Decomposition of Chlorinated Hydrocarbons on Iron-Group Metals

The decomposition of 1,2-dichloroethane and chlorobenzene on nickel–alumina, cobalt–alumina, and iron–alumina catalysts at 400–600°C was studied. Thermodynamic calculations demonstrated that the susceptibility of metals to chlorination under exposure to HCl increases in the order Ni < Co < Fe. The addition of hydrogen to the reaction mixture was found to dramatically decrease the rate of carbon deposition in the decomposition of 1,2-dichloroethane because of the intense hydrogenation of intermediates that are graphite precursors. Two fundamentally different reaction paths were found in the degradation of 1,2-dichloroethane: decomposition via a carbide-cycle mechanism with the formation of carbon as the main product (under conditions of a deficiency of hydrogen) and 1,2-dichloroethane hydrodechlorination accompanied by methanation of the formed carbon (under conditions of an excess of hydrogen). The degradation of chlorobenzene diluted with hydrogen in a molar ratio of 1 : 50 was not accompanied by carbon formation on the catalyst. A comparison between the selectivity for reaction products on nickel–alumina and cobalt–alumina catalysts indicated that the former catalyst is more active in the rupture of C–C bonds and in the methanation reaction of deposited carbon, whereas the latter is more favorable for hydrodechlorination. The optimum conditions and thermal regime for efficient and stable operation of the catalysts were found.     

Kinetics and Mechanism of the Heterogeneous Catalytic Hydrogenolysis of Chlorobenzenes and Chlorocyclohexanes

The catalytic hydrogenolysis of hexachlorobenzene and hexachlorocyclohexanes (isomer mixture) on a nickel–chromia catalyst and hexachlorobenzene hydrogenolysis intermediates (1,2,4,5-tetrachlorobenzene, 1,2,4-trichlorobenzene, 1,2-dichlorobenzene, and chlorobenzene) are studied. The hydrogenation of an aromatic ring does not occur in the presence of chemisorbed chlorine atoms on the catalyst surface. A reaction mechanism for chlorobenzene hydrogenation was proposed taking into account experimental evidence that, in the presence of chemisorbed chlorine on the catalyst surface, hydrogen in a dissociated state is firmly bound to the surface. It is found that the desorption of the resulting hydrogen chloride is the slowest step in chlorobenzene hydrogenolysis. The hydrogenolysis of hexachlorocyclohexanes occurs via a dehydrochlorination stage with the formation of trichlorobenzenes, which are subsequently converted into chlorobenzene and benzene.     

KMnO4-OP Chemiluminescence system for FIA determination of hydrogen peroxide

A fast and simple KMnO₄-OP chemiluminescence system for flow-injection analysis of hydrogen peroxide is described. When a mixture of sample and OP is injected into acidic KMnO₄, solution in a flow-cell, strong chemiluminescence occurs. The response is linear to the concentration of hydrogen peroxide in the range of 1.0 × 10^–8 to 6.0 × 10^–5 mol/l with 0.1 mol/l permanganate, and the upper limit of linear response could be extended to 6 × 10^–3 mol/l by increasing the permanganate concentration. The relative standard deviation of the method is between 1.6 and 2.3%. The detection limit is 6.0 × 10^–9 mol/l. This method is suitable for automatic and continuous analysis and has been successfully tested for determination of hydrogen peroxide in rain water. The chemiluminescence intensity was found to be remarkably enhanced in the presence of the OP micellar system.     

