Ancillary Ligand Effects on Red-Emitting Cyclometalated Iridium Complexes

In this work, a series of ten new red-emitting heteroleptic iridium(III) complexes of the type Ir(C^N)₂(L^X) (C^N=cyclometalating ligand, L^X=monoanionic chelating ancillary ligand) is introduced. The suite of new complexes includes two different cyclometalating ligands and five different ancillary ligands, with the primary goal of investigating the effect of the ancillary ligand structure on the excited-state dynamics. The structural variety of the ancillary ligands permitted investigations of the effects of donor atom identity, chelate ring size, and substituents on the electronic structure and excited state properties. Electrochemical analysis showed that the ancillary ligand has a substantial effect on the energy of the HOMO, whereas the LUMO is left unperturbed. Photoluminescence spectra showed that the ancillary ligand can sometimes strongly influence the emission wavelength, but in all cases is an important determinant of the excited-state dynamics.     

Theoretical studies of ground and excited electronic states in a series of heteroleptic iridium complexes using density functional theory

A series of new heteroleptic iridium(III) complexes [Ir(C^?N)₂(N^?N)]PF₆ ( 1 ‐ 6 ) (each with two cyclometalating C^?N ligands and one neutral N^?N ancillary ligand, where C^?N = 2‐phenylpyridine (ppy), 5‐methyl‐2‐(4‐fluoro)phenylpyridine (F‐mppy), and N^?N = 2,2′‐dipyridyl (bpy), 1,10‐phenanthroline (phen), 4,4′‐diphenyl‐2,2′‐dipyridy (dphphen) were found to have rich photophysical properties. Theoretical calculations are employed for studying the photophysical and electrochemical properties. All complexes are investigated using density functional theory. Excited singlet and triplet states are examined using time‐dependent density functional theory. The low‐lying excited‐state geometries are optimized at the ab initio configuration interaction singles level. Then, the excited‐state properties are investigated in detail, including absorption and emission properties, photoactivation processes. The excited state of complexes is complicated and contains triplet metal‐to‐ligand charge transfer, triplet ligand‐to‐ligand charge transfer simultaneously. Importantly, the absorption spectra and emission maxima can be tuned significantly by changing the N^?N ligands and C^?N ligands. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Complexes of Rhodium(III) with Two Chelating C⁁N Ligands and One Diimine Ligand

The synthesis of two series of cyclometalated Rh^III compounds is described, namely of 5 dinuclear chlorobridged species [{Rh(C?N)₂} (μ-Cl)₂] A and of 15 mononuclear complexes [Rh(C?N)₂(N?N)]⁺ B ; C?N stands for five different cyclometalating ligands, i.e. deprotonated phenylpyridine, deprotonated 2-(thienyl)pyridine, and three deprotonated 1-aryl-1H-pyrazoles, and N?N for six diimine ligands such as 2,2-bihyridine, 2,2′-bi-1H-imidazole, and 2,2′-bipyrimidine. For (2,2′-bipyridine)bis[2-(thien-2-yl)pyridinato-N,C^3′]rhodium(III) chloride, an X-ray structure determination was carried out. In the other cases, ¹H-NMR spectra established the configuration of the complexes. All mononuclear and dinuclear complexes show a C,C cis-configuration. The UV/VIS-absorption bands at longest wavelength are most likely due to metal-to-ligand charge-transfer (MLCT) transitions, depending on the nature of the cyclometalating ligand C?N and on the diimine ligand N?N. The receptor orbital is in some cases on the cyclometalating ligand, in others on the diimine. All monomer complexes exhibit at least one reversible reduction wave in the cyclovoltammogram in dimethylformamide solutions, attributable to a ligand-centered reduction. It is, therefore, concluded that the LUMO in [Rh(C?N)₂(N?N)]⁺ is of L(π*) character, as opposed to [Rh(bpy)₃]³⁺, where it is a metal d-orbital. The crystal system of (2,2′-bipyridine)bis[2-(thien-2-yl)pyridinato-N,C_3′]rhodium(III) chloride—water (1/2.125) is tetragonal (space group P⁴; R = 0.036, R_w = 0.040). The Rh-atom has slightly distorted octahedral environment; the average distances are (Rh? N/thienyl? pyridine) = 2.060 (3), Rh? C = 1.9885 (3), and Rh? N(bipyridine) = 2.1415 (3) Å. Of the three ligands the 2,2′-bipyridine is the most planar.     

