Encapsulation and controlled release from core–shell nanoparticles fabricated by plasma polymerization

Core–shell nanostructures have been synthesized by plasma deposition in radio-frequency plasma reactor. Silica and KCl nanoparticles were encapsulated by deposition of isopropanol-based films of amorphous hydrogenated carbon. Through control of the deposition time, under constant deposition rate of 1 nm/min, particles are encapsulated in a layer of plasma polymer with thickness between 15 and 100 nm. Films are robust, chemically inert, thermally stable up to 250°C. The permeability of the shells is determined by depositing films of various thickness onto KCl nanoparticles and monitoring the dissolution of the core in aqueous solution. The dissolution profile is characterized by an initial rapid release, followed by a slow release that lasts up to 30 days for the thickest films. The profile is analyzed by Fickian diffusion through a spherical matrix. We find that this model captures very accurately the entire release profile except for the first 12 hours during which, the dissolution rate is higher than that predicted by the model. The overall diffusion coefficient for the dissolution of KCl is 3 × 10⁻²¹ m²/s.     

Synthesis of core–shell nanoparticles with a Pt nanoparticle core and a silica shell

A method to prepare a core–shell structure consisting of a Pt metal core coated with a silica shell (Pt(in)SiO₂) is described herein. A silica shell was grown on poly(vinylpyrrolidone) (PVP)-stabilized Pt nanoparticles 2–3 nm in size through hydrolysis and condensation reactions of tetraethyl orthosilicate (TEOS) in a water/ethanol mixture with ammonia as a catalyst. This process requires precise control of the reaction conditions to avoid the formation of silica particles containing multiple Pt cores and core-free silica. The length of PVP molecules, water content, concentration of ammonia and Pt nanoparticles in solution were found to significantly influence the core–shell structure. By optimizing these parameters, it was possible to prepare core–shell particles each containing a single Pt nanoparticle with a silica layer coating approximately 10 nm thick.     

Synthesis of NiAu alloy and core–shell nanoparticles in water-in-oil microemulsions

NiAu alloy nanoparticles with various Ni/Au molar ratios were synthesized by the hydrazine reduction of nickel chloride and hydrogen tetrachloroaurate in the microemulsion system. They had a face-centered cubic structure and a mean diameter of 6–13 nm, decreasing with increasing Au content. As Au nanoparticles did, they showed a characteristic absorption peak at about 520 nm but the intensity decreased with increasing Ni content. Also, they were nearly superparamagnetic, although the magnetization decreased significantly with increasing Au content. Under an external magnetic field, they could be self-organized into the parallel lines. In addition, the core–shell nanoparticles, Ni₃Au₁@Au, were prepared by the Au coating on the surface of Ni₃Au₁ alloy nanoparticles. By increasing the hydrogen tetrachloroaurate concentration for Au coating, the thickness of Au shells could be raised and led to an enhanced and red-shifted surface plasmon absorption.     

Synthesis and characterisation of highly fluorescent core–shell nanoparticles based on Alexa dyes

Current and future developments in the emerging field of nanobiotechnology are closely linked to the rational design of novel fluorescent nanomaterials, e.g. for biosensing and imaging applications. Here, the synthesis of bright near infrared (NIR)-emissive nanoparticles based on the grafting of silica nanoparticles (SNPs) with 3-aminopropyl triethoxysilane (APTES) followed by covalent attachment of Alexa dyes and their subsequent shielding by an additional silica shell are presented. These nanoparticles were investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM) and fluorescence spectroscopy. TEM studies revealed the monodispersity of the initially prepared and fluorophore-labelled silica particles and the subsequent formation of raspberry-like structures after addition of a silica precursor. Measurements of absolute fluorescence quantum yields of these scattering particle suspensions with an integrating sphere setup demonstrated the influence of dye labelling density-dependent fluorophore aggregation on the signaling behaviour of such nanoparticles.     

Synthesis-spectroscopic,optical and thermal properties of l-alanine ammonium chloride – A semiorganic crystal

Good quality single crystals of semiorganic nonlinear optical material l-alanine ammonium chloride was grown by slow evaporation technique. The grown crystals were characterized by single crystal X-ray diffraction to determine the unit cell parameters. The FTIR spectra were recorded to identify the various functional groups present in the compound. The optical quality of the grown crystal was analyzed by the UV–vis transmission studies. Thermogravimetric and differential thermal analysis reveal the good thermal stability of the material. The grown crystals have also been subjected to nonlinear optical property studies.     

