Fabrication and application of highly ordered mesoporous Co3O4, NiO, and their metals

Highly ordered mesoporous Co₃O₄, NiO, and their metals were synthesized by nanocasting method using there corresponding mesoporous SBA-15 silica as a template. The obtained porous metal oxides have high surface areas, large pore volume, and a narrow pore size distribution. The N₂-adsorption data for mesoporous metal oxides have provided the BET area of 257.7 m² g⁻¹ and the total pore volume of 0.46 cm³ g⁻¹. The mesoporous metals were employed as a catalyst in the synthesis of (S)-3-pyrrolidinol from chiral (S)-4-chloro-3-hydroxybutyronitrile, and a high yield to (S)-3-pyrrolidinol-salt was obtained on the mesoporous Co metal catalyst.     

Highly selective epoxidation of styrene over mesoporous Au-Ti-SBA-15 via photocatalysis process: Synthesis, characterization, and catalytic application

Highly ordered Au-Ti-SBA-15 mesoporous molecular sieves were successfully synthesized by one-pot hydrothermal synthesis in acid medium, and were characterized by XRD, UV-vis, SEM, element-mapping, HRTEM, N₂ adsorption, XPS, ²⁹Si MAS NMR, NH₃-TPD and FT-IR. The as-prepared Au-Ti-SBA-15 samples were possessed of highly ordered mesostructures with larger pore diameter, pore volume and uniform mesopore size distribution. In the oxidation of styrene with H₂O₂ as the oxidant over Au-Ti-SBA-15 catalyst under photo-irradiation, reaction parameters, such as molar ratio of H₂O₂ to styrene, reaction time, solvent, the amount of catalyst, catalyst species, and the amount of 3% NaOH, were conditioned at length. As a result, highly selective epoxidation of styrene over catalyst was carried out perfectly for 10 min with high TOF of 4.75 × 10³ min⁻¹.     

Magnetic nanocomposite spinel and FeCo core-shell and mesoporous systems

The fabrication of condensed silica and mesoporous silica coated spinel CoFe₂O₄ and FeCo alloy magnetic nanocomposites are reported. The encapsulation of well-defined 5 nm thick uniform silica layer on CoFe₂O₄ magnetic nanoparticles was performed. The formation of mesopores in the shell was a consequence of removal of organic group of the precursor through annealing. The NiO nanoparticles were loaded into the mesoporous silica. The mesoporous silica shells leads to a larger coercivity than that of pure CoFe₂O₄ magnetic nanoparticles due to the decrease of interparticle interactions and magneto-elastic anisotropy. In addition, the FeCo nanoparticles were coated by condensed and mesoporous silica. The condensed silica can protect the reactive FeCo alloy from oxidation up to 300 °C. However, saturation magnetization of FeCo nanoparticles coated by silica after 400 °C annealing is dramatically decreased due to the oxidation of the FeCo core. The mesoporous silica coated magnetic nanostructure loaded with NiO as a final product could be used in the field of biomedical applications.     

Biosynthesis and magnetic properties of mesoporous Fe3O4 composites

Magnetic Fe₃O₄ materials with mesoporous structure are synthesized by co-precipitation method using yeast cells as a template. The X-ray diffraction (XRD) pattern indicates that the as-synthesized mesoporous hybrid Fe₃O₄ is well crystallized. The Barrett-Joyner-Halenda (BJH) models reveal the existence of mesostructure in the dried sample which has a specific surface area of 96.31 m²/g and a pore size distribution of 8-14 nm. Transmission electron microscopy (TEM) measurements confirm the wormhole-like structure of the resulting samples. The composition and chemical bonds of the Fe₃O₄/cells composites are studied by Fourier transform infrared (FT-IR) spectroscopy. Preliminary magnetic properties of the mesoporous hybrid Fe₃O₄ are characterized by a vibrating sample magnetometer (VSM). The magnetic Fe₃O₄/cells composites with mesoporous structure have potential applications in biomedical areas, such as drug delivery.     

