A novel inorganic–organic nanohybrid material SBA-15@triazine/H<Subscript>5</Subscript>PW<Subscript>10</Subscript>V<Subscript>2</Subscript>O<Subscript>40</Subscript> as efficient catalyst for the one-pot multicomponent synthesis of multisubstituted pyridines

A novel inorganic–organic nanohybrid material SBA-15@triazine/H₅PW₁₀V₂O₄₀ (SBA-15@ADMPT/H₅PW₁₀V₂O₄₀) was prepared and used as an efficient, eco-friendly, and highly recyclable catalyst for the one-pot multicomponent synthesis of multisubstituted pyridines from the reaction of aldehydes, cyclic ketones, malononitrile, and ammonium acetate with good to excellent yields (77–97%). The nanohybrid catalyst was prepared by the chemical anchoring of Keggin heteropolyacid H₅PW₁₀V₂O₄₀ onto the surface of SBA-15 mesoporous silica modified with 2-APTS -4,6-bis(3,5-dimethyl-1H-pyrazol-1-yl)-1,3,5-triazine (ADMPT) linker. Standard characterization data such as FT-IR, XRD, SEM, TEM, BET, EDX, and DTA-TGA spectroscopy confirmed that the heteropolyacid H₅PW₁₀V₂O₄₀ is well dispersed on the surface of the solid support and its structure is preserved after immobilization on the SBA-15 mesoporous silica modified with ADMPT. Furthermore, the nanocatalyst can be recovered easily and reused five times without considerable loss of catalytic activity. In general, these advantages highlight this protocol as an attractive and useful methodology, among the other methods reported in the literature, for the eco-friendly and rapid synthesis of biologically active multisubstituted pyridines.     

Efficient synthesis of xanthenedione derivatives using cesium salt of phosphotungstic acid as a heterogeneous and reusable catalyst in water

Cs_2.5H_0.5PW₁₂O₄₀ has been reported to be an efficient catalyst for the synthesis of 1,8-dioxo-octahydroxanthene from aldehydes and 1,3-cyclohexanedione/dimedone in water. This approach is environmentally benign with clean synthetic procedure, short reaction time, easy workup procedure, excellent yield, and regeneration of catalyst, which made this protocol efficient and safe.     

Fe3O4@SiO2@ADMPT/H6P2W18O62: a novel Wells–Dawson heteropolyacid-based magnetic inorganic–organic nanohybrid material as potent Lewis acid catalyst for the efficient synthesis of 1,4-dihydopyridines

A novel Wells–Dawson heteropolyacid-based magnetic Inorganic–organic nanohybrid, Fe₃O₄@SiO₂@ADMPT/H₆P₂W₁₈O₆₂, was fabricated and used as a green, efficient, eco-friendly, and highly recyclable catalyst for the one-pot and multi-component synthesis of 1,4-Dihydopyridine (1,4-DHP) derivatives from the reaction of various aromatic aldehydes with ethyl acetoacetate and ammonium acetate with good to excellent yields and in a short span of time. The nanohybrid catalyst was prepared by the chemical anchoring of Wells–Dawson heteropolyacid H₆P₂W₁₈O₆₂ onto the surface of functionalized Fe₃O₄ nanoparticles with 2,4-bis(3,5-dimethylpyrazol)-triazine (ADMPT) linker. These nanocatalysts were identified by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), infrared spectroscopy (IR) and vibrating sample magnetometer (VSM). This protocol is developed as a safe, cost-effective and convenient alternate method for the synthesis of 1,4-DHP derivatives utilizing an eco-friendly, and a highly reusable catalyst.     

Microwave-promoted efficient conversion of acetophenones to 1,3,5-triarylbenzenes catalyzed by H3PW12O40 and nano-silica supported H3PW12O40 as reusable catalysts

H₃PW₁₂O₄₀ and nano-silica supported H₃PW₁₂O₄₀ were found to be efficient heterogeneous catalysts for the preparation of 1,3,5-triarylbenzenes via triple self condensation of acetophenones under microwave irradiation and solvent-free conditions. High yields, short reaction times, easy work-up, easy availability and handling, eco-friendly and reusability of the catalysts are the main aspects of the present method. The catalytic mechanism of 1,3,5-triarylbenzenes synthesis is also proposed.     

