Stability in sliding mode of nonstationary automatic-control systems of variable structure with switched filters

Stability conditions for a nonstationary automatic-control system of variable structure in sliding mode are established. The controller of the system has feedback-switched filters functioning together with the shaper and actuator. The nonstationary parameters of the system vary within given ranges, at a finite rate, under appropriate control laws, with adjustment for the error signal, its derivatives of finite order, and all variable parameters of the filter. The parameters of the switching hyperplane remain constant. This approach to stability analysis is based on the existence conditions for the sliding mode at the switching boundary in the phase space. The general stability and instability criteria are applied to nonstationary automatic filtered-control systems of variable structure of the third order __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 10, pp. 116–134, October 2006.     

Stability of Nonstationary Automatic-Control Systems of Variable Structure in Forced Motion

Conditions of stability in sliding mode are obtained for nonstationary dynamic automatic-control processes of variable structure. The nonstationary parameters of a control process subjected to external perturbations vary in given ranges, whereas the parameters of the switching plane remain constant for the appropriately chosen parameters of discontinuous logic control laws. The corresponding system of differential equations contains coefficients that vary stepwise in time together with the parameters of the controlled process. The general stability criteria for the solutions of variable-structure systems are used to analyze the stability of motion in sliding mode of an automatic variable-structure control system of the second order     

Technical stability of stationary automatic control systems of variable structure with switched filters

Sufficient conditions for the technical stability in measure of a nonstationary control system with variable structure are established. The controller of the system has feedback-switched filters functioning together with shaper and actuator. It is assumed that the nonstationary parameters of the system vary within given ranges, at a finite rate, with appropriate control laws, with adjustment against mismatch signal, its derivatives of finite order, and all variable parameters of the filter. The parameters of the switching hyperplane remain constant. This approach for analysis of technical stability does not involve sliding mode conditions. Criteria of technical instability in measure for the control system under consideration are formulated using the properties of systems of comparison from below. The general criteria of technical stability and instability are applied to nonstationary filtered-control systems of variable structure of the third order. The comparison method based on normalized Lyapunov functions is used __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 6, pp. 110–127, June 2006.     

Technical Stability of Forced Motion in Nonstationary Automatic-Control Systems of Variable Structure

Sufficient conditions of technical stability are established for nonstationary automatic-control systems of variable structure. The case is considered where for appropriate controls and for all admissible initial perturbations from a predefined measurable set of initial states, the nonstationary parameters of a process under external actions vary within given ranges. The control process depends on the mismatch signal and its derivatives up to an order that is less by one than the order of the equations of motion. The associated system of differential equations contains discontinuous time-dependent coefficients. A relationship is established between the eigenvalues of the quadratic forms of the given Lyapunov functions and the technical-stability criteria. It is shown that the technical-stability conditions do not depend on the sliding-mode conditions for variable-structure control processes     

Technical Stability of Nonstationary Automatic-Control Systems with Variable Structure

Sufficient conditions of technical stability in measure are established for nonstationary automatic-control systems with variable structure and logic control laws dependent on the mismatch error and its derivatives of finite order for all admissible initial perturbations from a predefined measurable set of initial perturbations. The associated systems of differential equations contain time-dependent coefficients. The logic control laws are described by a variable jump control function of the mismatch coordinate and its derivatives of finite order that is no higher than that of the initial system of equations. Using a signal and its derivatives for control increases the quality of discontinuous control. The relationship between the eigenvalues of the quadratic forms of the corresponding Liapunov functions and the criteria of technical stability is revealed. The general results are applied to a variable-structure system of the third order     

Technical Stability of Forced Automatic-Control Variable-Structure Systems

Sufficient conditions for technical stability of functional states of controlled systems with a variable structure are derived. Allowance is made for external perturbations acting on the given process for all possible initial distributions from the set of the process' initial states predetermined in a quadratic measure. The differential equations characterizing the system under consideration include coefficients that vary stepwise with stepwise change in the parameters of the discontinuous control function. It is shown that the conditions of technical stability obtained do not necessarily depend on the existence of sliding modes in variable-structure systems. The eigenvalues of the quadratic forms of the corresponding Lyapunov functions are found to relate to the criteria of technical stability of automatic-control variable-structure processes     

惯性平台稳定回路的变结构控制

本文讨论了惯性平台稳定回路的变结构滑模控制规律的设计问题。在二自由度陀螺稳定平台中,稳定回路通常按角度输入进行设计,但是这种系统的动态误差主要来自舰船摇摆时轴上的摩擦力矩引起的稳定误差,因此,用经典方法设计的控制规律在实际使用中动态误差较大。本文用变结构滑模控制方法设计了控制规律,仿真结果表明变结构稳定回路的抗干扰能力和跟踪性能得到了较大的改善,提高了惯性稳定平台的可靠性和精度。     

Variable structure control of indefinite-dimensional systems

ＶＡＲＩＡＢＬＥＳＴＲＵＣＴＵＲＥＣＯＮＴＲＯＬＯＦＩＮＤＥＦＩＮＩＴＥ－ＤＩＭＥＮＳＩＯＮＡＬＳＹＳＴＥＭＳＬｉＷｅｎ－ｌｉｎ（李文林）ＢｉａｎＷｅｎ－ｍｉｎｇ（边文明）（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｔｈｅｍａｔｉｃｓ,ＨｅｎａｎＮｏｒｍａｌＵｎｉ...     

