Thermodynamics of binding of D-galactose and deoxy derivatives thereof to the L-arabinose-binding protein

We report the thermodynamics of binding of d-galactose and deoxy derivatives thereof to the arabinose binding protein (ABP). The "intrinsic" (solute-solute) free energy of binding DeltaG degrees (int) at 308 K for the 1-, 2-, 3-, and 6-hydroxyl groups of galactose is remarkably constant (approximately -30 kJ/mol), despite the fact that each hydroxyl group subtends different numbers of hydrogen bonds in the complex. The substantially unfavorable enthalpy of binding (approximately 30 kJ/mol) of 1-deoxygalactose, 2-deoxygalactose, and 3-deoxygalactose in comparison with galactose, cannot be readily accounted for by differences in solvation, suggesting that solute-solute hydrogen bonds are enthalpically significantly more favorable than solute-solvent hydrogen bonds. In contrast, the substantially higher affinity for 2-deoxygalactose in comparison with either 1-deoxygalactose or 3-deoxygalactose derives from differences in the solvation free energies of the free ligands.     

Mechanistic investigation of the oxygen-atom-transfer reactivity of dioxo-molybdenum(VI) complexes

The oxygen-atom-transfer (OAT) reactivity of [LiPrMoO2(OPh)] (1, LiPr=hydrotris(3-isopropylpyrazol-1-yl)borate) with the tertiary phosphines PEt3 and PPh2Me in acetonitrile was investigated. The first step, [LiPrMoO2(OPh)]+PR3-->[LiPrMoO(OPh)(OPR3)], follows a second-order rate law with an associative transition state (PEt3, DeltaH not equal=48.4 (+/-1.9) kJ mol-1, DeltaS not equal=-149.2 (+/-6.4) J mol-1 K-1, DeltaG not equal=92.9 kJ mol-1; PPh2Me, DeltaH not equal=73.4 (+/-3.7) kJ mol-1, DeltaS not equal=-71.9 (+/-2.3) J mol-1 K-1, DeltaG not equal=94.8 kJ mol-1). With PMe3 as a model substrate, the geometry and the free energy of the transition state (TS) for the formation of the phosphine oxide-coordinated intermediate were calculated. The latter, 95 kJ mol-1, is in good agreement with the experimental values. An unexpectedly large O-P-C angle calculated for the TS suggests that there is significant O-nucleophilic attack on the P--C sigma* in addition to the expected nucleophilic attack of the P on the Mo==O pi*. The second step of the reaction, that is, the exchange of the coordinated phosphine oxide with acetonitrile, [LiPrMoO(OPh)(OPR3)]+MeCN-->[LiPrMoO(OPh)(MeCN)]+OPR3, follows a first-order rate law in MeCN. A dissociative interchange (Id) mechanism, with activation parameters of DeltaH not equal=93.5 (+/-0.9) kJ mol-1, DeltaS not equal=18.2 (+/-3.3) J mol-1 K-1, DeltaG not equal=88.1 kJ mol-1 and DeltaH not equal=97.9 (+/-3.4) kJ mol-1, DeltaS not equal=47.3 (+/-11.8) J mol-1 K-1, DeltaG not equal=83.8 kJ mol-1, for [LiPrMoO(OPh)(OPEt3)] (2 a) and [LiPrMoO(OPh)(OPPh2Me)] (2 b), respectively, is consistent with the experimental data. Although gas-phase calculations indicate that the Mo--OPMe3 bond is stronger than the Mo--NCMe bond, solvation provides the driving force for the release of the phosphine oxide and formation of [LiPrMoO(OPh)(MeCN)] (3).     

