Resistance of Pseudomonas aeruginosa to liquid disinfectants on contaminated surfaces before formation of biofilms

A comparison was made of the effectiveness of popular disinfectants (Cavicide, Cidexplus, Clorox, Exspor, Lysol, Renalin, and Wavicide) under conditions prescribed for disinfection in the respective product labels on Pseudomonas aeruginosa either in suspension or deposited onto surfaces of metallic or polymeric plastic devices. The testing also included 7 nonformulated germicidal agents (glutaraldehyde, formaldehyde, peracetic acid, hydrogen peroxide, sodium hypochlorite, phenol, and cupric ascorbate) commonly used in disinfection and decontamination. Results showed that P. aeruginosa is on average 300-fold more resistant when present on contaminated surfaces than in suspension. This increase in resistance agrees with results reported in studies of biofilms, but unexpectedly, it precedes biofilm formation. The surface to which bacteria are attached can influence the effectiveness of disinfectants. Viable bacteria attached to devices may require dislodging through more than a one-step method for detection. The data, obtained with a sensitive and quantitative test, suggest that disinfectants are less effective on contaminated surfaces than generally acknowledged.     

Theoretical and experimental aspects of microbicidal activities of hard surface disinfectants: are their label claims based on testing under field conditions?

High-touch environmental surfaces are important in the spread of many nosocomial pathogens. Although such surfaces are routinely disinfected, the testing and label claims of many common disinfectants do not reflect the realities of field use. A study was conducted to determine the influence of several crucial factors on the action of disinfectants in general, and to assess the killing efficiency of selected chemistries against Staphylococcus aureus and Pseudomonas aeruginosa, related to their drying times (i.e., after one application) and label-specified contact times using a quantitative carrier test. The products were also tested for their ability to wet a hydrophobic (epoxy resin) surface. The hard-surface disinfectants (in-use concentration in ppm) tested were: (a) chlorine bleach (500); (b) quaternary ammonium compounds (quat; 600) alone; (c) quat (3000) with 17% isopropanol (v/v); (d) quat (3000) with 60% ethanol (v/v); (e) phenolic (800) alone; (f) quat (2000), phenolic (3000) with 70% ethanol (v/v); and (g) accelerated hydrogen peroxide (AHP; 5000 of H2O2). The arbitrarily set criterion of bactericidal activity was > or = 6 log10 reduction in the viability of both species tested. All surfaces tested with all products dried in < 5 min, with alcohol-based surfaces drying significantly faster. Even though the alcohol-free quat and phenolic claim a contact time of 10 min, they dried in < 4 min after a single application and failed to meet the performance criterion. Bleach (500 ppm) dried in about 3 min and was effective. AHP also dried in about 3 min and met its label claim even at 1 min of contact. Quat (3000) with 17% isopropanol dried at 1 min and was effective. Quat (3000) with 60% ethanol and quat (2000), phenolic (3000) with 70% ethanol dried in < 1 min, and were ineffective. AHP, alcohol-containing quats, and quat-phenolic-alcohol gave acceptable wettability, while quat and phenolic alone, as well as bleach, covered the treated surface unevenly. The findings show that label claims, especially those for contact times, fail to reflect the way many hard-surface disinfectants are used in the field.     

Application of a quantitative carrier test to evaluate microbicides against mycobacteria

Microbicides for reprocessing heat-sensitive medical devices, such as flexible endoscopes, must be mycobactericidal to reduce the risk of nosocomial infections. Suspension test methods currently used for efficacy evaluation lack the stringency required for assessing inactivation of mycobacteria on surfaces. The quantitative carrier test method reported here is based on mycobacteria-contaminated reference carrier disks of brushed stainless steel. Each disk was contaminated with 10 microL of a suspension of Mycobacterium terrae containing a soil load. Each disk with a dried inoculum was placed in a glass or Teflon vial, and then overlaid with 50 microL of the test formulation or 50 microL saline for the control carriers. Five test and 3 control disks were used in each run. At the end of the contact time, each vial received 9.95 mL neutralizer solution with 0.1% Tween-80 to stop the reaction and perform the initial microbicide dilution. The inoculum was eluted by mixing on a Vortex mixer for 60 s, and the eluates and saline used to subsequently wash the vials and the funnels were membrane-filtered. Filters were placed on plates of Middlebrook 7H11 agar and incubated at 37 degrees C for at least 30 days before colonies were counted and log10 reductions were calculated in colony-forming units. Tests with a range of commercially available products, having claims against mycobacteria, or believed to be broad-spectrum microbicides, showed that the method gave reproducible results. Products used included oxidizing agents (sodium hypochlorite and an iodophore), a phenolic, a quaternary ammonium compound, and ortho-phthalaldehyde. This method represents a much more realistic evaluation than the currently used quantitative suspension test method for the evaluation of mycobactericidal formulations for registration and, when performed at different product concentrations, allows an assessment of any safety margin or risks in using the test formulation in the field.     

