The influence of gravity on the distribution of the deposit formed onto a substrate by sessile, hanging, and sandwiched hanging drop evaporation

The focus of the present article is the study of the influence of gravity on the particle deposition profiles on a solid substrate during the evaporation of sessile, hanging and sandwiched hanging drops of colloidal particle suspensions. For concentrations of nanoparticles in the colloidal solutions in the range 0.0001-1 wt.%, highly diluted suspensions will preferentially form rings while concentrated suspensions will preferentially form spots in both sessile and hanging drop evaporation. For intermediary concentrations, the particle deposition profiles will depend on the nanoparticle aggregation dynamics in the suspension during the evaporation process, gravity and on the detailed evaporation geometry. The evaporation of a drop of toluene/carbon nanoparticle suspension hanging from a pendant water drop will leave on the substrate a circular spot with no visible external ring. By contrast, a clear external ring is formed on the substrate by the sessile evaporation of a similar drop of suspension sandwiched between a water drop and the substrate. From the application viewpoint, these processes can be used to create preferential electrical conductive carbon networks and contacts for arrays of self-assembled nanostructures fabricated on solid substrates as well as on flexible polymeric substrates.     

Inward-growing self-assembly of colloidal crystal films on horizontal substrates

Colloidal crystal films have been fabricated on solid substrates with a horizontal deposition method. Scanning electron microscope images showed that the colloidal crystal films exhibit ordered face-centered cubic structures in large domains. Optical measurements demonstrated the presence of photonic band gap along the crystallographic [111] direction. The fabrication method described in this paper allows one to rapidly fabricate colloidal crystal films of different thicknesses, which can be controlled by varying colloidal suspension concentration or volume. In addition, the method also works well for growing colloidal crystal films on a hydrophilic solid substrate with a rough surface. Furthermore, the fabrication of colloidal crystal heterostructures has been demonstrated. An inward-growing mechanism responsible for self-assembly of colloidal spheres on horizontal substrates has been proposed to interpret the observed experimental results.     

SiO2胶体晶体垂直沉积自组装方法的改进

采用垂直沉积技术及相应的改进方法,使用化学合成的400 nm单分散二氧化硅微球自组装制备了胶体晶体薄膜。通过扫描电镜与分光光度计对样品的微观结构与透过光谱进行了表征,并对比研究了不同的垂直沉积方法对胶体晶体的影响。结果表明,通过温度与流量控制两种改进手段,均能制备具有六方密堆结构周期排列的胶体晶体薄膜。在垂直沉积过程中适当的升高温度有利于降低胶体粒子的用量,而通过流量控制的垂直沉积技术则可以有效缩短自组装时间。通过调节蠕动泵改变液面与基板的相对运动速度,或者调控温度改变胶体溶液的蒸发速率,可在材料表面形成单层或多层的胶体晶体薄膜。改进的垂直沉积技术将有望应用于快速沉积大面积、高质量的胶体晶体材料。     

A universal approach to fabricate ordered colloidal crystals arrays based on electrostatic self-assembly

We present a novel and simple method to fabricate two-dimensional (2D) poly(styrene sulfate) (PSS, negatively charged) colloidal crystals on a positively charged substrate. Our strategy contains two separate steps: one is the three-dimensional (3D) assembly of PSS particles in ethanol, and the other is electrostatic adsorption in water. First, 3D assembly in ethanol phase eliminates electrostatic attractions between colloids and the substrate. As a result, high-quality colloidal crystals are easily generated, for electrostatic attractions are unfavorable for the movement of colloidal particles during convective self-assembly. Subsequently, top layers of colloidal spheres are washed away in the water phase, whereas well-packed PSS colloids that are in contact with the substrate are tightly linked due to electrostatic interactions, resulting in the formation of ordered arrays of 2D colloidal spheres. Cycling these processes leads to the layer-by-layer assembly of 3D colloidal crystals with controllable layers. In addition, this strategy can be extended to the fabrication of patterned 2D colloidal crystals on patterned polyelectrolyte surfaces, not only on planar substrates but also on nonplanar substrates. This straightforward method may open up new possibilities for practical use of colloidal crystals of excellent quality, various patterns, and controllable fashions.     

Self-assembly of various guest substrates in natural cellulose substances to functional nanostructured materials

Biological organisms are produced from self-assembly of highly ordered functional units and are inherently complex and hierarchical, possessing macro-to-nanoscale features. It is a facile, low-cost and environmentally benign short-cut to artificial functional materials with unique multilevel structures and morphologies employing biological substances as platform for the self-assembly of various guest substrates. This review summarizes the recent advances in the fabrication of nanostructured materials with designed properties and functionalities by means of self-assembly of different guest substrates (such as metal oxide thin films, small molecules, polymers, biomacromolecules, nanoparticles, carbon nanotubes and colloidal spheres) on the surfaces of cellulose nanofibers of bulk natural cellulose substances. The combination of the specific chemical properties of the guest substrates and the unique physical features of the natural cellulose substances sheds new light on the design and syntheses of new functional nanomaterials.     

