Angular-dependent remanent magnetization curve for perpendicular magnetic recording media determined by precise polar-Kerr detection system

We developed the polar-Kerr detection system and evaluated the angular dependence of magnetization curves with applied field of various directions during the newly developed system. The polar-Kerr detection system enabled precise evaluation of angular dependence of remanent coercivity (H_cr), as compared with the conventional VSM system. In addition, a cusp appeared in polar-Kerr hysteresis loop was observed to originate magnetization reversal by the thermal agitation.     

Development of an engineering model for ferromagnetic shape memory alloys

This paper presents a relationship among stress, temperature and magnetic properties of a ferromagnetic shape memory alloy. In order to derive an engineering model of ferromagnetic shape memory alloys, we have developed a measuring system of the relationship among stress, temperature and magnetic properties. The samples used in this measurement are Fe68–Ni10–Cr9–Mn7–Si6 wt% ferromagnetic shape memory alloy. They are thin ribbons made by rapid cooling in air. In the measurement, the ribbon sample is inserted into a sample holder winding consisting of the B-coil and compensation coils, and magnetized in an open solenoid coil. The ribbon is stressed with attachment weights and heated with a heating wire. The specific susceptibility was increased by applying tension, and slightly increased by heating below the Curie temperature.     

Study on magnetization reversal of cobalt nanowire arrays by magnetic force microscopy

The magnetic properties of self-assembly cobalt nanowire arrays formed in anodic porous alumina template were investigated by nanosize imaging method and macroscopic magnetic measurement. We have successfully made a wire-by-wire observation of magnetization reversal of a cobalt nanowire array using magnetic force microscopy with a home-made FePt tip. The nanowires in this medium have uniaxial anisotropy with easy axis along the wire due to the large aspect ratio of the wires (30 nm in diameter and 300 nm in length). Considering the nanowires as single-domain structures, we can obtain the average DC demagnetization curve from nanosize images by calculating the number of wires in each magnetized direction, and the results agreed well with the DC demagnetization curve measured by macroscopic measurement. The magnetostatic field between wires was evaluated by a new nanosize imaging method. Macroscopic measurement shows that reversible magnetization occurs in this medium. Nanosize images of the remanent and saturated states prove that the reversible magnetization processes mainly take place inside individual wires and reversed wires induced by magnetostatic field just give a little contribution to the reversible magnetization.     

Analytic construction of magnetic multipoles from cylindric permanent magnets

We discuss an analytic method for the design of three-dimensional magnetic multipoles from permanent magnet materials. The concept is explicited with an idealized, continuously varying magnetization. The effect of segmentation for realistic implementations is discussed. As an example we present an open, experimentally accessible cylindric structure for a dipole and a quadrupole field with high purity. The fields are useful over several cm³.     

Optically induced magnetization in diluted magnetic quantum dots

We report the effect of intense laser field on donor impurities in a semimagnetic Cd_1-xinMn_xinTe/Cd_1-xoutMn_xoutTe quantum dot. The spin polaronic energy of different Mn²⁺ is evaluated for different dot radii using a mean field theory in the presence of laser field. Magnetization is calculated for various concentrations of Mn²⁺ ions with different dot sizes. Significant magnetization of Mn spins can be obtained through the formation of polarized exciton magnetic polarons (EMPs). A rapid decrease of the laser dressed donor ionization energy for different values of dot sizes with increasing field intensity is predicted. Also, it is found that the polarization of EMPs increases rapidly at higher excitation energies.     

Laser-assisted mechanical texturing of magnetic media

Mechanical texturing is the dominant technique for texturing magnetic media and is widely used in current hard disk drive manufacturing processes. This technique possesses the advantages of easy operation and low cost. However, it has an inherent disadvantage since mechanical texturing leads to jagged profiles randomly generated on hard disk surfaces, which precludes its further use in low-fly-height cases. A laser-assisted process working at near-threshold fluences for mechanical texturing was proposed to buff the irregular profiles of mechanical textures formed on Ni-P disk surfaces using a KrF excimer laser (λ=248 nm,τ=23 ns). This process, based on selective melting of the Ni-P surfaces due to inhomogeneous deposition of laser energy, was found to be capable of improving the surface characteristics of mechanically textured Ni-P disks. VSM and XRD analyses demonstrated that magnetic and structural properties of the Ni-P surfaces would not be affected in a detrimental way so as to influence the recording features of the magnetic media after laser buffing. Received: 28 November 2000 / Accepted: 12 December 2000 / Published online: 3 April 2001     

The effect of randomly oriented anisotropy on the zero-field-cooled magnetization of a non-interacting magnetic nanoparticle assembly

A model based on localized partition function and master equation was set up to calculate the zero-field-cooled (ZFC) and field-cooled (FC) curves of a non-interacting magnetic nanoparticle assembly with randomly oriented anisotropy. The peak temperature of the ZFC curve corresponds to the highest energy barrier that acts against the unblocking process, and could be described well by an equation covering the heating rate effect. The predicted H^2/3 field dependence of the peak temperature is in good agreement with published results.     