Microbiological methods for testing disinfectant efficiency on Pseudomonas biofilm

Biofilms of the Gram-negative bacteria Pseudomonas aeruginosa and Pseudomonas fragi were grown on stainless steel surfaces (AISI 304, 2B) for 4 days in slime broth. These biofilms were treated with four commercial disinfectants. The disinfectants were alcohol-based, tenside-based, peroxide-based and chlorine-based products, covering most disinfectant types used in the food industry. The effects of the disinfectants on the bacterial cells were first investigated in suspension using the permeabilisation test, which is based on fluorescence assessment of hydrophobic 1-N-phenyl-naphtylamine (NPN). The surfaces covered with disinfectant-treated biofilms were investigated using conventional cultivation, impedimetry and epifluorescence microscopy in combination with image analysis of preparations stained with the DNA-stain acridine orange and with the metabolic indicator system CTC-DAPI. The results showed that the tenside-based and peroxide-based disinfectants permeabilised the cells in suspension. The overall biofilm results showed that of the agents tested, the peroxide-based and chlorine-based disinfectants acted most effectively on cells in biofilms.     

In vitro production of Clostridium difficile spores for use in the efficacy evaluation of disinfectants: a precollaborative investigation

Clostridium difficile is a strict anaerobic spore-forming bacterium, and an increasingly common nosocomial pathogen. The U.S. Environmental Protection Agency (EPA) is responsible for the registration of disinfectants, including products designed to treat environmental surfaces contaminated with spores of C. difficile. Product efficacy data are required for registration; however, there is a lack of methodology for generating high-quality spore suspensions for evaluating product performance. As such, a study was carried out to select a suitable C. difficile strain and to develop a stand-alone method to prepare a spore suspension that meets specific criteria necessary for quantitative testing of disinfectants. The criteria are: (1) a spore titer of > 8 log10/mL, (2) > or = 90% spores to vegetative cells, and (3) resistance of spores (determined by viability) to 2.5 M hydrochloric acid (HCl). Several strains of C. difficile (toxigenic and nontoxigenic) were grown on various media (solid and liquid) for varying lengths of time to determine the best combination of incubation conditions and media to optimize spore production and quality. Once the spore production procedure was optimized, a toxigenic strain of C. difficile [American Type Culture Collection (ATCC) 43598] was selected for use in trials to verify repeatability from one production run to the next. The spore suspension was initiated by spreading vegetative cells of C. difficile (ATCC 43598) on CDC anaerobic 5% sheep blood agar plates and incubating for 7-10 days at 36 +/- 1 degrees C under anaerobic conditions. Spores were harvested when > or = 90% of the cells converted to spores as determined by observation using phase-contrast microscopy. The spores were washed three times with saline-Tween-80, resuspended in cold deionized water, heated to 70 degrees C for 10 min, evaluated microscopically for quality, and enumerated on cycloserine-cefoxitin-fructose agar containing horse blood and taurocholate. The spore suspension was used to inoculate brushed stainless steel carriers (1 cm in diameter) with and without a soil load in accordance with the Standard Quantitative Carrier Disk Test Method (ASTM E-2197-02) to determine carrier load. Once it was determined that > 6 log10 spores/carrier could be recovered, spores were evaluated for resistance to HCI. The sporulation method presented in this report is simple and repeatable and results in spore suspension of high titer (> 8 log10/mL) and quality (> or = 90% spores to vegetative cells) that met acid resistance criteria (spores were resistant to 2.5 M HCI for 10 min). In addition, recovery from brushed stainless steel carriers with and without soil load was > 6 log10 spores/carrier. A 6 log10 performance standard was set forth in the EPA's interim guidance for generating data to support a label claim for effectiveness against C. difficile spores on hard, nonporous surfaces. This precollaborative investigation successfully demonstrated the use of a methodology for in vitro production of C. difficile spores (ATCC 43598) necessary for conducting efficacy tests. A proposal will be submitted to the AOAC INTERNATIONAL Methods Committee on Antimicrobial Efficacy Testing for a collaborative study; see Appendix.     

