A magnetic, magnetostrictive and Mössbauer study of Tb0.3Dy0.7−xPrx(Fe0.9Al0.1)1.95 alloys

The effect of Pr substitution for Dy on the magnetization, magnetostriction, anisotropy and spin reorientation of a series of Tb_0.3Dy_0.7−xPr_x(Fe_0.9Al_0.1)_1.95 alloys (x=0, 0.1, 0.20, 0.25, 0.30, 0.35) at room temperature has been investigated. It was found that the magnetization and magnetostriction of the homogenized Tb_0.3Dy_0.7−xPr_x(Fe_0.9Al_0.1)_1.95 alloys decreases drastically with increasing x and the magnetostrictive effect disappears for x>0.2, but the spontaneous magnetostriction λ₁₁₁ increases approximately linearly with increasing x. Moreover, the magnetostriction exhibits slightly bigger value at x=0.1 than the free alloys and is saturated more easily with the magnetic field H, showing that a small amount of Pr substitution is beneficial to a decrease in the magnetocrystalline anisotropy. The analysis of the Mössbauer spectra indicated that the easy magnetization direction in the {1 1 0} plane deviates slightly from the main axis of symmetry with Pr concentration x, namely spin reorientation. Comparing with the Al substitution, the effect of Pr substitution for Dy on the spin reorientation is smaller.     

Magnetic transitions and magnetostrictive properties of Laves compounds Sm0.88Nd0.12(Fe1−xCox)1.93

The structure, magnetic and magnetostrictive properties of Sm_0.88Nd_0.12(Fe_1−xCo_x)_1.93 (0≤x≤1.0) alloys have been investigated. The alloys have the cubic MgCu₂ structure over the whole composition range and the lattice parameter a decreases with increasing x. For 0≤x≤0.2, substitution of Co for Fe slightly increases the saturation magnetization M_s and Curie temperature T_c, while further substitution causes a decrease in both M_s and T_c. The spin reorientation is observed, and a phase diagram for the spin configurations of the Sm_0.88Nd_0.12(Fe_1−xCo_x)_1.93 system is determined. The spontaneous magnetostriction λ₁₁₁ increases as x is increased, while a monotonic decrease of the saturation magnetostriction λ_s with x originates from the increase of λ₁₀₀ with opposite sign to that of λ₁₁₁, which may be caused by the filling of the d band due to Co substitution.     

Structure and magnetostriction of Tb0.2Pr0.8(Fe0.4Co0.6)1.93−xCx intermetallic compounds

The structure and magnetostriction of Tb_0.2Pr_0.8(Fe_0.4Co_0.6)_1.93−xC_x intermetallic compounds were studied by X-ray diffraction and magnetic measurements. Almost a single cubic Laves phase forms in the alloys for x ≤0.20, and a small amount of C can inhibit the formation of the 1:3 phase. The lattice parameter increases when 0≤x≤0.15, while the T_c and the spontaneous magnetization decreases with increasing x. The lattice parameter decreases slowly when 0.15≤x≤0.30, while the T_c decreases evidently with increasing x. The magnetostriction λ_a (=λ_∥-λ_⊥) is improved at low magnetic fields at room temperature for the compounds with 0.05≤x≤0.10, indicating that these C-containing compounds are promising magnetostrictive materials.     

High magnetostriction at low fields of (Tb1−xDyx)0.2Pr0.8(Fe0.4Co0.6)1.88C0.05 intermetallic compounds

The structure and magnetostriction of the (Tb_1−xDy_x)_0.2Pr_0.8(Fe_0.4Co_0.6)_1.88C_0.05 intermetallic compounds (0≤x≤1) were studied by X-ray diffraction and magnetic measurements. The formation of an approximate single Laves phase with a MgCu2-type cubic structure was observed in this series of compounds. It was found that the Curie temperature and the saturation magnetization of the compounds would decrease with increase in the Dy content up to x=1. The magnetostriction λ_a (λ_a=λ_‖-λ_⊥) gently rises when x≤0.6, and follows with a precipitous fall when x exceeds 0.6, with the highest value of λ_a being reached in the compounds with x=0.6. The magnetostriction of all the samples was observed to approach their own saturation in the magnetic fields higher than 4 kOe. This indicates that the addition of a small amount of Dy could effectively improve the low-field magnetostriction of the Tb_0.2Pr_0.8(Fe_0.4Co_0.6)_1.88C_0.05 compounds, which could become a kind of promising magnetostrictive material.     