Preparation and biocompatibility of electrospun poly(l-lactide-co-?-caprolactone)/fibrinogen blended nanofibrous scaffolds

Electrospun blended nanofibrous scaffolds were fabricated from an synthetic biodegradable polymer (poly(l-lactide-co-?-caprolactone): PLCL; 8% solution) and a natural protein (fibrinogen; 100 mg/ml solution) with different volume ratios. Results showed that the blended scaffolds consisted of nanoscale fibers with mean diameters ranging from 224 to 450 nm. The deposition of the fibrinogen amino groups on the surfaces of the blended scaffolds was confirmed by XPS. The hydrophilicity of the blended scaffolds were improved with the fibrinogen content increasing in the blended system. Cell viability assay and SEM results showed that human umbilical vein endothelial cells (HUVECs) had progressive growth and well spread morphology on the blended scaffolds. This study demonstrated that electrospun PLCL/fibrinogen blended scaffolds have potential application in tissue engineering.     

One-pot synthesis and characterization of rhodamine derivative-loaded magnetic core–shell nanoparticles

A new method to produce elaborate nanostructure with magnetic and fluorescent properties in one entity is reported in this article. Magnetite (Fe₃O₄) coated with fluorescent silica (SiO₂) shell was produced through the one-pot reaction, in which one reactor was utilized to realize the synthesis of superparamagnetic core of Fe₃O₄, the formation of SiO₂ coating through the condensation and polymerization of tetraethylorthosilicate (TEOS), and the encapsulation of tetramethyl rhodamine isothiocyanate-dextran (TRITC-dextran) within silica shell. Transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, and X-ray diffraction (XRD) were carried out to investigate the core–shell structure. The magnetic core of the core–shell nanoparticles is 60 ± 10 nm in diameter. The thickness of the fluorescent SiO₂ shell is estimated at 15 ± 5 nm. In addition, the fluorescent signal of the SiO₂ shell has been detected by the laser confocal scanning microscopy (LCSM) with emission wavelength (λ_em) at 566 nm. In addition, the magnetic properties of TRITC-dextran loaded silica-coating iron oxide nanoparticles (Fe₃O₄@SiO₂ NPs) were studied. The hysteresis loop of the core–shell NPs measured at room temperature shows that the saturation magnetization (M _s) is not reached even at the field of 70 kOe (7T). Meanwhile, the very low coercivity (H _c) and remanent magnetization (M _r) are 0.375 kOe and 6.6 emu/g, respectively, at room temperature. It indicates that the core–shell particles have the superparamagnetic properties. The measured blocking temperature (T _B) of the TRITC-dextran loaded Fe₃O₄@SiO₂ NPs is about 122.5 K. It is expected that the multifunctional core–shell nanoparticles can be used in bio-imaging.     

Synthesis of high quality and monodisperse CdS:Mn/ZnS and CdS:Mn/CdS core–shell nanoparticles

CdS:Mn²⁺/ZnS and CdS:Mn²⁺/CdS core–shell nanoparticles were synthesized in aqueous medium via chemical precipitation method in an ambient atmosphere. Polyvinylpyrrolidone (PVP) was used as a capping agent. The effect of the shell (ZnS and CdS) thickness on CdS:Mn²⁺ nanoparticles was investigated. Inorganically passivated core/shell nanocrystals having a core (CdS:Mn²⁺) diameter of 4 nm and a ZnS-shell thickness of ∼0.5 nm exhibited improved PL intensity. Optimum concentration of doping ions (Mn²⁺) was selected through optical study. For all the core–shell samples two emission peaks were observed, the first one is band edge emission in the lower wavelength side due to energy transfer to the Mn²⁺ ions in the crystal lattice; the second emission is characteristic peak of Mn²⁺ ions (⁴T₁ → ⁶A₁). The XRD, TEM and PL results showed that the synthesized core–shell particles were of high quality and monodisperse.     

Synthesis,optical, thermal and second harmonic generation studies of pure,urea and thiourea doped organic l-tartaric acid–nicotinamide (LTN) crystals

Nonlinear optical pure, urea and thiourea doped LTN crystals have been successfully grown from aqueous solution using slow evaporation technique. XRD analysis has been carried out to determine the lattice parameters of the pure and doped LTN crystals. The grown crystals were characterized by thermogravimetric analysis (TGA), differential thermal analysis (DTA), energy dispersive x-ray analysis (EDX) analysis and UV–vis–NIR spectroscopy. The fundamental modes of pure and doped crystals have been qualitatively assigned by FTIR analysis. The hardness of the grown crystals has been assessed and the results show the minor variation in the hardness value for the pure and doped LTN samples. Furthermore, second harmonic generation (SHG) measurements conducted indicate that the efficiency of thiourea doped LTN is 4.2 times greater than that of the KDP crystals and is suitable for frequency conversion applications.     