Improved modification for the density-functional theory calculation of thermodynamic properties for C-H-O composite compounds

A three-parametric modification equation and the least-squares approach are adopted to calibrating hybrid density-functional theory energies of C(1)-C(10) straight-chain aldehydes, alcohols, and alkoxides to accurate enthalpies of formation DeltaH(f) and Gibbs free energies of formation DeltaG(f), respectively. All calculated energies of the C-H-O composite compounds were obtained based on B3LYP6-311++G(3df,2pd) single-point energies and the related thermal corrections of B3LYP6-31G(d,p) optimized geometries. This investigation revealed that all compounds had 0.05% average absolute relative error (ARE) for the atomization energies, with mean value of absolute error (MAE) of just 2.1 kJ/mol (0.5 kcal/mol) for the DeltaH(f) and 2.4 kJ/mol (0.6 kcal/mol) for the DeltaG(f) of formation.     

C(arenium)-C(alkyl) bond making and breaking: key process in the platinum-mediated C(aryl)-C(alkyl) bond formation. Analogies to organic electrophilic aromatic substitution

The reaction of cationic platinum aqua complexes 2 [Pt(C(6)H(2)[CH(2)NMe(2)](2)-E-4)(OH(2))](X') (X' = SO(3)CF(3), BF(4)) with alkyl halides RX gave various air-stable arenium complexes 3-5 containing a new C-C bond (R = Me, 3; Et, 4; Bn, 5). Electron-releasing oxo-substituents on the aromatic ligand (E = e.g., OH, b; OMe, c) enhance the reactivity of the aqua complex 2 and were essential for arenium formation from alkyl halides different from MeX. This process is initiated by oxidative addition of alkyl halides to the platinum(II) center of 2, which affords (alkyl)(aryl) platinum(IV) complexes (e.g., 9, alkyl = benzyl) as intermediates. Spectroscopic analyses provided direct evidence for a subsequent reversible 1,2-sigmatropic shift of the alkyl group along the Pt-C(aryl) bond, which is identical to repetitive C(arenium)-C(alkyl) bond making and breaking and concerted metal reduction and oxidation. Temperature-dependent NMR spectroscopy revealed DeltaH degrees = -1.3 (+/- 0.1) kJ mol(-1), DeltaS degrees = +3.8 (+/- 0.2) J mol(-1) K(-1), and DeltaG degrees (298) = -2.4 (+/- 0.1) kJ mol(-1) for the formation of the arenium complex 5b from 9 involving the migration of a benzyl group. The arenium complexes were transformed to cyclohexadiene-type addition products 7 or to demetalated alkyl-substituted arenes, 8, thus completing the platinum-mediated formation of a sp(2)-sp(3) C-C bond which is analogous to the aromatic substitution of a [PtX](+) unit by an alkyl cation R(+). The formation of related trimethylsilyl arenium complexes 6 suggests arenium complexes as key intermediates, not only in (metal-mediated) sp(2)-sp(3) C-C bond making and breaking but also in silyl-directed cyclometalation.     

Kinetic investigations of the process of encapsulation of small hydrocarbons into a cavitand-porphyrin