Magnetostriction, Curie temperature and microstructure of Tb0.29(Dy1−xPrx)0.71Fe1.97 oriented alloys

The Tb_0.29(Dy_1−xPr_x)_0.71Fe_1.97 (x=0, 0.1, 0.2 and 0.3) alloys were prepared by directional solidification method. The orientation, magnetostriction λ, Curie temperature T_c and microstructure of alloys were characterized by XRD, standard resistant strain gauge technique, VSM and SEM-EDS. The results reveal that the alloys have a preferred orientation of 〈1 1 0〉 and 〈1 1 3〉 direction when x>0. With the increase in Pr content, the T_c of alloys decreases gradually and the non-cubic phase appears, resulting in the decline of λ dramatically, from 1935.2×10⁻⁶ for x=0 to 695.9×10⁻⁶ for x=0.3 at a compressive stress of 6 MPa and a magnetic field of H=240 kA m⁻¹.     

The effect of boron on the structure and magnetic properties of Pr0.15Tb0.3Dy0.55Fe1.85 alloy

The structure, Curie temperature and magnetostriction of Pr_0.15Tb_0.3Dy_0.55Fe_1.85−xB_x   (x=0–0.3$x=0–0.3$) alloys have been investigated using X-ray diffraction, AC susceptibility and standard strain gauge techniques. It was found that all the samples possess entirely MgCu₂-type cubic Laves structure. With increasing B concentration, the lattice parameter decreases, while the Curie temperature remains unchanged. The magnetostriction of Pr_0.15Tb_0.3Dy_0.55Fe_1.85−xB_x alloys at room temperature increases with increasing B concentration firstly, and then decreases slightly.     

Magnetic domain structure in Fe78.8−xCoxCu0.6Nb2.6Si9B9 nanocrystalline alloys studied by Lorentz microscopy

The magnetic domain structures of Fe_78.8−xCo_xCu_0.6Nb_2.6Si₉B₉ (x=0, 20, 40, 60) alloys are investigated by Lorentz microscopy coupled with the focused ion beam method. The specimen prepared using the FIB method is found to have a considerably more uniform thickness compared to that prepared using the ion-milling method. In Fe_38.8Co₄₀Cu_0.6Nb_2.6Si₉B₉ and Fe_18.8Co₆₀Cu_0.6Nb_2.6Si₉B₉ alloys, 180° domain walls extending in the direction of the induced magnetic anisotropy are observed. Analysis with Lorentz microscopy reveals that the width of the magnetic domains decreases with an increase in the cobalt content or the induced magnetic anisotropy K_u, that is, the domain width d is proportional to the induced magnetic anisotropy (K_u)^−1/4. On the other hand, in the in situ Lorentz microscopy observation as a function of temperature, magnetic ripple structures are found to appear in a localized area due to the fluctuation of magnetization vectors from 423 K. It is observed that the induced magnetic anisotropy caused by the applied magnetic field at 803 K is not suppressed by the magnetic ripple structures observed at 423–443 K.     

Magnetic properties and magnetocaloric effect in Dy(Co1−xFex)2 alloys

Polycrystalline samples of Laves-phase alloys Dy(Co_1−xFe_x)₂(x=0$x=0$, 0.02,0.04,0.06,0.08) have been prepared by arc-melting method. No first order phase transition was observed for samples with x≠0$x\ne 0$. With the increase of Fe content, the Curie temperature increases greatly, while the calculated magnetic entropy change, ΔS_M, shows an obvious decrease with a broader peak. The origin of the magnetocaloric effect in Dy(Co_1−xFe_x)₂ alloys has been discussed.     