平滑变结构滤波在航天器组合导航中的应用

针对系统模型不准确或噪声无法建模等导致的组合导航精度下降问题,在闭环间接滤波方案中引入一种基于变结构和滑模控制概念的平滑变结构滤波器(SVSF),该滤波器对于建模的不确定性和给定上限但无法建模的扰动噪声具有较好的稳定性和鲁棒性。将提出的方案应用于航天器SINS/GNSS组合导航系统中,进行仿真验证,并与EKF滤波器进行比较。仿真结果表明:SVSF尽管不是"最优"滤波器,但其精度与EKF相当,可实现位置精度优于10 m,速度精度优于0.01 m/s;在模型误差与测量误差增大和系统突变等情况下,其较EKF更加具有抗干扰能力,可提高导航系统的鲁棒性和稳定性。     

基于滑模理论的建筑结构分散稳定控制

基于大系统分散控制思想,将大尺度高阶建筑结构系统分解为多个子结构系统;子结构之间的相互耦合作用视为有界广义力,得到以状态方程形式的子结构模型。利用滑模理论的抗摄动条件,设计具有全局稳定的子结构滑动模态轨迹,利用子结构系统局部状态实现全局稳定的控制力条件,并以参数ρi实现各子结构间的调节,建立稳定的分散控制格式。在控制算法中采用了准滑模控制方法,克服变结构滑动模态中的抖振影响。利用本文方法,对20层钢结构基准模型在地震激励下的控制进行设计并数值仿真,验证了该方法的有效性。     

考虑控制延时影响的相邻建筑结构的离散变结构振动控制方法

研究了基于离散变结构控制算法的考虑控制延时影响的相邻建筑结构体系地震反应半主动控制的基本设计和计算方法。首先,建立了相邻结构体系的力学模型及连续运动状态方程,并将其离散化成标准离散状态方程形式。其次,简要地讨论了离散变结构控制器的设计方法,包括切换平面的选择及离散趋近率的构成．最后,应用本文方法对主楼12层,裙房5层的实例结构进行了数值仿真分析,结果表明,该控制方法不仅能有效抑制相邻结构地震反应的鞭梢效应,而且在控制延时存在的情况下,仍能保证系统的减震性能和稳定性。     

Sliding-mode control of switched delay systems with nonlinear perturbations: average dwell time approach

This paper investigates the robust sliding-mode control (SMC) problem for a class of uncertain switched systems with a time delay. The design process of sliding-mode control is divided into two steps. First, a sliding surface is constructed such that the reduced-order equivalent sliding mode restricted to the sliding surface is completely invariant to all admissible uncertainties under switching laws with an average dwell-time property. Second, variable structure controllers are developed to drive the states of the switched delay system to reach the sliding surface in finite time and remain on it thereafter. Finally, a numerical example is given to illustrate the effectiveness of the proposed method.     

A switching fractional calculus-based controller for normal non-linear dynamical systems

In this paper, a fractional calculus-based terminal sliding mode controller is introduced for finite-time control of non-autonomous non-linear dynamical systems in the canonical form. A fractional terminal switching manifold which is appropriate for canonical integer-order systems is firstly designed. Then some conditions are provided to avoid the inherent singularities of the conventional terminal sliding manifolds. A non-smooth Lyapunov function is adopted to prove the finite time stability and convergence of the sliding mode dynamics. Afterward, based on the sliding mode control theory, an equivalent control and a discontinuous control law are designed to guarantee the occurrence of the sliding motion in finite time. The proposed control scheme uses only one control input to stabilize the system. The proposed controller is also robust against system uncertainties and external disturbances. Two illustrative examples show the effectiveness and applicability of the proposed fractional finite-time control strategy. It is worth noting that the proposed sliding mode controller can be applied for control and stabilization of a large class of non-autonomous non-linear uncertain canonical systems.     

Technical Stability Conditions for Systems of Variable Structure with Derivatives of the Control Function

We derive sufficient conditions for the technical stability of forced states of automatic control systems with a variable structure depending on the derivatives of the control function. For arbitrary admissible initial perturbations from a measurable set of initial states of a control system with filtering, the technical stability conditions do not depend on the sliding conditions in the given domain of the system parameters. We find how the properties of the eigenvalues of the quadratic forms of the Lyapunov functions are related to the technical stability conditions for automatic control systems of variable structure with filtering. The technical stability conditions are analyzed for automatic control systems with third-order filtering where the forming signal creates eight structures     