Synthesis and characterization of aqueous MPA-capped CdS–ZnS core–shell quantum dots

The novel CdS–ZnS core–shell nanoparticles are synthesized using simple one-step aqueous chemical approach. 3-mercaptopropionic acid (MPA) was used as the capping molecule. The structural and optical properties of the prepared samples are characterized by X-ray diffraction (XRD), UV–vis absorption spectroscopy, photoluminescence (PL) spectroscopy, energy-dispersive X-ray (EDX) and transition electron microscopy (TEM). The studies show that pH contributed noticeably to the growth and optical properties of nanoparticles. The TEM results indicate that the prepared particles have core–shell structure.     

Green synthesis and characterization of Au@Pt core–shell bimetallic nanoparticles using gallic acid

In this study, we developed a facile and benign green synthesis approach for the successful fabrication of well-dispersed urchin-like Au@Pt core–shell nanoparticles (NPs) using gallic acid (GA) as both a reducing and protecting agent. The proposed one-step synthesis exploits the differences in the reduction potentials of AuCl₄⁻ and PtCl₆²⁻, where the AuCl₄⁻ ions are preferentially reduced to Au cores and the PtCl₆²⁻ ions are then deposited continuously onto the Au core surface as a Pt shell. The as-prepared Au@Pt NPs were characterized by transmission electron microscope (TEM); high-resolution transmission electron microscope (HR-TEM); scanning electron microscope (SEM); UV-vis absorption spectra (UV-vis); X-ray diffraction (XRD); Fourier transmission infrared spectra (FT-IR). We systematically investigated the effects of some experimental parameters on the formation of the Au@Pt NPs, i.e., the reaction temperature, the molar ratios of HAuCl₄/H₂PtCl₆, and the amount of GA. When polyvinylpyrrolidone K-30 (PVP) was used as a protecting agent, the Au@Pt core–shell NPs obtained using this green synthesis method were better dispersed and smaller in size. The as-prepared Au@Pt NPs exhibited better catalytic activity in the reaction where NaBH₄ reduced p-nitrophenol to p-aminophenol. However, the results showed that the Au@Pt bimetallic NPs had a lower catalytic activity than the pure Au NPs obtained by the same method, which confirmed the formation of Au@Pt core–shell nanostructures because the active sites on the surfaces of the Au NPs were covered with a Pt shell.     

Fabrication of cyclodextrin-functionalized superparamagnetic Fe3O4/amino-silane core–shell nanoparticles via layer-by-layer method

This paper presents a feasible protocol for the preparation of a novel versatile nanocomposite possessing superparamagnetism via a layer-by-layer method. We combined (3-aminopropyl)triethoxysilane-coated magnetic Fe₃O₄ nanoparticles (APTES-MNPs) with β-cyclodextrin (β-CD). The following unusual features were integrated in a single nano-system: (a) the silane coating outside the magnetic Fe₃O₄ cores derived from the hydrolysis of APTES acted as a coupling agent and provided amino group (–NH₂) for linking the CD molecule; (b) the outermost CD moieties can function as inclusion sites and specific containers for drugs and biomolecules; (c) the innermost magnetic cores were able to sense and respond to an externally applied magnetic field and their behaviors in vivo or in vitro can be artificially manipulated and navigated. The obtained nanocomposite turned out to be superparamagnetic with a relatively high saturation magnetization value of 69 emu g^?1, which implies potentially promising applications in magnetic drug delivery technology and bioseparation.     

Anomalous infrared and visible light absorption and local structure of Ag–Au core/shell nanoparticles

We measured infrared and visible light absorption spectra and EXAFS for Ag–Au core/shell particles. The shell thickness and core diameter can be evaluated from the EXAFS results, which are almost consistent with those obtained using TEM. The influence of a thinner shell only slightly appeared in the visible absorption spectra, whereas the influence appeared strongly in the infrared absorption spectra. The spectra of the material in the vicinity of the particle surface appear in the infrared spectra. On the other hand, the spectra of the rather more internal material are observed in the visible spectra. It is thought that the influence of the core metal is different in the visible spectra from the infrared spectra. By considering the penetration depth, this phenomenon can be explained.     

