Voltammetric determination of B<Subscript>1</Subscript> and B<Subscript>6</Subscript> vitamins using a pencil graphite electrode

Due to the importance of B₁ and B₆ vitamins for human health it is useful to develop new cheap and rapid methods for their determination. Voltammetric behavior of these vitamins on a pencil graphite electrode was investigated using cyclic voltammetry in different media. Direct quantitative determination of the two vitamins, one in the presence of the other, was done by differential pulse voltammetry. Vitamin B₁ was electroactive only in a NaOH solution generating two irreversible oxidation peaks; the first peak obtained at 250 mV is well-defined and was used in quantitative determinations. In case of vitamin B₆, a well-defined oxidation peak was observed in all investigated supporting electrolytes except for HCl. The linear concentration ranges were 10^?5–10^?3 M for vitamin B₁ in a NaOH solution and 5 × 10^?6–10^?3 M for vitamin B₆ in an acetate buffer solution. The obtained detection limits were 5.34 × 10^?6 M and 2.81 × 10^?6 M for vitamin B₁ and vitamin B₆, respectively. The developed method is simple and rapid and it was successfully applied in the determination of the two vitamins in pharmaceuticals.     

Photochemical substitution of benzene in the iron cyclohexadienyl complex [(η<Superscript>5</Superscript>-C<Subscript>6</Subscript>H<Subscript>7</Subscript>)Fe(η-C<Subscript>6</Subscript>H<Subscript>6</Subscript>)]<Superscript>+</Superscript>

The visible light irradiation of the [(η⁵-C₆H₇)Fe(η-C₆H₆)]⁺ cation (1) in acetonitrile resulted in the substitution of the benzene ligand to form the labile acetonitrile species [(η⁵-C₆H₇)Fe(MeCN)₃]⁺ (2). The reaction of 1 with Bu^tNC in MeCN produced the stable isonitrile complex [(η⁵-C₆H₇)Fe(Bu^tNC)₃]⁺ (3). The photochemical reaction of cation 1 with pentaphosphaferrocene Cp*Fe(η-cyclo-P₅) afforded the triple-decker cation with the bridging pentaphospholyl ligand, [(η⁵-C₆H₇)Fe(μ-η:η-cyclo-P₅)FeCp*]⁺ (4). The latter complex was also synthesized by the reaction of cation 2 with Cp*Fe(η-cyclo-P₅). The structure of the complex [3]PF₆ was established by X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2088–2091, November, 2007.     

Synthesis of IR phosphors based on germanatoborate Gd<Subscript>14</Subscript>Ge<Subscript>2</Subscript>B<Subscript>6</Subscript>O<Subscript>34</Subscript>

Processes of the formation of germanatoborates Gd₁₄B₆Ge₂O₃₄ and Gd_13.02Nd_0.98B₆Ge₂O₃₄ have been studied using different methods of synthesis (solid-state interaction, direct and inverse co-precipitation, self-propagating high-temperature synthesis (SHS)). It has been established that the synthesis of germanatoborates Gd₁₄B₆Ge₂O₃₄ and Gd_13.02Nd_0.98B₆Ge₂O₃₄ using the inverse precipitation and SHS methods occurs with the formation of an intermediate apatite-like phase, which upon heating to above 1100°С is reconstructed into the Ln₁₄B₆Ge₂O₃₄ (Ln = Gd, Nd) structure. The germanatoborates synthesized crystallize in the trigonal system (space group P3₁). The lattice parameters of Gd_13.02Nd_0.98B₆Ge₂O₃₄ are a = 9.746(4) Å and c = 25.795(13) Å. The thermal stability of the Gd₁₄B₆Ge₂O₃₄ and Gd_13.02Nd_0.98B₆Ge₂O₃₄ germanatoborates has been studied. The obtained materials of composition Gd_13.02Nd_0.98B₆Ge₂O₃₄ show luminescence properties and can be employed as infrared phosphors.     