Synthesis,characterization, and optoelectronic properties of heteroleptic iridium complexes containing substituted 1,3,4-oxadiazole and β-diketone as ligands

The new heteroleptic iridium(III) complexes (BuOXD)₂Ir(tta) and (BuOXD)₂Ir(tmd) [BuOXD?=?2-(4-butyloxyphenyl)-5-phenyl[1,3,4]oxadiazolato-N4,C2, tta?=?1,1,1-trifluoro-4-thienylbutane-2,4-dionato, tmd?=?2,2,6,6-tetramethylheptane-3,5-dionato] have been synthesized and characterized. These complexes have two cyclometalated ligands (C^N) and a bidentate diketone ligand (X) [C^N)₂Ir(X)], where X is a β-diketone with trifluoromethyl, theonyl or t-butyl groups. The color tuning with the change in electronegativity of substituents in the β-diketones has been studied. Photoluminescence spectra of the complexes showed peak emissions at 523 and 549?nm, respectively. The electroluminescent properties of these complexes have been studied by fabricating multi layer devices with device structure ITO/α-NPD/8% iridium complex doped CBP/BCP/Alq₃/LiF/Al. The electroluminescence spectra also showed peak emissions at 526 and 570?nm for (BuOXD)₂Ir(tta) and (BuOXD)₂Ir(tmd), respectively. These metal complexes showed good thermal stability in air to 340°C.     

Thermally Robust and Tuneable Phosphorescent Gold(III) Complexes Bearing (N^N)-Type Bidentate Ligands as Ancillary Chelates

Phosphorescent mono-cyclometalated gold(III) complexes and their possible applications in organic light emitting diodes (OLEDs) can be significantly enhanced with their improved thermal stability by suppressing the reductive elimination of the respective ancillary ligands. A rational tuning of the π-conjugation of the cyclometalating ligand in conjunction with the non-conjugated 5,5′-(1-methylethylidene)bis(3-trifluoromethyl)-1H-pyrazole were used as a strategy to achieve room-temperature phosphorescence emission in a new series of gold(III) complexes. Photophysical studies of the newly synthesised and characterised complexes revealed phosphorescent emission of the complexes at room temperature in solution, thin films when doped in poly(methyl methacrylate) (PMMA) as well as in 2-Me-THF at 77 K. The complexes exhibit highly tuneable emission behaviour with photoluminescent quantum efficiencies up to 22 % and excited state lifetimes in the range of 63–300 μs. Detailed photophysical investigations in combination with DFT and TD-DFT calculations support the conclusion that the emission properties are strongly dictated by both the cyclometalating ligand and the ancillary chelating ligand. Thermogravimetric studies further show that the thermal stability of the Au^III complexes has been drastically enhanced, making these complexes more attractive for OLED applications.     

Efficient Green‐Light‐Emitting Electrochemical Cells Based on Ionic Iridium Complexes with Sulfone‐Containing Cyclometalating Ligands

A new approach to obtain green‐emitting iridium(III) complexes is described. The synthetic approach consists of introducing a methylsulfone electron‐withdrawing substituent into a 4‐phenylpyrazole cyclometalating ligand in order to stabilize the highest‐occupied molecular orbital (HOMO). Six new complexes have been synthesized incorporating the conjugate base of 1‐(4‐(methylsulfonyl)phenyl)‐1 H‐pyrazole as the cyclometalating ligand. The complexes show green emission and very high photoluminescence quantum yields in both diluted and concentrated films. When used as the main active component in light‐emitting electrochemical cells (LECs), green electroluminance is observed. High efficiencies and luminances are obtained at low driving voltages. This approach for green emitters is an alternative to the widely used fluorine‐based substituents in the cyclometalating ligands and opens new design possibilities for the synthesis of green emitters for LECs.     