Synthesis and characterization of aligned ZnO/MgO core–shell nanorod arrays on ITO substrate

ZnO/MgO core–shell nanorod arrays were synthesized successfully by the hydrothermal growth method. Photoluminescence (PL) emission from the nanorods showed remarkable enhancement after the growth of the MgO layer. The ZnO/MgO core–shell nanorods are type-I heterostructures, the electrons and holes of which are both confined in the core of the nanorods, as a result, leading to the increase of the photoluminescence intensity in this system. In addition, another reason for the enhancement of PL emission was the deposition of MgO shell suppression of surface defects. In addition, the activation energy (E _a) of 63 meV in the ZnO/MgO core–shell nanorods was obtained from temperature-dependent PL.     

One-step sonochemical syntheses of Ni@Pt core–shell nanoparticles with controlled shape and shell thickness for fuel cell electrocatalyst

We demonstrate a facile one-step method to synthesize Ni@Pt core–shell nanoparticles (NPs) with a control over the shape and the Pt-shell thickness of the NPs. By adjusting the relative reactivity of the Pt and Ni reagents in ultrasound-assisted polyol reactions, two Ni@Pt NP samples of the same composition (Ni/Pt = 1) and size (3–4 nm) but with different particle shape (octahedral vs. truncated octahedral) and different Pt-shell thicknesses (1–2 vs. 2–3 monolayer) are obtained. The control is achieved by using different Ni reagents, Ni(acac)₂ (acac = acetylacetonate) and Ni(hfac)₂ (hfac = hexafluoroacetylacetonate). A reaction mechanism that can explain all of the observations is proposed. The Ni@Pt NPs show up to threefold higher mass activity than pure Pt NPs in oxygen reduction reaction. Between the two Ni@Pt NP samples, the one composed of octahedral NPs with the thicker Pt-shell has higher activity than the other.     

Comparative study of core–shell iron/iron oxide gold covered magnetic nanoparticles obtained in different conditions

In this study, we report the synthesis and characterization of the core–shell Fe covered with Au shells nanoparticles with mean diameters between 5 and 8 nm. The inverse micelles method was utilized to produce the samples. X-ray diffraction studies show that both core–shell systems have the expected crystalline structure. High resolution transmission electron microscopy and atomic emission spectroscopy techniques give additional information concerning the structure and composition of nanoparticles. An intermediate shell of amorphous oxidized iron was found between the magnetic Fe core and the external gold shell. The magnetic behavior of different core–shell samples shows no hysteresis loop indicating the superparamagnetic behavior of Fe@Au systems. The superparamagnetic behavior is also evidenced from FC and ZFC dependences of the magnetization versus temperature. By using the temperature dependence of the thermoremanent magnetization combined with magnetization versus applied magnetic field, the effective anisotropy constant was determined. The Fe/Au interface contribution to the effective anisotropy constant was calculated and discussed in relation with the combined shape and stress anisotropies.     

Cell labeling and cytotoxicity of aqueously synthesized CdTe/CdS/ZnS core–shell–shell quantum dots by a water bath-hydrothermal method

CdTe/CdS/ZnS core–shell–shell quantum dots (QDs) were synthesized in aqueous solution via water-bathing combined hydrothermal method using L-cysteine as a stabilizer. The present method features markedly reduced synthesis time, higher fluorescent intensity and lower cytotoxicity of the QDs. Structural and spectroscopic properties of core–shell–shell QDs are well characterized by absorption and fluorescence spectroscopy, X-ray diffraction, transmission electron microscopy, and fourier transform infrared spectroscopy. Both CdS and ZnS shells were capped on the CdTe core and the fluorescence was greatly enhanced by the ZnS coating. The ternary QDs conjugated with transferrins were successfully employed for the biolabeling and fluorescent imaging of HeLa cells. Cytotoxicity evaluation shows that CdTe/CdS/ZnS was less toxic for cells than CdTe and CdTe/CdS due to the presence of a ZnS coating on surface, which inhibited the release of cadmium ions.     

The effect of thermal treatment on the atomic structure of core–shell PtCu nanoparticles in PtCu/C electrocatalysts

Physics of the Solid State - PtCu/C electrocatalysts with bimetallic PtCu nanoparticles were synthesized by successive chemical reduction of Cu2+ and Pt(IV) in a carbon suspension prepared based on...