Controlled synthesis,characterization and thermal properties of Mg<Subscript>2</Subscript>B<Subscript>2</Subscript>O<Subscript>5</Subscript>

Optimum conditions for synthesizing monoclinic and triclinic Mg₂B₂O₅ compounds by high-temperature solid-state reactions were investigated. Mixtures composed of boric acid and magnesium oxide at MgO:B₂O₃ mole ratios of 1:0.25, 1:0.5 and 1:1.5 were heated for 1 hour at temperatures between 600–1050°C and the formed phases were identified by XRD analysis. Monoclinic Mg₂B₂O₅ was formed by heating at 850°C for 4 hours together with minimum amounts of triclinic Mg₂B₂O₅, while triclinic Mg₂B₂O₅ was formed as a single phase at 1050°C for the same reaction time. The products obtained at optimum conditions were subjected to a series of tests to determine their chemical compositions, particle size distributions, surface area values, IR spectra and TG/DTA patterns.      

Validation of a screening method for the simultaneous identification of fat-soluble and water-soluble vitamins (A,E, B<Subscript>1</Subscript>, B<Subscript>2</Subscript> and B<Subscript>6</Subscript>) in an aqueous micellar medium of hexadecyltrimethylammonium chloride

Simultaneous determination of the fat-soluble vitamins A and E and the water-soluble vitamins B₁, B₂ and B₆ has been carried using a screening method from fluorescence contour graphs. These graphs show different colour zones in relation to the fluorescence intensity measured for the pair of excitation/emission wavelengths. The identification of the corresponding excitation/emission wavelength zones allows the detection of different vitamins in an aqueous medium regardless of the fat or water solubility of each vitamin, owing to the presence of a surfactant which forms micelles in water at the used concentration (over the critical micelle concentration). The micelles dissolve very water insoluble compounds, such as fat-soluble vitamins, inside the aggregates. This approach avoids the use of organic solvents in determining these vitamins and offers the possibility of analysing fat- and water-soluble vitamins simultaneously. The method has been validated in terms of detection limit, cut-off limit, sensitivity, number of false positives, number of false negatives and uncertainty range. The detection limit is about g L^–1. The screening method was applied to different samples such as pharmaceuticals, juices and isotonic drinks.     

DFT based insights into reactivity descriptors of encapsulated B<Subscript>24</Subscript>N<Subscript>24</Subscript> nanocages

The purpose of this study is to probe the DFT based chemical reactivity parameter, electrophilicity index as a possible molecular engineering of endohedral BN-nanocages. The structure and electronic properties of endohedral boron nitride nanocages have been investigated as a function of alkali atom inside the nanocage using density functional theory. We have calculated and analyzed basic characteristic related to the reactive behavior, such as HOMO–LUMO band gap, chemical hardness, chemical potential, vertical electron affinity, and vertical ionization potential, as well as the global electrophilicity index, ω(I, A) of the encapsulated B₂₄N₂₄ nanocages. We also investigated the MQZVP basis set effect on total electronic energy of the clusters.     

Hydrothermal Syntheses and Crystal Structures of Two New Heteropolyoxovanadoborates Containing {(VO)<Subscript>12</Subscript>O<Subscript>6</Subscript>[B<Subscript>3</Subscript>O<Subscript>6</Subscript>(OH)]<Subscript>6</Subscript>(H<Subscript>2</Subscript>O)} Cluster

Two new heteropolyoxovanadoborates (H₂dap)₂H₆{(VO)₁₂O₆[B₃O₆(OH)]₆(H₂O)}·13H₂O (1, dap = 1,2-diaminopropane) and {[Zn(dien)]₂[Zn(dien)(H₂O)]₄(VO)₁₂O₆[B₃O₆(OH)]₆(H₂O)}₂·15H₂O (2, dien = diethylenetriamine) have been hydrothermally synthesized and structurally characterized. Both 1 and 2 contain {(VO)₁₂O₆[B₃O₆(OH)]₆(H₂O)} cluster (denoted on V₁₂B₁₈), which is constructed by a puckered B₁₈O₃₆(OH)₆ ring sandwiched between two triangles of six alternating cis and trans edge-sharing vanadium atoms, and a central water molecule. 1 consists of discrete [V₁₂B₁₈]¹⁰⁻ cluster anions with H₂dap²⁺ as counterions, while 2 consists of discrete neutral {[Zn(dien)]₂[Zn(dien)(H₂O)]₄[V₁₂B₁₈]} clusters, which are built from two types of zinc(II) complex fragments connecting with V₁₂B₁₈ cluster through two Zn-(μ ₃-O)-B bonds. Interestingly, 2 is the only example of the V₁₂B₁₈ cluster decorated by two types of zinc(II) complex fragments.     