Keggin-type Bronsted dodecatungstophosphoric acid: a quasi homogenous and reusable catalyst system for liquid phase Beckmann rearrangement

A variety of ketoximes, prepared from corresponding ketones, undergo Beckmann rearrangement using H₃PW₁₂O₄₀ (DTPA) in acetonitrile under reflux to yield N-substituted amides and lactams in good to excellent yields (72–96%). The present method provides an efficient, clean, eco-friendly, and simple synthesis. The catalyst is cheap, moisture tolerant, recoverable, and reusable without much loss of its activity.     

Photocatalytic oxidation of primary and secondary benzylic alcohols to carbonyl compounds catalyzed by H3PW12O40/SiO2 under an O2 atmosphere

An efficient, selective and green procedure for the photocatalytic oxidation of primary and secondary benzylic alcohols to the corresponding aldehydes and ketones has been achieved using silica-encapsulated H₃PW₁₂O₄₀ as a recyclable heterogeneous photocatalyst in acetonitrile under oxygen gas as the sole reoxidant of the catalyst.     

(NH4)3PW12O40 as an Efficient and Reusable Catalyst for the Synthesis and Deprotection of 1,1‐Diacetates

An efficient method for the synthesis of 1,1‐diacetates (acylals) from different aldehydes in the presence of (NH₄)₃PW₁₂O₄₀ and acetic anhydride under solvent‐free conditions at ambient temperature is achieved. Selective conversion of aldehydes was observed in the presence of ketones. The deprotection of acylals has also been achieved using (NH₄)₃PW₁₂O₄₀ in methanol. The catalyst was found to possess good activity and considerable level of reusability.     

A simple conversion of azlactones into indenones via H3PW12O40/Al2O3 catalyzed intramolecular Friedel-Crafts reaction

A rapid and simple procedure for the synthesis of the indenone derivatives, N-(1-oxo-1H-inden-2-yl)benzamides, via intramolecular Friedel-Crafts (IFC) reaction of (Z)-4-arylidene-2-phenyl-5(4)-oxazolones (azlactones) catalyzed by H₃PW₁₂O₄₀ supported on neutral alumina under microwave irradiation has been developed. The reaction is straightforward and allows easy isolation of the product. The catalyst could be re-used up to four times after simple filtration.     

Convenient synthesis of polysubstituted pyrroles and symmetrical and unsymmetrical bis-pyrroles catalyzed by H3PW12O40

A mild and environmentally-benign protocol for the efficient synthesis of polysubstituted pyrroles via a one-pot three-component reaction of amines, α-bromo ketones and dialkyl acetylenedicarboxylate using H₃PW₁₂O₄₀ as a recyclable heterogeneous catalyst under solvent-free conditions at room temperature is reported. Importantly, the synthesis of symmetrical and unsymmetrical polysubstituted bis-pyrroles has been performed in good yields for the first time, which can be considered as a salient feature of this protocol.     

负载型P-Mo-V/SBA-15催化剂上的甲烷选择氧化反应

以磷钼钒杂多酸(H₅PMo₁₀V₂O₄₀)为前驱体、介孔SBA-15为载体, 采用浸渍法制备不同负载量的P-Mo-V氧化物催化剂. 在甲烷选择氧化反应中, 考察了负载量、反应温度、空速等对甲烷转化率和产物选择性的影响. 结果表明, 催化剂对甲烷选择氧化制甲醛具有较高活性, 甲烷转化率随负载量的增大和反应温度的升高而提高, 甲醛的选择性随负载量的增大先升后降. 反应温度为640 ℃、空速为48300 L•kg^－1•h^－1、氧化物负载量w＝2.89%时, 甲醛的时空产率最高(295 g•kg_cat^－1•h^－1). 多种表征表明, 氧化物负载量w≤2.89%时, P-Mo-V氧化物在载体介孔孔道内以高分散形式存在. 催化剂的酸性和氧化还原性质与负载量相关, NH₃-TPD和H₂-TPR的测试结果表明, 较弱的酸性位和较低还原温度的活性组分有利于甲烷选择氧化制甲醛.     

