The synthesis and application of fluorous boronates without perfluorinated solvents

The synthesis of a fluorous diol 4 bearing a perfluorodecyl chain was described. A series of boronic acid were attached to 4 by esterification. The purification of the products was fulfilled by facile filtration instead of expensive and environmental troublesome fluorous liquid-liquid extraction. The Suzuki cross-coupling reactions of the formed fluorous boronates 5 underwent smoothly and the fluorous diol 4 was recycled in good yields.     

Total synthesis of macrocyclic glycosides, clemochinenosides A and B, and berchemolide, by fluorous mixture synthesis

The total synthesis of clemochinenoside A and the first total syntheses of clemochinenoside B and berchemolide were achieved simultaneously via macrocyclization of 4-O-(4-O-^F13benzyl-β-d-glucopyranosyl)syringic acid with 4-O-(4-O-^F17benzyl-β-d-glucopyranosyl)vanillic acid by a fluorous mixture synthetic method. The spectroscopic data of the synthetic products were identical with those of the natural products, although the optical rotation of clemochinenoside A differed from the published values in sign and magnitude.     

Evaluation of novel amylose and cellulose-based chiral stationary phases for the stereoisomer separation of flavanones by means of nano-liquid chromatography

Three polysaccharide-based chiral stationary phases, Sepapak^® 1, Sepapak^® 2 and Sepapak^® 3 have been evaluated in the present work for the stereoisomer separation of a group of 12 flavonoids including flavanones (flavanone, 4′-methoxyflavanone, 6-methoxyflavanone, 7-methoxyflavanone, 2′-hydroxyflavanone, 4′-hydroxyflavanone, 6-hydroxyflavanone, 7-hydroxyflavanone, hesperetin, naringenin) and flavanone glycosides (hesperidin, naringin) by nano-liquid chromatography (nano-LC). The behaviour of these chiral stationary phases (CSPs) towards the selected compounds was studied in capillary columns (100 μm internal diameter (i.d.)) packed with the above mentioned CSPs using polar organic, reversed and normal elution modes. The influence of nature and composition of the mobile phase in terms of concentration and type of organic modifier, buffer type and water content (reversed phase elution mode) on the enantioresolution (R_s), retention factor (k) and enantioselectivity (α) was evaluated. Sepapak^® 3 showed the best chromatographic results in terms of enantioresolution, enantioselectivity and short analysis time, employing a polar organic phase mode. A mixture of methanol/isopropanol (20/80, v/v) as mobile phase enabled the chiral separation of eight flavanones with enantioresolution factor (R_s) in the range 1.15–4.18. The same analytes were also resolved employing reversed and normal phase modes with mixtures of methanol/water and hexane/ethanol at different ratios as mobile phases, respectively. Loss in resolution for some compounds, broaden peaks and longer analysis times were observed with these last two chromatographic elution modes.     

Total synthesis of cucurbitoside A using a novel fluorous protecting group

The first total synthesis of cucurbitoside A was achieved using a new fluorous N-phenylcarbamoyl (^FCar) protecting group. The ^FCar group was introduced into carbohydrates in high yield and was selectively removed with Bu₄NNO₂ without damaging other acyl protecting groups. The synthetic intermediates were easily isolated by fluorous solid-phase extraction.     

Fluorous chiral bisoxazolines. Synthesis and applications to an asymmetric allylic alkylation

The easily accessible fluorous bisoxazolines 3a-b bearing two fluorous ponytails are efficient ligands in the palladium-catalyzed asymmetric allylic alkylation of 1,3-diphenylprop-2-enyl acetate with carbonucleophiles in benzotrifluoride or CH₂Cl₂, enantioselectivities of up to 95% being obtained. The ligand is easily separated from the reaction mixture by simple extraction with a fluorous solvent.     

Simultaneous preparation of four truncated analogues of discodermolide by fluorous mixture synthesis

[structure: see text] Four truncated analogues of the natural product discodermolide were synthesized in a single synthetic sequence. Precursors bearing four different groups at C22, each with a unique fluorous p-methoxybenzyl substituent on the C17 hydroxy group, were mixed and taken through an nine-step sequence. Demixing by fluorous chromatography followed by deprotection and purification provided the individual analogues in 3-7% overall yields and with a savings of 24 synthetic steps. Fluorous mixture synthesis is recommended as a new technique to make multiple natural product analogues in a single multistep synthesis.     

Towards oligosaccharide library synthesis by fluorous mixture method

The synthesis of an oligosaccharide library by a fluorous tag method is reported here. Several acceptors and donors were mixed and glycosylated. The reaction mixture was purified by chromatography over fluorous HPLC to provide disaccharides in order of increasing fluorine content of the tag. This method could be applied to oligosaccharide libraries consisting of two sets of structural isomers.     