The saturated hydrides of C<Subscript>60</Subscript>:F<Subscript>5</Subscript>F<Subscript>6</Subscript> PK F<Subscript>5</Subscript>F<Subscript>7</Subscript> isomers

The carbon cages composed of pentagons and heptagons (F₅F₇ isomers) are the analogs of fullerenes composed of pentagons and hexagons (F₅F₆ isomers). To provide insight into the structures and stability of the hydrides of F₅F₆ and F₅F₇ isomers, systematical density functional theory calculations are performed on all the 1,812 F₅F₆–C₆₀H₆₀ and 56 F₅F₇–C₆₀H₆₀. The calculated results demonstrate that the isomer with lowest/highest energy has most/fewest fused pentagons for both F₅F₆ and F₅F₇ hydrides and the stability of these hydrides increase with the number of fused pentagons roughly. The lowest energy F₅F₆–C₆₀H₆₀ and F₅F₇–C₆₀H₆₀ are 237.1 and 152.5 kcal/mol lower in energy than the isolated pentagon rule (IPR) C₆₀H₆₀, respectively; however, these two parent cages are 529.6 and 660.0 kcal/mol higher in energy than the IPR C₆₀. The calculations suggest that heptagon-containing cages, not only those violating the IPR can be the candidate cages for fullerene derivatives and the possible repulsion between the added atoms may play an important role in determining the structures and stability of the hydrides of carbon cages.     

Relative Raman Intensities in C<Subscript>6</Subscript>H<Subscript>6</Subscript>, C<Subscript>6</Subscript>D<Subscript>6</Subscript>, and C<Subscript>6</Subscript>F<Subscript>6</Subscript>: A Comparison of Different Computational Methods

The accuracy of various computational methods (Hartree–Fock, MP2, CCSD, CAS-SCF, and several types of DFT) for predicting relative intensities in Raman spectra for C₆H₆, C₆D₆, and C₆F₆ was compared. The predicted relative intensities for ν₁ and ν₂ were compared with relative intensities measured by an FT-Raman spectrometer. While none of these methods excelled at this prediction, Hartree–Fock with a large basis set was most successful for C₆H₆ and C₆D₆, while PW91PW91 was the most successful for C₆F₆.     

LaRhAl,La<Subscript>3</Subscript>Rh<Subscript>3</Subscript>Al<Subscript>4</Subscript>, and Ce<Subscript>5</Subscript>Rh<Subscript>5</Subscript>Al<Subscript>6</Subscript> as a new family of ternary aluminides

The structures of three aluminides of similar composition are determined via X-ray diffraction. The structures consist of coordination polyhedra built of rhodium atoms that form alternating layers extending perpendicular to the short cell parameter. Compound Ce₅Rh₅Al₆ is built of fragments of the structures of LaRhAl and La₃Rh₃Al₄ in a ratio of 1: 1.     

Isothermal crystallization kinetics of Fe<Subscript>75</Subscript>Cr<Subscript>5</Subscript>P<Subscript>9</Subscript>B<Subscript>4</Subscript>C<Subscript>7</Subscript> metallic glass with cost-effectiveness and desirable merits

In this work, the isothermal crystallization kinetics of cost-effective Fe₇₅Cr₅P₉B₄C₇ metallic glass with a combination of desired merits synthesized by industrial ferro-alloys without high-purity materials was evaluated by Johnson–Mehl–Avrami approach using differential scanning calorimeter. The Avrami exponents at all isothermal annealing temperatures range from about 2.93 to 4.61, indicating a three-dimensional diffusion-controlled growth with an increasing nucleation rate during the isothermal crystallization. Meanwhile, the Avrami exponent firstly increases from 2.93 at the initial time to a maximum value of 4.61 and then decreases to 4.09 with the increment of the isothermal annealing temperature, which can be attributed to the atomic diffusion in the alloy. Additionally, the trend of the local Avrami exponent variations at different isothermal annealing temperatures reflects a variable crystallization mechanism during the crystallization process. Moreover, the local activation energy determined by Arrhenius equation gradually decreases from about 412 to 383 kJ mol^?1 during the present isothermal crystallization, further revealing that the process is dominated by a three-dimensional diffusion-controlled growth with an increasing nucleation rate, which provides useful insights into the formation of the present alloy.     