Effect of pressure and magnetic field on bilayer La1.25Sr1.75Mn2O7 single crystal

We report the temperature dependence of susceptibility for various pressures, magnetic fields and constant magnetic field of 5 T with various pressures on La_2−2xSr_1+2xMn₂O₇ single crystal to understand the effectiveness of pressure and magnetic field in altering the magnetic properties. We find that the Curie temperature, T_c, increases under pressure (dT_c/dP=10.9 K/GPa) and it indicates the enhancement of ferromagnetic phase under pressure up to 2 GPa. The magnetic field dependence of T_c is about 26 K for 3 T. The combined effect of pressure and constant magnetic field (5 T) shows dT_c/dP=11.3 K/GPa and the peak structure is suppressed and broadened. The application of magnetic field of 5 T realizes 3D spin ordered state below T_c at atmospheric pressure. Both peak structure in χ_c and 3D spin ordered state are suppressed, and changes to 2D-like spin ordered state by increase of pressure. These results reveal that the pressure and the magnetic field are more competitive in altering the magnetic properties of bilayer manganite La_1.25Sr_1.75Mn₂O₇ single crystal.     

High sensitivity of magnetism of the “114” ferrimagnet CaBaCo4O7 to stoichiometry deviation

The effect of oxygen/cobalt off-stoichiometry upon magnetism in CaBaCo₄O₇ has been investigated. It is shown that the oxides CaBaCo₄O_7+δ and CaBaCo_4−xO_7−δ (0≤x≤0.20) synthesized below 1100 °C in air exhibit phase separation, where ferrimagnetic regions with T_C~56 K to 64 K coexist with regions of magnetic clusters. The latter are detected from ac-susceptibility measurements, which show various frequency dependent peaks at ~14–20 K, 37 K, and 45 K, depending on the stoichiometry. The origin of this phenomenon is attributed to the great sensitivity of the material to oxidation as the synthesis of temperature is lowered, leading to the introduction of additional Co³⁺ cations, with respect to the ideal formula CaBaCo₂²⁺Co₂³⁺O_7. This excess Co³⁺ tends to destroy the ferromagnetic zig-zag chains of the ferrimagnetic structure and creates various cobalt spin clusters, leading to the inherent phase separation in the samples.     

Ground-state magnetism of chromium-substituted LiMn2O4 spinel

Comparative crystal structure and magnetic properties studies have been conducted on quaternary powder spinel samples LiMn_1.82Cr_0.18O₄ obtained by two different synthesis methods, glycine-nitrate (GN) and ultrasonic spray-pyrolysis (SP). Although both samples possess the same spinel structure of the cubic space group Fd3¯m, their low-temperature magnetic properties display significant differences. While the SP sample undergoes only spin-glass transition at the freezing temperature T_f=20 K, the GN sample possesses more complicated low-temperature magnetic behavior of the reentrant spin-glass type with the Néel temperature T_N=42 K and freezing temperature T_f=22 K. High-temperature magnetic susceptibility of both samples is of the Curie–Weiss type with the effective magnetic moments in agreement with the nominal compositions. This fact together with the results of the chemical analysis discards the existence of the diversity in chemical compositions as a possible cause for the observed differences in the low-temperature magnetism. On the other hand, the crystal structure analysis done by the Rietveld refinement of the X-ray powder diffraction data points to the strong influence of the cation distribution on the ground-state magnetism of these systems. An explanation of this influence is proposed within the framework of a collective Jahn–Teller effect.     

BiOCl nanowire with hierarchical structure and its Raman features

BiOCl is a promising V-VI-VII-compound semiconductor with excellent optical and electrical properties, and has great potential applications in photo-catalysis, photoelectric, etc. We successfully synthesize BiOCl nanowire with a hierarchical structure by combining wet etch (top-down) with liquid phase crystal growth (bottom-up) process, opening a novel method to construct ordered bismuth-based nanostructures. The morphology and lattice structures of Bi nanowires, β-Bi₂O₃ nanowires and BiOCl nanowires with the hierarchical structure are investigated by scanning electron microscope (SEM) and transition electron microscope (TEM). The formation mechanism of such ordered BiOCl hierarchical structure is considered to mainly originate from the highly preferred growth, which is governed by the lattice match between (1 1 0) facet of BiOCl and (2 2 0) or (0 0 2) facet of β-Bi₂O₃. A schematic model is also illustrated to depict the formation process of the ordered BiOCl hierarchical structure. In addition, Raman properties of the BiOCl nanowire with the hierarchical structure are investigated deeply.     