Salt-induced protein phase transitions in drying drops

Protein phase transitions in drying sessile drops of protein-salt-water colloidal systems were studied by means of optical and atom-force microscopy. The following sequence of events was observed during drop drying: attachment of a drop to a glass support; redistribution of colloidal phase due to hydrodynamic centrifugal stream; protein ring formation around the edge; formation of protein spatial structures inside a protein ring that pass into gel in the middle of the drop; salt crystallization in the shrinking gel. It was assumed that rapid drying of a protein ring over the circle of high colloidal volume fraction and low strength of interparticle attraction leads to formation of colloidal glass, whereas gel forms only in the middle of the drop at very low protein volume fraction and strong attraction between the particles. Before gelation, colloidal particles form fractal clusters. In dried drops of salt-free protein solutions, no visual protein structures were observed. Structural evolution of protein in sessile drying drops of protein-salt aqueous colloidal solutions is discussed on the basis of experimental data.     

Clusters of amphiphilic colloidal spheres

Orientation-dependent interactions can drive unusual self-assembly of colloidal particles. This study, based on combined epifluorescence microscopy and Monte Carlo simulations, shows that amphiphilic colloidal spheres, hydrophobic on one hemisphere and charged on the other, assemble in water into extended structures not formed by spheres of uniform surface chemical makeup. Small, compact clusters each comprised of less than 10 of these Janus spheres link up, as increasing salt concentration enhances electrostatic screening, into wormlike strings.     

垂直排列法组装胶体晶体的最新进展

光子晶体是一种具有光子带隙的新型功能材料.利用胶体粒子自组装三维光子晶体由于其制备过程比较经济、简单,从而为很多人所关注.目前报道的方法已有多种.其中垂直排列法的简便易行使得其受到了广泛的研究,但另一方面这种方法本身的缺点也限制了它的使用范围.针对这种情况,很多研究机构提出了他们的改进方法.本文简要概述了在这一方面的最新进展,并且在本实验室已能够制备任意单分散、均一尺寸二氧化硅粒子的基础上,采用恒温快速蒸发自组装法得到了高质量的胶体晶体排列.     

Long-Range Electrostatic Interaction between a Charged Wall and Two Similarly Charged Colloidal Spheres at Low Surface Potentials

The long-range electrostatic interaction between a pair of similarly charged colloidal spheres and a charged planar wall at low surface potentials is theoretically investigated. The linear Poisson-Boltzmann equation (PBE) and the point charge approximation of the charged sphere are used. The electrical potential distribution in the electrolyte solution is found from the PBE at the constant surface potentials using the image charge method. The electrostatic forces acting on the spheres are then calculated. The results show that the repulsive interaction between a pair of similarly charged colloidal spheres clearly decreases when a charged wall appears nearby, but it is impossible for an attractive force to emerge at the scaled surface potentials less than 1. There is, however, an attractive force between the charged wall and the similarly charged colloidal spheres, when the surface potential zetap on the wall is sufficiently higher than the surface potential zetas on the spheres to make zetap > zetasexp(kappah) (h is the distance from the wall to the sphere center). In this case, there are negative surface charges on the spheres at positive surface potential zetas. It is these negative charges that produce the above attraction. Copyright 1999 Academic Press.     

Agglomeration of alumina submicronparticles by silica nanoparticles: application to processing spheres by colloidal route

In aqueous media, heterocoagulation between submicronic alumina (400 nm) and nanometric silica (25 nm) leads to the adsorption of silica on the alumina surface. By controlling the coverage rate of alumina particles, this adsorption destabilizes the suspension that leads to a very porous network of agglomerated particles. This work shows that the structure is all the more open as the density of charge carried by the two oxides is high and the ionic strength in the suspension low. From such a flocculated suspension, a new colloidal process to fabricate ceramic spheres is proposed which is based on a size increase of agglomerates. Under a controlled rotation of the vessel, electrostatic attraction between the surface charges of opposite polarity induces a size increase of agglomerates until the formation of spheres occurs. It has been shown that the mechanism of growth is poisoned by species adsorbed such as ions. Nevertheless, this new process proves very promising because it leads to a narrow size distribution of spheres by colloidal way, which can be subsequently consolidated by sintering, with a smooth surface.     