Exchange of guest molecules into capsule shaped host molecules is the most fundamental process in host-guest chemistry. Several examples of quantitative measurements of guest exchange rates have been reported. However, there have been no reports on the activation energies of these processes. A molecule known as cavitand-porphyrin (H2CP) has been reported to have a flexible host structure capable of facilitating moderate guest exchange rates suitable for kinetic measurements of the guest exchange process with 1H NMR. In this article, various kinetic and thermodynamic parameters related to the process of encapsulation of small hydrocarbons into H2CP in CDCl3 solution were determined by 2D exchange spectroscopy (EXSY): association and dissociation rate constants (k(ass) = 320 M-1 s-1, k(diss) = 1.4 s-1 for methane at 25 degrees C), the corresponding activation energies (E(a,ass) = 27 kJ.mol-1, E(a,diss) = 58 kJ.mol-1), and thermodynamic parameters for each process (DeltaG++(ass) = 59 kJ.mol-1, DeltaG++(diss) = 72 kJ.mol-1, DeltaH++(ass) = 25 kJ.mol-1, DeltaH++(diss) = 55 kJ.mol-1, DeltaS++(ass) = -113 J.K-1.mol-1, and DeltaH++(diss) = 58 J.K-1.mol-1 for methane). The thermodynamic parameters (DeltaG degrees = -13 kJ.mol-1, DeltaH degrees = -31 kJ.mol-1, DeltaS degrees = -60 J.K-1.mol-1 for methane) for this encapsulation equilibrium determined by EXSY were comparable to those for methane determined by 1D 1H NMR titration (DeltaG degrees = -11 kJ.mol-1, DeltaH degrees = -33 kJ.mol-1, DeltaS degrees = -75 J.K-1.mol-1 for methane). In addition, the structure of the methane encapsulation process was revealed by ab initio MO calculations. The activation energies for methane association/dissociation were estimated from MP2 calculations (E(a,ass) = 58.3 kJ.mol-1, E(a,diss) = 89.1 kJ.mol-1, and DeltaH degrees = -30.8 kJ.mol-1). These values are in accord with the experimentally determined values. The observed guest exchange rates and energies are compared with the corresponding values of various reported capsule-shaped hosts.     

Molecular mechanics study on conformation of perylene-quinonoid photosensitizers

Using molecular mechanics method,values of the heat of formation (HF) of different conformations,of perylenequinonoid photosensitizes hypocrellin A (HA) and hypocrellin B (HB) were calculated and the variance of HF after phenolic protons' dissociation were calculated as well The following was found:(i) The HF values of lour conformational isomers of HA and HB are similar to each other,so the four isomcrs can transform to each other room temperature,(ii) There exists the difference between the ability of dissociation of phenolic protons of HA and that of HB,the former is higher than the latter (iii) There exist two intramolecular hydrogen bonds in HA and HB The bond energy is approximately 8 kJ/mol and the energy of conformation Ⅰ is lower than that of conformationⅡ The bond energy of HA is lower than that of HB.(iv) There exists a low energy snot when phenolic hydroxyl bond twists 180° from the position where hydrogen bond is formed,which suggests that this kind of conformation probably exists,(v) Th     

Conformation of 18-Crown-5 and Its Influence on Complexation with Alkali and Ammonium Cations: Why 18-Crown-5 Binds More Than 1000 Times Weaker Than 18C6

Stability constants of potassium, sodium, and benzylammonium salts with 18C5 are determined in water, methanol, and acetonitrile by potentiometric titrations. The corresponding free energies DeltaG agree within the error with those obtained from calorimetric titrations. In comparison to 18C6 the DeltaG values are lower by 14 to 16 kJ/mol, with methanol or acetonitrile as solvent and K(+) or benzylammonium salts. Differences in the calorimetrically determined binding enthalpies DeltaH between 18C6 and 18C5 are usually even larger. In water, however, the DeltaG differences between the 18C5 and 18C6 complexes become almost negligible. The D(3)d-like conformation of such crown ethers can be evaluated for the first time by NOE methods using the less symmmetrical 18C5. The NMR data indicate also the absence of significant conformational changes upon complexation, in line with molecular mechanics calculations (CHARMm). These show that the low binding constants of K(+) with 18C5 are due to the expulsion of the cation due to one C-H bond pointing toward the cavity, leading to larger K(+).O distances. The CHARMm calculated gas phase energy difference between the K(+) crown complexes of 26 kJ/mol agrees approximately with experimental differences.     