Reversible Double C?H Bond Activation of Linear and Cyclic Ethers To Form Iridium Carbenes

The double C? H bond activation of a series of linear and cyclic ethers by the iridium complex [Tp^tol′Ir(C₆H₅)(N₂)] ( 2? N₂), which features a cyclometalated hydrotris(3‐p‐tolylpyrazol‐1‐yl)borate ligand (Tp^tol′) coordinated in a κ⁴‐N,N′,N′′,C manner, has been studied. Two methyl ethers, namely, Me₂O and MeOtBu, along with diethyl ether and the cyclic ethers tetrahydrofuran, tetrahydropyran (THP), and 1,4‐dioxane have been investigated with formation in every case of the corresponding hydride carbene complexes 3 – 8 , which are stabilized by κ⁴‐coordination of the ancillary Tp^tol′ ligand. Five of the compounds have been structurally authenticated by X‐ray crystallography. A remarkable feature of these rearrangements is the reversibility of the double C? H bond activation of Me₂O, MeOtBu, Et₂O, and THP. This has permitted catalytic deuterium incorporation into the methyl groups of the two methyl ethers, although in a rather inefficient manner (for synthetic purposes). Although possible in all cases, C? C coupling by migratory insertion of the carbene into the Ir? C σ bond of the metalated linkage has only been observed for complex 8 that contains a cyclic carbene that results from α,α‐C? H activation of 1,4‐dioxane. Computational studies on the formation of iridium carbenes are also reported, which show a role for metalated Tp ligands in the double C? H activation and account for the reversibility of the reaction in terms of the relative stability of the reagents and the products of the reaction.     

Deep Red Emitting Heteroleptic Ir(III) Complexes that Incorporate Unsymmetrical 4-quinoline Carboxylic Acid Derived Ligands

Six disubstituted ligands based upon 2-(2′-pyridinyl/pyrazinyl)quinoline-4-carboxylic acids have been synthesised, solvent-free, in one step from a range of commercially available isatin derivatives. These species behave as ancillary chelating ligands for Ir(III) complexes of the form [Ir(C^N)₂(N^N)]PF₆ (where C^N=cyclometalating ligand; N^N=2-(2′-pyridinyl/pyrazinyl)quinoline-4-carboxylic acids). An X-ray crystallographic study on one complex shows a distorted octahedral geometry wherein a cis-C,C and trans-N,N coordination mode is observed for the cyclometalating ligands. DFT calculations predicted that variations in N^N ligand from 2,2′-bipyridine to L^{1 – 6} should localise the LUMO on to the Lⁿ ligand and that the complexes are predicted to display MLCT/LLCT character. All complexes displayed luminescence in the deep red part of the visible region (674–679 nm) and emit from triplet states, but with little apparent tuning as a function of L^{1 – 6} . Further time-resolved transient absorption spectroscopy supports the participation of these triplet states to the excited state character.     

Evolution of 2, 3′-bipyridine class of cyclometalating ligands as efficient phosphorescent iridium(III) emitters for applications in organic light emitting diodes

Nowadays, the design and development of novel phosphorescent iridium(III) complexes for various optoelectronic applications is a well-recognized area of research. The fascinating photophysical properties of iridium(III) compounds are strongly influenced by the spin-orbit coupling exerted by the iridium(III) core, usually resulting in intense emissions with short excited-state lifetimes, which can be precisely controlled with the aid of molecular engineering of the chelating ligand. This review focuses on the recent developments and state of the art knowledge on phosphorescent iridium(III) compounds, especially on heteroleptic complexes derived from 2,3′-bipyridine class of cyclometalating and ancillary ligands, highlighting the excited state phenomenon behind their emission behavior.     

Enhanced luminescent iridium(III) complexes bearing aryltriazole cyclometallated ligands