Water vapour sorption on hydrophilic and hydrophobic nanoporous materials

The aim of this study is to compare water vapour sorption isotherms on various mesoporous materials in their pristine state and after silanisation. Commonly the pristine state is regarded as hydrophilic and the silanised one as hydrophobic. Water vapour sorption experiments are discussed for a highly ordered nanoporous aluminium oxide with straight cylindrical channels of ca. 25 nm diameter and for various controlled porous glasses (CPGs) with disordered pores in the range of 13 nm diameter. The water sorption isotherms exhibit in both cases a hysteresis over the entire humidity range. At higher humidities the pristine materials show capillary condensation whereas for the silanised samples this phase transition does not occur or even a loss of water is recorded as for the silanised Al₂O₃. Surprisingly, for the silanised Al₂O higher water uptake is observed in the low humidity region. Application of the excess surface work (ESW) method delivers a reduced structural component in the long range interaction of the water molecules with a hydrophobic surface. Inverse gas chromatography studies of the silanised CPGs result in an increased short range dispersive part of the surface energy with the increasing degree of silanisation.     

Magnetic and structural properties of CaO–SiO2–P2O5–Na2O–Fe2O3 glass ceramics

Magnetic properties of glass ceramics derived from glasses with composition 41CaO·(52−x)SiO₂·4P₂O₅·xFe₂O₃·3Na₂O (2?x?10 mol% iron oxide (Fe₂O₃)) are reported. Structural investigation revealed the presence of nanocrystalline magnetite phase in the heat-treated samples containing x?2 mol% Fe₂O₃. Magnetic hysteresis cycles of the glass-ceramic samples were obtained with a maximum applied field of ±20 kOe as well as a low field of ±500 Oe, in order to evaluate the potential of these glass ceramics for hyperthermia treatment of cancer. Samples with x>2 mol% of iron oxide exhibited magnetic behavior similar to soft magnetic materials with low coercivity. The evolution of magnetic properties in these samples as a function of iron oxide molar concentration is correlated with the amount and crystallite size of magnetite phase present in them.     

Sol-gel preparation and characterization of CoFe2O4-SiO2 nanocomposites

Magnetic nanocomposites formed by cobalt ferrite particles dispersed in a silica matrix were prepared by a sol-gel process. The effects of the thermal treatment temperature and the salt concentration on the structural and magnetic properties of the composites were investigated. By controlling these parameters, CoFe₂O₄/SiO₂ nanocomposites with different crystallite size and magnetic properties were obtained. By increasing the annealing temperature and salt concentration, composites with a progressive increase in the coercive field and of the density of magnetization were produced. In particular, a nanocomposite, with a Fe/Si molar concentration of 21%, obtained by drying the gel at 150 °C and further annealing at 800 °C, has a coercivity of 2000 Oe, which is more than twice higher than the coercivity of bulk cobalt ferrite.     

Ionic conductivity and electrochemical stability of poly(methylmethacrylate)-poly(ethylene oxide) blend-ceramic fillers composites

The role of inorganic ceramic fillers namely nanosized Al₂O₃ (15-25 nm) and TiO₂ (10-14 nm) and ferroelectric filler SrBi₄Ti₄O₁₅ (SBT CIT) (0.5 μm) synthesized by citrate gel technique (CIT) on the ionic conductivity and electrochemical properties of polymer blend 15 wt% PMMA+PEO₈:LiClO₄+2 wt% EC/PC electrolytes were investigated. Enhancement in conductivity was obtained with a maximum of 0.72×10⁻⁵ S cm⁻¹ at 21 °C for 2 wt% of SrBi₄Ti₄O₁₅ (SBT CIT) composite polymer electrolyte. The lithium-ion transport number and the electrochemical stability of the composite polymer electrolytes at ambient temperature were analyzed. An enhancement in electrochemical stability was observed for polymer composites containing 2 wt% of SrBi₄Ti₄O₁₅ (SBT CIT) as fillers.     