Method extension study to validate applicability of AOAC Official Method 996.14 Assurance polyclonal enzyme immunoassay for detection of Listeria monocytogenes and related Listeria spp. from environmental surfaces: collaborative study

Test portions from 3 environmental surface types, representative of typical surfaces found in a food production facility, were analyzed by the Assurance Listeria Polyclonal Enzyme Immunoassay (EIA) and the U.S. Department of Agriculture/Food Safety and Inspection Service (USDA/FSIS) culture method for Listeria monocytogenes and related Listeria species. In all cases, naturally contaminated environmental test samples were collected from an actual food production facility by sponge or swab. Test samples from concrete surfaces were collected by both swab and sponge; sponge test samples were collected from rubber surfaces, and swabs were used to sample steel surfaces. Test portions from each surface type were simultaneously analyzed by both methods. A total of 23 collaborators, representing government agencies, as well as private industry in both the United States and Canada, participated in the study. During this study, a total of 550 test portions and controls was analyzed and confirmed, of which 207 were positive and 336 were negative by both methods. Six test portions were positive by culture, but negative by the EIA. Three test portions were negative by culture, but positive by the EIA. Two test portions were negative by EIA and by culture, but confirmed positive when EIA enrichment broths were subcultured to selective agars. The data reported here indicate that the Assurance Listeria EIA method and the USDA/FSIS culture method are statistically equivalent for detection of L. monocytogenes and related Listeria species from environmental surfaces taken by sponges or swabs.     

Method extension study to validate applicability of AOAC Official Method 997.03 visual immunoprecipitate assay (VIP) for Listeria monocytogenes and related Listeria spp. from environmental surfaces: collaborative study

Test portions from 3 environmental surface types, representative of typical surfaces found in a food production facility, were analyzed by the Visual Immunoprecipitate assay (VIP) and the U.S. Department of Agriculture/Food Safety and Inspection Service (USDA/FSIS) culture method for Listeria monocytogenes and related Listeria species. In all cases, naturally contaminated environmental test samples were collected from an actual food production facility by sponge or swab. Test samples from concrete surfaces were collected by both swab and sponge; sponge test samples were collected from rubber surfaces, and swabs were used to sample steel surfaces. Test portions from each surface type were simultaneously analyzed by both methods. A total of 27 laboratories, representing government agencies as well as private industry in both the United States and Canada, participated in the study. During this study, a total of 615 test portions and controls was analyzed and confirmed, of which 227 were positive and 378 were negative by both methods. Nine test portions were positive by culture, but negative by the VIP. Five test portions were negative by culture, but positive by the VIP. Four test portions were negative by VIP and by culture, but confirmed positive when VIP enrichment broths were subcultured to selective agars. The data reported here indicate that the VIP method and the USDA/FSIS culture method are statistically equivalent for detection of L. monocytogenes and related Listeria species from environmental surfaces taken by sponges or swabs.     

Experimental and theoretical investigations of the inelastic and reactive scattering dynamics of O(3p) + D2

This paper presents a combined experimental and theoretical study of the dynamics of O((3)P) + D(2) collisions, with emphasis on a center-of-mass (c.m.) collision energy of 25 kcal mol(-1). The experiments were conducted with a crossed-molecular-beams apparatus, employing a laser detonation source to produce hyperthermal atomic oxygen and mass spectrometric detection to measure the product angular and time-of-flight distributions. The novel beam source, which enabled these experiments to be conducted, contributed unique challenges to the experiments and to the analysis, so the experimental methods and approach to the analysis are discussed in detail. Three different levels of theory were used: (1) quasiclassical trajectories (QCT), (2) time-independent quantum scattering calculations based on high-quality potential surfaces for the two lower-energy triplet states, and (3) trajectory-surface-hopping (TSH) studies that couple the triplet surfaces with the lowest singlet surface using a spin-orbit Hamiltonian derived from ab-initio calculations. The latter calculations explore the importance of intersystem crossing in the dynamics. Both experiment and theory show that inelastically scattered O atoms scatter almost exclusively in the forward direction, with little or no loss of translational energy. For the reaction, O((3)P) + D(2) --> OD + D, the experiment shows that, on average, approximately 50% of the available energy goes into product translation and that the OD product angular distributions are largely backward-peaked. These results may be interpreted in light of the QCT and TSH calculations, leading to the conclusion that the reaction occurs mainly on triplet potential energy surfaces with, at most, minor intersystem crossing to a singlet surface. Reaction on either of the two low-lying reactive triplet surfaces proceeds through a rebound mechanism in which the angular distributions are backward-peaked and the product OD is both vibrationally and rotationally excited. The quantum scattering results are in good agreement with QCT calculations, indicating that quantum effects are relatively small for this reaction at a collision energy of 25 kcal mol(-1).     