Herein we report the synthesis of 4-aryl-1-benzyl-1H-1,2,3-triazoles (atl), made via "Click chemistry" and their incorporation as cyclometallating ligands into new heteroleptic iridium(III) complexes containing diimine (N(^)N) ancillary ligands 2,2'-bipyridine (bpy) and 4,4'-di-tert-butyl-2,2'-bipyridine (dtBubpy). Depending on decoration, these complexes emit from the yellow to sky blue in acetonitrile (ACN) solution at room temperature (RT). Their emission energies are slightly blue-shifted and their photoluminescent quantum efficiencies are markedly higher (between 25 and 80%) than analogous (C(^)N)(2)Ir(N(^)N)(+) type complexes, where C(^)N is a decorated 2-phenylpyridinato ligand. This increased brilliance is in part due to the presence of the benzyl groups, which act to sterically shield the iridium metal center. X-ray crystallographic analyses of two of the atl complexes corroborate this assertion. Their electrochemistry is reversible, thus making these complexes amenable for inclusion in light-emitting electrochemical cells (LEECs). A parallel computational investigation supports the experimental findings and demonstrates that for all complexes included in this study, the highest occupied molecular orbital (HOMO) is located on both the aryl fragment of the atl ligands and the iridium metal while the lowest unoccupied molecular orbital (LUMO) is located essentially exclusively on the ancillary ligand.     

Sterically and Electronically Flexible Pyridylidene Amine Dinitrogen Ligands at Palladium: Hemilabile cis/trans Coordination and Application in Dehydrogenation Catalysis

Ligand design is crucial for the development of new catalysts and materials with new properties. Herein, the synthesis and unique hemilabile coordination properties of new bis-pyridylidene amine (bis-PYE) ligands to palladium, and preliminary catalytic activity of these complexes in formic acid dehydrogenation are described. The synthetic pathway to form cationic complexes [Pd(bis-PYE)Cl(L)]X with a cis-coordinated N,N-bidentate bis-PYE ligand is flexible and provides access to a diversity of Pd^II complexes with different ancillary ligands (L=pyridine, DMAP, PPh₃, Cl, P(OMe)₃). The ¹H NMR chemical shift of the trans-positioned PYE N−CH₃ unit is identified as a convenient and diagnostic handle to probe the donor properties of these ancillary ligands and demonstrates the electronic flexibility of the PYE ligand sites. In the presence of a base, the originally cis-coordinated bis-PYE ligand adopts a N,N,N-tridentate coordination mode with the two PYE units in mutual trans position. This cis–trans isomerization is reverted in presence of an acid, demonstrating a unique structural and steric flexibility of the bis-PYE ligand at palladium in addition to its electronic adaptability. The palladium complexes are active in formic acid dehydrogenation to H₂ and CO₂. The catalytic performance is directly dependent on the ligand bonding mode, the nature of the ancillary ligand, the counteranion, and additives. The most active system features a bidentate bis-PYE ligand, PPh₃ as ancillary ligand and accomplishes turnover frequencies up to 525 h⁻¹ in the first hour and turnover numbers of nearly 1000, which is the highest activity reported for palladium-based catalysts to date.     

Introduction of new ancillary ligands to the iridium complexes having 2,3-diphenylquinolinato ligands for OLED

We investigated the effect of an ancillary ligand (AL) on the emission color and luminous efficiencies of its complex, Ir(4-Me-2,3-dpq)₂(AL), where 4-Me-2,3-dpq represents 4-methyl-2,3-diphenylquinolinato ligand. We expected that ancillary ligand modification by introduction of the bulky substituent to the complexes might allow luminous efficiency increase by reduction of T–T annihilation. Furthermore, some ancillary ligands may contribute to fine-tuning of their complex emission colors by influencing the energy level of Ir d-orbitals upon the orbital mixing. As new ancillary ligands substituting for acac which is a typical AL in the iridium complexes, pyrazolone-based ligands, 4-R-5-methyl-2-phenyl-2,4-dihydro-pyrazol-3-one series (przl-R), were prepared, where R represents C₆H₅, C₆H₄CH₃ and C₆H₄Cl. These ligands were chelated to the iridium center to yield a new series of the iridium complexes, Ir(4-Me-2,3-dpq)₂(przl-R). The X-ray crystal structure of Ir(4-Me-2,3-dpq)₂(przl-C₆H₄Cl) was determined. The electrochemical and luminescence properties of the iridium complexes were investigated. The effect of the przl-substituents on the emission colors of the complexes was not significant. On the other hand, the luminous efficiencies of Ir(4-Me-2,3-dpq)₂(przl-C₆H₅) and Ir(4-Me-2,3-dpq)₂(przl-C₆H₄CH₃) were higher than that of Ir(4-Me-2,3-dpq)₂(acac).     