Mechanism of homogeneous Ir(III) catalyzed regioselective arylation of olefins

The mechanism of hydroarylation of olefins by a homogeneous Ph-Ir(acac)(2)(L) catalyst is elucidated by first principles quantum mechanical methods (DFT), with particular emphasis on activation of the catalyst, catalytic cycle, and interpretation of experimental observations. On the basis of this mechanism, we suggest new catalysts expected to have improved activity. Initiation of the catalyst from the inert trans-form into the active cis-form occurs through a dissociative pathway with a calculated DeltaH(0 K)() = 35.1 kcal/mol and DeltaG(298 K)() = 26.1 kcal/mol. The catalytic cycle features two key steps, 1,2-olefin insertion and C-H activation via a novel mechanism, oxidative hydrogen migration. The olefin insertion is found to be rate determining, with a calculated DeltaH(0 K)() = 27.0 kcal/mol and DeltaG(298 K)() = 29.3 kcal/mol. The activation energy increases with increased electron density on the coordinating olefin, as well as increased electron-donating character in the ligand system. The regioselectivity is shown to depend on the electronic and steric characteristics of the olefin, with steric bulk and electron withdrawing character favoring linear product formation. Activation of the C-H bond occurs in a concerted fashion through a novel transition structure best described as an oxidative hydrogen migration. The character of the transition structure is seven coordinate Ir(V), with a full bond formed between the migrating hydrogen and iridium. Several experimental observations are investigated and explained: (a) The nature of L influences the rate of the reaction through a ground-state effect. (b) The lack of beta-hydride products is due to kinetic factors, although beta-hydride elimination is calculated to be facile, all further reactions are kinetically inaccessible. (c) Inhibition by excess olefin is caused by competitive binding of olefin and aryl starting materials during the catalytic cycle in a statistical fashion. On the basis of this insertion-oxidative hydrogen transfer mechanism we suggest that electron-withdrawing substituents on the acac ligands, such as trifluoromethyl groups, are good modifications for catalysts with higher activity.     

Spectroscopic studies on binding of 1-phenyl-3-(coumarin-6-yl)sulfonylurea to bovine serum albumin

The interaction of 1-phenyl-3-(coumarin-6-yl)sulfonylurea (SU22) with bovine serum albumin (BSA) has been investigated by fluorescence quenching spectroscopy combined with UV-absorption, circular dichroism (CD), Fourier transform infrared (FT-IR) spectroscopy techniques under simulative physiological conditions for the first time. Fluorescence data and UV-absorption spectra revealed that the quenching mechanism of fluorescence of BSA by SU22 was a static quenching process and the number of binding sites was about 0.8858; the thermodynamic parameters (DeltaG=-29.23 kJ mol(-1), DeltaH=-47.48 kJ mol(-1), and DeltaS=-61.24 J mol(-1)K(-1)) explained that hydrogen bond and Van der Waals interaction were the main binding force stabilizing the complex. The binding average distance between SU22 and BSA was obtained (3.20 nm) on the basis of the F?rster's theory. In addition, The CD spectra and FT-IR spectra have proved that BSA secondary structure changed in the presence of SU22 in aqueous solution.     

Interactions of cholesterol with cyclodextrins in aqueous solution

The interaction of cholesterol with several cyclodextrins (CDs) was investigated in water using solubility method. It was found that heptakis (2,6-di-O-methyl)-beta-CD (DOM-beta-CD) forms two types of soluble complex, with molar ratios of 1 : 1 and 1 : 2 (cholesterol : DOM-beta-CD), and neither a soluble nor insoluble complex is formed between cholesterol and alpha-CD, beta-CD, and gamma-CD, although a minor soluble complex formation was observed between cholesterol and 2-hydroxylpropyl-beta-CD. The thermodynamic parameters for 1 : 1 and 1 : 2 complex formation of cholesterol with DOM-beta-CD obtained from the changes in K with temperature are as follows: DeltaG degrees (1 : 1)=-11.6 kJ/mol at 25 degrees C (K(1 : 1)=1.09x10(2) M(-1)); DeltaH degrees (1 : 1)=-3.38 kJ/mol; TDeltaS degrees (1 : 1)=8.25 kJ/mol; DeltaG degrees (1 : 2)=-27.1 kJ/mol at 25 degrees C (K(1 : 2)=5.68x10(4) M(-1)); DeltaH degrees (1 : 2)=-3.96 kJ/mol; and TDeltaS degrees (1 : 2)=23.2 kJ/mol. The formation of the 1 : 2 complex occurred much more easily than that of the 1 : 1 complex. The driving force for 1 : 1 and 1 : 2 complex formation was considered to be mainly hydrophobic interaction. Also, based on the measurements of proton nuclear magnetic resonance spectra and studies with Corey-Pauling-Koltun atomic models, the probable structutures of the 1 : 2 complex were estimated.     