Magnetic behavior of MnCo2O4+δ spinel obtained by thermal decomposition of binary oxalates

Manganese cobaltites MnCo₂O_4.62 and MnCo₂O_4.275 having a spinel structure were studied by measuring magnetization, AC susceptibility and by XANES spectroscopy. These compounds were synthesized by decomposition of the binary oxalate Mn_1/3Co_2/3C₂O₄·2H₂O in air at 220 and 500 °C, respectively. It was found that the differences in magnetic characteristics of these cation-deficient spinels are due mainly to variations in the degree of oxidation of manganese. It was shown that the complex oxide MnCo₂O_4.62 formed right after decomposition of the binary oxalate contains about 5×10⁻⁴ mass% metallic cobalt, which determines the dependence of magnetic susceptibility χ on the magnetic field at 300 K. The magnetic transition peculiar to the stoichiometric spinel MnCo₂O₄ at 183 K decreases to 167.5 K for MnCo₂O_4.275 and 67.5 K for MnCo₂O_4.62.     

Pillaring and photocatalytic properties of mesoporous α-Fe2O3/titanate nanocomposites via an exfoliation and restacking route

Mesoporous α-Fe₂O₃-pillared titanate nanocomposites have been successfully synthesized through an exfoliation−restacking route. Powder X-ray diffraction and N₂ adsorption-desorption isotherms revealed that the α-Fe₂O₃ pillared titanate has an interlayer distance of 3.27 nm, a specific surface area of 66 m²/g and an average pore size of 7.6 nm, suggesting the formation of a mesoporous pillared structure. UV-vis diffuse reflectance spectra show a red shift, indicative of a narrow band gap energy of ∼2.1 eV compared to the host layered titanate, which is essential in creating a visible light photocatalytic activity. The results of degradation of rhodamine B reveal that the present pillared mesoporous composites exhibit better photocatalytic activities than those of the pristine materials under visible irradiation, based on the band gap excitement and the dye-sensitized path, originated from their high surface area, mesoporosity and the electronic coupling between the host and the guest components.     

A study of the effect of ZrO2 on the magnetic properties of FePt/ZrO2 multilayer

Fe_xPt_100−x(30 nm) and [Fe_xPt_100−x(3 nm)/ZrO₂]₁₀ (x = 37, 48, 57, 63, 69) films with different ZrO₂ content were prepared by RF magnetron sputtering technique, then were annealed at 550 °C for 30 min. This work investigates the effect of ZrO₂ doping on the microstructural evolution, magnetic properties, grain size, as well as the ordering kinetics of FePt alloy films. The as-deposited films behaved a disordered state, and the ordered L1₀ structure was obtained by post-annealing. The magnetic properties of the films are changed from soft magnetism to hard magnetism after annealing. The variation of the largest coercivities of [Fe_xPt_100−x/ZrO₂]₁₀ films with the Fe atomic percentage, x and differing amounts of ZrO₂ content reveals that as we increase the ZrO₂ content we must correspondingly increase the amount of Fe. This phenomenon suggests that the Zr or O atoms of ZrO₂ preferentially react with the Fe atoms of FePt alloy to form compounds. In addition, introducing the nonmagnetic ZrO₂ can reduce the intergrain exchange interactions of the FePt/ZrO₂ films, and the interactions are decreased as the ZrO₂ content increases, the dipole interactions are observed in FePt/ZrO₂ films as the ZrO₂ content is more than 15%.     

Thermal stability of A-site ordered PrBaMn2O6 manganites

The crystal structure and electromagnetic properties as well as thermal stability of the A-site ordered PrBaMn₂O₆ manganites have been investigated. These samples have been prepared by using ‘two-steps’ synthesis mode. They have tetragonal structure with no tilt of MnO₆ octahedra and show ferromagnetic metal to paramagnetic semiconductor transition. The most significant structural feature of the A-site ordered manganites is that the MnO₂ sublattice is sandwiched by two types of rock-salt layers PrO and BaO. The different degree of Pr and Ba ions in the A-sublattice is revealed. The A-site ordered PrBaMn₂O₆ sample with maximum degree of the A-site order demonstrates ferromagnetic metallic to paramagnetic insulating transition with the Curie point ∼320 K. The A-site disordered Pr_0.50Ba_0.50MnO₃ sample is ferromagnetic metal below T_C≈140 K. The cation order in these compounds is stable in air up to 1300 °C. For the partly A-site ordered samples the magnetic and electronic phase separation is observed. The magnetotransport properties of the A-site ordered manganites treated under different conditions are discussed in terms of the superexchange interactions and A-site order degree.     

