Magnetoelastic interactions in multilayer microwires

Amorphous magnetic microwires exhibit outstanding magnetic characteristics as giant Barkhausen jump or nearly non-hysteretic behaviour that make them very suitable as sensing elements in various devices. In this article, we overview the different families of microwires and summarise most relevant results in connection with the magnetoelastic interlayer interactions in multilayer microwires. Improved magnetic behaviour can be observed in bi-layer microwires consisting of a magnetic nucleus coated by insulating cover. By employing combined sputtering and electroplating techniques, a novel series of multilayered magnetic microwires have been recently introduced. They consist typically of a magnetic nucleus and several shells having insulating and/or metallic nature, the latter magnetic or not. The magnetic character of the multilayer microwire will then depend on the magnetoelastic coupling between layers. External layers induce compressive stresses on the soft amorphous nucleus resulting in induced axial or circular anisotropies depending on magnetostriction sign. In a similar way, reduction of measuring temperature results in tensile stress as a consequence of different thermal expansion coefficients of various layers.     

Co基金属纤维不对称巨磁阻抗效应

以直径32 μm的熔体抽拉Co基非晶金属纤维为研究对象, 分析了该纤维不同激励条件下的巨磁阻抗(giant magneto impedance, GMI)效应. 实验结果表明: 这类纤维的GMI效应具有不对称性特点, 即 AGMI (asymmetric GMI)效应. 同时, 发现AGMI效应随激励条件不同而变化, 随交流频率或者激励幅值升高而逐渐增强; 当存在一定偏置电压时, AGMI效应大幅增强. 通过研究纤维的磁化过程, 分析了Co基金属纤维的AGMI效应. 由于Co基熔体抽拉纤维具有螺旋各向异性以及磁滞的存在使得GMI效应具有不对称性, 频率升高或者激励电流幅值增加有利于壳层畴环向磁化, AGMI增强. 当在纤维两端施加偏置电压时, 偏置电流诱发环向磁场增强了环向磁化, AGMI效应提高; 偏置电压较低时磁场响应灵敏度提高, 同时磁化翻转向高场移动, 阻抗线性变化对应的直流磁场区间增大. 这一方面拓宽了GMI传感器工作区间及灵敏度, 另一方面不利于获得更大的磁场响应灵敏度. 10 MHz (5 mA)激励时, 施加1 V强度的偏置电压后, 对应的磁场灵敏度从616 V/T 提高至5687 V/T; 偏置电压为2 V时, 灵敏度降低到4525 V/T. 因此, 可以通过适当提高环向磁场的方法获得大的磁场响应灵敏度及阻抗变化线性区域.     

AC-current-induced magnetization switching in amorphous microwires

We studied the influence of AC current flowing through microwires, on magnetization dynamics. We used a previously developed Sixtus-Tonks modified setup to evaluate the domain wall (DW) velocity within the microwire. However, instead of a magnetizing solenoid, we used a current flowing through the microwire. We observed that the AC current flowing through the annealed Co-rich microwire leads to remagnetization by fast domain wall propagation. The estimated DW velocity was approximately 4.5 km/s, which is similar to and even higher than that reported for the magnetic-field-driven domain wall propagation in Fe- and Co-rich microwires. We measured the DW velocity under tensile stress, and found that the DW velocity decreases under applied stress. An observed DW propagation induced by the current flowing through the microwire is explained considering the influence of an Oersted magnetic field on the outer domain shell. This field has a circular easy magnetization direction and magnetostatic interaction between the outer circumferentially magnetized shell and the inner axially magnetized core.     