Silver nanoparticle assemblies supported on glassy-carbon electrodes for the electro-analytical detection of hydrogen peroxide

Electrochemical detection of hydrogen peroxide using an edge-plane pyrolytic-graphite electrode (EPPG), a glassy carbon (GC) electrode, and a silver nanoparticle-modified GC electrode is reported. It is shown, in phosphate buffer (0.05 mol L^–1, pH 7.4), that hydrogen peroxide cannot be detected directly on either the EPPG or GC electrodes. However, reduction can be facilitated by modification of the glassy-carbon surface with nanosized silver assemblies. The optimum conditions for modification of the GC electrode with silver nanoparticles were found to be deposition for 1 min at –0.5 V vs. Ag from 5 mmol L^–1 AgNO₃/0.1 mol L^–1 TBAP/MeCN, followed by stripping for 2 min at +0.5 V vs. Ag in the same solution. A wave, due to the reduction of hydrogen peroxide on the silver nanoparticles is observed at –0.68 V vs. SCE. The limit of detection for this modified nanosilver electrode was 2.0×10^–6 mol L^–1 for hydrogen peroxide in phosphate buffer (0.05 mol L^–1, pH 7.4) with a sensitivity which is five times higher than that observed at a silver macro-electrode. Also observed is a shoulder on the voltammetric wave corresponding to the reduction of oxygen, which is produced by silver-catalysed chemical decomposition of hydrogen peroxide to water and oxygen then oxygen reduction at the surface of the glassy-carbon electrode.     

Structure and Composition of the Anionic Chloride Complexes of Copper(II) as the Precursors of Catalysts for C–Cl Bond Metathesis

The chloride complexes of copper(II) (catalysts or catalyst precursors for various reactions of halogenated hydrocarbons) were characterized using electron, EPR, and EXAFS spectroscopy. It was found that chlorocuprates occur as mononuclear ([CuCl₄]^2–), binuclear ([Cu₂Cl₆]^2–), and, probably, polynuclear species in chlorobenzene solutions. The Cu–Cl bond length in [CuCl₄]^2– is 2.25 ± 0.2 Å, which is close to the same values for crystalline tetrachlorocuprates. It was assumed that the chloride complexes of copper with counterions occur as globules in chlorobenzene.     

The influence of small additives of arenes on low-temperature isobutylene polymerization in an aliphatic solvent

Isobutylene polymerization in hexane at –78 °C initiated by the methanol—aluminum bromide and tert-butyl chloride—aluminum bromide systems in the presence of minor additives (to 10 mmol L^–1) of arenes (benzene, chlorobenzene, toluene, and mesitylene) was studied. The addition of the arenes to a monomer solution has virtually no effect on the polymer yield, whereas the preliminary interaction of a concentrated solution of the Lewis acid with benzene and chlorobenzene sharply increases the monomer conversion and initiation efficiency. The results are interpreteted within a mechanism involving the participation of arene - and -complexes in initiation. The concentration of the complexes is determined by the order of arene addition, and the activity and stability are related to their nature. In these experiments, hexafluorobenzene unexpectedly exhibited a pronounced inhibiting ability.     

Effect of solidification temperature of lead alloy grids on the electrochemical behavior of lead-acid battery

One of the main electrochemical characteristics of a lead-acid battery is amount of water consumption. The effect of solidification temperature on electrochemical behavior (mainly hydrogen overvoltage) of Pb–Ca–Sn–Al (0.09%, Ca; 0.9%, Sn; 0.02%, Al) and Pb–Sb–Sn (1.7%, Sb; 0.24%, Sn) alloys, which are used in making the grid of lead-acid batteries, has been studied by cyclic voltammetry (CV) and linear sweep voltammety for different concentrations of sulfuric acid (ranging from 0.5 mol L^–1 to 4.0 mol L^–1). The morphology of the grid at some solidification temperatures was studied by optical microscopy. After one sweep of CV the surface of the electrode was investigated by using scanning electron microscopy.The results show that the potential of hydrogen evolution depends on the solidification temperature of the grids during production (mold temperature of grid casting). Also, at different solidification temperatures, different passivation phenomena, electrode surface constituents, and structure were observed.     