An expeditious synthesis of bistratamide H using a new fluorous protecting group

A total synthesis of bistratamide H has been achieved using a new ‘highly’ fluorous amino protecting group, tris(perfluorodecyl)silylethoxylcarbonyl (^FTeoc) group. The synthetic intermediates were easily isolated by liquid-liquid extraction with fluorous solvent. The fluorous protecting group was demonstrated to be recycled.     

A concise enantioselective synthesis of a fully oxygen substituted ring A taxol precursor

A concise synthesis of the oxygen substituted ring A compound 2 found in Taxol^®1a and Taxotere^®1b starting from 2,2-dimethylcyclohexane-1,3-dione and proceeding via the key intermediates 8 and 11, is described. The absolute configuration of 2 was established from an X-ray crystal structure determination of a 4-bromophenylbenzoate derivative, viz. 15.     

Solution-phase parallel synthesis with oligoethylene glycol sorting tags. Preparation of all four stereoisomers of the hydroxybutenolide fragment of murisolin and related acetogenins

The principles of the oligoethylene glycol (OEG) mixture synthesis are illustrated with the synthesis of all four possible stereoisomers of a hydroxybutenolide fragment common to murisolin and many other acetogenins. Modified dimethoxybenzyl groups with varying numbers of OEG units (-CH2CH2O-) are used to protect alcohols and serve as codes for configurations at two stereocenters. The encoded isomers are carried through several steps in a sequence of mixing prior to the reaction and then demixing during the separation to give individual pure products. A new tagging scheme is introduced in which a stereocenter bearing a hydroxy group is given two different tags. These initially redundant tags then serve to encode the configuration of another (untagged) stereocenter by appropriate pairwise reactions of the tagged precursors. The experimental features (reaction, analysis, separation, and characterization) of OEG mixture synthesis are detailed and are compared to and contrasted with those of fluorous mixture synthesis.     

Aspects of the thermal and photostabilisation of high styrene-butadiene copolymer (SBC)

The thermal and photo-oxidative stabilisation of high styrene-butadiene copolymer (SBC) with high styrene content (K-Resin) has been studied using a variety of analytical and spectroscopic methods including yellowness, luminescence and FT-IR spectroscopy coupled with hydroperoxide analysis in order to understand the nature and effectiveness of the processes involved. The next stage of the program was to evaluate the effects of various chemical/solvent treatments on the role of metal ions/residual catalysts and hydroperoxides in the thermal and photostabilisation of SBS as well as combinations of phenolic antioxidants and phosphites/phosphonites. Other additives, such as HALS and a metal deactivator, were also added to the combinations of phenolic and phosphite antioxidants in order to study their behaviour and efficiency. The chemical treatments appeared to stabilise SBS against thermal oxidation to a greater or lesser extent. Phosphoric acid treatment via reflux and zinc dithiocarbamate treatments showed better performances than the rest of the treatments, the latter was particularly effective at inhibiting the discolouration. During photo-oxidation, on the other hand, chemical treatments involving phosphoric acid and pre-thermal effects showed the importance of catalyst effects. The addition of phenolic antioxidants, phosphites/phosphonites, metal deactivator and HALS was found to stabilise the SBS against thermal and photo-oxidation. In thermal oxidation, the combination of Irganox^® 1010/Irgafos^® 168 was found to effectively stabilise the polymer when the finalisation of the polymerisation was with adipic acid. When the same antioxidants were used, but with polymer finalised with BHT, strong yellowing was observed and a higher amount of hydroperoxides and oxidation products. Increasing the amount of antioxidants did not increase the stabilisation efficiency. The stabilisation efficiency of Irganox^® 1010 combined with Alkanox^® P-24 was found to be more effective than when it was combined with Irgafos^® 168. The formulations containing Irgafos^® 168/Irganox^® 1010 and Irgafos^® 168/Irganos^® 1330 were more effective in colour protection and retarding the formation of oxidation products than the combinations of Irgafos^® 168/Irganox^® 3114 and Irgafos^® 168/Lowinox^® 1790. The effect of the addition of HALS, such as Tinuvin^® 770, Tinuvin^® 622 and Chimassorb^® 944, and a metal deactivator, such as Irganox^® MD 1024, to the combination of Irgafos^® 168/Irganox^® 1010 was found to be antagonistic. In photo-oxidation, a combination of Irganox^® 1010/Irgafos^® 168 protected the polymer efficiently, when the polymerisation of the polymer was finalised with adipic acid. When the polymerisation was finalised with BHT, a higher amount of hydroperoxides and oxidation products was found. An increase in the amount of antioxidants did not enhance the stability of the polymer. The addition of Alkanox^® P-24 exhibited an opposite effect to that seen in thermal oxidation, as the stabilisation efficiency was less effective than with Irgafos^® 168. The formulation containing Irgafos^® 168/Irganox^® 1010 was found to be the most efficient compared with the other phenolic antioxidants. The addition of Tinuvin^® 770 to the formulation Irgafos^® 168/Irganox^® 1010 was found to have a synergistic effect. The addition of polymeric HALS or Irganox^® MD 1024, a metal deactivator, had an antagonistic effect on the stabilisation of the polymer. Disruption of the excimer sites in the styrenic phase also correlated with stabilisation effects.     

