Adsorption of polar substances from binary and ternary mixtures on silica gel

The adsorption isotherms of acetone and methyl ethyl ketone from binary and ternary mixtures in benzene and n-heptane on silica gel were measured. The experimental adsorption data are discussed on the basis of changes of the composition of mixed solvent (benzene + n-heptane) in ternary mixtures. It has been found that the different structures of the surface phase correspond to the system investigated. The marked dependence of the adsorption on the solvent character is demonstrated. For benzene and ternary (ketone + benzene + n-heptane) mixtures a mixed character of the surface phase is observed whose composition is determined by competition of liquid components for silica surface as well as its tendency to complex. Bilayer model of the surface phase gives a good representation of the experimental data for binary systems benzene + ketone.     

The structure of adsorbed films of some aliphatic compounds at the water/air interface

Electric surface potential (V) and surface tension measurements of aqueous solutions of some aliphatic compounds were used to determine the surface activity, orientation of molecules at the water/air interface, effective dipole moments (connected with water molecules, hydrophilic and hydrophobic groups), and local dielectric permittivities of the surface layer.     

Formation of the surface charge on silica in mixed solvents

At sufficiently high concentrations of methanol and of alkali salts in aqueous silica dispersions, the negative -potentials of the particles are decreased. This effect is more pronounced with lithium than with other alkali cations, and it is independent on the anion. The NMR spectra indicate lithium adsorption on silica from mixed solvents, but not in the absence of alcohol.Supported by a contract with the XMX Corporation, Burlington, Massachusetts, USA     

Simulation of a monolayer adsorbed on a heterogeneous surface: effect of the size and shape of the adsorbate on the structure of the interface and the distribution of the adsorption energies

At the low temperature limit, the effect on the size and shape factors of the adsorbate molecule is shown in a simulation of a monomolecular phase adsorbed on a heterogeneous surface. This factor is reflected both in the theoretical distribution of the adsorption energies and the packing of the adsorbed phase.     

Behavior of pure and mixed DPPC liposomes spread or adsorbed at the air-water interface

Liposomes from pure dipalmitoylphosphatidylcholine (DPPC) and mixed DPPC: distearoylphosphatidylcholine (DSPC): soybean lecithin (SL) prepared by the Bangham method with sonication were dispersed into solution or spread at the interface and the kinetics of the surface film formation was studied by measuring and recording the evolution of superficial tension, surface potential, and superficial (¹⁴C labeled) DPPC density.A simple theoretical approach can describe these kinetics by two processes: irreversible diffusion of closed vesicles into or from the bulk phase, and irrevers ible transformation of closed spherical vesicles into destroyed ones which form the surface film. Diffusion controls the phenomenon for small initial amounts of liposomes.Transformation controls the phenomenon for important initial amounts of liposomes. The kinetic constant of the transformation,K, does not depend on the technique used to form the surface film (spreading or adsorption).The equilibrium and rheological properties of surface films formed after liposome spreading are compared to those of monolayers     

Water vapor adsorption and capillary reactions of silicates

States of disperse silicate systems classified according to their fundamental morphological types were represented by a ternary diagram. Water vapor equilibria of various silicate samples were investigated by energy levels, by equivalent pore number of potential bands determined from adsorption potential curves. The silicate adsorbents were characterized by adsorption energy, equipotential surface area and specific capillary. Electrical properties of adsorbents depending on their water contents were examined. Changes of adsorption properties of mechanical, thermal and by ion exchange treated silicates were observed. Electrical properties of adsorbents depending on their humidity were examined. Capillary reactions were observed causing irreversible adsorption-desorption cycles.     