Thermodynamic Properties of Aqueous Solution of 2-Isopropoxyethanol at 25°C

Excess enthalpy, excess isobaric heat capacity, density, and speed of sound for aqueous 2-isopropoxyethanol solutions were measured at 25°C. The density was also measured at 20°C. The excess enthalpy was –800 J-mol^–1 at the minimum (mole fraction alcohol, x = 0.2), showing that the hydrogen bonds formed between unlike molecules are stronger than those in both pure liquid states. The excess volume also was large and negative, more than –1.2 cm³-mol^–1 at the minimum (x = 0.35). Excess isentropic and isothermal compressibilities are extremely negative. These results suggest that breaking the hydrogen bond network in water and forming the stronger hydrogen bonds between unlike molecules reduces the volume of the solution and makes the solution less compressible. The excess isobaric heat capacity is positive and large, up to 10 J-K^–1-mol^–1 and shows anomalous behavior in the neighborhood of x = 0.15.     

Rapid determination of telmisartan in pharmaceuticals and serum by the parallel catalytic hydrogen wave method

The polarographic characteristics of telmisartan have been investigated in 0.8 mol L^–1 NH₃.H₂O–NH₄Cl (pH 8.9)–0.01 mol L^–1 H₂O₂ as supporting electrolyte. The results demonstrate that the polarographic reduction wave at ca. –1.30 V in the absence of H₂O₂ is a catalytic hydrogen wave, and the reduction wave enhanced by H₂O₂ is a so-called parallel catalytic hydrogen wave. The analytical sensitivity of the parallel catalytic hydrogen wave is ca. 60 times higher than that of the corresponding catalytic hydrogen wave. Based on the parallel catalytic hydrogen wave a novel method has been developed for determination of telmisartan by linear sweep polarography. The calibration curve is linear in the range 2.0×10^–8–2.0×10^–6 mol L^–1 and the detection limit is 1.0×10^–8 mol L^–1. The precision is excellent with relative standard deviations of 2.6% at a concentration of 1.0×10^–7 mol L^–1 telmisartan. The proposed method has been applied to the direct determination of the telmisartan in capsule forms and biological samples. The proposed method has been proved to be advantageous over existing CZE and MEKC methods in simplicity, rapidity, and reproducibility.     

Simultaneous determination of sodium dodecyl sulphate and sodium linear-dodecylbenzenesulphonate with 1-stearyl-4-(4-aminonaphthylazo)-pyridinium bromide by spectrophotometry

A rapid and sensitive spectrophotometric method for the simultaneous determination of sodium dodecyl sulphate (SDS) and sodium linear-dodecylbenzenesulphonate (DBS) with 1-stearyl-4-(4-aminonaphthylazo)-pyridinium bromide (SAPB) is described using the difference at the maximum absorption wavelength of the SDS- and the DBS-ion associate. SDS and DBS have been determined independently by measuring their respective absorbances at the maximum absorption wavelength. The apparent molar absorptivities of the SDS- and the DBS-ion associate are 8.0×10⁴ l mol^–1 cm^–1 at 445 nm and 4.5×10⁴ l mol^–1 cm^–1 at 424 nm, respectively. The calibration graph for SDS is linear in the range from 0.1 to 1.0×10^–6 mol/l in the presence of 1.2×10^–6 mol/l DBS and for DBS from 0.8 to 2.0×10^–6 mol/l in the presence of 8.0×10^–7 mol/l SDS. The relative standard deviation (n=15) for 8.0×10^–7 mol/l SDS is 3.4% and for 1.6×10^–6 mol/l DBS 2.1%. The proposed method has been applied to the simulatenous determination of SDS and DBS in river water samples.     

A kinetic method of determination of cobalt in zinc and cadmium selenide

Summary A kinetic method of cobalt determination has been applied for the determination of this element in zinc and cadmium selenides. The method is based on the catalytic effect of cobalt on the oxidation of Direct Blue 6B (C. I. 24410) by hydrogen peroxide at pH=10.8 and in the presence of tiron as an activator. The trace amounts of cobalt have been separated from the bulk zink and cadmium by means of the ion exchanger Lewatit 5080. In samples of 20–100 mg cobalt can be determined in the range of 7.1·10^–5%–2.4·10^–4%.