Polyelectrolyte complex membranes for specific cell adhesion

The presentation of bioactive ligands on biomaterial surfaces is often confounded by the adsorption of proteins present in the biological milieu, rendering any type of cellular response nonspecific. We have engineered a polyelectrolyte complex membrane that demonstrates specific adhesion of various cell types for both two-dimensional (2D) and three-dimensional (3D) cell culture systems. Specific cell adhesion is achieved by a three-tiered structure: a silica cross-linked polycation as the bottom (first) tier, a nonfouling polyanion-poly(ethylene glycol) (PEG) conjugate as the intermediate (second) tier, and the cell-adhesion ligand as the top (third) tier. Each tier of the membrane was characterized in terms of chemical composition and dimensions. Epithelial cells (primary human cortical renal cells and a hepatocellular carcinoma cell line) cultured on the membranes exhibited little cell attachment on the polyanion-PEG second tier and good cell adhesion on the RGD-modified third tier. Thus, the second tier allowed the effect of cell adhesion due to the ligand (third tier) to be isolated and distinguished from nonspecific cell attachment to the first tier. For the culturing of cells in three dimensions, the three-tiered membrane system was applied using a highly swellable chitosan membrane as the first tier. The resulting cell-membrane construct was uniformly dispersed and centrifuged to form a matrix that interacted intimately with cells in the form of a pellet. Presentation of RGD in the latter format enhanced the viability of human mesenchymal stem cells (hMSCs) over controls without RGD.     

Dissociative chemisorption of H2 on the Cu(110) surface: a quantum and quasiclassical dynamical study

Six-dimensional quantum dynamical and quasiclassical trajectory (QCT) calculations are reported for the reaction and vibrationally inelastic scattering of (v = 0,1,j = 0) H(2) scattering from Cu(110), and for the reaction and rovibrationally elastic and inelastic scattering of (v = 1,j = 1) H(2) scattering from Cu(110). The dynamics results were obtained using a potential energy surface obtained with density functional theory using the PW91 functional. The reaction probabilities computed with quantum dynamics for (v = 0,1,j = 0) were in excellent agreement with the QCT results obtained earlier for these states, thereby validating the QCT approach to sticking of hydrogen on Cu(110). The vibrational de-excitation probability P(v=1,j = 0 --> v = 0) computed with the QCT method is in remarkably good agreement with the quantum dynamical results for normal incidence energies E(n) between 0.2 and 0.6 eV. The QCT result for the vibrational excitation probability P(v = 0,j = 0 --> v = 1) is likewise accurate for E(n) between 0.8 and 1 eV, but the QCT method overestimates vibrational excitation for lower E(n). The QCT method gives probabilities for rovibrationally (in)elastic scattering, P(v = 1,j = 1 --> v('),j(')), which are in remarkably good agreement with quantum dynamical results. The rotationally averaged, initial vibrational state-selective reaction probability obtained with QCT agrees well with the initial vibrational state-selective reaction probability extracted from molecular beam experiments for v = 1, for the range of collision energies for which the v=1 contribution to the measured total sticking probability dominates. The quantum dynamical probabilities for rovibrationally elastic scattering of (v = 1,j = 1) H(2) from Cu(110) are in good agreement with experiment for E(n) between 0.08 and 0.25 eV.     

Surface modification of droplet polymeric microfluidic devices for the stable and continuous generation of aqueous droplets