Rapidly infrared-assisted cooperatively self-assembled highly ordered multiscale porous materials

In this paper, cooperative self-assembly (CSA) of colloidal spheres with different sizes was studied. It was found that a complicated jamming effect makes it difficult to achieve an optimal self-assembling condition for construction of a well-ordered stacking of colloidal spheres in a relatively short growth time by CSA. Through the use of a characteristic infrared (IR) technique to significantly accelerate local evaporation on the growing interface without changing the bulk growing environment, a concise three-parameter (temperature, pressure, and IR intensity) CSA method to effectively overcome the jamming effect has been developed. Mono- and multiscale inverse opals in a large range of lattice scales can be prepared within a growth time (15-30 min) that is remarkably shorter than the growth times of several hours for previous methods. Scanning electron microscopy images and transmittance spectra demonstrated the superior crystalline and optical qualities of the resulting materials. More importantly, the new method enables optimal conditions for CSA without limitations on sizes and materials of multiple colloids. This strategy not only makes a meaningful advance in the applicability and universality of colloidal crystals and ordered porous materials but also can be an inspiration to the self-assembly systems widely used in many other fields, such as nanotechnology and molecular bioengineering.     

SiO2胶体颗粒的三维有序自组装

由SiO2胶体颗粒的三维有序自组装可以得到面心立方三维结构,它具有折射率周期性变化的特点。它的制备涉及胶体化学、材料科学等学科的前沿领域。其自组装方法包括胶体颗粒的沉降自组装、胶体颗粒在物体限制下的自组装、胶体颗粒的连续对流自组装和利用胶体颗粒表面电性质的自组装。本文对这些组装方法进行了介绍。     

In situ monitoring of structural changes during colloidal self-assembly

Reflectance spectroscopy is utilized to monitor structural changes during the self-assembly of a monodisperse colloidal system at the meniscus of a sessile drop on an inert substrate. Treating the ordered colloidal structure as a photonic crystal is equivalent to monitoring the changes in the photonic band gap (PBG) as the colloidal system self-assembles heterogeneously into a crystal through solvent evaporation in ambient conditions. Using a modified Bragg's law model of the photonic crystal, we can trace the structural evolution of the self-assembling colloidal system. After a certain induction period, a face-centered cubic (FCC) structure emerges, albeit with a lattice parameter larger than that of a true close-packed structure. This FCC structure is maintained while the lattice parameter shrinks continuously with further increase in the colloidal concentration due to drying. When the structure reaches a lattice parameter 1.09 times the size of that of a true close-packed structure, it undergoes an abrupt decrease in lattice spacing, apparently similar to those reported for lattice-distortive martensitic transformations. This abrupt final lattice shrinkage agrees well with the estimated Debye screening length of the electric double layer of charged colloids and could be the fundamental reason behind the cracking commonly seen in colloidal crystals.     

Collodial cluster arrays by electrohydrodynamic printing

A "stable" electrohydrodynamic jet is used to print arrays of colloidal suspensions on hydrophobic surfaces. Printed lines break up into sessile drops, and capillary forces guide the self-assembly of colloidal particles during the evaporation of the liquid, resulting in arrays of colloidal single particles or particle clusters depending on the concentration of the suspensions. The clusters differ from those formed in the absence of a substrate when the number of particles is larger than three. Multiple structures are found for the same number of particles.     

Fabrication of superhydrophobic surfaces from binary colloidal assembly

In this work, superhydrophobic surfaces were derived from binary colloidal assemblies. CaCO(3)-loaded hydrogel spheres and silica or polystyrene ones were consecutively dip-coated on silicon wafers. The former assemblies were recruited as templates for the latter self-assembly. Due to the hydrophilicity difference between silicon wafers and CaCO(3)-loaded hydrogel spheres, the region selective localization of silica or polystyrene spheres leads to irregular binary structures with a hierarchical roughness. The subsequent modification with low surface energy molecules yields a superhydrophobic surface. The heating treatment may largely enhance the mechanical stability of the resulting binary structures, which allows regeneration of the surface superhydrophobicity, providing a good durability in practice.     