---

Eine kinetische Methode zur Bestimmung von Kobalt in Zink- und Cadmiumselenid

Zusammenfassung Das Verfahren beruht auf dem katalytischen Effekt von Kobalt bei der Oxydation von Direkt Blau 6B (C. I. 24410) durch Wasserstoffperoxid bei pH 10,8 in Gegenwart von Tiron als Aktivator. Die Kobaltspuren wurden von der Hauptmenge Zink und Cadmium mit Hilfe des Ionenaustauschers Lewatit 5080 abgetrennt. In 20–100 mg Probe kann Kobalt in Mengen von 7,1·10^-5 bis 2,4·10^–4% bestimmt werden.

     

Viscosimetric Study of Some Cyclic Ethers with Benzene, Toluene, or Halobenzene

Experimental viscosities and the corresponding viscosity deviations for the binary mixtures of a cyclic ether (tetrahydrofuran, tetrahydropyran, 2-methyltetrahydrofuran, or 2,5-dimethyltetrahydrofuran) with benzene, toluene, fluorobenzene, or chlorobenzene are given at 25°C. The kinematic viscosities and the corresponding densities were measured with an uncertainty of ±10^{– 4} mm²-s^{– 1} and ±(5×10^{– 3}) kg-m^{– 3}, respectively. The viscosity data were correlated by the equations of Grunberg–Nissan, McAllister, and Heric. On the other hand, the results have been compared to the predictions, by the method proposed by Asfour.     

Nitriding of titanium with plasma jet under reduced pressure

The nitriding of titanium with argon-nitrogen (3%) and argon-nitrogen (3%)-hydrogen (2%) plasma jets at pressures of 190 torr was studied. The reaction kinetics obeyed mainly a parabolic law. The parabolic kinetic constants were 10^–10–10^–8 g² cm^–4 s^–1, which were 2–3 orders of magnitude larger than those in R.F. discharges. From emission spectroscopy, nitrogen atoms in the excited states were observed. The nitrogen atoms can promote the nitriding reaction. The effect of the addition of hydrogen to nitrogen is also briefly discussed.     

Highly sensitive spectrophotometric determination of osmium(VIII) with pyrogallolphthalein and hydrogen peroxide in the presence of Brij 35

Summary A highly sensitive determination of osmium(VIII) is based on the decolouring reaction with pyrogallolphthalein (gallein) and hydrogen peroxide in the presence of Brij 35. Beer's law was obeyed in the range of 0–0.5 ng of osmium(VIII) per 10 ml and the apparent decomposed absorption coefficient was 2.5×10⁹ l mol^–1 cm^–1 at 535 nm.Application of xanthene derivatives in analytical chemistry. Part XCIII. Part XCII see ref. [1]     

The Raman OH stretching bands of liquid water

In this work, from the discussion on water structure and clusters, it can be deduced that the OH stretching vibration is closely related to local hydrogen-bonded network for a water molecule, and different OH vibrations can be assigned to OH groups engaged in various hydrogen bonding. At ambient condition, the main local hydrogen bonding for a molecule can be classified as DDAA (double donor–double acceptor), DDA (double donor–single acceptor), DAA (single donor–double acceptor) and DA (single donor–single acceptor) and free OH vibrations. As for water at 290 K and 0.1 MPa pressure, the OH stretching region of the Raman spectrum can be deconvoluted into five sub-bands, which are located at 3014, 3226, 3432, 3572, and 3636 cm⁻¹, and can be assigned to ν_DAA-OH, ν_DDAA-OH, ν_DA-OH, ν_DDA-OH, and free OH₂ symmetric stretching vibrations, respectively.     

Cathodic Hydrogen Evolution from Aqueous Solutions of Acetic Acid

In continuation of the work on establishing hydrogen donors in the hydrogen evolution reaction from different acid molecules, cathodic evolution of hydrogen on silver is investigated from solutions of monobasic acetic acid with the aim to establish the origin of reduced hydrogen. Solutions of 0.2 M acetic acid with 0.2 M perchloric acid, neutralized to different pH values by NaOH, are used. The earlier established criterion is used for discerning between two possible hydrogen evolution mechanisms: (1) from dissociated hydrogen ions and (2) from undissociated hydrogen atoms in the molecule. At medium pH values, the undissociated acid molecules participate as hydrogen donors. Rate constants for reactions 1 and 2, evaluated at a potential of –800 mV (SCE), at which the entire pH range can be scanned, are 2.9 × 10^–6 and 1.9 × 10^–8.     