Asymmetric epoxidation of cis-alkenes with arabinose-derived ketones: enantioselective synthesis of the side chain of Taxol

The ee values of asymmetric epoxidation of cis-ethyl cinnamate 15 with arabinose-derived ketones as catalyst and Oxone^® as the terminal oxidant were found to increase inversely with the size of the catalyst acetal blocking group. Ketone catalyst 2, with the least bulky methoxy acetal group, displayed the best enantioselectivity and afforded ethyl (2R,3R)-3-phenylglycidate 16 in 68% ee. Epoxide 16 was readily converted into a protected side chain of Taxol^® in five steps with an overall yield of 89%. The enantioselectivity of the epoxidation of other cis-alkenes was moderate to poor.     

Structure assignment of lagunapyrone B by fluorous mixture synthesis of four candidate stereoisomers

Techniques of fluorous mixture synthesis have been used to make four candidate stereoisomers for the natural product lagunapyrone B. A quasiracemic mixture of vinyl iodides whose component configurations at C19-21 were encoded by fluorous silyl groups was fused to a central fragment by a Negishi coupling. A separate quasiracemic mixture of pyrone fragments whose component configurations at C6,7 were also encoded by fluorous silyl groups was synthesized and demixed. Stille coupling of the resulting pure quasienantiomers with the quasiracemic mixture provided two quasi-diastereomeric samples, which were demixed and detagged to provide all four lagunapyrone B stereoisomers. Lagunapyrone was assigned the 6R,7S,19S,20S,21R configuration by comparison of optical rotations.     

A polystyrene-supported triflating reagent for the synthesis of aryl triflates

An insoluble polystyrene-supported triflating reagent has been prepared by suspension co-polymerization of N-(4-vinylphenyl)trifluoromethanesulphonimide, styrene and the JandaJel^® cross-linker. This reagent, in the presence of triethylamine, allows for the efficient synthesis of aryl triflates from a wide range of phenols in a process that permits the desired product to be isolated from the reaction mixture in essentially pure form via several filtration and concentration operations. Adding to the utility of this reagent is its ability to be easily recovered, regenerated and reused. Both soluble and insoluble bifunctional polymers containing trialkylamine moieties in addition to triflimide groups were also prepared and examined as triflating reagents. Unfortunately these reagents afforded only modest yields of the desired products in representative reactions.     

Synthesis and characterization of well‐defined polystyrene and poly(ε‐caprolactone) hetero eight‐shaped copolymers

Well‐defined hetero eight‐shaped copolymers composed of polystyrene (PS) and poly(ε‐caprolactone) (PCL) with controlled molecular weight and narrow molecular weight distribution were successfully synthesized by the combination of ring‐opening polymerization, ATRP, and “click” reaction. The synthetic procedure involves three steps: (1) preparation of a tetrafunctional PS and PCL star copolymer with two PS and two PCL arms using the tetrafunctional initiator bearing two hydroxyl groups and two bromo groups; (2) synthesis of tetrafunctional star copolymer, (α‐acetylene‐PCL)₂(ω‐azido‐PS)₂, by the transition of terminal hydroxyl and bromo groups to acetylene and azido groups through the reaction with 4‐propargyloxybutanedioyl chloride and NaN₃ respectively; (3) intramolecular cyclization reaction to produce the hetero eight‐shaped copolymers using “click” chemistry under high dilution. The ¹H NMR, FTIR, and gel permeation chromatography techniques were applied to characterize the chemical structures of the resulted intermediates and the target polymers. Their thermal behavior was investigated by DSC, and their crystallization behaviors of PCL were studied by polarized optical microscopy. The decrease in chain mobility of the eight‐shaped copolymers restricts the crystallization of PCL and the crystallization rate of PCL is slower in comparison with their corresponding star precursors. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6496–6508, 2008     

Characterization of Sideritis clandestina subsp. peloponnesiaca Polar Glycosides and Phytochemical Comparison to Other Mountain Tea Populations