Effect of sample shape on nonlinear magnetization dynamics under an external magnetic field

Effect of sample shape on the nonlinear collective dynamics of magnetic moments in the presence of oscillating and constant external magnetic fields is studied using the Landau–Lifshitz–Gilbert (LLG) approach. The uniformly magnetized sample is considered to be an ellipsoidal axially symmetric particle described by demagnetization factors and uniaxial crystallographic anisotropy formed some angle with an applied field direction. It is investigated as to how the change in particle shape affects its nonlinear magnetization dynamics. To produce a regular study, all results are presented in the form of bifurcation diagrams for all sufficient dynamics regimes of the considered system. In this paper, we show that the sample's (particle's) shape and its orientation with respect to the external field (system configuration) determine the character of magnetization dynamics: deterministic behavior and appearance of chaotic states. A simple change in the system's configuration or in the shapes of its parts can transfer it from chaotic to periodic or even static regime and back. Moreover, the effect of magnetization precession stall and magnetic moments alignment parallel or antiparallel to the external oscillating field is revealed and the way of control of such “polarized” states is found. Our results suggest that varying the particle's shape and fields’ geometry may provide a useful way of magnetization dynamics control in complex magnetic systems.     

Dipolar and magnetic ordering in Nd-modified BiFeO3 nanoceramics

The polycrystalline samples of Bi_1−xNd_xFeO₃ (BNFO) with x=0, 0.05, 0.1, and 0.15 were prepared by a chemical route (metal ion complex precursor solution method). A systematic change in crystal structure from rhombohedral to tetragonal on increasing Nd substitution was observed. The reduction of low-frequency dispersion in permittivity and loss pattern due to Nd substitution in BiFeO₃ (BFO) was observed in its dielectric response curve. The loss tangent (tan δ) was found to be reduced on increased Nd concentration in BNFO. Dielectric anomaly near the reported Neel temperature of BFO and peaks in all the BNFO samples were observed in the permittivity vs. temperature graph. Significant opening in the room temperature M–H loop was observed on Nd substitution, which was more prominent for higher concentration of Nd.     

Generation of cylindrically symmetric magnetic fields with permanent magnets and µ-metal

A method that allows the calculation of magnetic fields produced by cylindrically symmetric configurations of permanent magnets and high permeability materials is presented. The method is based on a non-iterative finite-element algorithm and can be utilized on small-scale computing facilities. As an example, the design of a magnetic trap for neutral atoms is discussed. Comparisons of calculations with analytical and experimental data are also reported.     

Comparison of discharge lamp and laser pumped cesium magnetometers

We have performed a comparison of laser (LsOPM) and lamp (LpOPM) pumped cesium vapor magnetometers. Although the LsOPM operated 50% above its shot-noise limit we found an intrinsic sensitivity of 15 fT/√Hz and 25 fT/√Hz for the LsOPM and the LpOPM, respectively. Two modes of operation, viz. the phase-stabilized and the self-oscillating modes, were investigated and found to yield a similar performance. We have compared the performance of the LsOPM and the LpOPM directly by simultaneous measurements of field fluctuations of a 2-μT magnetic field inside a multilayer magnetic shield and have used one of the magnetometers for an active field stabilization. In the stabilized mode we found a gradient instability of 25 fT within an integration time of 100 s, which represents an upper limit of the long-term stability of the magnetometers. Our research is motivated by the need for an improved control of magnetic fields and gradients in a planned neutron electric dipole experiment.This revised version was published online in August 2005 with a corrected cover date.     

Characterization of different magnetite–cobalt nanoparticles in hydrocarbon-based magnetic fluids by means of static and dynamic magnetization measurements

Magnetic nanoparticles with different compositions (Co_xFe_3−xO₄, 0?x?0.1) were synthesized from metal salts using a coprecipitation technique to produce magnetic fluids following a peptization technique. The liquid carrier was the hydrocarbon Isopar M and the surfactant was oleic acid. The colloidal-sized ferrimagnetic nanoparticles produced were found to be superparamagnetic. Measurements of the complex magnetic susceptibility were carried out to evaluate the resonant frequency f_res, the anisotropy constant K, and anisotropy field H_A. f_res was found to be a linear function of the cobalt content of the magnetic nanoparticles over the range of cobalt content studied.     