Structure and magnetic properties of (Nd,Dy)16(Fe,Co)76−xTixB8 powders prepared by mechanical alloying

Nanocrystalline (Nd,Dy)₁₆(Fe,Co)_76−xTi_xB₈ magnets were prepared by mechanical alloying and respective heat treatment at 973–1073 K/30–60 min. An addition of 0.5 at % of Ti results in an increase of coercivity from 796 to 1115 kA m⁻¹. Partial substitution of Nd by Dy results in an additional increase of coercivity up to 1234 kA m⁻¹. Mössbauer investigations shows that for x?1 the (Nd,Dy)₁₆(Fe,Co)_76−xTi_xB₈ powders are single phase. For higher Ti contents (x>1) the mechanically alloyed powders heat treated at 973 K are no more single phase, and the coercivity decreases due to the presence of an amorphous phase. A heat treatment at a higher temperature (1073 K) for longer time (1 h) results in the full recrystallisation of powders. The mean hyperfine field of the Nd₂Fe₁₄B phase decreases for titanium contents of 0?x?1, and remains constant for x>1. This indicates that the Ti content in the Nd₂Fe₁₄B phase reaches its maximum value.     

Structural, magnetic properties and magnetostriction studies of Sm1−xNdxFe1.55 alloys

Structural, magnetic properties and magnetostriction studies of Sm_1−xNd_xFe_1.55 (0≤x≤0.56) alloys have been performed. X-ray diffraction analysis confirms the presence of single cubic Laves phase in Sm_1-xNd_xFe_1.55 alloys with 0≤x≤0.48. The lattice parameter of alloys increases linearly with increase in Nd content while the Curie temperature behaves in the opposite way. The alloy x=0.08 exhibits a giant magnetostriction value (λ_∥-λ_⊥) of −2187 ppm at a magnetic field of 12 kOe due to the anisotropy compensation between Sm³⁺ and Nd³⁺ ions.     

Magnetic properties of the Pr1−xGdxCo4B compounds

In this work, we have investigated the effect of the substitution of Gd for Pr on the crystal structure and magnetic properties of the Pr_1−xGd_xCo₄B compounds for 0?x?1 using X-ray powder diffraction, magnetic measurements, and differential scanning calorimetry (DSC). These compounds have hexagonal CeCo₄B-type structure with the space group P6/mmm. The substitution of Gd for Pr leads to a decrease of the unit-cell parameters a and the unit-cell volume V, while the unit-cell parameter c increases slightly. Magnetic measurements indicate that all samples are ordered magnetically below room temperature. The Curie temperatures determined by DSC technique increase as Pr is substituted by Gd. The saturation magnetization at 5 K decreases upon Gd substitution up to x=0.6, and then increases again.     

Synthesis and characterization of Ni1−xCoxFe2O4 nanoparticles

Ni_1−xCo_xFe₂O₄ (x=0.6, 0.8 and 0.9) nanoparticles have been synthesized with various crystallite sizes depending on the thermal treatments and composition (cobalt content) using the sol-gel combustion method. The size of nanoparticles has been controlled by thermal treatment. On the other hand, the magnetic property of the ferrite has been controlled by changing the heat treatment. Morphology and particle sizes of Ni_1−xCo_xFe₂O₄ have been studied using atomic force microscopy (AFM) and transmission electron microscopy (TEM). The presence of functional group has been identified by Fourier Transform Infrared (FTIR) spectra. From TGA-DTA studies, the weight gains of Ni_1−xCo_xFe₂O₄ nanoparticles have been observed and it might be due to capping organic molecules with oxygen at temperatures above 200 °C. Magnetic properties of Ni_1−xCo_xFe₂O₄ particles have been analysed using VSM and it is found that saturation magnetization (M_s) has increased with particle size and has coercivity (H_c) increased initially and then decreased. The M_s and H_c values decreased with the increase of content of cobalt in Ni_1−xCo_xFe₂O₄.     