Sideritis clandestina (Bory & Chaub.) Hayek subsp. peloponnesiaca (Boiss. & Heldr.) Baden (SCP) is endemic to the mountains of the Northern Peloponnese (Greece). This and other Sideritis taxa, collectively known as mountain tea, are widely ingested as beverages for refreshment or medicinal purposes. We describe a methodology for the characterization of SCP. Four iridoid glycosides (monomelittoside, melittoside, ajugoside, and 7-O-acetyl-8-epiloganic acid), two phenolic acid glycosides (vanillic and salicylic acid glycosides), and three caffeoyl ester glycosides (chlorogenic acid, verbascoside, and isoverbascoside) were isolated from SCP for the first time. We used ultrasound-assisted extraction of 3 g of plant material to produce petroleum ether and aqueous extracts, which we then analyzed using GC/MS and LC/MS. This was applied to eight samples from four different taxa. In total, 70 volatile and 27 polar metabolites were determined. The S. clandestina samples had a lower phenolic content and weaker antioxidant properties than S. raeseri and S. scardica. However, S. clandestina ssp. clandestina seemed to be the most aromatic taxon, with almost double the number of volatiles as the others. Τhis study could contribute to authentication and chemotaxonomic studies of Sideritis taxa.     

Ru 前驱体对 Ru/MgO-CeO2 氨合成催化剂性能的影响

 分别以 K₂RuO₄, Ru(Ac)₃ 和 RuCl₃ 为 Ru 前驱体, 制备了 Ru/MgO-CeO₂ 催化剂, 并运用 X 射线衍射、X 射线荧光光谱, CO 吸附、N₂ 物理吸附和 H₂程序升温还原等技术对催化剂进行了表征, 考察了 Ru 前驱体对 Ru/MgO-CeO₂ 催化剂氨合成性能的影响. 结果表明, Ru 前驱体对载体 MgO-CeO₂ 和 Ru 的还原性能、氯残留量和催化剂比表面积的影响都很大, 从而导致催化剂的氨合成性能的不同. 其中以 K₂RuO₄ 为 Ru 前驱体制备的催化剂的载体和 Ru 容易还原, 无氯离子, 且比表面积较高, 因而催化剂活性和氨合成转换频率较高. 在 10 MPa, 425 °C, 10 000 h^-1 条件下, K₂RuO₄, Ru(Ac)₃ 和 RuCl₃ 作前驱体制备的催化剂上氨合成转换频率比为 1.33:1.05:1.     

Synthesis of porphyrins bearing uracyl groups and their assembly induced by melamine derivatives

Self‐assembled porphyrins via noncovalent bonding have attracted wide‐ranging researchers in material science. We reported herein the synthesis of the tetraphenyl porphyrin derivatives bearing uracyl groups as acceptor–donor–acceptor (ADA) type hydrogen bonding units, through the condensation of 5,10‐ or 5,15‐bis (3‐amino‐4‐ethylhexylphenyl) porphyrin derivatives with 6‐carboxyuracyl derivatives. When two porphyrins having uracyl groups at the different substituted positions were respectively mixed with a melamine derivative in benzene, ¹H NMR spectra showed that the 5,15 substituted uracyl porphyrin formed a hydrogen‐bonded suprastructure with the melamine derivative as a complementary molecule to the uracyl moiety, although the other 5,10‐substituted uracylporphyrin could not form such a structure. The SEM observation indicated that the mixture with the 5,15‐substituted uracyl porphyrin and the melamine with long alkyl chains formed a sheet‐like structure. Copyright © 2007 John Wiley & Sons, Ltd.     

New polyfunctional dendritic linear hybrids from terminal amine polyether oligomers (Jeffamine): synthesis and characterization

New dendritic polyether oligomers were synthesized from three different Jeffamines^® and characterized. This class of polyfunctional oligomers, bearing on their surface methylester, carboxylic acid, nitrile or amine groups, could be interesting modifying agents to change the properties of materials. The optimization of the iterative synthetic methods, through Michael addition, hydrolysis or hydrogenation, gave first and second generation dendritic structures in good yields.     

New polynuclear cobalt trimethylacetate complexes: synthesis and structure

Extraction of polymer (1), formed in the reaction of CoCl₂ with KOOCBu^t, with boiling hexane gives crystals of hexamer Co₆(μ₃-OH)₂(OOCBu¹)₁₀(HOOCBu¹)₄ (2). According to data of X-ray study, four Co¹¹ atoms in the hexanuclear molecule2 have an octahedral ligand environment and two Co¹¹ atoms have a tetrahedral one. Dissolution of polymer1 in EtOH results in its splitting into Co₄(μ₃-OH)₂(OOCBu¹)₆(HOEt)₆ tetramers (3). In molecule3, two asymmetric dimeric (η²-OOCBu^t)(EtOH)Co(μ-OOCBu^t)Co(HOEt)₂ fragments are bound by two tridentate bridging OH groups. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1773–1778, September, 1999.