Phosphorescent Cyclometalated Iridium(III) Complexes That Contain Substituted 2‐Acetylbenzo[b]thiophen‐3‐olate Ligand for Red Organic Light‐Emitting Devices

We report the synthesis of a new class of thermally stable and strongly luminescent cyclometalated iridium(III) complexes 1 – 6 , which contain the 2‐acetylbenzo[b]thiophene‐3‐olate (bt) ligand, and their application in organic light‐emitting diodes (OLEDs). These heteroleptic iridium(III) complexes with bt as the ancillary ligand have a decomposition temperature that is 10–20 % higher and lower emission self‐quenching constants than those of their corresponding complexes with acetylacetonate (acac). The luminescent color of these iridium(III) complexes could be fine‐tuned from orange (e.g., 2‐phenyl‐6‐(trifluoromethyl)benzo[d]thiazole (cf₃bta) for 4 ) to pure red (e.g., lpt (Hlpt=4‐methyl‐2‐(thiophen‐2‐yl)quinolone) for 6 ) by varying the cyclometalating ligands (C‐deprotonated C^N). In particular, highly efficient OLEDs based on 6 as dopant (emitter) and 1,3‐bis(carbazol‐9‐yl)benzene (mCP) as host that exhibit stable red emission over a wide range of brightness with CIE chromaticity coordinates of (0.67, 0.33) well matched to the National Television System Committee (NTSC) standard have been fabricated along with an external quantum efficiency (EQE) and current efficiency of 9 % and 10 cd A^?1, respectively. A further 50 % increase in EQE (>13 %) by replacing mCP with bis[4‐(6H‐indolo[2,3‐b]quinoxalin‐6‐yl)phenyl]diphenylsilane (BIQS) as host for 6 in the red OLED is demonstrated. The performance of OLEDs fabricated with 6 (i.e., [(lpt)₂Ir(bt)]) was comparable to that of the analogous iridium(III) complex that bore acac (i.e., [(lpt)₂Ir(acac)]; 6 a in this work) [Adv. Mater.­ 2011 , 23, 2981] fabricated under similar conditions. By using ntt (Hnnt=3‐hydroxynaphtho[2,3‐b]thiophen‐2‐yl)(thiophen‐2‐yl)methanone) ligand, a substituted derivative of bt, the [(cf₃bta)₂Ir(ntt)] was prepared and found to display deep red emission at around 700 nm with a quantum yield of 12 % in mCP thin film.     

Light-emitting tridentate cyclometalated platinum(II) complexes containing sigma-alkynyl auxiliaries: tuning of photo- and electrophosphorescence

The synthesis and structural, photophysical, electrochemical, and electroluminescent properties of a class of platinum(II) complexes bearing sigma-alkynyl ancillary ligands, namely [(C/N/N)Pt(C[triple bond]C]nR] [H(C/N/N) = 6-aryl-2,2'-bipyridine; n = 1-4; R = aryl, alkyl, or trimethylsilyl], have been studied. Substituents with different steric and electronic properties were introduced into the tridentate cyclometalating and arylacetylide ligands, and the pi-conjugation length of the oligoynyl moiety was homologously extended from ethynyl to octatetraynyl. The X-ray crystal structures of several derivatives confirm the Pt-(CC) ligation and reveal various intermolecular interactions, such as pi-pi, Pt...Pt, and C-H...F-C. The complexes display good thermal stability and intense phosphorescence in fluid and glassy solutions with high quantum yields and microsecond lifetimes. Their emission energies are sensitive to solvent polarity, the electronic affinities of the substituents on both the cyclometalating and arylacetylide groups, and the length of the oligoynyl ligand. By choosing appropriate cyclometalating and sigma-alkynyl ligands, the emission color of this class of platinum(II) complexes can be tuned from green-yellow to saturated red. In addition to (3)MLCT [Pt(5d) --> pi*(C/N/N)] and (3)IL(C/N/N), intriguing (3)IL(alkynyl) excited states localized on -(C[triple bond]C)(4)- and -(C[triple bond]Cpyrenyl-1) moieties that afford narrow-bandwidth emissions have been observed. Selected Pt(II) complexes were doped into the emissive region of multilayer, vapor-deposited organic light-emitting diodes. The tunable electrophosphorescence energy resembles that recorded in fluid solutions for these emitters, and the devices exhibit high luminance and efficiencies (up to 4.2 cd A(-1)).     