离散滑模变结构控制在磁悬浮球系统中的应用

磁悬浮球实验装置是典型的非线性系统,该装置提供了常规PID控制,但难以达到理想的控制效果,由此提出采用离散滑模变结构控制来研究该系统。文中首先分析了离散滑模切换面和趋近率,然后设计了存在系统干扰和抖动情况下的离散滑模控制器,并研究了其收敛性,在此基础上提出了克服干扰和抖动的积分补偿离散滑模控制器,最后将所提出的控制方法在磁悬浮球实验装置上进行验证。试验验证结果表明,系统响应时间由PID控制的15 s减小到5 s,控制偏差也有所减小,控制效果优于PID控制,适合磁悬浮球系统的控制,为该实验装置提供了一套新的实验方法。     

EXPERIMENTAL ANALYSIS OF ACTIVE STEERING HARDWARE-IN-LOOP BASED ON SLIDING MODE CONTROL 1)

为了提高重型车辆在转向过程中的稳定性和安全性,本文提出了一种基于滑模变结构控制的主动前轮转向控制策略,基于这种策略设计了主动转向控制器,建立了三轴商用车的二自由度车辆动力学简化模型及整车模型,利用TruckSim--Simulink建立联合仿真平台以及进行硬件在环实验。在不同工况、不同车速下,分别对有无主动转向控制器的车辆进行了操纵稳定性分析,并在此基础上进行了滑模变结构控制的主动转向影响因素敏感性分析。实验结果表明,这种控制器策略在不同工况下具有较强的适应性。     

No-chatter variable structure control for fractional nonlinear complex systems

This paper concerns the problem of robust control of uncertain fractional-order nonlinear complex systems. After establishing a simple linear sliding surface, the sliding mode theory is used to derive a novel robust fractional control law for ensuring the existence of the sliding motion in finite time. We use a nonsmooth positive definitive function to prove the stability of the controlled system based on the fractional version of the Lyapunov stability theorem. In order to avoid the chattering, which is inherent in conventional sliding mode controllers, we transfer the sign function of the control input into the first derivative of the control signal. The proposed sliding mode approach is also applied for control of a class of nonlinear fractional-order systems via a single control input. Simulation results indicate that the proposed fractional variable structure controller works well for stabilization of hyperchaotic and chaotic complex fractional-order nonlinear systems. Moreover, it is revealed that the control inputs are free of chattering and practical.     

一种改进的变结构控制器在转台中的应用

针对变结构控制的抖振问题,本提出了一种新的解决方案,采用多切换面的改进变结构控制,在保证了理想滑动模态的抗干扰能力强、鲁棒性好的优点的同时,很好的削弱了系统抖振。仿真结果表明,这种控制规律应用在转台上取得了良好的控制效果。     

Global synchronization in fixed time for semi-Markovian switching complex dynamical networks with hybrid couplings and time-varying delays

This paper is concerned with the global synchronization in fixed time for semi-Markovian switching complex dynamical networks with hybrid couplings and time-varying delays in the presence of disturbances. Firstly, the property with respect to the global stability in fixed time is developed for semi-Markovian switching nonlinear systems. Subsequently, a novel sliding manifold with double integration is presented based on the proposed principle of convergence in fixed time. Under the designed sliding mode controller, the state trajectory of synchronization error system is driven to the prescribed sliding manifold in fixed time. In addition, the global stability in fixed time of sliding mode dynamics is proved analytically. By means of the stochastic Lyapunov–Krasovskii functional approach, the synchronization condition is established in terms of linear matrix inequalities; moreover, the stochastic fixed settling-time can be determined to any desired values in advance, via the configuration of parameters in the proposed controller. Finally, two numerical examples are provided to demonstrate the validity of the theoretical results and the feasibility of the proposed approach.

     

用具有负定矩阵的梯度系统构造稳定的变质量力学系统

随着科学技术的发展,对喷气飞机、火箭等变质量系统动力学的研究显得越来越重要, 并且总是希望变质量系统的解是稳定的或渐近稳定的. 而通用的研究稳定性的Lyapunov直接法有很大难度, 因为直接从微分方程出发构造Lyapunov函数往往很难实现. 本文给出一种研究稳定性的间接方法, 即梯度系统方法. 该方法不但能揭示动力学系统的内在结构, 而且有助于探索系统的稳定性、渐进性和分岔等动力学行为. 梯度系统的函数V通常取为Lyapunov函数, 因此梯度系统比较适合用Lyapunov函数来研究. 列写出变质量完整力学系统的运动方程,在系统非奇异情形下,求得所有广义加速度. 提出一类具有负定矩阵的梯度系统, 并研究该梯度系统解的稳定性. 把这类梯度系统和变质量力学系统有机结合,给出变质量力学系统的解可以是稳定的或渐近稳定的条件, 进一步利用矩阵为负定非对称的梯度系统构造出一些解为稳定或渐近稳定的变质量力学系统. 通过具体例子,研究了变质量系统的单自由度运动,在怎样的质量变化规律、微粒分离速度和加力下,其解是稳定的或渐近稳定的. 本文的构造方法也适合其它类型的动力学系统.