Catalytic determination of ultratrace amounts of Cu(II) by the oxidative coupling reaction of 3-methyl-2-benzothiazolinone hydrazone with N,N-dimethylaniline

Summary Copper (II) catalyzes the coupling reaction of 3-methyl-2-benzothiazolinone hydrazone (MBTH) with N,N-dimethylaniline (DMA) to form an intensely colored dye (_max=590 nm) in the presence of hydrogen peroxide and ammonia as an activator. On the basis of this reaction, a highly sensitive and selective catalytic method for Cu(II) has been developed. As little as 10^–9 M Cu(II) can be determined by measuring the absorbance of the reaction product at a fixed time (20 min at 40°C). Sandell's sensitivity calculated from the working curve is 1.3×10^–3 ng cm^–2. The method was applied to water analysis and some comments on the analysis of copper in river water were added.Presented at the 1st International Symposium on Kinetics in Analytical Chemistry, Córdoba, Spain, September 28th, 1983.     

35Cl NQR spectra of bis(chlorobenzene)chromium(0) and bis(chlorobenzene) chromium(I) iodide

Conclusion A study was carried out on the³⁵Cl NQR spectra of bis(chlorobenzene)chromium(O) and bis(chlorobenzene)chromium(I) iodide. The coordination of chlorobenzene with the charged ClC₆H₆Cr⁺ fragment leads to a sharp decrease in electron density. This effect is significantly greater than that resulting from the coordination of chlorobenzene with the ClC₆H₅Cr group in neutral bis(chlorobenzene)chromium.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2801–2803, December, 1986.     

Determination of water in furfural by infrared spectroscopy

The IR absorption band at 5250 cm^–1 is used to determine 0–5% water in furfural. The accuracy of the determination is not less than 5%. The method is suitable for any kind of furfural. The analytical results are unaffected by the presence of formic, acetic, and pyromucic acids, and methanol and ethanol.     

IR-analysis of H-bonded H2O on the pure TiO2 surface

The surface state of optically pure polydisperse TiO₂ (anatase and rutile) was determined by infra-red (IR) spectroscopy analysis in the temperature range of 100–453 K. Anatase A300 spectrum, contrary to rutile R300 one, has a broad three-component absorption band with peaks at 1048, 1137 and 1222 cm⁻¹ in the spectral range of δ(Ti–O–H) deformation vibrations. For rutile R300 we observed a very weak band at 1047 cm⁻¹, and for the thermal treated rutile R900 these bands were not appeared at all. The analysis of temperature dependencies for the mentioned absorption bands revealed the spectral shift of 1222 cm⁻¹ band towards the high frequencies, when the temperature increased, but the spectral parameters of 1137 and 1048 cm⁻¹ bands remained the same. The temperature of 1222 cm⁻¹ band maximum shift was 373–393 K and correlated with DSC data. Obtained results allowed to assign 1222 cm⁻¹ band to the deformation vibrations of OH-groups, bounded to the surface adsorbed water molecules by weak hydrogen bonds (5 kcal/mol). During the temperature growth these molecules desorbed, which also resulted in the intensity decreasing of stretching OH-groups vibration IR-bands at 3420 cm⁻¹. The destruction and desorption of surface water complexes led to Ti–O–H bond strengthening. IR bands at 1137 and 1048 cm⁻¹ were attributed to the stronger bounded adsorbed water molecules, which are also characterized with stretching OH-groups vibration bands at 3200 cm⁻¹. These surface structure were additionally stabilized by hydrogen bonds with the neighbouring TiO₂ lattice anions and other OH-groups, and desorbed at higher temperatures.