H6P2W18O62·18H2O–Catalyzed,Three-Component,One-Pot Synthesis of Indeno[1,2-b]quinoline-7-one Derivatives

In this work, a rapid and efficient one-pot method for the synthesis of indeno[1,2-b]quinoline-7-one derivatives by condensation of 1-naphthylamine, 1,3-indanedione, and different aldehydes in the presence of H₆P₂W₁₈O₆₂·18H₂O as a green and reusable catalyst in refluxing acetic acid is described.     

A facile approach for the synthesis of 14-aryl- or alkyl-14H-dibenzo[a,j]xanthenes under solvent-free condition

A facile, efficient and environment-friendly protocol for the synthesis of 14-aryl- or alkyl-14H-dibenzo[a,j]xanthenes has been developed by one-pot condensation of 2-naphthol with aliphatic and aromatic aldehydes in the presence of P₂O₅ or InCl₃ as catalysts under solvent-free conditions. The present approach offers the advantages of clean reaction, simple methodology, short reaction time, high yield, easy purification, and economic availability of the catalyst.     

Dodecatungstophosphoric Acid (H3PW12O40): A Novel and Efficient Recyclable Catalyst for Synthesis of 1,1‐Diacetates from Aromatic Aldehydes in Solvent‐Free System and Their Deprotection

A facile and efficient method for the formation of 1,1‐diacetates from a variety of aldehydes in the presence of a catalytic amount of H₃PW₁₂O₄₀ and acetic anhydride was achieved in good yields at room temperature. The deprotection of the resulting acylals is achieved using the same catalyst in acetone.     

An efficient synthesis of quinolines under solvent-free conditions

An efficient synthesis of substituted quinolines has been achieved in a one-pot reaction from o-nitrobenzaldehyde and enolizable ketones using SnCl₂·2H₂O as the reductant under microwave irradiation without any solvent or catalyst     

Efficient and green synthesis of 4H-pyran derivatives under ultrasound irradiation in the presence of K2CO3 supported on acidic montmorillonite

Acid-treated montmorillonite coating with K₂CO₃ is used as a catalyst for an efficient, rapid, one-pot synthesis of 4H-pyran derivatives in good yield under ultrasonic irradiation. The catalyst is environmentally benign, easy handling, nontoxic, stable in air, and inexpensive.     

Cs取代对Ni-H3PW12O40/SiO2催化剂结构性质和催化性能的影响

采用两步浸渍法和载体上的原位反应制备了一系列Cs部分取代的Ni-Cs_xH_3-xPW₁₂O₄₀/SiO₂催化剂,并用N₂吸附比表面积测定(BET)、电感耦合等离子体发射光谱(ICP)、X射线衍射(XRD)、拉曼光谱(Raman)、原位X射线衍射(in situ XRD)、NH₃程序升温脱附(NH₃-TPD)、H₂程序升温还原(H₂-TPR)、H₂程序升温脱附(H₂-TPD)、吡啶吸附傅里叶变换红外(FTIR)光谱等分析测试技术对催化剂进行了表征. 以正癸烷为模型化合物,对催化剂的加氢裂化性能进行了评价. 结果表明,8%Ni-50%Cs_1.5H_1.5PW/SiO₂催化剂具有最高的C₅₊收率,明显优于8%Ni-50%H₃PW/SiO₂催化剂和工业催化剂. 随着Cs 在Cs_xH_3-xPW中比例的增加,正癸烷的转化率逐渐降低,而C₅₊选择性则逐渐提高. 当催化剂具有合适的孔径时,选择性的提高是由于催化剂酸性的减弱,而转化率的降低则是由于催化剂加氢能力的减弱.     