Synchronized fluxional motion and cyclometalation of ligands in platinum(II) complexes

Oscillation of the 2,9-dimethyl-1,10-phenanthroline (dmphen) ligand between nonequivalent exchanging sites in [Pt(Me)(dmphen)(P(o-tolyl)3)]+ and phosphane rotation around the Pt-P bond take place at the same rate. Thus, this cationic complex behaves as a molecular gear, exhibiting a fascinating synchronism between two otherwise independent fluxional motions. The process (DeltaG(3330)(#) = 68.5 +/- 0.2 kJ mol(-1)) was found to be unaffected by (i) the nature of various counteranions (X = PF6- 1, SbF6- 2, CF3SO3- 3, BF4- 4, BArf- 5), (ii) the polarity or the electron-donor properties of the solvent and, (iii) the addition of weak nucleophiles. Restricted phosphane rotation around the Pt-P bond impedes free dmphen oscillation in a 14-electron three-coordinate T-shaped intermediate, containing eta1-coordinated dmphen, generated by easy Pt-N bond dissociation from [Pt(Me)(dmphen)(P(o-tolyl)3)]+. 1-5 undergo easy orthoplatination, leading to new [Pt(dmphen){CH2C6H4P(o-tolyl)2-kappaC,P}]X cyclometalated Pt(II) compounds (X = PF6- 1, SbF6- 2, CF3SO3- 3, BF4- 4, BArf- 5). The kinetics of the cyclometalation of 3 and 4 were followed in tetrachloroethane by both 1H NMR and spectrophotometric techniques (kobs = 1.7 x 10-4 s(-1) at 333 K, DeltaH = 59.3 +/- 3 kJ mol(-1), and DeltaS = -141 +/- 8 J K(-1) mol(-1)). Ring opening of dmphen is again a prerequisite for C-H bond activation, which takes place through a multistep oxidative-addition reductive-elimination pathway. The molecular structure of cyclometalated 10 shows a butterfly shape with two o-tolyl rings projected above and below the coordination plane. Variable-temperature 1H NMR spectra revealed hindered rotation around the P-Cipso(o-tolyl) bonds at rather mild temperatures (DeltaG(3330)(#) = 55.2 +/- 0.4 kJ mol(-1)). Dmphen oscillation results very slowly and is dependent on the nature of the counteranions, of the solvents, and is strongly accelerated by the presence of weak nucleophiles that act as catalysts, according to an associative mode of activation.     

Direct calculation of interconversion barriers in dynamic chromatography and electrophoresis: Isomerization of captopril

Dynamic capillary electrophoresis (DCE) and direct calculation of the rate constants of isomerization has been applied to determine the cis-trans isomerization barriers of the angiotensin-converting enzyme inhibitor captopril. The separation of the rotational cis-trans isomeric drug has been performed in an aqueous 50 mM borate buffer at pH 9.3. Interconversion profiles featuring plateau formation, peak-broadening, and peak coalescence were observed. To determine the rate constants of the forward and backward reaction (k(cis-->trans) and k(trans-->cis)) of the isomerization process in dynamic capillary electrophoresis, a novel straightforward calculation method using the experimental parameters plateau height, h(plateau), peak width at half height w(h), the total migration times of the cis-trans isomers t(R) and the electroosmotic break-through time t(0) as well as the peak ratio of the cis-trans isomers is presented for the first time. From temperature dependent measurements the rate constants k(cis-->trans) and k(trans-->cis) and the kinetic activation parameters DeltaG( not equal), DeltaH( not equal), and DeltaS( not equal) of the cis-trans isomerization of captopril were obtained. From the activation parameters the isomerization barriers of captopril at 37 degrees C under basic conditions were calculated to be DeltaG( not equal) (cis-->trans) = 90.3 kJ.mol(-1)and DeltaG( not equal) (trans-->cis) = 90.0 kJ.mol(-1*).     