Interaction of bistable glass-coated microwires in different positional relationship

The amorphous ferromagnetic glass-coated microwires with positive magnetostriction constant of the metallic core possess the bistable magnetization reversal and the fast domain wall propagation along the microwire axis. These properties and also the magnetization processes in the systems of the microwires are of interest in the magnetic sensing technology, encoding systems and smart composite applications. In this work we present the results of the experimental investigation, simulations and theoretical estimations of the hysteresis process in the systems of the magnetically bistable microwires with different length and positional relationship between them. The location of the short microwires near the long microwire affects the switching fields (external coaxial magnetic field applied for starting of the domain wall propagation along the microwire axis) and the hysteresis process. The changes of these properties are not directly proportional to the value of the shorter microwire shift along the longer one. When the short microwire was placed in the middle of the long one and when the one end of the long microwire coincided with the end of the short one, the two-steps hysteresis loops were observed for both sample orientations: before and after sample rotation on 180°. When the short microwire was placed close to the end of the long microwire (but did not coincide with it) we observed at first the two-steps hysteresis loop and single step behavior for one branch of the hysteresis loop after sample rotation. Moreover, changing of the orientation of the samples results in the shift of the switching field of the shorter microwire when its end was located near the end or coincided with the end of the longer one. This uncommon hysteresis behavior was explained and illustrated using results of the simulations. The values of microwires interaction were also estimated.     

The influence of glass coating on the single domain wall potential in amorphous glass-coated Fe-based microwires

The effect of the glass coating on the single domain wall potential in amorphous glass-coated Fe-based microwire has been studied by the switching field distribution technique. The thermoactivated mechanism model is used to describe the thermally activated switching through the complex energy barrier in amorphous FeSiB microwires. Glass removal leads to the increase of the probability of the thermally activated switching pointing to the decrease of the energy barrier.     

Study of surface magnetic properties in Co-rich amorphous microwires

Magneto-optical investigations carried out on a Co-rich glass-covered amorphous microwire is presented. The appearance of circular magnetic bistability and the influence of tensile stress and high-frequency electric current on the surface magnetization reversal have been studied. The change of the mechanism of the magnetization reversal induced by the high-frequency electric current is also discussed.     

Study of domain structure and magnetization reversal after thermal treatments in Fe40Co38Mo4B18 microwires

We have studied the effect of thermal treatment on the magnetic domain structure and magnetic reversal process of amorphous and nanocrystalline Fe₄₀Co₃₈Mo₄B₁₈ microwires. The domain structure and the magnetization reversal of amorphous FeCoMoB microwires reflect the complex stress distribution introduced by the glass coating. Hence, the thickness of radial domain structure decreases with temperature and the temperature dependence of the switching field presents a discontinuous behavior. After nanocrystallization, the domain structure of FeCoMoB microwire is almost constant within the temperature range 10-400 K and the switching field decreases almost linearly with temperature mostly because of the decrease of saturation magnetization.     

Asymmetric Magnetization Reversal Probed by Recoil Loop Measurements inan Exchange Biased La0.67Sr0.33MnO3/La0.33Ca0.67MnO3 Bilayer Film

We exploit the recoil loop measurements to study La0.07 Sr0.33 Mn O3/La0.33 Ca0.67 Mn O3 bilayer film. the asymmetric magnetization reversal in an exchange-biased It is found that the recoil curve encloses a marked area only in the second quadrant of the hysteresis loop, and the recoil susceptibility in the descending branch of the major loop is evidently higher than that in the ascending branch. The study indicates that the exchange anisotropy of a unidirectional nature and an orientation deviated from the easy axis of the ferromagnetic layer plays a crucial role in creating the reversal asymmetry.     

Asymmetrically shaped hysteresis loop in exchange-biased FeNi/FeMn film

The magnetization reversal of the bilayer polycrystalline FeNi(50 Å)/FeMn(50 Å) film sputtered in a magnetic field has been studied by magnetic and magneto-optical techniques. The external magnetic fields were applied along the easy or hard magnetization axis of the ferromagnetic permalloy layer. The asymmetry of hysteresis loop has been found. Appreciable asymmetry and the exchange bias were observed only in the field applied along the easy axis. The specific features of magnetization reversal were explained within the phenomenological model that involves high-order exchange anisotropy and misalignment of the easy axes of the antiferromagnetic and ferromagnetic layers. It has been shown that the film can exist in one of three equilibrium magnetic states in the field applied along the easy axis. The transitions between these states occur as first-order phase transitions. The observed hysteresis loop asymmetry is related to the existence of the metastable state.     