Droplet microfluidics performed in poly(methyl methacrylate) (PMMA) microfluidic devices resulted in significant wall wetting by water droplets formed in a liquid-liquid segmented flow when using a hydrophobic carrier fluid such as perfluorotripropylamine (FC-3283). This wall wetting led to water droplets with nonuniform sizes that were often trapped on the wall surfaces, leading to unstable and poorly controlled liquid-liquid segmented flow. To circumvent this problem, we developed a two-step procedure to hydrophobically modify the surfaces of PMMA and other thermoplastic materials commonly used to make microfluidic devices. The surface-modification route involved the introduction of hydroxyl groups by oxygen plasma treatment of the polymer surface followed by a solution-phase reaction with heptadecafluoro-1,1,2,2-tetrahydrodecyl trichlorosilane dissolved in fluorocarbon solvent FC-3283. This procedure was found to be useful for the modification of PMMA and other thermoplastic surfaces, including polycyclic olefin copolymer (COC) and polycarbonate (PC). Angle-resolved X-ray photoelectron spectroscopy indicated that the fluorination of these polymers took place with high surface selectivity. This procedure was used to modify the surface of a PMMA droplet microfluidic device (DMFD) and was shown to be useful in reducing the wetting problem during the generation of aqueous droplets in a perfluorotripropylamine (FC-3283) carrier fluid and could generate stable segmented flows for hours of operation. In the case of PMMA DMFD, oxygen plasma treatment was carried out after the PMMA cover plate was thermally fusion bonded to the PMMA microfluidic chip. Because the appended chemistry to the channel wall created a hydrophobic surface, it will accommodate the use of other carrier fluids that are hydrophobic as well, such as hexadecane or mineral oils.     

Approaching charge balance in organic light-emitting diodes by tuning charge injection barriers with mixed monolayers

Self-assembled monolayers (SAMs) of binary mixtures of 1-butylphosphonic acid and the trifluoromethyl-terminated analogue (4,4,4-trifluoro-1-butylphosphonic acid) were formed on ITO surfaces to tune the work function of ITO over a range of 5.0 to 5.75 eV by varying the mixing ratio of the two adsorbents. The mixed SAM-modified ITO surfaces were used as the anode in the fabrication of OLED devices with a configuration of ITO/SAM/HTL/Alq3/MX/Al, where HTL was the NPB or BPAPF hole-transporting layer and MX was the LiF or Cs(2)CO(3) injection layer. It was shown that, depending on the HTL or MX used, the maximum device current and the maximum luminance efficiency occurred with anodes of different modifications because of a shift in the point of hole/electron carrier balance. This provides information on the charge balance in the device and points to the direction to improve the performance.     

Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit, and dried figs by immunoaffinity column cleanup with liquid chromatography: interlaboratory study

An interlaboratory study was performed on behalf of the Food Standards Agency to evaluate the effectiveness of an affinity column cleanup liquid chromatographic (LC) method for the determination of ochratoxin A in a variety of dried fruit at European regulatory limits. To ensure homogeneity before analysis, laboratory samples are normally slurried with water in the ratio of 5 parts fruit to 4 parts water, and test materials in this form were used in the study. The test portion was extracted with acidified methanol. The extract was filtered, diluted with phosphate-buffered saline, and applied to an affinity column. The column was washed and ochratoxin A was eluted with methanol. Ochratoxin A was quantified by reversed-phase LC. The use of post-column pH shift to enhance the fluorescence of ochratoxin A by the addition of 1.1 M ammonia solution to the column eluant is optional. Determination was by fluorescence. Currants, sultanas, raisins, figs, and mixed fruit (comprising dried pineapple, papaya, sultanas, prunes, dates, and banana chips), both naturally contaminated and blank (very low level), were sent to 24 collaborators in 7 European countries. Participants were asked to spike test portions of all test samples at a level equivalent to 5 ng/g ochratoxin A. Average recoveries ranged from 69 to 74%. Based on results for 5 naturally contaminated test samples (blind duplicates) the relative standard deviation for repeatability (RSDr) ranged from 4.9 to 8.7%, and the relative standard deviation for reproducibility (RSDR) ranged from 14 to 28%. The method showed acceptable within- and between-laboratory precision for all 5 matrixes, as evidenced by HORRAT values <1.3.     

Surface display on gram positive bacteria

Heterologous surface display on Gram-positive bacteria was first described almost a decade ago and has since then developed into an active research area. Gram-positive bacterial surface display has today found a range of applications, in immunology, microbiology and biotechnology. Live bacterial vaccine delivery vehicles are being developed through the surface display of selected foreign antigens on the bacterial surfaces. In this field, "second generation" vaccine delivery vehicles are at present being generated by the addition of mucosal targeting signals through co-display of adhesins, in order to achieve targeting of the live bacteria to immunoreactive sites to thereby increase immune responses. Engineered Gram-positive bacteria are further being evaluated as novel microbial biocatalysts with heterologous enzymes immobilized as surface exposed on the bacterial cell surface. A discussion has started whether bacteria can find use as new types of whole-cell diagnostic devices since single-chain antibodies and other variants of tailor-made binding proteins can be displayed on bacteria. Bacteria with increased binding capacity for certain metal ions can be created and potential environmental or biosensor applications for such recombinant bacteria as biosorbents are being discussed. This article explains the basis of Gram-positive bacterial surface display, and discusses current uses and possible future trends of this emerging technology.     