Coagulation kinetics of amorphous colloidal silica suspensions with and without hydroxypropyl cellulose polymer

The coagulation rate constant of submicron silica has been measured as a function of solution pH, salt concentration and hydroxypropyl cellulose (HPC) polymer concentration. Results show that the colloidal stability of silica is dominated by the cation concentration in the presence of salt in the pH range 3–9.5. The stability increases as cation concentration decreases. At low salt concentration and a minimum colloid stability was found in the intermediate pH range 4–8. These results show that differences in the literature values of the critical coagulation constant by relative light-scattering experiments can be explained by the use of the coagulation rate constant analysis. When HPC polymer was present in the solution, the colloid stability of the silica increased. The adsorption of polymer stabilizes the silica suspensions, both at low pH near the isoelectric point and at high ionic strength where it coagulates without the polymer. A monolayer coverage was necessary to provide steric stabilization. At 10^–3 M KCl a smaller equilibrium concentration of HPC in solution is needed to give monolayer coverage and steric stabilization than at 1 M KCl and pH 4.2.     

Interaction between amphiphiles and water molecules in concentrated bilayer aqueous colloids

Interaction between amphiphiles and water molecules in micelle or bilayer structure has been investigated using aqueous colloids of various amphiphiles through the rheological data and the spin-lattice relaxation timeT ₁ of the proton of water molecule.T ₁ of the water proton has been measured by the inversion recovery method and determined as a single exponential relaxation process.The chemical shift of the water proton is almost independent of the amphiphilic concentration; however, it shifts toward a higher magnetic field with increasing temperature in a way similar to that in pure water and in the amphiphilic aqueous systems. These facts mean that there is no significant difference in the magnetic field environment of the water protons in these systems.The water molecule is not necessarily bound in the fully developed micelle or bilayer (rod-like or lamella) structure which induces the high viscosity or high rigidity of the colloidal system. On the other hand, the water molecule is bound in the micelle colloids of amphoteric amphiphiles or amphiphiles whose molecular assembly creates a relatively strong electrostatic field. The activation entropy of the bound water is negative and this suggests that water molecules assume some ordered structure in the bound state.     

Characterization of p-hydroxybenzoic acid methylester physi- and chemiadsorbates on silica by IR and UV-spectroscopy

Physiadsorbates and chemiadsorbates of p-hydroxybenzoic acid methylester (pHBAME) on colloidal and porous silicas were studied by IR and UV spectroscopy. In the IR spectra of self-supporting discs of the adsorbates, typical features were detected which allow differentiation between the physi- and the chemiadsorbed state: a strong absorption band at 1417 cm^–1 characterizes the chemiabsorbate. Dehydration by annealing and rehydration of the adsorbates proceeded also in a different way, indicated by absorption bands both in the carbonyl group and in the ring vibration frequency range. In the UV spectra the absorption maximum of the chemiadsorbate occured at 250 nm and that of the physiadsorbate at 255.5 nm (from cyclohexane suspensions of the adsorbates).Dedicated to Prof. Dr. Paul Heinz List on the occasion of his 65^th birthday.     

Functionalization of colloidal silica and silica surfaces via silylation reactions

A series of trialkoxysilane compounds tipped with primary amine groups were used to functionalize the surfaces of glass and colloidal silica. Streaming potential and microelectrophoretic mobility measurements were used to monitor the stability of the functionalized surfaces.Hydrolytic breakdown of the surface-to-silane coupling was induced by either successively increasing and decreasing the pH of the solution in contact with the surface, or by aging the derivatised surfaces in aqueous solution over prolonged periods of time. The chemistry of the spacer units between the trialkoxysilane group and the primary amine tip had a major influence on the subsequent hydrolytic stability. Large hydrophobic spacer groups showed small changes in the electrokinetic properties on storage, but large changes when successively titrated with acid and base through the pH range. The behavior observed with small hydrophobic spacer groups was that large changes in electrokinetic properties were obtained on storage and with pH titration.     

Wetting and adsorption on organophilic illites and swelling montmorillonites in methanol-benzene mixtures

Adsorption and immersion were studied simultaneously in methanol-benzene mixtures on non-swelling organophilic illites and swelling organophilic montmorillonites. From the combination of adsroption and calorimetric data, equations were proposed for the determination of the adsorption capacity and the molar enthalpies of wetting differences, if the adsorption layer behaved ideally. From the experimental enthalpy isotherms of wetting and the enthalpy functions related to the ideal behaviour of the layer, qualitative conclusions were drawn on the excess enthalpy of the adsorpition layer. It was again established that the adsorption layer composed of alkyl chains, benzene and methanol has a regular cluster structure in certain concentration ranges, which breaks at higher methanol concentrations. This change is reflected by a significant endothermic peak of the differential molar enthalpy.For the organophilic montmorillonites, the enthalpy of swelling was determined separately as a function of the composition. The non-swelling organophilic illites were chosen as a reference system.Dedicated to Professor Dr. Armin Weiss on the occassion of his 60th birthday.     