Thermodynamics of Inter- and Intramolecular Hydrogen Bonding in (Diphosphine)platinum(II) Diolate Complexes and Its Role in Carbohydrate Complexation Regioselectivity

Thermodynamic data are reported for intermolecular hydrogen-bonding association of 1 and 2 equiv of phenol with [1,3-bis(diphenylphosphino)propane](phenylethane-1,2-diolato)platinum(II) ((dppp)Pt(Ped)) in dichloromethane solution: = -7.0 +/- 0.1 kcal/mol, = -7.7 +/- 0.4 kcal/mol, = -11.3 +/- 0.4 eu, and = -17.8 +/- 1.2 eu. For comparison, the thermodynamics for hydrogen bonding of phenol to triphenylphosphine oxide in dichloromethane were also determined: DeltaH degrees = -5.1 +/- 0.3 kcal/mol; DeltaS degrees = -8.8 +/- 1.0 eu. Competitive coordination exchange reactions have been used to determine the apparent intramolecular hydrogen bond strengths in (dppp)Pt(1,2-O,O'-glycerolate) and (dppp)Pt(1,2-O,O'-butane-1,2,4-triolate) in both dichloromethane (DeltaG(313) = -2.05 +/- 0.05 and -2.52 +/- 0.06 kcal/mol, respectively) and pyridine (DeltaG(313) = -0.62 +/- 0.03 and -0.82 +/- 0.03 kcal/mol, respectively). Based on these findings, the role of hydrogen-bonding interactions in determining the regioselectivities of complexation of carbohydrates to diphosphine Pt(II) is discussed.     

Salt effects on poly(N-isopropylacrylamide) phase transition thermodynamics from NMR spectroscopy

NMR spectra were collected for cross-linked poly(N-isopropylacrylamide), poly(NIPAM), hydrogels in the presence of NaCl and CaCl2 aqueous solutions. Intensity variations in the 1H NMR signals of the polymer provide insight into the phase transition process. These data were used to observe a two-stage phase transition process. Thermodynamic quantities were obtained from a van't Hoff analysis of the temperature-dependent equilibrium constants, which were derived from the NMR data. The Delta H degrees and Delta S degrees values for the hydrogel in D2O are 3.4 kJ/mol and 11.2 J/mol.K for stage I, which is attributed to the formation of hydrophobic bonds between neighboring isopropyl groups. The formation of hydrogen bonds during stage II yielded Delta H degrees and Delta S degrees values of 14.8 kJ/mol and 48.4 J/mol.K in D2O. However, the corresponding Delta H degrees values in 150 mM NaCl and 150 mM CaCl2 are reduced to 1.5 and 1.8 kJ/mol for stage I of the dehydration process. This corresponds to the known effect of salts on hydrophobic bond energetics. The value of Delta S degrees also decreased to 4.9 and 5.9 J/mol.K in NaCl and CaCl2 solutions, respectively. However, the thermodynamic values during stage II were only slightly affected by the salts. The lower temperatures required to induce spontaneous precipitation implies that Delta G degrees of precipitation is reduced. With our measurement of equilibrium thermodynamics, we see that 150 mM NaCl and CaCl2 solutions have a greater effect on hydrophobic bond formation associated with the phase transition process. In this manner, these salts aid in solvent reorganization necessary to form the hydrophobic bond, and this suggests that the formation of hydrophobic bonds is a strong determining factor in the stability of poly(NIPAM) hydrogels in water.     