Dual functional polyelectrolyte multilayer coatings for implants: permanent microbicidal base with controlled release of therapeutic agents

Here we present a new bifunctional layer-by-layer (LbL) construct made by combining a permanent microbicidal polyelectrolyte multilayered (PEM) base film with a hydrolytically degradable PEM top film that offers controlled and localized delivery of therapeutics. Two degradable film architectures are presented: (1) bolus release of an antibiotic (gentamicin) to eradicate initial infection at the implant site, or (2) sustained delivery of an anti-inflammatory drug (diclofenac) to cope with inflammation at the site of implantation due to tissue injury. Each degradable film was built on top of a permanent base film that imparts the implantable device surface with microbicidal functionality that prevents the formation of biofilms. Controlled-delivery of gentamicin was demonstrated over hours and that of diclofenac over days. Both drugs retained their efficacy upon release. The permanent microbicidal base film was biocompatible with A549 epithelial cancer cells and MC3T3-E1 osteoprogenitor cells, while also preventing bacteria attachment from turbid media for the entire duration of the two weeks studied. The microbicidal base film retains its functionality after the biodegradable films have completely degraded. The versatility of these PEM films and their ability to prevent biofilm formation make them attractive as coatings for implantable devices.     

Detection of Salmonella in fresh cheese,poultry products,and dried egg products by the ISO 6579 Salmonella culture procedure and the AOAC official method: collaborative study

Three food types were analyzed for the presence of Salmonella by the AOAC culture method and by the International Organization for Standardization (ISO 6579:2002) culture method. Paired test portions of each food type were simultaneously analyzed by both methods. A total of 21 laboratories representing federal government agencies and private industry, in the United States and Europe, participated in this interlaboratory study. Foods were artificially contaminated with Salmonella and competing microflora if naturally contaminated sources were not available. No statistical differences (p < 0.05) were observed between the AOAC and ISO culture methods for fresh cheese and dried egg products. A statistically significant difference was observed for one of the 2 lots of poultry from the first trial. The poultry meat used in this run was radiation sterilized, artificially contaminated with Salmonella and competitive flora, and then lyophilized. A second trial was conducted with 2 separate lots of raw ground chicken that were naturally contaminated. The results from the second trial showed no statistical difference between the 2 culture methods. A third trial involving 4 laboratories was conducted on 2 separate lots of naturally contaminated raw poultry. Again, no statistically significant differences occurred. It is recommended that ISO 6579:2002 culture method for Salmonella be adopted Official First Action for the analysis of fresh cheese, fresh chilled and frozen poultry, and dried egg products.     

Dynamics of H2 dissociation on the 1/2 ML c(2 × 2)-Ti/Al(100) surface

The dissociation of H(2) on Ti-covered Al surfaces is relevant to the rehydrogenation and dehydrogenation of the NaAlH(4) hydrogen storage material. The energetically most stable structure for a 1/2 monolayer of Ti deposited on the Al(100) surface has the Ti atoms in the second layer with a c(2 × 2) structure, as has been confirmed by both low-energy electron diffraction and low-energy ion scattering experiments and density functional theory studies. In this work, we investigate the dynamics of H(2) dissociation on a slab model of this Ti/Al(100) surface. Two six-dimensional potential energy surfaces (PESs) have been built for this H(2) + Ti/Al(100) system, based on the density functional theory PW91 and RPBE exchange-correlation functionals. In the PW91 (RPBE) PES, the lowest H(2) dissociation barrier is found to be 0.65 (0.84) eV, with the minimum energy path occurring for H(2) dissociating above the bridge to top sites. Using both PESs, H(2) dissociation probabilities are calculated using the classical trajectory (CT), the quasi-classical trajectory (QCT), and the time-dependent wave-packet methods. We find that the QCT H(2) dissociation probabilities are in good agreement with the quantum dynamics results in the collision energy range studied up to 1.0 eV. We have also performed molecular beam simulations and present predictions for molecular beam experiments. Our molecular beam simulations show that H(2) dissociation on the 1/2 ML Ti/Al(100) surface is an activated process, and the reaction probability is found to be 6.9% for the PW91 functional and 1.8% for the RPBE at a nozzle temperature of 1700 K. Finally, we have also calculated H(2) dissociation rate constants by applying transition state theory and the QCT method, which could be relevant to modeling Ti-catalyzed rehydrogenation and dehydrogenation of NaAlH(4).