Structural and magnetic ordering in the two-dimensional coordination polymer Co(ox)(bpy-d8), (ox=C2O4, bpy-d8=4,4′-bipyridine-d8)

Neutron diffraction and magnetic susceptibility studies of the two-dimensional coordination polymer Co(ox)(bpy-d8) are presented, where ox=C₂O₄²⁻ and bpy-d8=4,4′-bipyridine-d8 (fully deuterated). The neutron powder diffraction data reveal a second-order crystallographic phase transition at 290 K. Above 290 K, a disordered structure, space group Immm, is observed that is closely related to the ordered structure previously proposed on the basis of single crystal X-ray diffraction. At low temperatures, the structure is an ordered variant of the high-temperature phase with space group I222. In both phases, the Co ions are linked by the oxalate forming infinite chains that are crosslinked by the bpy ligands.The magnetic susceptibility follows qualitatively a quasi one-dimensional chain behavior. It exhibits a broad maximum around 35 K, corresponding to a strong antiferromagnetic coupling through the oxalate bridges. A kink at 9 K marks the onset of long-range antiferromagnetic ordering due to much weaker interchain magnetic interactions.The magnetically ordered structure determined from the low-temperature neutron diffraction data can be described with the propagation vector (1/2, 1/2, 1/2), i.e. a doubling of the unit cell in each principal direction. It is concluded that a significant antiferromagnetic interaction is mediated through the bpy ligands, although the Co-Co distance along these bridges is 11.4 Å.     

Piezoresponse force microscopy and magnetic force microscopy characterization of γ-Fe2O3-BiFeO3 nanocomposite/Bi3.25La0.75Ti3O12 multiferroic bilayers

The multiferroic behavior of epitaxial γ-Fe₂O₃-BiFeO₃ (composite)/Bi_3.25La_0.75Ti₃O₁₂ bi-layered heterostructures grown on SrRuO₃/SrTiO₃ (1 1 1) substrates has been studied using piezoresponse force microscopy, magnetic force microscopy and magnetometry. The ferroelectric domain structure is ascribed to the BiFeO₃ phase while the magnetism originates in the γ-Fe₂O₃ phase of the composite layer. Our studies demonstrate the presence and switching of magnetic and ferroelectric domains within the same area of the sample. This confirms the presence of multiferroic behavior at the nanoscale in our γ-Fe₂O₃-BiFeO₃ nanocomposite thin films.     

Low-temperature sintering and microwave dielectric properties of Ca2Zn4Ti15O36 ceramics

The sintering behavior, microstructures, and microwave dielectric properties of Ca₂Zn₄Ti₁₅O₃₆ ceramics with B₂O₃ addition were investigated. The crystalline phases and microstructures of Ca₂Zn₄Ti₁₅O₃₆ ceramics with 0-10 wt% B₂O₃ addition were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The sintering temperature of Ca₂Zn₄Ti₁₅O₃₆ ceramic was lowered from 1170 to 930 °C by 10 wt% B₂O₃ addition. Ca₂Zn₄Ti₁₅O₃₆ ceramics with 8 wt% B₂O₃ addition sintered at 990 °C for 2 h exhibited good microwave dielectric properties, i.e., a quality factor (Qf) 11,400 GHz, a relative dielectric constant (ε_r) 41.5, and a temperature coefficient of resonant frequency (τ_f) 94.4 ppm/°C.     

Effect of SnO2 coating on the magnetic properties of nanocrystalline CuFe2O4

Nanocrystalline CuFe₂O₄ and CuFe₂O₄/xSnO₂ nanocomposites (x=0, 1, 5 wt%) have been successfully synthesized by one-pot reaction of urea-nitrate combustion method. The transmission electron microscope study reveals that the particle size of the as synthesized CuFe₂O₄ and CuFe₂O₄/5 wt%SnO₂ are 10 and 20 nm, respectively. The SnO₂ coating on the nanocrystalline CuFe₂O₄ was confirmed from HRTEM studies. The resultant products were sintered at 1100 °C and characterized by XRD and SQUID for compound formation and magnetic studies, respectively. The X-ray diffraction pattern shows the well-defined sharp peak that confirms the phase pure compound formation of tetragonal CuFe₂O₄. The zero field cooled (ZFC) and field cooled (FC) magnetization was performed using SQUID magnetometer from 2 to 350 K and the magnetic hysteresis measurement was carried out to study the magnetic properties of nanocomposites.