Electroluminescent Properties of LECs Based on Ionic Transition Metal Complexes Using Tetrazole-Based Ancillary Ligand

Light-emitting electrochemical cells (LECs) are a promising type of electroluminescent device for display and lighting applications. In this study, LECs based on ionic iridium complexes utilizing a tetrazole based ancillary ligand were fabricated and their electrical properties were investigated. Two new iridium(III) complexes with tetrazole based ancillary ligands, namely, [Ir(ppy)₂(tetrazole)]PF₆ (complex 1) and [Ir(dfppy)₂(tetrazole)]PF₆ (complex 2) (where ppy is 2-phenylpyridine, dfppy is 2-(2,4-difluorophenyl)pyridine, tetrazole is 5-bromo-2-(2-methyl-2H-tetrazol-5-yl)-pyridine and PF₆ is hexafluorophosphate), have been synthesized and characterized. These synthesized complexes were used for the fabrication of LEC devices. LECs based on complex 1 result in orange light emission (576 nm) with the Commission Internationale de l’Eclairage (CIE) coordinates of (0.45, 0.49), while complex 2 emits green (518 nm) electroluminescence with the CIE coordinates of (0.33, 0.49). Our work suggests that the light emission of cationic iridium complexes can easily be tuned by the substituents on the cyclometalated ligands.     

Study on a set of bis-cyclometalated Ir(III) complexes with a common ancillary ligand

Bis-cyclometalated iridium(iii) complexes [Ir(F(2)ppy)(2)] (), [Ir(F(2)CNppy)(2)] (), [Ir(DMAF(2)ppy)(2)] () and [Ir(MeOF(2)ppy)(2)] () (F(2)ppy = 4',6'-difluoro-2-phenylpyridinate, F(2)CNppy = 5'-cyano-4',6'-difluoro-2-phenylpyridinate, DMAF(2)ppy = 4',6'-difluoro-4-dimethylamino-2-phenylpyridinate, MeOF(2)ppy = 4',6'-difluoro-4-methyl-2-phenylpyridinate and = 3,5-dimethylpyrazole-N-carboxamide) emitting in the sky blue region were synthesized. We studied the effect of the ancillary ligand and the substituents on the cyclometalating ligands on the crystal structures, photophysical and electrochemical properties and the frontier orbitals. Density functional theory (DFT) calculation results indicate that in and the cyclometalating ligands show negligible participation in the HOMO, the ancillary ligand being the main participant along with the Ir(iii) d-orbitals. exhibits the maximum photoluminescence quantum efficiency and radiative emission rates along with the dominant low frequency metal-ligand vibrations and maximum reorganization energy in the excited state. All the substituted complexes show more polar characteristics than , possessing the highest dipole moment among the complexes. The performances of the solution-synthesised organic light emitting devices (OLEDs) of , and doped in a blend of mCP (m-bis(N-carbazolylbenzene)) and polystyrene are studied.     

Synthesis,structure and catalytic polymerization activity of half‐sandwich cyclometallated iridium complexes

A series of mononuclear half‐sandwich cyclometallated iridium complexes with Schiff base ligands were synthesized in good yields. Five air‐stable C,N‐chelate mode complexes were obtained smoothly through metal‐mediated C─H bond activation. Treatments of dimeric metal complexes [Cp*IrCl₂]₂ with ligands L1–L5 afforded the corresponding C,N‐chelate mononuclear half‐sandwich iridium(III) complexes 1 – 5 . These iridium complexes exhibit high catalytic activity for norbornene polymerization. Both steric and electronic effects of the substituted groups have influences on the behaviors of the polymerization process. All complexes were characterized using infrared and NMR spectroscopies and elemental analysis. Molecular structures of complexes 1 , 2 and 5 were further confirmed using single‐crystal X‐ray analysis.     