CPS LG 313 Phenylalkanol — adsorbates on silica as types of immobilized drugs 1. Chemiadsorption on activated silica surfaces

The chemiadsorption of phenylalkanols onto a porous silica support (d _pore 10 nm) viaSi-O-C bonds was studied. The silica support was activated prior to the alcohol adsorption by annealing or by the introduction ofSi-Cl groups. Different reaction conditions were applied, namely time, temperature, solvent and drug-support ratio. The yield of chemiadsorption was dependent on both the reaction conditions and the structure of the alcohols. Long alkyl chains, especially those with an alcohol OH-group positioned in the vicinity of bulky substituents, reduce the yield considerably. Using chlorinated silica, a reasonable yield of chemiadsorption can be obtained even at relatively low reaction temperatures.Dedicated to Professor Dr. Dr. h. c. Armin Weiss on the occassion of his 60th birthday.     

The association of urethane-polyethyleneoxide (HEUR) thickeners,as studied by NMR self-diffusion measurements

The concentration and molecular weight dependence of the self-diffusion coefficient (D _self) of associative polymers of HEUR-type in aqueous solution have been investigated using FT-PGSE-NMR technique. The idea of three-dimensional network formation as a result of aggregation of the hydrophobic end-groups of the polymer in junctions is supported through the observed dramatic lowering ofD _self with increased concentration. The network-formation efficiency depends on the polymer molecular weight as well as the hydrophobicity of the end-groups.A double logarithmic dependence of the self-diffusion coefficient versus concentration (c) has been observed:D _selfc ^–a1,a2 . The first exponent,a ₁, is valid at low concentration, <1% polymer per weight solution, and ranges from 0.5 to 1, whereas the second exponent,a ₂, describing systems of higher concentration, ranges from 2 to 2.7.     

Reversible flocculation of silica suspensions by water-soluble polymers

The possibility to concentrate, then redisperse colloidal suspensions is not only of great theoretical interest, but is also relevant to the industrial process of solid-liquid separation, which must often be followed by a redispersion stage. Up to now, these consecutive operations were unrealizable in the presence of polymers, since flocculation and adsorption were generally considered irreversible in this case. Previous studies have pointed out the occurrence of two main flocculation mechanisms: charge neutralization and interparticle bridging. The use of copolymers makes it possible to take into account these two different mechanisms together. Using this fact we prepared new copolymers of acrylamide with N-vinylimidazole via radical polymerization and characterized them by light scattering, viscometry, potentiometric titrations, and UV studies. One peculiarity of the chosen system is its dependence on pH: actually the degree of neutralization of such cationic polyelectrolytes does vary with pH, especially near the pK value. This paper shows that these copolymers may induce reversible flocculation of negatively charged suspensions, e.g., silica suspensions, by simple pH adjustment. Performances of the system were followed by various physico-chemical methods. The observed results are explained in terms of flocculation mechanisms as a function of pH.     

Studies on the electrical double layer structure at the water/air interface

Effective dipole moments (calculated from experimental data of surface tension and electric surface potential) of some homologous normal alcohols and carboxylic acid were found to vary linearly with the number of carbon atoms in the hydrocarbon chain. Values of effective dipole moments were used for the determination of the effective dipole moments of water molecules , and the dielectric permittivity of the water subphase (₁), as well as in the vicinity of the hydrophobic part of adsorbed molecule (₂). The latter was found to decrease with the increase of the hydrocarbon chain length. Knowing the effective dipole moment of surface water dipoles, the average orientation angle () of water molecules at the inteface was estimated. The calculated potential drop of water varies within the range –0.038 to –2.38 V for two extreme orientations of water dipoles at the surface.     