Structural and magnetic properties of Co1−xZnxFe2O4 nanoparticles by co-precipitation method

Co_1−xZn_xFe₂O₄ nanoparticles were prepared by co-precipitation method with x varying from 0 to 1.0. The powder samples were characterized by X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and Fourier transform infrared spectroscopy (FTIR). The average crystallite sizes of the particles were determined from XRD. X-ray analysis showed that the samples were cubic spinel. The average crystallite size (D_aveXR) of the particles precipitated was found to vary from 6.92 to 12.02 nm decreasing with the increase in zinc substitution. The lattice constant (a_o) increased with the increase in zinc substitution. The specific saturation magnetization (M_S) of the particles was measured at room temperature. The magnetic parameters such as M_S, H_c, and M_r were found to decrease with the increase in zinc substitution. FTIR spectra of the Co_1−xZn_xFe₂O₄ with x varying from 0 to 1.0 in the range 400–4000 cm⁻¹ were reported. The spinel structure and the crystalline water adsorption of Co_1−xZn_xFe₂O₄ nanoparticles were studied by using FTIR.     

Magnetoresistive properties of Zn1−xCoxFe2O4 ferrites

The magnetic and magnetoresistive properties of spinel-type Zn_1−xCo_xFe₂O₄ (x=0, 0.2 and 0.4) ferrites are extensively investigated in this study. A large negative magnetoresistance (MR) effect is observed in Zn_1−xCo_xFe₂O₄ ferrites of spinel structure. These materials are either ferrimagnetic or paramagnetic at room temperature, and show a spin-(cluster) glass transition at low temperatures, depending on the chemical compositions. The MR curves as a function of magnetic fields, MR(H), are parabolic at all temperatures for paramagnetic polycrystalline ZnFe₂O₄. The MR for ZnFe₂O₄ at 110 K in the presence of 9 T applied magnetic field is 30%. On the other hand, MR(H) are linear for x=0.2 and 0.4 ferrimagnetic Zn_1−xCo_xFe₂O₄ samples up to 9 T. The MR effect is independent of the sintering temperatures, and can be explained with the help of the spin-dependent scattering and the Yafet–Kittel angle of Zn_1−xCo_xFe₂O₄ mixed ferrites.     

High Bs nanocrystalline Fe84−x−yCuxNbySi4B12 alloys (x=0.0-1.4, y=0.0-2.5)

In this study, Cu and Nb content dependences of magnetic properties for annealed Fe_84−x−yCu_xNb_ySi₄B₁₂ alloy ribbons fabricated by melt spinning were investigated. In Fe_83−xCu_xNb₁Si₄B₁₂ alloy systems, the coercivity H_c markedly decreases with increasing x and exhibits a minimum at around x=1.0-1.2, while the saturation magnetic flux density B_s shows a slight variation. In Fe_83−yCu₁Nb_ySi₄B₁₂ alloy systems, H_c markedly decreases at around y=0.5, while B_s shows a monotonic decrease. Fe₈₂Cu₁Nb₁Si₄B₁₂ nanocrystalline alloy ribbons exhibit a high B_s of 1.78 T and a low H_c of 3.2 A/m. The core losses of the present alloys at 1.0 T at 400 Hz, P_10/400, and at 1.0 T at 1 kHz, P_10/1k, are 1.3 and 4.4 W/kg, respectively.     

The influence of substitution of Co for Mn on magnetism of the HoMn6−xCoxSn6 compounds (0⩽x⩽0.25)

We have studied the effects of Co substitution for Mn on the structure and magnetic properties of the HoMn_6−xCo_xSn₆ compounds (0?x?0.25) with HfFe₆Ge₆-type structure (space group P6/mmm) by X-ray powder diffraction and magnetization measurements. A monotonic decrease of the lattice parameters a and c is observed with increasing Co content. While the compounds with x=0 and 0.05 exhibit ferrimagnetism in the whole temperature range, the compounds with 0.1?x?0.15 show ferrimagnetism, helimagnetism and re-entrant ferrimagnetism with decreasing temperature. For the compounds with x=0 and 0.05, the spin reorientation temperature is observed. A metamagnetic transition from helimagnetic magnetic ordering to ferrimagnetism is observed for the compounds with x=0.1 and 0.2. The results are summarized in the HoMn_6−xCo_xSn₆ magnetic phase diagram.     