Photofunctional Platinum Complexes Featuring N‐heterocyclic Carbene‐Based Pincer Ligands

Photoactive platinum complexes of stoichiometry [Pt(^RCCC^R)L]^0/+ (R=Me, nBu and L=? CN, ? C≡CPh, ? N≡CCH₃, ? Py, ? CO) featuring pincer‐type bis N‐heterocyclic carbene (NHC) ligands (^RCCC^R) were synthesized. Organometallic syntheses of these complexes are facile and achievable through standard laboratory procedures. Control of intermolecular Pt???Pt interaction, π–π stacking, and emission tuning is achieved through suitable choice of the NHC‐wingtip substituent (R) and the auxiliary ligand (L). Exposure to specific volatile organic compounds (VOCs) or mechanical grinding triggers changes in emission colors, which render these complexes photofunctional. Solid‐state structures and photoluminescence results are described herein.     

Bright blue phosphorescence from cationic bis-cyclometalated iridium(III) isocyanide complexes

We report new bis-cyclometalated cationic iridium(III) complexes [(C(^)N)(2)Ir(CN-tert-Bu)(2)](CF(3)SO(3)) that have tert-butyl isocyanides as neutral auxiliary ligands and 2-phenylpyridine or 2-(4'-fluorophenyl)-R-pyridines (where R is 4-methoxy, 4-tert-butyl, or5-trifluoromethyl) as C(^)N ligands. The complexes are white or pale yellow solids that show irreversible reduction and oxidation processes and have a large electrochemical gap of 3.58-3.83 V. They emit blue or blue-green phosphorescence in liquid/solid solutions from a cyclometalating-ligand-centered excited state. Their emission spectra show vibronic structure with the highest-energy luminescence peak at 440-459 nm. The corresponding quantum yields and observed excited-state lifetimes are up to 76% and 46 μs, respectively, and the calculated radiative lifetimes are in the range of 46-82 μs. In solution, the photophysical properties of the complexes are solvent-independent, and their emission color is tuned by variation of the substituents in the cyclometalating ligand. For most of the complexes, an emission color red shift occurs in going from solution to neat solids. However, the shift is minimal for the complexes with bulky tert-butyl or trifluoromethyl groups on the cyclometalating ligands that prevent aggregation. We report the first example of an iridium(III) isocyanide complex that emits blue phosphorescence not only in solution but also as a neat solid.     

Monocyclometalated Gold(III) Monoaryl Complexes—A New Class of Triplet Phosphors with Highly Tunable and Efficient Emission Properties

Highly tunable and rich phosphorescent emission properties based on the stable monocyclometalated gold(III) monoaryl structural motif are reported. Monochloro complexes of the type cis‐[(N^C)Au(C₆H₂(CF₃)₃)(Cl)] N^C=2‐phenylpyridine (ppy)] ( 1 ), [N^C=benzo[h]quinoline (bzq)] ( 2 ), [N^C=2‐(5‐Methyl‐2‐thienyl)pyridine (5m‐thpy)] ( 3 ) were successfully prepared in modest to good yields by reacting an excess of 2, 4, 6‐tris(trifluoromethyl)phenyl lithium (LiFmes) with the corresponding dichloride complexes cis‐[(N^C)AuCl₂]. Subsequent replacement of the chloride ligand in 1 with strong ligand field strength such as cyanide and terminal alkynes resulted in complexes of the type cis‐[(ppy)Au(Fmes)(R)] R=CN ( 4 ), I ( 5 ), C?C?C₆H₅ ( 6 ) and C?C?C₆H₄N(C₆H₅)‐p ( 7 ). Single crystal X‐ray diffraction studies of all the complexes except 7 were performed to further corroborate their chemical identity. Thermogravimetric analysis (TGA) studies of the uncommon cis configured aryl alkyne complex 7 confirmed the high stability of this complex. Detailed photophysical investigations carried out in solution at room temperature, at 77 K (2‐MeTHF) in rigidified media, solid state and 5 wt % PMMA revealed the phosphorescent nature of emission in these complexes. Additionally, their behavior was found to be governed based on both the nature of the cyclometalated ligand and the electronic properties of the ancillary ligands. Highly efficient interligand charge transfer in complex 7 provides access to a wide range of emission colors (solvent‐dependent) from deep blue to red with phosphorescence emission quantum yield of 30 % (441 nm) and 39 % (622 nm) in solution and solid state, respectively, and is the highest reported for any Au^III complexes. DFT and TDDFT calculations carried out further validated the observations and assignments based on the photophysical experimental findings.