金复合介孔SBA-15吸附血红蛋白在H2O2电催化反应中的应用

以P123嵌段共聚物表面活性剂为模板剂制备介孔氧化硅SBA-15,并用沉积-沉淀(DP)法在SBA-15介孔表面负载纳米Au颗粒制备得到金复合介孔SBA-15材料(Au-SBA-15).再以Au-SBA-15材料制备玻碳修饰电极,将血红蛋白固定于修饰电极上用循环伏安法考察其对不同浓度H2O2溶液的电催化反应.在固定了血红蛋白的Hb/Au-SBA-15/GC修饰电极上,H2O2在+0.95 V处出现了氧化峰,且随着H2O2浓度的增大峰电流不断增加,说明金复合介孔氧化硅材料具有良好的生物兼容性,有利于血红蛋白的固定,其修饰电极对H2O2溶液具有一定的电催化作用.     

Fe3O4@SiO2–NH2 core-shell nanocomposite as an efficient and green catalyst for the multi-component synthesis of highly substituted chromeno[2,3-b]pyridines in aqueous ethanol media

ABSTRACT

An efficient and green approach for synthesizing chromeno[2,3-b]pyridine derivatives through one-pot three-component reactions of salicylaldehydes, thiols, and malononitrile has been developed by Fe₃O₄@SiO₂–NH₂ nanocatalyst in aqueous ethanol media under re?ux conditions. The present procedure provides several advantages such as environmentally benign, straightforward, excellent yields, short reaction times, cost-effective, good recyclability, little catalyst loading, and facile catalyst separation for the preparation of chromeno[2,3-b]pyridines as important privileged medicinal scaffold. In addition, aminopropyl-coated Fe₃O₄@SiO₂ nanoparticles were fully characterized by scanning electron microscopy, X-ray diffraction, energy dispersive analysis of X-ray, vibrating sample magnetometer, and FT-IR analysis.     

Sonochemical synthesis of chromenes catalyzed by L-phenyl alanine-attached nano-Fe3O4@SiO2

An efficient multi-component synthesis of 10,10-dimethyl-7-(phenyl)-10,11-dihydrochromeno[4,3-b]chromene-6,8(7H,9H)-diones is described by a one-pot condensation reaction of aldehydes, dimedone and 4-hydroxycoumarin using L-phenyl alanine tethered to nano-Fe₃O₄@SiO₂ under ultrasonic irradiation. The catalyst has been characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), scanning electron microscope (SEM), Energy-dispersive X-ray spectroscopy (EDX), thermal gravimetric analysis (TGA) and vibrating-sample magnetometer (VSM). Atom economy, wide range of products, high catalytic activity, excellent yields in short reaction times, reusability of the catalyst and low catalyst loading are some of the important features of this protocol.     

Synthesis of one-pot pyrazolo[4′,3′:5,6]pyrano[2,3-c]phenazin-15-yl) methanone derivatives via a multi-component using Fe3O4@TiO2-SO3H as a recoverable magnetic catalyst under microwave irradiation

ABSTRACT

A new one-pot method for the synthesis four-component of pyrazolo[4′,3′:5,6]pyrano[2,3-c]phenazin-15-yl)methanone derivatives has been developed in the presence of nano Fe₃O₄@TiO₂-SO₃H catalysts (heterogeneous acid) under microwave conditions and in a solvent-free environment at 180?W. One of the benefits of using this catalyst was its re-use in subsequent stages of its reaction without much loss in its activity, which was carried out by an external magnet and recovered. The catalyst was synthesized and characterized by XRD, EDX, TEM, FESEM, TGA-DTA, BET, VSM and AFM. The productivity of the products obtained from this protocol (MAOS) is significantly high and the shorter reaction time in the synthesis process over the reflux method. These results showed advantages for synthesis, such as mild reaction conditions, no use of toxic catalysts in the laboratory, solvent-free environment, low energy consumption and Economically Affordable.