Crystallization kinetics and thermal stability of an amorphous Fe<Subscript>77</Subscript>C<Subscript>5</Subscript>B<Subscript>4</Subscript>Al<Subscript>2</Subscript>GaP<Subscript>9</Subscript>Si<Subscript>2</Subscript> bulk metallic glass

The thermal stability, kinetics and glass forming ability of an Fe₇₇C₅B₄Al₂GaP₉Si₂ bulk amorphous alloy have been studied by differential scanning calorimetry. The activation energy, frequency factor and rate constant corresponding to the multiple crystallization steps were determined by the Kissinger method. X-ray diffraction and transmission electron microscopy studies revealed that the crystallization starts with the primary precipitation of α-Fe from the amorphous matrix. The kinetics of nucleation of the α-Fe nanoparticles was investigated by two different methods, i.e. isothermal annealing and continuous heating after partial annealing.     

Thermodynamic properties of silicate glasses and melts: V. Systems CaB<Subscript>2</Subscript>O<Subscript>4</Subscript>-CaSiO<Subscript>3</Subscript> and Ca<Subscript>2</Subscript>B<Subscript>2</Subscript>O<Subscript>5</Subscript>-CaSiO<Subscript>3</Subscript>

Thermodynamic properties of melts of the CaB₂O₄-CaSiO₃ and Ca₂B₂O₅-CaSiO₃ systems were determined by the method of high-temperature mass-spectrometry. The melts of these systems are characterized by negative deviations from the ideal behavior at 1800 K.     

Electrical properties of triple molybdates Rb<Subscript>5</Subscript>LnHf(MoO<Subscript>4</Subscript>)<Subscript>6</Subscript>

Triple molybdates of the compositions Rb₅LnHf(MoO₄)₆ (5:1:2) and Rb₂LnHf₂(MoO₄)_6.5 (2:1:4), Ln = Ce-Lu, were prepared by solid-phase reactions. The temperature dependence of the electrical conductivity of the compounds Rb₅LnHf(MoO₄)₆ (5:1:2) at 200–500°C was studied.     

Carbon in boron carbide: The crystal structure of B<Subscript>11.4</Subscript>C<Subscript>3.6</Subscript>

A single crystal of boron carbide obtained from a self-propagating high-temperature synthesis (SHS) product was studied by X-ray crystallography: B_11.4C_3.6, a = 5.594(2) Å, c = 11.977(7) Å, V = 324.6(7) ų, space group R3m, Z = 3, ρ_calcd = 2.56 g/cm³, R = 0.048. The content of carbon in the single crystal was estimated at ～24 at % from analysis of the unit cell parameters, bond lengths, and the volume of B_{12 ? x} C _x icosahedra, which demonstrated the possibility of obtaining by SHS carbon-rich boron carbide crystals due to the substitution of carbon atoms for boron atoms in icosahedra. Comparison of the X-ray crystallographic data for single crystals of boron carbide with the results of quantum-chemical calculations (an ab initio method (the 3–21G basis set) with geometry optimization) showed that the C-B-C group in a crystal has a nonlinear structure.     

A novel metal chalcogenide: HgCd<Subscript>4</Subscript>S<Subscript>5</Subscript>

A novel metal chalcogenide HgCd₄S₅ (1) was synthesized from solid-state reactions and structurally characterized. Compound 1 crystallizes in the space group C222₁ of the orthorhombic system with four formula units in a cell: a = 12.5661(5) Å, b = 7.2551(5) Å, c = 10.7520(7) Å, V = 980.2(1) ų, Cd₄HgS₅, M _r = 810.49, D _c = 5.492 g/cm³, S = 1.010, μ(MoK _α) = 25.128 mm^?1, F(000) = 1408, R = 0.0611 and wR = 0.1495. Compound 1 is characterized by a 3-D cadmium sulfide framework structure with the infinite mercury sulfide chains located in the cavities.     