The adsorption process of some acetic acid derivatives at the water/air interface

The adsorption of trifluoro-, trichloro-, tribromo-, and trimethylacetic acid at the water/air interface is discussed on the basis of surface tension measurements. The process of adsorption is described by Henry's and Langmuir's isotherm equations. The obtained results allow calculation of the standard free energy of adsorption of investigated molecules and the contribution to this energy of hydrophobic groups of these molecules.     

Molecular properties of acetone and some of its chloroderivatives adsorbed at the surface of water

The relations between the electric surface potential (V) and the surface tension () of aqueous solutions of acetone, chloroacetone, 1,3-dichloroacetone, and their concentration were investigated. The vertical components of dipole moments of the above mentioned compounds were determined using the Helmholtz equation. The calculations were carried out on the basis of surface excess values, which were obtained from surface tension measurements and surface potential changes. Once the vertical component of dipole moments were found and the orientation of adsorbed molecules was assumed, the local dielectric permittivities of the surface monolayer were estimated.     

Change of water structure by solvents and polymers Part 4: Albumin-water solutions with acetylsalicylic,hydrochloric and ascorbic acid,lysine- and ammonium chloride and with dextrane and sorbit

Viscosity measurements were made in the temperature range of 10 °–40 °C. The equation= _o exp(B/(T-T _o )) was used with the parameterT ₀ as structure indicator, which is called the limiting temperature. For instance, hydrocarbons, as liquids with quasifree molecules, haveT ₀=O; water as a highly structured liquid hasT ₀= 140–150 K.The polymer investigated was ovalbumin in aqueous solution in a concentration comparable to that of blood. Acetylsalicylic acid produces a protein conformation which breaks the water structure in solution at a pH of within the in vivo region.The question of whether only the acidity determines the water structure breaking properties of the protein is investigated by acidifying albumin-water solutions with hydrochloric acid, lysine chloride and ascorbic acid. All these acids exhibit similar effects. A stronger influence is observed for ammonium chloride. Its interaction with ovalbumin produces a strong structure-breaking effect. The most powerful water structure breaker in albumin-water solutions is dextrane. In a concentration of 10 % it changes the polymer conformation so that the water structure is broken to such an extent that the solution behaves as an almost quasifree liquid withT ₀=O.     

Kinetics of adsorption and desorption of sodium alkyl sulfates to and from nylon particles

The desorption rate of surfactant ions from nylon particles was investigated at the concentrations below the critical micelle concentration by applying the stopped-flow method. A mixing cell of stopped-flow spectrophotometer was modified with platinum electrodes for electric conductivity detection. The change in electric conductivity with time in the desorption process was monitored by a memory-recorder system. The surfactants used were sodium decyl, sodium dodecyl, sodium tetradecyl, and sodium hexadecyl sulfates. The desorption rate was independent of the surfactant concentration and the rate constants were obtained by applying the first-order reaction scheme. The adsorption rate constants were estimated from the experimental desorption rate constants and equilibrium constants assuming the second-order kinetics. The desorption rate constants were determined to be 1–6 sec^–1 and the adsorption rate constants to be 2–8×10⁴ mol^–1 dm³ sec^–1; the former decreased and the latter increased with increasing number of carbon atoms in alkyl chain of the surfactants.     

On the observation of micellar structures by dielectric spectroscopy

Many cationic surfactants form, in the presence of certain organic acids, large supramolecular micellar structures in water. The dielectric response of one such system (cetyl trimethyl ammonium bromide-salicylic acid, CTMAS) has been studied as a function of frequency, concentration and temperature. The results are compared with dynamic mechanical data on the same system, which has been published in the literature.The dielectric response shows that the micelles form a rigid, open network structure, which does not impede ionic transport in the bulk liquid. However, the response also shows the presence of a frequency dispersive barrier capacitance. From the variation of the properties of this capacitance with CTMAS concentration and applied voltage over a range of frequencies, it is deduced that the barrier originates in an ordered micelle structure at each electrode.