Microstructure and some magnetic properties of bulk amorphous (Fe0.61Co0.10Zr0.025Hf0.025Ti0.02W0.02B0.20)100−xYx (x=0, 2, 3 or 4) alloys

Microstructure, revealed by X-ray diffraction, transmission electron microscopy and Mössbauer spectroscopy, and magnetic properties such as magnetic susceptibility, its disaccommodation, core losses and approach to magnetic saturation in bulk amorphous (Fe_0.61Co_0.10Zr_0.025Hf_0.025Ti_0.02W_0.02B_0.20)_100−xY_x (x=0, 2, 3 or 4) alloys in the as-cast state and after the annealing in vacuum at 720 K for 15 min. are studied. The investigated alloys are ferromagnetic at room temperature. The average hyperfine field induction decreases with Y concentration. Due to annealing out of free volumes its value increases after the heat treatment of the samples. The magnetic susceptibility and core losses point out that the best thermal stability by the amorphous (Fe_0.61Co_0.10Zr_0.025Hf_0.025Ti_0.02W_0.02B_0.20)₉₇Y₃ alloy is exhibited. Moreover, from Mössbauer spectroscopy investigations it is shown that the mentioned above alloy is the most homogeneous. The atom packing density increases with Y concentration, which is proved by the magnetic susceptibility disaccommodation and approach to magnetic saturation studies.     

Structure and magnetic phase diagram of mixed rare-earth Nd1−xTbxFe10.5Mo1.5 compounds

The structural and magnetic properties of Nd_1−xTb_xFe_10.5Mo_1.5 (x=0$x=0$, 0.2, 0.4, 0.6, 0.8, 1.0) compounds have been investigated by means of X-ray diffraction and magnetic measurements. All the investigated compounds crystallize in the tetragonal ThMn₁₂-type structure with I4/mmm space group. The lattice parameters a, c and the unit-cell volume V decrease with increasing x. The Curie temperatures T_C are almost independent x. There exists a unique spin-reorientation transition for the end compositions of Nd_1−xTb_xFe_10.5Mo_1.5 compounds with x=0$x=0$ and x=1$x=1$, while two spin-reorientation transitions are observed for x=0.2–0.8$x=0.2–0.8$. The room-temperature magnetocrystalline anisotropy of Nd_1−xTb_xFe_10.5Mo_1.5 compounds changes from uniaxial to planar with increasing x content. Based on magnetic measurements, a magnetic phase diagram of Nd_1−xTb_xFe_10.5Mo_1.5 compounds is constructed. By minimizing the magnetocrystalline anisotropy energy, a theoretical magnetic phase diagram for the Nd_1−xTb_xFe_10.5Mo_1.5 system is derived, showing a reasonable agreement with the observations.     

Effect of Nb addition on the structure and soft magnetic properties of melt-spun Co69Fe7Si14B10 alloy

Melt-spun ribbons of Co₆₉Fe₇Si_14−xNb_xB₁₀ alloys with x=0, 2 and 4 have been prepared and characterized for structure and soft magnetic properties. Ribbons with x=0 and x=2 are found to be completely amorphous whereas the ribbon with x=4 contains irregular shaped faulted Co₂Si orthorhombic phase with grain size of about 100 nm. Nb addition is found to decrease the degree of amorphicity and induce perpendicular anisotropy, deteriorating the soft magnetic and magnetoimpedance properties.     

Corrosion behavior of Nd9.4Pr0.6Febal.Co6B6Ga0.5TixCx (x=0, 1.5, 3, 6) nanocomposites annealed melt-spun ribbons

The effect of Ti and C additions on the corrosion behavior of Nd_9.4Pr_0.6Fe_bal.Co₆B₆Ga_0.5Ti_xC_x (x=0, 1.5, 3, 6) isotropic nanocomposite melt-spun ribbons in 3.5 wt% sodium chloride solution was studied. The melt-spun ribbons were annealed at 750 °C for 10 min in argon-filled quartz capsules. The microstructure of multiphase nanocrystalline samples and corrosion products was characterized using the X-ray diffraction and electron microscopy techniques. The electrochemical behavior was assessed using potentiodynamic polarization and electrochemical impedance spectroscopy. The results show that the addition of Ti and C increases the corrosion resistance of NdFeB ribbons; the best corrosion resistance was obtained for 1.5 wt% Ti and C content.