both investigated. The 1083 nm signal laser has not been efficiently amplified when cladding-pumped by 1030 nm laser for the weak absorption of the gain fiber. The core-pump scheme works well with the amplifier. The output properties with different gain fiber length are experimentally investigated. The maximum output power is 2.4 W with power conversion efficiency of 60%.