Effect of GePt buffer layer on magnetic properties and microstructure of FePt films

We have explored the interlayer diffusion effect of Ge/FePt, GePt/FePt bilayer on the formation of ordered L1₀ FePt phase. In Ge/FePt bilayer, the Ge₃Pt₂ compound was formed during post annealing at 400^oC for 1.0 h. Diffusion between Ge and FePt layer suppres the formation of ordered L1₀ FePt phase. With Ge₂Pt₃ underlayer, the FePt film was ordered at 400 °C and the in-plane coercivity was 9.3 kOe. The ordering temperature was reduced about 50 °C compared to the single layer FePt film.     

Effects of cation size disorder and lattice distortion on metamagnetism in phase-separated manganites

The effects of A-site cation size disorder in ABO₃ type charge-ordered and antiferromagnetic Pr_0.5Ca_0.5MnO₃ system have been studied by substituting La³⁺, Sr²⁺ or Ba²⁺, while keeping the valency of Mn ions and the tolerance factor (t=0.921) constant in the substituted compounds. We find that the substitutions by these larger cations induce successive sharp step-like metamagnetic transitions at 2.5 K. The critical field for metamagnetism is the lowest for 3% Ba substituted compound, which has the largest A-site cation size disorder and the least distorted MnO₆ octahedra, among the compounds reported here. These cation substitutions give rise to ferromagnetic clusters within antiferromagnetic matrix, indicating phase-separation at low temperatures. The growth of the clusters is found to vary with the substitution amount. The local lattice distortion of MnO₆ octahedra enhances the charge ordering temperature and reduces the magnetization at high fields (>1 T) in these manganites.     

Effect of the surface anisotropy and the shape on the magnetization behavior in an egg-shaped nanoparticle

Using the classical Heisenberg model and Monte Carlo simulation, we compute the magnetization behavior of a ferromagnetic nanoparticle with an egg-shape in an external magnetic field along the symmetry axis. The particle is in a single-domain state with a surface anisotropy axis perpendicular to the surface of the particle. At low temperature, it is found that exchange bias appears in the hysteresis loop, which does not exist in the spherical and ellipsoidal nanoparticles. The bias field produced by the frozen spins on the surface of the egg-shaped nanoparticle may be the reason to produce the phenomenon of the exchange bias.     

Enhancement of surface magnetization in antiferromagnetic nanoparticles

We report enhancement of magnetization below the antiferromagnetic ordering temperature T_N in nanoparticles of two antiferromagnets, viz CoRh₂O₄ and Cr₂O₃. The enhancement of magnetization below T_N is systematic, being larger for sample with smaller particle size. Scaling analysis showed that such enhancement of magnetization in CoRh₂O₄ nanoparticles is due to the superparamagnetic type contribution of surface (shell) spins. The present work shows that similar analysis can also be applied in Cr₂O₃ nanoparticles.     

A laser-pumped magnetometer for the mapping of human cardiomagnetic fields

Magnetic fields produced by biological organisms contain valuable information on the underlying physiological processes and their pathologies. Currently, superconducting detectors cooled far below room temperature are required to measure these generally weak biomagnetic signals. We have developed a sensitive laser magnetometer based on optical pumping of cesium atoms that makes it possible to map the magnetic field produced by the beating human heart. A gradiometer formed by two identical sensors greatly reduces the influence of external stray magnetic fields. The magnetometer operates at room temperature and therefore opens the way to affordable and convenient monitoring of biomagnetic fields in research and medical diagnostics. Received: 8 January 2003 / Published online: 26 February 2003 RID="*" ID="*"Corresponding author. Fax: +41-26/300-9631, E-mail: robert.wynands@unifr.ch     

Magnetostriction measurements on the multidirectional magnetization performance of SiFe steel

By means of a 3-phase excited rotational single sheet tester in combination with three sets of strain gauges, multi-directional magnetostriction (MS) was studied for highly grain oriented (HGO) SiFe. Emphasis was put on a new type of material with hyper-stress coating based on titanium nitride. Experiments were performed for elliptical, Lozenge-type and circular magnetization. In all states that are relevant for practice, the new type showed lowest levels of MS, especially for the rolling direction and the normal direction. By means of a domain model, which is based on the results of MS, the superior behavior is explained by a suppression of oblique domains.