表面富含羧基的单分散交联聚合物微球的快速自组装制备胶体晶的研究

在20～70℃范围内,用垂直沉积的方法可使表面富含羧基的单分散交联聚合物微球在不同的基底上快速自组装成三维有序的胶体晶.不同粒径的微球形成的胶体晶其光禁带峰位不同,因此可调控不同波长的光在胶体晶中的传播.利用紫外-可见光谱研究了胶体晶的光禁带峰位与组成其微球粒径之间的关系.结果表明,随着构成胶体晶微球粒径的增大,胶体晶光禁带峰位发生了红移,而随着入射光角度的增大,胶体晶的光禁带峰位发生了蓝移.利用原子力显微镜和扫描电子显微镜研究了其它条件对聚合物微球有序排列的影响,发现聚合物微球在pH值为3.0～13.0范围内可以形成三维有序自组装胶体晶.这是由于在不同的pH值下,聚合物微球表面发生羧基化及去羧基化反应,导致在自组装过程中微球之间和微球与介质之间作用力的变化     

pH响应木质素基胶体球的制备和表征

以造纸制浆废液中的松木碱木质素（AL）为原料,通过季铵化改性,制备了季铵化碱木质素（QAL）.QAL与十二烷基苯磺酸钠（SDBS）通过静电作用形成QAL/SDBS复配物,将QAL/SDBS复配物在乙醇/水混合溶剂中进行自组装得到具有pH响应性的胶体球.采用X射线光电子能谱（XPS）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、元素分析和静态接触角研究了胶体球的形成过程和结构.研究结果表明,QAL/SDBS复配物通过疏水聚集作用形成具有较疏水的“核”和较亲水的“壳”结构的规整胶体球.在pH=3.0时,由于QAL与SDBS间的静电作用和疏水作用使胶体球能够稳定存在.当pH>7.5时,季铵化碱木质素上的羧基电离,由于静电斥力的作用使胶体球开始解聚,当pH=10.5时,季铵化碱木质素上的酚羟基的电离使得QAL与SDBS间的静电斥力增大,胶体球完全解聚.这种在酸性条件下稳定,中性条件下解聚的胶体球在药物缓释方面具有潜在的应用.     

Mechanistic principles of colloidal crystal growth by evaporation-induced convective steering

We simulate evaporation-driven self-assembly of colloidal crystals using an equivalent network model. Relationships between a regular hexagonally close-packed array of hard, monodisperse spheres, the associated pore space, and selectivity mechanisms for face-centered cubic microstructure propagation are described. By accounting for contact line rearrangement and evaporation at a series of exposed menisci, the equivalent network model describes creeping flow of solvent into and through a rigid colloidal crystal. Observations concerning colloidal crystal growth are interpreted in terms of the convective steering hypothesis, which posits that solvent flow into and through the pore space of the crystal may play a major role in colloidal self-assembly. Aspects of the convective steering and deposition of high-Peclet-number rigid spherical particles at a crystal boundary are inferred from spatially resolved solvent flow into the crystal. Gradients in local flow through boundary channels were predicted due to the channels' spatial distribution relative to a pinned free surface contact line. On the basis of a uniform solvent and particle flux as the criterion for stability of a particular growth plane, these network simulations suggest the stability of a declining {311} crystal interface, a symmetry plane which exclusively propagates fcc microstructure. Network simulations of alternate crystal planes suggest preferential growth front evolution to the declining {311} interface, in consistent agreement with the proposed stability mechanism for preferential fcc microstructure propagation in convective assembly.     

Fabrication of spherical colloidal crystals using electrospray

We demonstrated the use of electrohydrodynamic atomization to prepare uniform-sized emulsion droplets in which equal spheres of silica or polystyrene were dispersed. The size of the emulsion droplets was easily controlled by the electric field strength and the flow rate, independently of the diameter of the nozzles. During the evaporation of solvent in the droplets, spherical colloidal crystals were formed by self-assembly of the monodisperse colloidal spheres. The diameter of the spherical colloidal crystals was in the range of 10-40 microm. Depending on the stability of colloidal particles, the morphology of the self-assembled structure was varied. In particular, silica spheres in ethanol droplets were self-assembled into compactly packed silica colloidal crystals in spherical shapes, whereas polystyrene latex spheres in toluene droplets self-assembled into spherical colloidal crystal shells with hollow cores. The silica colloidal assemblies reflected diffraction colors according to the three-dimensionally ordered arrangement of silica spheres.     

Self-ordering of colloidal particles in shallow nanoscale surface corrugations

The influence of nanoscale out-of-plane roughness on the ordering of submicron spheres during evaporative deposition from colloidal suspension was examined using shallow corrugated substrates possessing optical wavelengths and nanoscale amplitude. Under conditions in which spheres were embedded in a liquid layer with thickness on the order of the sphere diameter, it was observed that the spheres overwhelmingly deposited in the valleys of the surface corrugations rather than on their peaks. This behavior persisted to surprisingly shallow corrugation amplitudes, sometimes 100 times smaller than the sphere diameter. An analysis of the capillary forces on the spheres explains this behavior and also yields a critical corrugation amplitude below which a substrate will appear "flat" to depositing spheres. The observation that substrate features significantly smaller than the sphere diameter can influence deposition morphology may lead to simple methods to create large domains of order in colloidal crystals.