Voltammetric determination of vitamin B<Subscript>6</Subscript> (pyridoxine) at a graphite screen-printed electrode modified with graphene oxide/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript> nanocomposite

The preparation and study of electrochemical properties of a graphite screen-printed electrode (SPE) modified with the GO/Fe₃O₄@SiO₂ (GO is graphene oxide) nanocomposites are described. The morphologies of the GO/Fe₃O₄@SiO₂ nanocomposites were examined by scanning electron microscopy. The electrochemical oxidation of vitamin B₆ (pyridoxine) on SPE modified with the GO/Fe₃O₄@SiO₂ nanocomposite was investigated by cyclic voltammetry, differential pulse voltammetry, and chronoamperometry. Under optimum conditions (pH 7.0), the vitamin B₆ oxidation at the surface of the modified SPE occurs at a potential about 190 mV less positive than that at the unmodified SPE. A linear voltammetric response for vitamin B₆ was obtained in the concentration range 1.0?10 ⁶—9.0?10 ⁴ mol L^–1 with a detection limit of 5.2?10 ⁷ mol L^–1 using differential pulse voltammetry. The developed sensor was also successfully applied for determination of trace level of vitamin B₆ in both the standard vitamin B₆ sample and biological samples (urine).     

Organic-inorganic hybrid perovskite (C<Subscript>6</Subscript>H<Subscript>5</Subscript>(CH<Subscript>2</Subscript>)<Subscript>2</Subscript>NH<Subscript>3</Subscript>)<Subscript>2</Subscript>CdCl<Subscript>4</Subscript>: Synthesis,structural and thermal properties

The present research work reports the study on crystal structure, vibrational spectroscopy and thermal analysis of organic-inorganic hybrid compound (C₆H₅(CH₂)₂NH₃)₂CdCl₄. Single crystals of bis(phenethylammonium)tetrachlorocadmate (C₆H₅(CH₂)₂NH₃)₂CdCl₄ (PEA–Cd) were obtained by diffusion at room temperature. This compound crystallizes in the orthorhombic space group C2cb with unit cell parameters a = 7.4444(2) Å, b = 38.8965(3) Å, c = 7.3737(2) Å and Z = 4. Single crystal structure has been solved and refined to R = 0.036 and wR = 0.092. The structure consists of an extended [CdCl₄]^2– network and two [C₆H₅(CH₂)₂NH₃]⁺ cations to form a two-dimensional perovskite system. The infrared (IR) spectrum of the title compound was recorded at room temperature. Differential scanning calorimetry (DSC) was used to investigate the phase transition; this compound exhibits a reversible single solid-solid phase transition.     

Synthesis and crystal structure of ternary molybdate compound K<Subscript>5</Subscript>Pb<Subscript>0.5</Subscript>Hf<Subscript>1.5</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>6</Subscript>

Single crystals of triple molybdate of composition 5:1:3 K₅Pb_0.5Hf_1.5(MoO₄)₆ have been grown and their crystal structure has been solved from X-ray diffraction data (an automated diffractometer X8 APEX, MoK _α -radiation, 2173 F(hkl), R = 0.0321). Trigonal unit cell parameters are: a = b = 10.739(2) Å, c = 37.933(9) Å; V = 3789(1) ų, Z = 6, ρ_calc = 4.014 g/cm³, space group \(R\bar 3\). Three-dimensional mixed framework of the structure is formed by two types of MoO₄ tetrahedra and Pb and Hf octahedra linking via common O-vertices. Potassium atoms of three types occupy large vacancies in the framework.     

[Co(solv)<Subscript>6</Subscript>][B<Subscript>10</Subscript>H<Subscript>10</Subscript>] (solv = DMF and DMSO) for low-temperature synthesis of borides

The synthesis and structure of complexes [Co(solv)₆][B₁₀H₁₀] (solv = DMF and DMSO) have been reported. Both complexes have been prepared in a high yield by the reaction between cobalt(II) salts and closo-decaborates Cat₂[B₁₀H₁₀] in the corresponding solvent. The complexes have been characterized by elemental analysis, IR and UV spectroscopy, X-ray powder diffraction, and X-ray crystallography. The thermal properties of the compounds have been studied in the temperature range 20–600°C under argon. The conditions to form cobalt borides have been determined based on the results of thermal analysis, subsequent annealing of the complexes in various conditions, and analysis of IR spectra of the resulting thermolysis products.