Magnetization reversal mechanisms in hybrid resin-bonded Nd–Fe–B magnets

The magnetic properties of isotropic epoxy resin-bonded magnets prepared by mixing a hard magnetic powder made from melt quenched Nd–Fe–Co–B ribbons and a soft magnetic iron powder have been examined. The magnetization reversal processes and the magnetic parameters have been studied by the measurement of the virgin magnetization curves, the major and minor hysteresis loops and sets of recoil curves. From these recoil curves the field dependence of the reversible and irreversible magnetization components during the magnetization and demagnetization processes has been derived. The remanence relationship was used to study the nature of magnetic interaction between the grains. A study of interaction domains was conducted using optical microscopy. Groups of domains, each over several grains, were observed. It was found that the reversal process in the samples investigated involves the rotation of magnetization vectors in the iron powder grains and pinning of domain walls at the MQP-B grain boundaries.     

Recent advances in studies of magnetically soft amorphous microwires

In this paper, we present the giant magneto-impedance (GMI) effect (real part of longitudinal impedance, Z, and of the off-diagonal impedance) and hysteretic magnetic properties of amorphous glass-coated microwires with different compositions possessing nearly zero, positive and negative magnetostriction constant and metallic nucleus diameter ranging between 6 and 16 μm. Enhanced soft magnetic properties (low coercivity of about 4 A/m) and high-GMI effect have been observed in Co-rich microwires with vanishing magnetostriction constant. The magnetic anisotropy field of these microwires depends on the ratio between metallic diameter, d and total microwires diameter, D. Stress-sensitive magnetic properties have been obtained in Fe-rich microwires after stress annealing: hysteresis loop stress-annealed (SA) microwires drastically changes under applied stress. A variety of hysteresis loops with different hysteresis loops can be obtained in Fe-rich microwires changing the conditions (time and/or temperature) of the stress annealing. The obtained results allow us to tailor the microwire magnetic properties for magnetic sensors applications through selection of their composition and/or geometry and by thermal treatment.     

Cylindrical magnetization model for glass-coated microwires with circular anisotropy: Statics

The static magnetization profile of glass-coated microwires with effective circular anisotropy is investigated using micromagnetics. In this family of microwires, the ferromagnetic nucleus with an amorphous character presents a magnetic structure composed of an inner region with axial domains and an outer region with circular domains, due to magnetoelastic anisotropy. A one-dimensional micromagnetic model is developed, taking into account both the exchange and magnetoelastic anisotropy energies, and solved quasi analytically. The total energy, magnetization profiles and magnetization curves are investigated as a function of radius and anisotropy constant of the nucleus. This work represents a fundamental study of the magnetization process in these amorphous microwires and provides guidelines for the production of microwires with tailored magnetic properties. En passant, the nucleation problem in an infinite cylinder, introduced by W.F. Brown, is revisited.     

Asymmetric impedance in field-annealed Co-based amorphous wires and its bias field dependence

Giant magnetoimpedance (GMI) was measured in Joule heated Co_68.18Fe_4.32Si_12.5B₁₅ amorphous wires. Samples heat treated in open air showed an asymmetric giant magnetoimpedance (AGMI) behaviour. The AGMI profile, measured at selected frequency values and bias circumferential fields, can be related to the exchange bias interaction between the soft magnetic amorphous material and a harder magnetic crystalline phase formed on the surface of the wire. The present data show that AGMI behaviour take place owing to a soft magnetic layer with unidirectional anisotropy that develops in the surface of the wire.     

Composition-controlled exchange bias training effect in FeCr/IrMn bilayers

For FeCr/IrMn bilayers, the exchange bias training effect and the magnetization reversal mechanism are correlated to each other and depend on the composition of the ferromagnetic layer. For high Fe contents, the asymmetric magnetization reversal is observed. During the training effect, both exchange field and coercivity decrease monotonically, suggesting a type I training effect. For low Fe contents, the domain wall depinning takes place for the two hysteresis loop branches. Only exchange field diminution happens in the training effect. The coercivity almost does not change in the process, corresponding to a type II training effect. It is suggested that the motion of antiferromagnetic spins is modified by the magnetization reversal mechanism in the ferromagnetic layer.     