A kinetic study of the ring-opening process in tungsten carbonyl complexes containing hemilabile metallodithiolate ligands

The synthesis of the metallodithiolate derivative of tungsten pentacarbonyl from the reaction of photogenerated W(CO)(5)THF and Ni-1 ((1,5-bis(2-mercapto-2-methylpropane)-1,5-diazacyclooctanato)nickel(II)) is described, along with its crystal structure. In N,N-dimethylformamide solution, the pentacarbonyl exists in equilibrium with its tetracarbonyl analogue and carbon monoxide. The pentacarbonyl complex stereoselectively loses cis carbonyl ligands, as is apparent from (13)CO-labeling studies, where the thus-formed tetracarbonyl tungsten complex resulting from chelate ring-closure is preferentially (13)CO-labeled among the two mutually trans CO groups. The kinetics of the addition of CO to the tetracarbonyl to afford the metal pentacarbonyl were monitored by means of in situ infrared spectroscopy in the nu(CO) region at CO pressures between 28 and 97 bar and temperatures over the range 45-60 degrees C. Under these conditions, there was no evidence for W-S bond cleavage in the pentacarbonyl complex with concomitant formation of W(CO)(6). These studies reveal that the tetracarbonyl complex and CO are only slightly unstable with respect to the formation of the pentacarbonyl complex, with an equilibrium constant at 50 degrees C of about 2.8 M(-1) or DeltaG degrees = -1.4 kJ/mol. The activation parameters determined for the ring-opening process (DeltaH = 89.1 kJ/mol and DeltaS = -37.2 J/mol.K) suggest a solvent-assisted concerted ring-opening mechanism.     

Enthalpies of formation, bond dissociation energies and reaction paths for the decomposition of model biofuels: ethyl propanoate and methyl butanoate

The complete basis set method CBS-QB3 has been used to study the thermochemistry and kinetics of the esters ethyl propanoate (EP) and methyl butanoate (MB) to evaluate initiation reactions and intermediate products from unimolecular decomposition reactions. Using isodesmic and isogeitonic equations and atomization energies, we have estimated chemically accurate enthalpies of formation and bond dissociation energies for the esters and species derived from them. In addition it is shown that controversial literature values may be resolved by adopting, for the acetate radical, CH3C(O)O(.-), DeltaH(o)(f)298.15K) = -197.8 kJ mol(-1) and for the trans-hydrocarboxyl radical, C(.-)(O)OH, -181.6 +/- 2.9 kJ mol(-1). For EP, the lowest energy decomposition path encounters an energy barrier of approximately 210 kJ mol(-1) (approximately 50 kcal mol(-1)), which proceeds through a six-membered ring transition state (retro-ene reaction) via transfer of the primary methyl H atom from the ethyl group to the carbonyl oxygen, while cleaving the carbon-ether oxygen to form ethene and propanoic acid. On the other hand, the lowest energy path for MB has a barrier of approximately 285 kJ mol(-1), producing ethene. Other routes leading to the formation of aldehydes, alcohols, ketene, and propene are also discussed. Most of these intramolecular hydrogen transfers have energy barriers lower than that needed for homolytic bond fission (the lowest of which is 353 kJ mol(-1) for the C(alpha)-C(beta) bond in MB). Propene formation is a much higher energy demanding process, 402 kJ mol(-1), and it should be competitive with some C-C, C-O, and C-H bond cleavage processes.     