Cobalt antidot arrays on membranes: Fabrication and investigation with transmission X-ray microscopy

We have developed a method to fabricate ferromagnetic antidot arrays on silicon nitride membrane substrates for electron or soft X-ray microscopy with antidot periods ranging from 2 μm down to 200 nm. Observations of cobalt antidot arrays with magnetic soft X-ray microscopy show that for large periods, flux closure states occur between the antidots in the as-grown state and on application of a magnetic field, domain chains are created which show a spin configuration at the chain ends comprising four 90° walls. Pinning of the domain chain ends plays an important role in the magnetization reversal, determining the length of the chains and resulting in preservation of the domain chain configuration on reducing of the applied magnetic field to zero.     

The influence of finite size and shape anisotropy on exchange bias: A study of patterned Co/CoO nanostructures

The influence of finite dimensions on the exchange bias effect in patterned polycrystalline Co/CoO ferromagnet/antiferromagnet exchange bias systems was studied. Magnetization measurements on the smallest structures reveal that the exchange bias shift increases as the structure size becomes smaller. Off-specular neutron scattering experiments were used to study the asymmetric magnetization reversal behaviour.     

Soft X-ray resonant magnetic scattering studies on Fe/CoO exchange bias system

We have used soft X-ray resonant magnetic scattering (XRMS) to search for the presence of an effective ferromagnetic moment belonging to the antiferromagnetic (AF) layer which is in close contact with a ferromagnetic (F) layer. Taking advantage of the element specificity of the XRMS technique, we have measured hysteresis loops of both Fe and CoO layers of a CoO(40 Å)/Fe (150 Å) exchange bias bilayer. From these measurements we have concluded that the proximity of the F layer induces a magnetic moment in the AF layer. The F moment of the AF layer has two components: one is frozen and does not follow the applied magnetic field and the other one follows in phase the ferromagnetic magnetization of the F layer. The temperature dependence of the F components belonging to the AF layer is shown and discussed.     

Out-of-Plane Torque Influence on Magnetization Switching and Susceptibility in Magnetic Multilayers

Based on both the spin diffusion equation and the Landau-LlTshitz-Gilbert （LLG） equation, we demonstrate the influence of out-of-plane spin torque on magnetization switching and susceptibility in a magnetic multilayer system. The variation of spin accumulation and local magnetization with respect to time are studied in the magnetization reversal induced by spin torque. We also research the susceptibility subject to a microwave magnetic field, which is compared with the results obtained without out-of-plane torque.     

Dependence of Interlayer AF Coupling on Ferromagnetic Layer Thickness in [Pt/Co]5/Ru/[Co/Pt]5 Multilayers

We study magnetization reversal in the interlayer coupled [Pt/Co]5/Ru/[Co/Pt]5 multilayers （MLs） by means of the measurement of extraordinary Hall effect （EHE）. Fitting experimental data to a simple model, we determine the interlayer coupling strength for various thicknesses of the ferromagnetic layers at a fixed Ru spacer thickness. It is found that the dependence of interlayer coupling strength on the Pt layer thickness is much stronger than the previous report in the ferromagnetic/nonmagnetic/ferromagnetic multilayers.     

Magnetization reversal in perpendicular exchange-biased multilayers

Co/Pt multilayers with perpendicular magnetic anisotropy exhibit an exchange bias when covered with an IrMn layer. The exchange bias field, which is about 7 mT for 3 Co/Pt bilayer repetitions and a Co layer thickness of 5 Å, can be increased up to 16.5 mT by the insertion of a thin Pt layer at the Co/IrMn interface. The interfacial magnetic anisotropy of the Co/IrMn interface (KSCo/IrMn =-0.09 mJ/m2) favours in-plane magnetization and tends to tilt the Co spins away from the film normal. Dynamical measurements of the magnetization reversal process reveal that both thermally activated spin reversal in the IrMn layer and domain wall nucleation in the Co/Pt multilayer influence the interfacial spin structure and therefore the strength of the perpendicular exchange bias field.