Nonisothermal decomposition kinetics and computational studies on the properties of 2,4,6,8-tetranitro-2,4,6,8-tetraazabicyclo[3,3,1]onan-3,7-dione (TNPDU)

The thermal decomposition and the nonisothermal kinetics of the thermal decomposition reaction of 2,4,6,8-tetranitro-2,4,6,8-tetraazabicyclo[3,3,1]onan-3,7-dione (TNPDU) were studied under the nonisothermal condition by differential scanning calorimetry (DSC) and thermogravimetry-derivative thermogravimetry (TG-DTG) methods. The kinetic model function in differential form and the value of Ea and A of the decomposition reaction of TNPDU are f(alpha) = 3(1 - alpha)[-ln(1 - alpha)](2/3), 141.72 kJ mol(-1), and 10(11.99) s(-1), respectively. The critical temperature of thermal explosion of the title compound is 232.58 degrees C. The values of DeltaS(++), DeltaH(++), and DeltaG(++) of this reaction are -15.50 J mol(-1) K(-1), 147.65 kJ mol(-1), and 155.26 kJ mol(-1), respectively. The theoretical investigation on the title compound as a structure unit was carried out by the DFT-B3LYP/6-311++G** method. The IR frequencies and NMR chemical shift were performed and compared with the experimental results. The heat of formation (HOF) for TNPDU was evaluated by designing isodesmic reactions. The detonation velocity (D) and detonation pressure (P) were estimated by using the well-known Kamlet-Jacobs equation, based on the theoretical densities and HOF. The calculation on bond dissociation energy suggests that the N-N bond should be the trigger bond during the pyrolysis initiation process.     

Interaction of heptakis (2,3,6-tri-O-methyl)-beta-cyclodextrin with cholesterol in aqueous solution

The interaction of cholesterol with heptakis (2,3,6-tri-O-methyl)-beta-cyclodextrin (TOM-beta-CyD) was investigated in water using solubility method. It was found that TOM-beta-CyD forms two kinds of soluble complexes, with molar ratios of 1:1 and 1:2 (cholesterol:TOM-beta-CyD). The thermodynamic parameters for 1:1 and 1:2 complex formation of cholesterol with TOM-beta-CyD were: DeltaG0(1:1)=-11.0 kJ/mol at 25 degrees C (K1:1=7.70 x 10 M(-1)); DeltaH0(1:1)=-1.28 kJ/mol; TDeltaS0(1:1)=9.48 kJ/mol; DeltaG0(1:2)=-27.8 kJ/mol at 25 degrees C (K1:2)=7.55 x 10(4) M(-1)); DeltaH0(1:2)=-0.57 kJ/mol; TDeltaS0(1:1)=27.3 kJ/mol. The formation of the 1:2 complex occurred much more easily than that of the 1:1 complex. The driving force for 1:1 and 1:2 complex formation was suggested to be exclusively hydrophobic interaction. Based on the measurements of proton nuclear magnetic resonance spectra and studies with Corey-Pauling-Koltun atomic models, the probable structures of the 1:2 complex were estimated. In addition, the interaction of TOM-beta-CyD with cholesterol was compared with that of heptakis (2,6-di-O-methyl)-beta-CyD (DOM-beta-CyD). The interaction of TOM-beta-CyD is more hydrophobic than that of DOM-beta-CyD, and the life time of the complexed TOM-beta-CyD is sufficiently long to give separated signals, at the NMR time scale, which differs from that of complexed DOM-beta-CyD.     

Kinetics of liquid-phase noncatalytic methanol hydrochlorination in hydrochloric acid

The kinetics of the liquid-phase noncatalytic hydrochlorination of methanol in hydrochloric acid is reported. The methyl chloride formation rate depends on the methanol concentration in hydrochloric acid and on the partial pressure of hydrogen chloride over hydrochloric acid. The activation energy of the reaction is 113 kJ/mol. The rate of the side process of dimethyl ether evolution is directly proportional to the methanol concentration and is inversely proportional to the partial pressure of hydrogen chloride over hydrochloric acid. The activation energy of the side reaction is about 33 kJ/mol. The results of the industrial implementation of methyl chloride synthesis from methanol and hydrochloric acid are in satisfactory agreement with the laboratory data.